Set up Luna 7 HSM for Ranger KMS

How to integrate Cloudera Ranger Key Management System (KMS) software with the Luna 7 HSM appliance supplied by SafeNet.

This task describes how to set up the Luna 7 hardware security moudule (HSM) supplied by SafeNet. The process inlcudes setting up Luna 7 HSM on a client (host) and using Cloudera Manager to add configuration properties that enable Ranger KMS and Luna 7 HSM to interact.

You must:

Acquire the Luna 7 HSM from SafeNet.
If the Luna HSM module is configured for FIPS mode, you must add the following additional configuration option to the Luna client:
```
/usr/safenet/lunaclient/bin/configurator setValue -s Misc -e RSAKeyGenMechRemap -v 1
```
Have both Ranger KMS and a backend database to store keys installed in your environment.

See related topics for more information about installing Ranger KMS and a database to store keys.

Set Up the Luna 7 Client

Download Luna 7 client on the host where Ranger KMS service resides.
```
610-013144-006_SW_Client_SDK_SafeNet_HSM_7.3.0_Linux_RevA.tar
```
Untar the Luna 7 client.
```
tar -xf 610-013144-006_SW_Client_SDK_SafeNet_HSM_7.3.0_Linux_RevA.tar
```
the LunaClient_7.3.0-165_Linux/ folder gets created.
Navigate to the Luna client folder.
```
cd LunaClient_7.3.0-165_Linux/64/
```
In the Luna client folder, install Luna products and components.
```
bash install.sh
```
1. At the (y/n) prompt, choose y.
  
  If you select no or n, this product will not be installed.
2. At the Products prompt, choose Luna products to be installed:
  - [1]: Luna Network HSM
  - [2]: Luna PCIe HSM
  - [3]: Luna USB HSM
  - [4]: Luna Backup HSM
  - [N|n]: Next
  - [Q|q]: Quit
  Enter selection: 1, then enter selection n.
3. At the Components prompt, choose Luna Components to be installed
  - [1]: Luna SDK
  - [2]: Luna JSP (Java)
  - [3]: Luna JCProv (Java)
  - [B|b]: Back to Products selection
  - [I|i]: Install
  - [Q|q]: Quit
  Enter selection: i, then enter selection Q.
  
  Enter selection: 1,2,and 3 then type i.
Navigate to the Luna SA command directory.
```
cd /usr/safenet/lunaclient/bin
```
You should see the following:
ls
ckdemo cmu common configurator lunacm multitoken openssl.cnf plink pscp
salogin uninstall.sh vtl
Add a user to the hsmusers group.
```
sudo gpasswd --add kms hsmusers
```

Copy the Luna appliance server certificate to the client.

scp admin@<LunaBoxHostname>:server.pem

 scp e02paruser115@elab2.safenet-inc.com:server.pem . 
(grant permission chmod 777 and chown kms:kms)
The authenticity of host 'elab2.safenet-inc.com (192.43.161.62)' can't be established.
ECDSA key fingerprint is SHA256:Lz36zjWHh3BMtI9TVHUBGoHffxgA6azFtPSGRBCkiYU.

Are you sure you want to continue connecting (yes/no)? yes

Warning: Permanently added 'elab2.safenet-inc.com,192.43.161.62' (ECDSA) to the list of known hosts.
e02paruser115@elab2.safenet-inc.com's password:  SafeNetPSG95 (given by the luna hsm team)
  press enter
server.pem                                       100% 1155      1.1KB/s             00:00

Confirm that server.pem is added to the client.

ls

ckdemo cmu common configurator lunacm multitoken openssl.cnf plink pscp salogin server.pem uninstall.sh vtl

server.pem is added

As the KMS user, register the server with the client.
```
su -l kms
./vtl addServer -n <LunaBoxHostname> -c server.pem
```
```
 ./vtl addserver -n elab2.safenet-inc.com -c server.pem                    
```
vtl (64-bit) v7.3.0-165. Copyright (c) 2018 SafeNet. All rights reserved.

New server elab2.safenet-inc.com successfully added to server list.
Generate a client certificate.
```
./vtl  createCert -n  <ClientHostname>
```
```
 ./vtl createcert -n e02paruser115                    
```
vtl (64-bit) v7.3.0-165. Copyright (c) 2018 SafeNet. All rights reserved.

Private Key created and written to: /usr/safenet/lunaclient/cert/client/e02paruser115Key.pem. Certificate created and written to: /usr/safenet/lunaclient/cert/client/e02paruser115.pem .
(grant permission chmod 777 and chown kms:kms)

Copy the client certificate to the server.

scp /usr/safenet/lunaclient/cert/client/<ClientHostname>.pem admin@<LunaBoxHostname>:

scp /usr/safenet/lunaclient/cert/client/e02paruser115.pem e02paruser115@elab2.safenet-inc.com:
e02paruser115@elab2.safenet-inc.com's password: SafeNetPSG95
e02paruser115.pem                                                  100% 1172   201.7KB/s   00:00

ssh admin@<lunaboxhostname>

ssh e02paruser115@elab2.safenet-inc.com
e02paruser115@elab2.safenet-inc.com's password: SafeNetPSG95
Last login: Fri Jul 19 03:59:38 2019 from 114.143.87.94
Luna Network HSM Command Line Shell v7.3.0-165.
Copyright (c) 2018 SafeNet. All rights reserved.
[elab2] lunash:>

lunash:> client register -client <ClientHostname> -hostname <ClientHostname>

client register -client e02paruser115 -hostname e02paruser115

Check the existing partitions.

lunash:> partition list

lunash:> partition list
                        Storage (bytes)
                        ----------------------------
                        Partition            Name                   Objects   Total    Used    Free
                        ===========================================================================
                        1254277068838        elab2par058                  0  325896       0  325896

Assign client to the partition.

lunash:> client assignPartition -client <ClientHostname> -partition <GatewayPartition>

lunash:> client assignPartition -client e02paruser115 -partition elab2par058

client show -client e02paruser115

ClientID:     e02paruser115
Hostname:     e02paruser115
Partitions:   "elab2par058"

Log out from the Luna HSM.
```
lunash:> exit
```

Set the read permissions for the certificate files in the following directories.

chmod a+r /usr/safenet/lunaclient/cert/server/*.pem
chmod a+r /usr/safenet/lunaclient/cert/client/*.pem
(grant permission chmod 777 and chown kms:kms to above .pem files)

Verify that the client is connected to its assigned partition.

cd /usr/safenet/lunaclient/bin/
./vtl verify

[root@os-mv-711-1 bin]# ./vtl verify
vtl (64-bit) v7.3.0-165. Copyright (c) 2018 SafeNet. All rights reserved.
                        
The following Luna SA Slots/Partitions were found:
                       
Slot            Serial #                   Label
===========================================================================
0                1254277068842             elab2par115

./lunacm

./lunacm

[root@os-mv-711-1 bin]# ./lunacm
lunacm (64-bit) v7.3.0-165. Copyright (c) 2018 SafeNet. All rights reserved.
                        
Available HSMs:
                        
Slot ID ->           0
Label ->             elab2par115
Serial # ->          1254277068842
Model ->             LunaSA 7.3.0
Firmware version ->  7.3.0
Configuration ->     Luna User Partition with SD (PW) Key Export with Cleaning Mode
Slot Description ->  Net Token Slot
                        
Current Slot ID:  0

role login -n co
```
enter password: hanuman123
```

par con

If Master Key RangerKMSKey exists, then the following will be visible:

lunacm:>par con

    The 'Crypto Officer' is currently logged in. 
    Looking for objects accessible to the 'Crypto Officer'.
    
    Object List:

    Label:             RangerKMSKey
    Handle:            131 
    Object Type:       Symmentric Key
    Object UID:        ba8e00002e00000554380800

    Number of Objects: 1    

Command Result: No Error
Else
lunacm:>par con

    The 'Crypto Officer' is currently logged in. 
    Looking for objects accessible to the 'Crypto Officer'.
    
    No objects viewable to 'Crypto Officer' are currently stored in the partition.

Command Result: No Error

Navigate to the following directory on the Gateway.

# cd /usr/safenet/lunaclient/jsp/lib/
(grant permission chmod 777 and chown kms:kms to all the at this location)

Copy the Luna .JAR files over to the Gateway.

cp libLunaAPI.so Luna*.jar {JAVA_HOME}/jre/lib/ext/

cp libLunaAPI.so Luna*.jar /usr/java/jdk1.8.0_232-cloudera/jre/lib/ext

Set the file permissions for the JDK library as follows:

chmod a+r {JAVA_HOME}/jre/lib/

chmod a+r /usr/java/jdk1.8.0_232-cloudera/jre/lib/

Open the following file in a text editor:

vim {JAVA_HOME}/jre/lib/security/java.security

vim /usr/java/jdk1.8.0_232-cloudera/jre/lib/security/java.security

Add these two lines:

security.provider.6=com.safenetinc.luna.provider.LunaProvider
com.safenetinc.luna.provider.createExtractableKeys=true

replacing the line highlighted below:

Java SDK/JRE 1.6.x or 1.7.x installation to read as follows:
security.provider.1=sun.security.provider.Sun 
security.provider.2=sun.security.rsa.SunRsaSign 
security.provider.3=sun.security.ec.SunEC 
security.provider.4=com.sun.net.ssl.internal.ssl.Provider 
security.provider.5=com.sun.crypto.provider.SunJCE 
security.provider.6=com.safenetinc.luna.provider.LunaProvider
security.provider.7=sun.security.jgss.SunProvider 
security.provider.8=com.sun.security.sasl.Provider 
security.provider.9=org.jcp.xml.dsig.internal.dom.XMLDSigRI 
security.provider.10=sun.security.smartcardio.SunPCSC

Set the file permissions for the Luna client as follows:

chmod -R 777 /usr/safenet
chown kms:kms

Set KMS Configuration Properties.

In Cloudera Manager > Ranger KMS > Configs edit the following properties:

note
For CM-7.1.1 and CM-7.1.2 you must add properties to the dbks-site.xml, also known as
Ranger KMS Server Advanced Configuration Snippet (Safety Valve) for conf/dbks-site.xml .
```
ranger.ks.hsm.type = LunaProvider
ranger.ks.hsm.enabled = true
ranger.ks.hsm.partition.name=elab2par115
ranger.ks.hsm.partition.password=hanuman123
(CM-7.1.1 & CM-7.1.2 password will be in plain text)
```
note
For CM-7.1.3 and higher, update the configuration as shown in:
Figure 1. Adding Ranger KMS Configuration for Luna 7 HSM
Restart Ranger KMS from Cloudera Manager.

cd /usr/safenet/lunaclient/bin/
./lunacm
role login -n co

enter password: hanuman123

par con

lunacm:>par con

    The 'Crypto Officer' is currently logged in. 
    Looking for objects accessible to the 'Crypto Officer'.
    
    Object List:

    Label:             RangerKMSKey
    Handle:            131 
    Object Type:       Symmentric Key
    Object UID:        ba8e00002e00000554380800

    Number of Objects: 1    

Command Result: No Error

Ranger KMS is successfully started.

You can now create Encryption zone keys using hadoop command or from Ranger UI using credentials of keyadmin user.