Installing Cloudera Flow Management Operator for Kubernetes (air-gap)

You can install Cloudera Flow Management Operator for Kubernetes after meeting all prerequisites and installing dependencies, either using the cfmctl CLI tool or Helm.

Complete these steps to install Cloudera Flow Management Operator for Kubernetes if your Kubernetes cluster does not have internet access, or if you want to install it from a self-hosted registry. Installing Cloudera Flow Management Operator for Kubernetes installs the applications and resources that enable you to deploy and manage NiFi and NiFi Registry in Kubernetes.

Ensure that your Kubernetes environment meets requirements listed in System requirements.
A self-hosted Docker registry is required. Your registry must be accessible by your Kubernetes cluster.
Access to docker or equivalent utility that you can use to pull and push images is required. The following steps use docker. Replace commands where necessary.
Ensure that you have access to your Cloudera credentials (username and password). Credentials are required to access the Cloudera Archive and Cloudera Docker registry where installation artifacts are hosted.
Ensure that you have access to a valid Cloudera license.
Review the Helm chart reference before installation.
The Helm chart accepts various configuration properties that you can set during installation. Using these properties you can customize your installation.
A machine with Internet connectivity is required. While the Kubernetes cluster does not need internet access, you will need a machine to pull the images from the Cloudera Docker registry.

Obtain the installation artifacts that are relevant for your installation scenario and appropriate for your environment.


Artifact	Location	SHA
Cloudera Flow Management Operator for Kubernetes Docker image	container.repository.cloudera.com/cloudera/cfm-operator:2.10.0-b134	sha256:2be3de1edfc0e12b1007018031ec3bbdd226b0fd5f3ae01843ea3771dae4b090
Cloudera Flow Management Tini Docker image	container.repository.cloudera.com/cloudera/cfm-tini:2.10.0-b134	sha256:472cdbef2aaf33ba8755b8741866c4de753c8ff5f249ea757221868aa15ef1d3
cfmctl binaries	https://archive.cloudera.com/p/cfm-operator/cfmctl-darwin-amd64 https://archive.cloudera.com/p/cfm-operator/cfmctl-darwin-arm64 https://archive.cloudera.com/p/cfm-operator/cfmctl-linux-amd64 https://archive.cloudera.com/p/cfm-operator/cfmctl-linux-arm64 https://archive.cloudera.com/p/cfm-operator/cfmctl-windows-amd64 https://archive.cloudera.com/p/cfm-operator/cfmctl-windows-arm64
Cloudera Flow Management Operator for Kubernetes Helm chart	https://archive.cloudera.com/p/cfm-operator/cfm-operator-2.10.0-b134.tgz

Copy the installation artifacts to a local registry using the docker pull, docker tag, and docker push commands.

docker pull container.repository.cloudera.com/cloudera/cfm-operator:[***OPERATOR VERSION***]


docker tag container.repository.cloudera.com/cloudera/cfm-operator:[***OPERATOR VERSION***] [***PRIVATE REGISTRY[:PORT]/PATH/TAG:OPERATOR VERSION***]


docker push [***PATH TO SELF-HOSTED REGISTRY***]/cfm-operator:[***OPERATOR VERSION***]

For example:

docker pull container.repository.cloudera.com/cloudera/cfm-operator:2.10.0-b134


docker tag container.repository.cloudera.com/cloudera/cfm-operator:2.10.0-b134 us-central1-docker.pkg.dev/nifi/cfm-k8s/cfm-operator:2.10.0-b134


docker push us-central1-docker.pkg.dev/nifi/cfm-k8s/cfm-operator:2.10.0-b134

For more information on pulling, pushing, and tagging Docker images, see the Docker documentation.

Create a namespace for the Cloudera Flow Management Operator for Kubernetes if it does not already exist.
```
kubectl create namespace [***OPERATOR NAMESPACE***]
```
Replace [***OPERATOR NAMESPACE***] with the desired namespace for Cloudera Flow Management Operator for Kubernetes.
For example:
```
$ kubectl create namespace cfm-operator-system
```
Install cert-manager.
- OpenShift
- Helm
Follow the instructions for installing the cert-manager Operator for RedHat OpenShift.
helm install cert-manager jetstack/cert-manager \ --version [***CERT MANAGER VERSION***]\ --namespace cert-manager \ --create-namespace \ --set installCRDs=true

Replace [***CERT MANAGER VERSION***] with the certificate manager version you want to install.

note

For Cloudera Flow Management Operator for Kubernetes, there is no specific version requirement.
Create a Kubernetes secret containing your Cloudera credentials.
```
kubectl create secret docker-registry [***SECRET NAME***] \
  --namespace [***OPERATOR NAMESPACE***] \
  --docker-server [***CONTAINER REGISTRY***] \
  --docker-username [***USERNAME***] \
  --docker-password [***PASSWORD***]
```
Replace:
- [***SECRET NAME***] with the desired Kubernetes secret name.
- [***USERNAME***] and [***PASSWORD***] with your internal registry credentials.
- [***OPERATOR NAMESPACE***] with the Cloudera Flow Management Operator for Kubernetes installation namespace.
- [***CONTAINER REGISTRY***] with your internal registry URL.
Optional: Install the cfmctl CLI tool. While installing the tool is not strictly required for the operation of Cloudera Flow Management Operator for Kubernetes, it makes performing common tasks more convenient. The examples in this documentation make heavy use of the cfmctl CLI tool.
The cfmctl tool allows you to:
- Manage your environment
- Check the current state and existence of prerequisites in an environment
- Install and uninstall the operator
- Quickstart install NiFi clusters
- Perform common configuration tasks using flags, with the ability to provide a helmvalues.yaml file
- Install using default image location without the need to provide it manually
1. Copy the CLI tool version appropriate for your environment to the Cloudera Flow Management Operator for Kubernetes installation directory and run it.
2. Make the tool executable.
```
chmod +x [***CFMCTL FILE***]
```
  Replace [***CFMCTL FILE***] with the name of the executable file that you have downloaded.
Install Cloudera Flow Management Operator for Kubernetes.
- cfmctl
- Helm
Install Cloudera Flow Management Operator for Kubernetes using the cfmctl install command:
./cfmctl install --license [***LICENSE***] \ --image-repository "[***IMAGE REPOSITORY***]" \ --image-tag "[***OPERATOR VERSION***]" \ –values [***VALUES.YAML***] \ --namespace [***OPERATOR NAMESPACE***]
Replace

[***LICENSE***] with the license file. This flag is mandatory.

[***IMAGE REPOSITORY***] Defaults to “container.repository.cloudera.com/cloudera/cfm-operator” unless a Helm values.yaml is provided. This flag is optional.

[***OPERATOR VERSION***]Defaults to “latest” unless a Helm values.yaml is provided. This flag is optional.

[***VALUES.YAML***] with a Helm values.yaml file to supply any variables to the underlying Helm chart that is not available through cfmctl command flags. This flag is optional.

[***OPERATOR NAMESPACE***] with the desired operator installation namespace. Defaults to "cfm-operator-system".

This command installs the CustomResourceDefinitions and Helm chart for the operator, and starts the operator.
$ ./cfmctl install --license ./license.txt --image-repository "container.repository.cloudera.com/cloudera/cfm-operator" --image-tag "2.8.0-b94" 2024-06-11T21:22:19.678+0200 INFO cli.install cmd/install.go:90 installing chart {"namespace": "cfm-operator-system"} 2024-06-11T21:22:23.820+0200 INFO cli.install.helmclient cmd/install.go:162 creating 1 resource(s) 2024-06-11T21:22:24.601+0200 INFO cli.install.helmclient cmd/install.go:162 creating 18 resource(s) 2024-06-11T21:22:26.063+0200 INFO cli.install.helmclient cmd/install.go:162 beginning wait for 18 resources with timeout of 10m0s 2024-06-11T21:22:26.697+0200 INFO cli.install.helmclient cmd/install.go:162 Deployment is not ready: cfm-operator-system/cfm-operator. 0 out of 1 expected pods are ready … 2024-06-11T21:24:28.414+0200 INFO cli.install.helmclient cmd/install.go:162 release installed successfully: cfm-operator/cfm-operator-0.0.0-dev
Create your license secret.
kubectl create secret generic cfm-operator-license --from-file=license.txt=[***PATH/TO/LICENSE.TXT***] -n [***OPERATOR NAMESPACE***]
Replace

[***PATH/TO/LICENSE.TXT***] with the relative path to the license file

[***OPERATOR NAMESPACE***] with the namespace where you install Cloudera Flow Management Operator for Kubernetes

Run Helm install.
helm install cfm-operator [***PATH TO OPERATOR HELM CHART***] \ --create-namespace \ --namespace [***OPERATOR NAMESPACE***] \ --set installCRDs=true \ --set image.repository=[***IMAGE REPOSITORY***] \ --set image.tag=[***OPERATOR VERSION***] \ --set licenseSecret=cfm-operator-license --set "imagePullSecrets={[***DOCKER PULL SECRET***]}"
Replace

[***PATH TO OPERATOR HELM CHART***] with the path to the downloaded and unpacked Cloudera Flow Management Operator for Kubernetes Helm chart, for example,
./cfm-operator-2.10.0-b134.tgz

[***OPERATOR NAMESPACE***] with the desired installation namespace, for example,
cfm-operator-system

[***IMAGE REPOSITORY***] with the Cloudera Flow Management Operator for Kubernetes image repository.

If you install from the Cloudera Docker Registry, replace it with
container.repository.cloudera.com/cloudera/cfm-operator

If you install from a self-hosted private registry, replace it with your internal registry URL.

[***OPERATOR VERSION***] with your desired Cloudera Flow Management Operator for Kubernetes version, for example,
2.10.0

[***DOCKER PULL SECRET***] with the
Validate your installation.
1. Check if CustomResourceDefinitions for NiFi were installed or updated:
```
kubectl get crds | grep nifi
```
  Expect a similar output:
```
nifiregistries.cfm.cloudera.com 2024-01-25T21:31:28Z
nifis.cfm.cloudera.com 2024-01-25T21:31:29Z
```
2. Check if a Cloudera Flow Management Operator for Kubernetes pod is up and running:
```
kubectl get pods -n [***OPERATOR NAMESPACE***]
```
  Replace [***OPERATOR NAMESPACE***] with the namespace you created to deploy Cloudera Flow Management Operator for Kubernetes.
  Expect a similar output:
```
NAME                            READY   STATUS    RESTARTS   AGE
cfm-operator-545bfbc96b-sx4jt   2/2     Running   0          18m
```

With the operator installed and running, you can create and manage instances of NiFi and NiFi Registry by manipulating the Kubernetes object definitions.