Fixed Common Vulnerabilities and Exposures in ML Runtimes version 2026.08.1
Learn about the Common vulnerabilities and Exposures (CVEs) that were fixed in the ML Runtimes version 2026.08.1.
| CVE ID | Description |
|---|---|
| CVE-2017-11164 | In PCRE 8.41, the OP_KETRMAX feature in the match function in pcre_exec.c allows stack exhaustion (uncontrolled recursion) when processing a crafted regular expression. |
| CVE-2024-2511 | Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions Impact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue. |
| CVE-2024-4603 | Issue summary: Checking excessively long DSA keys or parameters may be very slow. Impact summary: Applications that use the functions EVP_PKEY_param_check() or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform various checks on DSA parameters. Some of those computations take a long time if the modulus (`p` parameter) is too large. Trying to use a very large modulus is slow and OpenSSL will not allow using public keys with a modulus which is over 10,000 bits in length for signature verification. However the key and parameter check functions do not limit the modulus size when performing the checks. An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. These functions are not called by OpenSSL itself on untrusted DSA keys so only applications that directly call these functions may be vulnerable. Also vulnerable are the OpenSSL pkey and pkeyparam command line applications when using the `-check` option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| CVE-2024-4741 | Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSL_free_buffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications. The SSL_free_buffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use. The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSL_free_buffers will succeed even though a record has only been partially processed and the buffer is still in use. The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSL_free_buffers will succeed even though the buffer is still in use. While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| CVE-2024-5535 | Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. |
| CVE-2024-6119 | Issue summary: Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address resulting in abnormal termination of the application process. Impact summary: Abnormal termination of an application can a cause a denial of service. Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address when comparing the expected name with an `otherName` subject alternative name of an X.509 certificate. This may result in an exception that terminates the application program. Note that basic certificate chain validation (signatures, dates, ...) is not affected, the denial of service can occur only when the application also specifies an expected DNS name, Email address or IP address. TLS servers rarely solicit client certificates, and even when they do, they generally don't perform a name check against a reference identifier (expected identity), but rather extract the presented identity after checking the certificate chain. So TLS servers are generally not affected and the severity of the issue is Moderate. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| CVE-2024-9143 | Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted explicit values for the field polynomial can lead to out-of-bounds memory reads or writes. Impact summary: Out of bound memory writes can lead to an application crash or even a possibility of a remote code execution, however, in all the protocols involving Elliptic Curve Cryptography that we're aware of, either only "named curves" are supported, or, if explicit curve parameters are supported, they specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent problematic input values. Thus the likelihood of existence of a vulnerable application is low. In particular, the X9.62 encoding is used for ECC keys in X.509 certificates, so problematic inputs cannot occur in the context of processing X.509 certificates. Any problematic use-cases would have to be using an "exotic" curve encoding. The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(), and various supporting BN_GF2m_*() functions. Applications working with "exotic" explicit binary (GF(2^m)) curve parameters, that make it possible to represent invalid field polynomials with a zero constant term, via the above or similar APIs, may terminate abruptly as a result of reading or writing outside of array bounds. Remote code execution cannot easily be ruled out. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| CVE-2024-10963 | A flaw was found in pam_access, where certain rules in its configuration file are mistakenly treated as hostnames. This vulnerability allows attackers to trick the system by pretending to be a trusted hostname, gaining unauthorized access. This issue poses a risk for systems that rely on this feature to control who can access certain services or terminals. |
| CVE-2024-12133 | A flaw in libtasn1 causes inefficient handling of specific certificate data. When processing a large number of elements in a certificate, libtasn1 takes much longer than expected, which can slow down or even crash the system. This flaw allows an attacker to send a specially crafted certificate, causing a denial of service attack. |
| CVE-2024-12243 | A flaw was found in GnuTLS, which relies on libtasn1 for ASN.1 data processing. Due to an inefficient algorithm in libtasn1, decoding certain DER-encoded certificate data can take excessive time, leading to increased resource consumption. This flaw allows a remote attacker to send a specially crafted certificate, causing GnuTLS to become unresponsive or slow, resulting in a denial-of-service condition. |
| CVE-2024-13176 | Issue summary: A timing side-channel which could potentially allow recovering the private key exists in the ECDSA signature computation. Impact summary: A timing side-channel in ECDSA signature computations could allow recovering the private key by an attacker. However, measuring the timing would require either local access to the signing application or a very fast network connection with low latency. There is a timing signal of around 300 nanoseconds when the top word of the inverted ECDSA nonce value is zero. This can happen with significant probability only for some of the supported elliptic curves. In particular the NIST P-521 curve is affected. To be able to measure this leak, the attacker process must either be located in the same physical computer or must have a very fast network connection with low latency. For that reason the severity of this vulnerability is Low. The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue. |
| CVE-2024-56406 | A heap buffer overflow vulnerability was discovered in Perl. Release branches 5.34, 5.36, 5.38 and 5.40 are affected, including development versions from 5.33.1 through 5.41.10. When there are non-ASCII bytes in the left-hand-side of the `tr` operator, `S_do_trans_invmap` can overflow the destination pointer `d`. $ perl -e '$_ = "\x{FF}" x 1000000; tr/\xFF/\x{100}/;' Segmentation fault (core dumped) It is believed that this vulnerability can enable Denial of Service and possibly Code Execution attacks on platforms that lack sufficient defenses. |
| CVE-2025-0395 | When the assert() function in the GNU C Library versions 2.13 to 2.40 fails, it does not allocate enough space for the assertion failure message string and size information, which may lead to a buffer overflow if the message string size aligns to page size. |
| CVE-2025-1390 | The PAM module pam_cap.so of libcap configuration supports group names starting with “@”, during actual parsing, configurations not starting with “@” are incorrectly recognized as group names. This may result in nonintended users being granted an inherited capability set, potentially leading to security risks. Attackers can exploit this vulnerability to achieve local privilege escalation on systems where /etc/security/capability.conf is used to configure user inherited privileges by constructing specific usernames. |
| CVE-2025-4565 | Any project that uses Protobuf Pure-Python backend to parse untrusted Protocol Buffers data containing an arbitrary number of recursive groups, recursive messages or a series of SGROUP tags can be corrupted by exceeding the Python recursion limit. This can result in a Denial of service by crashing the application with a RecursionError. We recommend upgrading to version =>6.31.1 or beyond commit 17838beda2943d08b8a9d4df5b68f5f04f26d901 |
| CVE-2025-4598 | A vulnerability was found in systemd-coredump. This flaw allows an attacker to force a SUID process to crash and replace it with a non-SUID binary to access the original's privileged process coredump, allowing the attacker to read sensitive data, such as /etc/shadow content, loaded by the original process. A SUID binary or process has a special type of permission, which allows the process to run with the file owner's permissions, regardless of the user executing the binary. This allows the process to access more restricted data than unprivileged users or processes would be able to. An attacker can leverage this flaw by forcing a SUID process to crash and force the Linux kernel to recycle the process PID before systemd-coredump can analyze the /proc/pid/auxv file. If the attacker wins the race condition, they gain access to the original's SUID process coredump file. They can read sensitive content loaded into memory by the original binary, affecting data confidentiality. |
| CVE-2025-5702 | The strcmp implementation optimized for the Power10 processor in the GNU C Library version 2.39 and later writes to vector registers v20 to v31 without saving contents from the caller (those registers are defined as non-volatile registers by the powerpc64le ABI), resulting in overwriting of its contents and potentially altering control flow of the caller, or leaking the input strings to the function to other parts of the program. |
| CVE-2025-6020 | A flaw was found in linux-pam. The module pam_namespace may use access user-controlled paths without proper protection, allowing local users to elevate their privileges to root via multiple symlink attacks and race conditions. |
| CVE-2025-6297 | It was discovered that dpkg-deb does not properly sanitize directory permissions when extracting a control member into a temporary directory, which is documented as being a safe operation even on untrusted data. This may result in leaving temporary files behind on cleanup. Given automated and repeated execution of dpkg-deb commands on adversarial .deb packages or with well compressible files, placed inside a directory with permissions not allowing removal by a non-root user, this can end up in a DoS scenario due to causing disk quota exhaustion or disk full conditions. |
| CVE-2025-6395 | A NULL pointer dereference flaw was found in the GnuTLS software in _gnutls_figure_common_ciphersuite(). When it reads certain settings from a template file, it can allow an attacker to cause an out-of-bounds (OOB) NULL pointer write, resulting in memory corruption and a denial of service (DoS) that could crash the system. |
| CVE-2025-8058 | The regcomp function in the GNU C library version from 2.4 to 2.41 is subject to a double free if some previous allocation fails. It can be accomplished either by a malloc failure or by using an interposed malloc that injects random malloc failures. The double free can allow buffer manipulation depending of how the regex is constructed. This issue affects all architectures and ABIs supported by the GNU C library. |
| CVE-2025-9230 | Issue summary: An application trying to decrypt CMS messages encrypted using password based encryption can trigger an out-of-bounds read and write. Impact summary: This out-of-bounds read may trigger a crash which leads to Denial of Service for an application. The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service or Execution of attacker-supplied code. Although the consequences of a successful exploit of this vulnerability could be severe, the probability that the attacker would be able to perform it is low. Besides, password based (PWRI) encryption support in CMS messages is very rarely used. For that reason the issue was assessed as Moderate severity according to our Security Policy. The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue, as the CMS implementation is outside the OpenSSL FIPS module boundary. |
| CVE-2025-9820 | A flaw was found in the GnuTLS library, specifically in the gnutls_pkcs11_token_init() function that handles PKCS#11 token initialization. When a token label longer than expected is processed, the function writes past the end of a fixed-size stack buffer. This programming error can cause the application using GnuTLS to crash or, in certain conditions, be exploited for code execution. As a result, systems or applications relying on GnuTLS may be vulnerable to a denial of service or local privilege escalation attacks. |
| CVE-2025-13151 | Stack-based buffer overflow in libtasn1 version: v4.20.0. The function fails to validate the size of input data resulting in a buffer overflow in asn1_expend_octet_string. |
| CVE-2025-14831 | A flaw was found in GnuTLS. This vulnerability allows a denial of service (DoS) by excessive CPU (Central Processing Unit) and memory consumption via specially crafted malicious certificates containing a large number of name constraints and subject alternative names (SANs). |
| CVE-2025-15281 | Calling wordexp with WRDE_REUSE in conjunction with WRDE_APPEND in the GNU C Library version 2.0 to version 2.42 may cause the interface to return uninitialized memory in the we_wordv member, which on subsequent calls to wordfree may abort the process. |
| CVE-2025-15467 | Issue summary: Parsing CMS AuthEnvelopedData or EnvelopedData message with maliciously crafted AEAD parameters can trigger a stack buffer overflow. Impact summary: A stack buffer overflow may lead to a crash, causing Denial of Service, or potentially remote code execution. When parsing CMS (Auth)EnvelopedData structures that use AEAD ciphers such as AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is copied into a fixed-size stack buffer without verifying that its length fits the destination. An attacker can supply a crafted CMS message with an oversized IV, causing a stack-based out-of-bounds write before any authentication or tag verification occurs. Applications and services that parse untrusted CMS or PKCS#7 content using AEAD ciphers (e.g., S/MIME (Auth)EnvelopedData with AES-GCM) are vulnerable. Because the overflow occurs prior to authentication, no valid key material is required to trigger it. While exploitability to remote code execution depends on platform and toolchain mitigations, the stack-based write primitive represents a severe risk. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the CMS implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue. OpenSSL 1.1.1 and 1.0.2 are not affected by this issue. |
| CVE-2025-30258 | In GnuPG before 2.5.5, if a user chooses to import a certificate with certain crafted subkey data that lacks a valid backsig or that has incorrect usage flags, the user loses the ability to verify signatures made from certain other signing keys, aka a "verification DoS." |
| CVE-2025-31115 | XZ Utils provide a general-purpose data-compression library plus command-line tools. In XZ Utils 5.3.3alpha to 5.8.0, the multithreaded .xz decoder in liblzma has a bug where invalid input can at least result in a crash. The effects include heap use after free and writing to an address based on the null pointer plus an offset. Applications and libraries that use the lzma_stream_decoder_mt function are affected. The bug has been fixed in XZ Utils 5.8.1, and the fix has been committed to the v5.4, v5.6, v5.8, and master branches in the xz Git repository. No new release packages will be made from the old stable branches, but a standalone patch is available that applies to all affected releases. |
| CVE-2025-32988 | A flaw was found in GnuTLS. A double-free vulnerability exists in GnuTLS due to incorrect ownership handling in the export logic of Subject Alternative Name (SAN) entries containing an otherName. If the type-id OID is invalid or malformed, GnuTLS will call asn1_delete_structure() on an ASN.1 node it does not own, leading to a double-free condition when the parent function or caller later attempts to free the same structure. This vulnerability can be triggered using only public GnuTLS APIs and may result in denial of service or memory corruption, depending on allocator behavior. |
| CVE-2025-32989 | A heap-buffer-overread vulnerability was found in GnuTLS in how it handles the Certificate Transparency (CT) Signed Certificate Timestamp (SCT) extension during X.509 certificate parsing. This flaw allows a malicious user to create a certificate containing a malformed SCT extension (OID 1.3.6.1.4.1.11129.2.4.2) that contains sensitive data. This issue leads to the exposure of confidential information when GnuTLS verifies certificates from certain websites when the certificate (SCT) is not checked correctly. |
| CVE-2025-32990 | A heap-buffer-overflow (off-by-one) flaw was found in the GnuTLS software in the template parsing logic within the certtool utility. When it reads certain settings from a template file, it allows an attacker to cause an out-of-bounds (OOB) NULL pointer write, resulting in memory corruption and a denial-of-service (DoS) that could potentially crash the system. |
| CVE-2025-40909 | Perl threads have a working directory race condition where file operations may target unintended paths. If a directory handle is open at thread creation, the process-wide current working directory is temporarily changed in order to clone that handle for the new thread, which is visible from any third (or more) thread already running. This may lead to unintended operations such as loading code or accessing files from unexpected locations, which a local attacker may be able to exploit. The bug was introduced in commit 11a11ecf4bea72b17d250cfb43c897be1341861e and released in Perl version 5.13.6 |
| CVE-2025-45582 | GNU Tar through 1.35 allows file overwrite via directory traversal in crafted TAR archives, with a certain two-step process. First, the victim must extract an archive that contains a ../ symlink to a critical directory. Second, the victim must extract an archive that contains a critical file, specified via a relative pathname that begins with the symlink name and ends with that critical file's name. Here, the extraction follows the symlink and overwrites the critical file. This bypasses the protection mechanism of "Member name contains '..'" that would occur for a single TAR archive that attempted to specify the critical file via a ../ approach. For example, the first archive can contain "x -> ../../../../../home/victim/.ssh" and the second archive can contain x/authorized_keys. This can affect server applications that automatically extract any number of user-supplied TAR archives, and were relying on the blocking of traversal. This can also affect software installation processes in which "tar xf" is run more than once (e.g., when installing a package can automatically install two dependencies that are set up as untrusted tarballs instead of official packages). |
| CVE-2025-61669 | Jupyter Server is the backend for Jupyter web applications. In jupyter_server versions through 2.17.0, the next query parameter in the login flow is insufficiently validated in `LoginFormHandler._redirect_safe()`, which allows redirects to arbitrary external domains via values such as `///example.com`. An attacker can use a crafted login URL to redirect users to a malicious site and facilitate phishing attacks. This issue is fixed in version 2.18.0. |
| CVE-2025-68160 | Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write. Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application. The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| CVE-2025-68973 | In GnuPG before 2.4.9, armor_filter in g10/armor.c has two increments of an index variable where one is intended, leading to an out-of-bounds write for crafted input. (For ExtendedLTS, 2.2.51 and later are fixed versions.) |
| CVE-2025-69418 | Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue. |
| CVE-2025-69419 | Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer. Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service. The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the forwarded capacity can be just two bytes. UTF8_putc() then returns -1, and this negative value is added to the output length without validation, causing the length to become negative. The subsequent trailing NUL byte is then written at a negative offset, causing write outside of heap allocated buffer. The vulnerability is reachable via the public PKCS12_get_friendlyname() API when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a different code path that avoids this issue, PKCS12_get_friendlyname() directly invokes the vulnerable function. Exploitation requires an attacker to provide a malicious PKCS#12 file to be parsed by the application and the attacker can just trigger a one zero byte write before the allocated buffer. For that reason the issue was assessed as Low severity according to our Security Policy. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue. OpenSSL 1.0.2 is not affected by this issue. |
| CVE-2025-69420 | Issue summary: A type confusion vulnerability exists in the TimeStamp Response verification code where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing a malformed TimeStamp Response file. Impact summary: An application calling TS_RESP_verify_response() with a malformed TimeStamp Response can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service. The functions ossl_ess_get_signing_cert() and ossl_ess_get_signing_cert_v2() access the signing cert attribute value without validating its type. When the type is not V_ASN1_SEQUENCE, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash. Exploiting this vulnerability requires an attacker to provide a malformed TimeStamp Response to an application that verifies timestamp responses. The TimeStamp protocol (RFC 3161) is not widely used and the impact of the exploit is just a Denial of Service. For these reasons the issue was assessed as Low severity. The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the TimeStamp Response implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue. OpenSSL 1.0.2 is not affected by this issue. |
| CVE-2025-69421 | Issue summary: Processing a malformed PKCS#12 file can trigger a NULL pointer dereference in the PKCS12_item_decrypt_d2i_ex() function. Impact summary: A NULL pointer dereference can trigger a crash which leads to Denial of Service for an application processing PKCS#12 files. The PKCS12_item_decrypt_d2i_ex() function does not check whether the oct parameter is NULL before dereferencing it. When called from PKCS12_unpack_p7encdata() with a malformed PKCS#12 file, this parameter can be NULL, causing a crash. The vulnerability is limited to Denial of Service and cannot be escalated to achieve code execution or memory disclosure. Exploiting this issue requires an attacker to provide a malformed PKCS#12 file to an application that processes it. For that reason the issue was assessed as Low severity according to our Security Policy. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| CVE-2025-69720 | The infocmp command-line tool in ncurses before 6.5-20251213 has a stack-based buffer overflow in analyze_string in progs/infocmp.c. |
| CVE-2026-0861 | Passing too large an alignment to the memalign suite of functions (memalign, posix_memalign, aligned_alloc, valloc, pvalloc) in the GNU C Library version 2.30 to 2.42 may result in an integer overflow, which could consequently result in a heap corruption. |
| CVE-2026-0864 | When using the "configparser" module to write configuration files containing multi-line text values with carriage return characters (\r) the resulting file could be injected with unexpected keys and values if the attacker controls the written value. |
| CVE-2026-0915 | Calling getnetbyaddr or getnetbyaddr_r with a configured nsswitch.conf that specifies the library's DNS backend for networks and queries for a zero-valued network in the GNU C Library version 2.0 to version 2.42 can leak stack contents to the configured DNS resolver. |
| CVE-2026-0994 | A denial-of-service (DoS) vulnerability exists in google.protobuf.json_format.ParseDict() in Python, where the max_recursion_depth limit can be bypassed when parsing nested google.protobuf.Any messages. Due to missing recursion depth accounting inside the internal Any-handling logic, an attacker can supply deeply nested Any structures that bypass the intended recursion limit, eventually exhausting Python’s recursion stack and causing a RecursionError. |
| CVE-2026-2219 | It was discovered that dpkg-deb (a component of dpkg, the Debian package management system) does not properly validate the end of the data stream when uncompressing a zstd-compressed .deb archive, which may result in denial of service (infinite loop spinning the CPU). |
| CVE-2026-2673 | Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected preferred key exchange group when its key exchange group configuration includes the default by using the 'DEFAULT' keyword. Impact summary: A less preferred key exchange may be used even when a more preferred group is supported by both client and server, if the group was not included among the client's initial predicated keyshares. This will sometimes be the case with the new hybrid post-quantum groups, if the client chooses to defer their use until specifically requested by the server. If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to interpolate the built-in default group list into its own configuration, perhaps adding or removing specific elements, then an implementation defect causes the 'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups were treated as a single sufficiently secure 'tuple', with the server not sending a Hello Retry Request (HRR) even when a group in a more preferred tuple was mutually supported. As a result, the client and server might fail to negotiate a mutually supported post-quantum key agreement group, such as 'X25519MLKEM768', if the client's configuration results in only 'classical' groups (such as 'X25519' being the only ones in the client's initial keyshare prediction). OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS 1.3 key agreement group on TLS servers. The old syntax had a single 'flat' list of groups, and treated all the supported groups as sufficiently secure. If any of the keyshares predicted by the client were supported by the server the most preferred among these was selected, even if other groups supported by the client, but not included in the list of predicted keyshares would have been more preferred, if included. The new syntax partitions the groups into distinct 'tuples' of roughly equivalent security. Within each tuple the most preferred group included among the client's predicted keyshares is chosen, but if the client supports a group from a more preferred tuple, but did not predict any corresponding keyshares, the server will ask the client to retry the ClientHello (by issuing a Hello Retry Request or HRR) with the most preferred mutually supported group. The above works as expected when the server's configuration uses the built-in default group list, or explicitly defines its own list by directly defining the various desired groups and group 'tuples'. No OpenSSL FIPS modules are affected by this issue, the code in question lies outside the FIPS boundary. OpenSSL 3.6 and 3.5 are vulnerable to this issue. OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released. OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released. OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| CVE-2026-3832 | A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted Online Certificate Status Protocol (OCSP) response during a TLS handshake. Due to a logic error in how gnutls processes multi-record OCSP responses, a client with OCSP verification enabled may incorrectly accept a revoked server certificate, potentially leading to a compromise of trust. |
| CVE-2026-3833 | A flaw was found in gnutls. This vulnerability occurs because gnutls performs case-sensitive comparisons of `nameConstraints` labels, specifically for `dNSName` (DNS) or `rfc822Name` (email) constraints within `excludedSubtrees` or `permittedSubtrees`. A remote attacker can exploit this by crafting a leaf certificate with casing differences in the Subject Alternative Name (SAN), leading to a policy bypass where a certificate that should be rejected is instead accepted. This could result in unauthorized access or information disclosure. |
| CVE-2026-4046 | The iconv() function in the GNU C Library versions 2.43 and earlier may crash due to an assertion failure when converting inputs from the IBM1390 or IBM1399 character sets, which may be used to remotely crash an application. This vulnerability can be trivially mitigated by removing the IBM1390 and IBM1399 character sets from systems that do not need them. |
| CVE-2026-4360 | In the Tarfile.extract() function, the filter parameter is not passed properly when extracting hardlinks. An affected system that extracts content from untrusted tar files could end up writing files with an unexpected uid/gid despite the user passing filter='data' to the extract() function. |
| CVE-2026-4367 | A flaw was found in libXpm. A local user with low privileges could exploit an Out-of-Bounds Read vulnerability in the `xpmNextWord()` function by processing a specially crafted or very small XPM (X PixMap) image file. This improper validation of file boundaries can cause an internal pointer to read beyond the file's end, leading to application crashes and Denial of Service conditions. |
| CVE-2026-4437 | Calling gethostbyaddr or gethostbyaddr_r with a configured nsswitch.conf that specifies the library's DNS backend in the GNU C Library version 2.34 to version 2.43 could, with a crafted response from the configured DNS server, result in a violation of the DNS specification that causes the application to treat a non-answer section of the DNS response as a valid answer. |
| CVE-2026-4438 | Calling gethostbyaddr or gethostbyaddr_r with a configured nsswitch.conf that specifies the library's DNS backend in the GNU C library version 2.34 to version 2.43 could result in an invalid DNS hostname being returned to the caller in violation of the DNS specification. |
| CVE-2026-4878 | A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation. |
| CVE-2026-5260 | A flaw was found in libgnutls. A remote attacker, by sending an extremely short premaster secret during an RSA key exchange to a server using an RSA key backed by a PKCS#11 token, could trigger a short heap overread. This memory corruption vulnerability could lead to information disclosure. |
| CVE-2026-5419 | A flaw was found in gnutls. The PKCS#7 padding check, performed during decryption, was not constant-time. This timing side-channel could allow a remote attacker to potentially leak sensitive information about the padding bytes through observable timing differences. This vulnerability is a form of information disclosure. |
| CVE-2026-5422 | A path traversal vulnerability exists in jupyter-server version 2.17.0 due to an incorrect root directory boundary check in the _get_os_path() function within jupyter_server/services/contents/fileio.py. The check uses startswith(root) without appending a trailing path separator, allowing sibling directories with names starting with the same prefix as root_dir to bypass the check. Additionally, the to_os_path() function in utils.py does not strip ".." from path parts, enabling traversal sequences to bypass the vulnerable check. This vulnerability can lead to unauthorized read/write access to files in sibling directories, potentially exposing sensitive data in shared hosting environments. |
| CVE-2026-5435 | The deprecated functions ns_printrrf, ns_printrr and fp_nquery in the GNU C Library version 2.2 and newer fail to enforce the caller-supplied buffer length, and can result in an out-of-bounds write when printing TSIG records. |
| CVE-2026-5704 | A flaw was found in tar. A remote attacker could exploit this vulnerability by crafting a malicious archive, leading to hidden file injection with fully attacker-controlled content. This bypasses pre-extraction inspection mechanisms, potentially allowing an attacker to introduce malicious files onto a system without detection. |
| CVE-2026-5745 | A flaw was found in libarchive. A NULL pointer dereference vulnerability exists in the ACL parsing logic, specifically within the archive_acl_from_text_nl() function. When processing a malformed ACL string (such as a bare "d" or "default" tag without subsequent fields), the function fails to perform adequate validation before advancing the pointer. An attacker can exploit this by providing a maliciously crafted archive, causing an application utilizing the libarchive API (such as bsdtar) to crash, resulting in a Denial of Service (DoS). |
| CVE-2026-5958 | When sed is invoked with both -i (in-place edit) and --follow-symlinks, the function open_next_file() performs two separate, non-atomic filesystem operations on the same path: 1. resolves symlink to its target and stores the resolved path for determining when output is written, 2. opens the original symlink path (not the resolved one) to read the file. Between these two calls there is a race window. If an attacker atomically replaces the symlink with a different target during that window, sed will: read content from the new (attacker-chosen) symlink target and write the processed result to the path recorded in step 1. This can lead to arbitrary file overwrite with attacker-controlled content in the context of the sed process. This issue was fixed in version 4.10. |
| CVE-2026-6238 | The deprecated functions ns_printrrf, ns_printrr and fp_nquery in the GNU C Library version 2.2 and newer fail to validate the RDATA content against the RDATA length in a DNS response when processing LOC, CERT, TKEY or TSIG records, which may allow an attacker to craft a DNS response, causing a target application to crash or read uninitialized memory. These functions are for application debugging only and hence not in the path of code executed by the DNS resolver. Further, they have been deprecated since version 2.34 and should not be used by any new applications. Applications should consider porting away from these interfaces since they may be removed in future versions. |
| CVE-2026-6657 | A vulnerability in jupyter-server versions 1.12.0 through 2.17.0 allows an attacker to bypass CORS origin validation when the `allow_origin_pat` configuration is used. The issue arises from the use of `re.match()` for validating the `Origin` header, which only anchors at the start of the string. This allows attacker-controlled domains such as `trusted.example.com.evil.com` to pass validation against patterns intended to match `trusted.example.com`. The vulnerability affects multiple locations in the codebase, including CORS headers, WebSocket connections, referer validation, and login redirects, potentially enabling phishing attacks, arbitrary code execution, and unauthorized access to sensitive API responses. |
| CVE-2026-7383 | Issue summary: A signed integer overflow when sizing the destination buffer for Unicode output in ASN1_mbstring_ncopy() can lead to a heap buffer overflow. Impact summary: A heap buffer overflow may lead to a crash or possibly attacker controlled code execution or other undefined behaviour. In ASN1_mbstring_copy() and ASN1_mbstring_ncopy() the destination size for Unicode output is computed in a signed int: by left shift of the input character count for BMPSTRING (UTF-16) and UNIVERSALSTRING (UTF-32), and by summing per-character byte counts for UTF8STRING. The calculation overflows when the input reaches around 2^30 characters. In the worst case (UNIVERSALSTRING at 2^30 characters) the size wraps to zero, OPENSSL_malloc(1) is called, and the subsequent character copy writes several gigabytes past the one-byte allocation. X.509 certificate processing routes through ASN1_STRING_set_by_NID(), whose DIRSTRING_TYPE mask excludes UNIVERSALSTRING and whose per-NID size limits cap the input length; no network protocol or certificate-handling path in OpenSSL exercises the overflow. Triggering the bug requires an application that calls ASN1_mbstring_copy() or ASN1_mbstring_ncopy() directly, or registers a custom string type via ASN1_STRING_TABLE_add(), with attacker-controlled input on the order of half a gigabyte or more. For these reasons this issue was assigned Low severity. The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-8376 | Perl versions through 5.43.10 have a heap buffer overflow when compiling regular expressions with a repeated fixed string on 32-bit builds. Perl_study_chunk in regcomp_study.c checked the size of the joined substring buffer in characters rather than bytes. For a quantified fixed substring with a large minimum count, the byte length mincount * l could overflow SSize_t, producing an undersized SvGROW allocation; the subsequent copy writes past the end of the buffer. A caller that compiles an attacker-controlled regular expression on a 32-bit perl build triggers a heap buffer overflow at compile time. |
| CVE-2026-9076 | Issue summary: When CMS password-based decryption (RFC 3211 / PWRI key unwrap) processes attacker-supplied CMS data, an attacker-chosen stream-mode KEK cipher can trigger a heap out-of-bounds read in kek_unwrap_key(). Impact summary: A heap buffer over-read may trigger a crash which leads to Denial of Service for an application if the input buffer ends at a memory page boundary and the following page is unmapped. There is no information disclosure as the over-read bytes are not revealed to the attacker. The key unwrapping function performs a check-byte test as specified in the RFC that reads 7 bytes from a heap allocation that is based on the wrapped key length from the message. There is a minimum length check based on the block length of the wrapping cipher. However the cipher is selected from an OID carried in the attacker's PWRI keyEncryptionAlgorithm with no requirement that the cipher be a block cipher. When an attacker selects a stream-mode cipher the guard will be ineffective and the allocated buffer containing the unwrapped key can be too small to fit the check-bytes specified in the RFC and a buffer over-read can happen. Applications calling CMS_decrypt() or CMS_decrypt_set1_password() (equivalently openssl cms -decrypt -pwri_password ...) on untrusted CMS data are vulnerable to this issue. No password knowledge is required: the over-read happens during the unwrap attempt before any authentication succeeds. The over-read is limited to a few bytes and is not written to output, so there is no information disclosure. Triggering a crash requires the allocation to border unmapped memory, which is unlikely with the normal allocator. The FIPS modules are not affected by this issue. |
| CVE-2026-11940 | tarfile.extractall() with the 'data' or 'tar' filter could be bypassed by a crafted archive where a hardlink references a symlink stored at a deeper name than the hardlink itself. The extraction fallback validated the symlink at it's archived location but recreated it at the hardlink's shallower path, letting a relative target the filter judged contained escape the destination directory. This allowed a malicious tar archive to create a symlink pointing outside the destination, enabling out-of-destination file reads or writes. This was an incomplete fix of CVE-2025-4330. |
| CVE-2026-11972 | When using the "tarfile" module with a file opened in "streaming mode" (mode="r|") the tarfile module did not properly handle EOF, making archive parsing take exponentially longer. |
| CVE-2026-14164 | A double free issue has been identified in libarchive's RAR5 reader. During parsing of a specially crafted RAR5 archive, the filtered_buf pointer may remain stale after being freed during unpacking state reinitialization. Subsequent processing of another archive entry can trigger a second free of the same memory region, resulting in a double-free condition. Successful exploitation may cause applications using the vulnerable libarchive API to terminate unexpectedly, leading to a denial of service. |
| CVE-2026-22795 | Issue summary: An invalid or NULL pointer dereference can happen in an application processing a malformed PKCS#12 file. Impact summary: An application processing a malformed PKCS#12 file can be caused to dereference an invalid or NULL pointer on memory read, resulting in a Denial of Service. A type confusion vulnerability exists in PKCS#12 parsing code where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid pointer read. The location is constrained to a 1-byte address space, meaning any attempted pointer manipulation can only target addresses between 0x00 and 0xFF. This range corresponds to the zero page, which is unmapped on most modern operating systems and will reliably result in a crash, leading only to a Denial of Service. Exploiting this issue also requires a user or application to process a maliciously crafted PKCS#12 file. It is uncommon to accept untrusted PKCS#12 files in applications as they are usually used to store private keys which are trusted by definition. For these reasons, the issue was assessed as Low severity. The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS12 implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue. OpenSSL 1.0.2 is not affected by this issue. |
| CVE-2026-22796 | Issue summary: A type confusion vulnerability exists in the signature verification of signed PKCS#7 data where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing malformed PKCS#7 data. Impact summary: An application performing signature verification of PKCS#7 data or calling directly the PKCS7_digest_from_attributes() function can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service. The function PKCS7_digest_from_attributes() accesses the message digest attribute value without validating its type. When the type is not V_ASN1_OCTET_STRING, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash. Exploiting this vulnerability requires an attacker to provide a malformed signed PKCS#7 to an application that verifies it. The impact of the exploit is just a Denial of Service, the PKCS7 API is legacy and applications should be using the CMS API instead. For these reasons the issue was assessed as Low severity. The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| CVE-2026-22815 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, insufficient restrictions in header/trailer handling could cause uncapped memory usage. This issue has been patched in version 3.13.4. |
| CVE-2026-23868 | Giflib contains a double-free vulnerability that is the result of a shallow copy in GifMakeSavedImage and incorrect error handling. The conditions needed to trigger this vulnerability are difficult but may be possible. |
| CVE-2026-25528 | LangSmith Client SDKs provide SDK's for interacting with the LangSmith platform. The LangSmith SDK's distributed tracing feature is vulnerable to Server-Side Request Forgery via malicious HTTP headers. An attacker can inject arbitrary api_url values through the baggage header, causing the SDK to exfiltrate sensitive trace data to attacker-controlled endpoints. When using distributed tracing, the SDK parses incoming HTTP headers via RunTree.from_headers() in Python or RunTree.fromHeaders() in Typescript. The baggage header can contain replica configurations including api_url and api_key fields. Prior to the fix, these attacker-controlled values were accepted without validation. When a traced operation completes, the SDK's post() and patch() methods send run data to all configured replica URLs, including any injected by an attacker. This vulnerability is fixed in version 0.6.3 of the Python SDK and 0.4.6 of the JavaScript SDK. |
| CVE-2026-26740 | Buffer Overflow vulnerability in giflib v.5.2.2 allows a remote attacker to cause a denial of service via the EGifGCBToExtension overwriting an existing Graphic Control Extension block without validating its allocated size. |
| CVE-2026-28386 | Issue summary: Applications using AES-CFB128 encryption or decryption on systems with AVX-512 and VAES support can trigger an out-of-bounds read of up to 15 bytes when processing partial cipher blocks. Impact summary: This out-of-bounds read may trigger a crash which leads to Denial of Service for an application if the input buffer ends at a memory page boundary and the following page is unmapped. There is no information disclosure as the over-read bytes are not written to output. The vulnerable code path is only reached when processing partial blocks (when a previous call left an incomplete block and the current call provides fewer bytes than needed to complete it). Additionally, the input buffer must be positioned at a page boundary with the following page unmapped. CFB mode is not used in TLS/DTLS protocols, which use CBC, GCM, CCM, or ChaCha20-Poly1305 instead. For these reasons the issue was assessed as Low severity according to our Security Policy. Only x86-64 systems with AVX-512 and VAES instruction support are affected. Other architectures and systems without VAES support use different code paths that are not affected. OpenSSL FIPS module in 3.6 version is affected by this issue. |
| CVE-2026-28387 | Issue summary: An uncommon configuration of clients performing DANE TLSA-based server authentication, when paired with uncommon server DANE TLSA records, may result in a use-after-free and/or double-free on the client side. Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, the issue only affects clients that make use of TLSA records with both the PKIX-TA(0/PKIX-EE(1) certificate usages and the DANE-TA(2) certificate usage. By far the most common deployment of DANE is in SMTP MTAs for which RFC7672 recommends that clients treat as 'unusable' any TLSA records that have the PKIX certificate usages. These SMTP (or other similar) clients are not vulnerable to this issue. Conversely, any clients that support only the PKIX usages, and ignore the DANE-TA(2) usage are also not vulnerable. The client would also need to be communicating with a server that publishes a TLSA RRset with both types of TLSA records. No FIPS modules are affected by this issue, the problem code is outside the FIPS module boundary. |
| CVE-2026-28388 | Issue summary: When a delta CRL that contains a Delta CRL Indicator extension is processed a NULL pointer dereference might happen if the required CRL Number extension is missing. Impact summary: A NULL pointer dereference can trigger a crash which leads to a Denial of Service for an application. When CRL processing and delta CRL processing is enabled during X.509 certificate verification, the delta CRL processing does not check whether the CRL Number extension is NULL before dereferencing it. When a malformed delta CRL file is being processed, this parameter can be NULL, causing a NULL pointer dereference. Exploiting this issue requires the X509_V_FLAG_USE_DELTAS flag to be enabled in the verification context, the certificate being verified to contain a freshestCRL extension or the base CRL to have the EXFLAG_FRESHEST flag set, and an attacker to provide a malformed CRL to an application that processes it. The vulnerability is limited to Denial of Service and cannot be escalated to achieve code execution or memory disclosure. For that reason the issue was assessed as Low severity according to our Security Policy. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-28389 | Issue summary: During processing of a crafted CMS EnvelopedData message with KeyAgreeRecipientInfo a NULL pointer dereference can happen. Impact summary: Applications that process attacker-controlled CMS data may crash before authentication or cryptographic operations occur resulting in Denial of Service. When a CMS EnvelopedData message that uses KeyAgreeRecipientInfo is processed, the optional parameters field of KeyEncryptionAlgorithmIdentifier is examined without checking for its presence. This results in a NULL pointer dereference if the field is missing. Applications and services that call CMS_decrypt() on untrusted input (e.g., S/MIME processing or CMS-based protocols) are vulnerable. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-28390 | Issue summary: During processing of a crafted CMS EnvelopedData message with KeyTransportRecipientInfo a NULL pointer dereference can happen. Impact summary: Applications that process attacker-controlled CMS data may crash before authentication or cryptographic operations occur resulting in Denial of Service. When a CMS EnvelopedData message that uses KeyTransportRecipientInfo with RSA-OAEP encryption is processed, the optional parameters field of RSA-OAEP SourceFunc algorithm identifier is examined without checking for its presence. This results in a NULL pointer dereference if the field is missing. Applications and services that call CMS_decrypt() on untrusted input (e.g., S/MIME processing or CMS-based protocols) are vulnerable. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-29111 | systemd, a system and service manager, (as PID 1) hits an assert and freezes execution when an unprivileged IPC API call is made with spurious data. On version v249 and older the effect is not an assert, but stack overwriting, with the attacker controlled content. From version v250 and newer this is not possible as the safety check causes an assert instead. This IPC call was added in v239, so versions older than that are not affected. Versions 260-rc1, 259.2, 258.5, and 257.11 contain patches. No known workarounds are available. |
| CVE-2026-31789 | Issue summary: Converting an excessively large OCTET STRING value to a hexadecimal string leads to a heap buffer overflow on 32 bit platforms. Impact summary: A heap buffer overflow may lead to a crash or possibly an attacker controlled code execution or other undefined behavior. If an attacker can supply a crafted X.509 certificate with an excessively large OCTET STRING value in extensions such as the Subject Key Identifier (SKID) or Authority Key Identifier (AKID) which are being converted to hex, the size of the buffer needed for the result is calculated as multiplication of the input length by 3. On 32 bit platforms, this multiplication may overflow resulting in the allocation of a smaller buffer and a heap buffer overflow. Applications and services that print or log contents of untrusted X.509 certificates are vulnerable to this issue. As the certificates would have to have sizes of over 1 Gigabyte, printing or logging such certificates is a fairly unlikely operation and only 32 bit platforms are affected, this issue was assigned Low severity. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-31790 | Issue summary: Applications using RSASVE key encapsulation to establish a secret encryption key can send contents of an uninitialized memory buffer to a malicious peer. Impact summary: The uninitialized buffer might contain sensitive data from the previous execution of the application process which leads to sensitive data leakage to an attacker. RSA_public_encrypt() returns the number of bytes written on success and -1 on error. The affected code tests only whether the return value is non-zero. As a result, if RSA encryption fails, encapsulation can still return success to the caller, set the output lengths, and leave the caller to use the contents of the ciphertext buffer as if a valid KEM ciphertext had been produced. If applications use EVP_PKEY_encapsulate() with RSA/RSASVE on an attacker-supplied invalid RSA public key without first validating that key, then this may cause stale or uninitialized contents of the caller-provided ciphertext buffer to be disclosed to the attacker in place of the KEM ciphertext. As a workaround calling EVP_PKEY_public_check() or EVP_PKEY_public_check_quick() before EVP_PKEY_encapsulate() will mitigate the issue. The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.1 and 3.0 are affected by this issue. |
| CVE-2026-33079 | In versions 3.0.0a1 through 3.2.0 of Mistune, there is a ReDoS (Regular Expression Denial of Service) vulnerability in `LINK_TITLE_RE` that allows an attacker who can supply Markdown for parsing to cause denial of service. The regular expression used for parsing link titles contains overlapping alternatives that can trigger catastrophic backtracking. In both the double-quoted and single-quoted branches, a backslash followed by punctuation can be matched either as an escaped punctuation sequence or as two ordinary characters, creating an ambiguous pattern inside a repeated group. If an attacker supplies Markdown containing repeated ! sequences with no closing quote, the regex engine explores an exponential number of backtracking paths. This is reachable through normal Markdown parsing of inline links and block link reference definitions. A small crafted input can therefore cause significant CPU consumption and make applications using Mistune unresponsive. |
| CVE-2026-33845 | A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| CVE-2026-33846 | A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| CVE-2026-34180 | Issue summary: Parsing a crafted DER-encoded ASN.1 structure with a primitive element whose content exceeds 2 gigabytes in length may cause a heap buffer over-read on 64-bit Unix and Unix-like platforms. Impact summary: The heap buffer over-read may crash the application (Denial of Service) or to load into the decoded ASN.1 object contents of memory beyond the end of the input buffer. More typically such ASN.1 elements would instead be truncated. An integer truncation in OpenSSL's ASN.1 decoder causes the content length of an ASN.1 primitive element to be mishandled when it exceeds 2 gigabytes. In the worst case the truncated length is treated as a request to scan the binary content for a terminating zero byte, possibly causing OpenSSL to read either less than or beyond the end of the allocated buffer. Applications that pass attacker-supplied data to d2i_X509(), d2i_PKCS7(), or any other d2i_* decoding function are affected. OpenSSL's own command-line tools are not vulnerable, as data read through the BIO layer is checked before it reaches the affected code. The issue only affects 64-bit Unix and Unix-like platforms; 32-bit platforms and 64-bit Windows are not affected. The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-34181 | Issue Summary: The PKCS#12 file processing fails to perform sufficient input validation for files that use Password-Based Message Authentication Code 1 (PBMAC1) integrity mechanism allowing a certificate and private key forgery. Impact Summary: An attacker impersonating a user can cause a service reading PKCS#12 files to accept forged certificates and private keys with a 1 in 256 probability. If a service accepting PKCS#12 files is using passwords for authenticating the received files, the attacker can create unencrypted PKCS#12 files that use PBMAC1 authentication that specifies an HMAC key of only one byte, allowing them to craft a file that will be accepted with a 1 in 256 probability. That would then cause the service to accept a certificate and private key controlled by the attacker. The FIPS modules are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-34182 | Issue Summary: Cryptographic Message Services (CMS) processing fails to perform sufficient input validation on the cipher and tag length fields of AuthEnvelopedData containers, leading to various potential compromises. Impact Summary: Attackers making use of these vulnerabilities may achieve key-equivalent functionality for a given CMS recipient and/or bypass integrity validation for a given message. In one use case, an attacker may send a CMS message containing AuthEnvelopedData with the cipher specified as a non-AEAD cipher. OpenSSL erroneously allows this selection, and attempts to decrypt and validate the message. An on-path attacker who captures one legitimate AES-GCM AuthEnvelopedData addressed to the victim can re-emit it with the recipientInfos set left byte-for-byte intact, so the victim's private key still unwraps the genuine CEK (the content-encryption key), but with the inner OID rewritten to AES-256-OFB (Output Feedback Mode, an unauthenticated keystream mode) and with an attacker-chosen IV and ciphertext. The victim initializes AES-256-OFB under the real CEK, never consults the MAC field, and CMS_decrypt() returns success. If the application under attack responds to the attacker with any indicator showing success or failure of the decryption effort, it is possible for the attacker to use this as an oracle to obtain key equivalent functionality for the CEK used for the chosen recipient of the message. In another use case, an attacker can reduce the tag length of the chosen AEAD cipher for a given AuthEnvelopedData container to be a single byte long, allowing an attacker to brute force CMS decryption, producing an integrity bypass for applications that trust CMS_decrypt() to reject modified content. The FIPS modules are not affected by this issue. |
| CVE-2026-34183 | Issue summary: Remote peer may exhaust heap memory of the QUIC server or client by flooding it with packets containing PATH_CHALLENGE frames. Impact summary: A malicious remote peer can cause an unbounded memory allocation which can lead to an abnormal termination of the application acting as a QUIC client or server and a Denial of Service. A remote peer may exhaust heap memory by flooding the local QUIC stack with PATH_CHALLENGE frames. The local QUIC stack allocates a PATH_RESPONSE frame for every PATH_CHALLENGE it receives. The allocated PATH_RESPONSE frame gets freed only when the remote peer acknowledges reception of the PATH_RESPONSE frame which will not be done by a malicious peer. The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this issue. The QUIC stack is outside of OpenSSL FIPS module boundary. |
| CVE-2026-34513 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, an unbounded DNS cache could result in excessive memory usage possibly resulting in a DoS situation. This issue has been patched in version 3.13.4. |
| CVE-2026-34514 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, an attacker who controls the content_type parameter in aiohttp could use this to inject extra headers or similar exploits. This issue has been patched in version 3.13.4. |
| CVE-2026-34515 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, on Windows the static resource handler may expose information about a NTLMv2 remote path. This issue has been patched in version 3.13.4. |
| CVE-2026-34516 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, a response with an excessive number of multipart headers may be allowed to use more memory than intended, potentially allowing a DoS vulnerability. This issue has been patched in version 3.13.4. |
| CVE-2026-34517 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, for some multipart form fields, aiohttp read the entire field into memory before checking client_max_size. This issue has been patched in version 3.13.4. |
| CVE-2026-34518 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, when following redirects to a different origin, aiohttp drops the Authorization header, but retains the Cookie and Proxy-Authorization headers. This issue has been patched in version 3.13.4. |
| CVE-2026-34519 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, an attacker who controls the reason parameter when creating a Response may be able to inject extra headers or similar exploits. This issue has been patched in version 3.13.4. |
| CVE-2026-34520 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, the C parser (the default for most installs) accepted null bytes and control characters in response headers. This issue has been patched in version 3.13.4. |
| CVE-2026-34525 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, multiple Host headers were allowed in aiohttp. This issue has been patched in version 3.13.4. |
| CVE-2026-34743 | XZ Utils provide a general-purpose data-compression library plus command-line tools. Prior to version 5.8.3, if lzma_index_decoder() was used to decode an Index that contained no Records, the resulting lzma_index was left in a state where where a subsequent lzma_index_append() would allocate too little memory, and a buffer overflow would occur. This issue has been patched in version 5.8.3. |
| CVE-2026-34993 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.14.0, using ``CookieJar.load()`` with untrusted input may allow arbitrary code execution. Most applications using this function will be doing so with the user's own data, so this is unlikely to affect many applications. Version 3.14.0 patches the issue. If an application does allow attacker controlled files to be loaded, a workaround on older releases would be to sanitize the files before loading. |
| CVE-2026-35188 | Issue summary: A malicious server can exploit TLS OCSP stapling by delivering a crafted response through the status_request extension, triggering a double-free in the client's certificate verification path. Impact summary: Successful exploitation allows an attacker to corrupt heap memory via a double-free, potentially leading to a Denial of Service or possibly an attacker controlled code execution or other undefined behavior. If OCSP stapling is enabled and the TLS client connects to a malicious server, a crafted OCSP stapled response can trigger a double free in the TLS client when the stapled response is checked. The OCSP stapling is not enabled by default. Reliable code execution through a double-free is technically complex and highly environment-dependent but the Denial of Service impact is straightforward to achieve, warranting Moderate severity. No FIPS modules are affected by this issue as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-35397 | Jupyter Server is the backend for Jupyter web applications. In versions 2.17.0 and earlier, a path traversal vulnerability in the REST API allows an authenticated user to escape the configured root_dir and access sibling directories whose names begin with the same prefix as the root_dir. For example, with a root_dir named "test", the API permits access to a sibling directory named "testtest" through a crafted request to the /api/contents endpoint using encoded path components. An attacker can read, write, and delete files in affected sibling directories. Multi-tenant deployments using predictable naming schemes are particularly at risk, as a user with a directory named "user1" could access directories for user10 through user19 and beyond. A user who can choose a single-character folder name could gain access to a significant number of sibling directories. Version 2.18.0 contains a fix. As a workaround, ensure folder names do not share a common prefix with any sibling directory. |
| CVE-2026-40087 | LangChain is a framework for building agents and LLM-powered applications. Prior to 0.3.84 and 1.2.28, LangChain's f-string prompt-template validation was incomplete in two respects. First, some prompt template classes accepted f-string templates and formatted them without enforcing the same attribute-access validation as PromptTemplate. In particular, DictPromptTemplate and ImagePromptTemplate could accept templates containing attribute access or indexing expressions and subsequently evaluate those expressions during formatting. Second, f-string validation based on parsed top-level field names did not reject nested replacement fields inside format specifiers. In this pattern, the nested replacement field appears in the format specifier rather than in the top-level field name. As a result, earlier validation based on parsed field names did not reject the template even though Python formatting would still attempt to resolve the nested expression at runtime. This vulnerability is fixed in 0.3.84 and 1.2.28. |
| CVE-2026-40110 | Jupyter Server is the backend for Jupyter web applications. In versions 2.17.0 and earlier, the Origin header validation uses Python's re.match() to check incoming origins against the allow_origin_pat configuration value. Because re.match() only anchors at the start of the string and does not require a full match, a pattern intended to match only a trusted domain (e.g., trusted.example.com) will also match any origin that begins with that domain followed by additional characters (e.g., trusted.example.com.evil.com). An attacker who controls such a domain can bypass the CORS origin restriction and make cross-origin requests to the Jupyter Server API from an untrusted site. This issue has been fixed in version 2.18.0. |
| CVE-2026-40171 | In Jupyter Notebook versions 7.0.0 through 7.5.5, JupyterLab versions 4.5.6 and earlier, and the corresponding @jupyter-notebook/help-extension and @jupyterlab/help-extension packages before 7.5.6 and 4.5.7, a stored cross-site scripting issue in the help command linker can be chained with attacker-controlled notebook content to steal authentication tokens with a single click. An attacker can craft a malicious notebook file containing elements that appear indistinguishable from legitimate controls and trigger execution when a user interacts with them. Successful exploitation allows theft of the user's authentication token and complete takeover of the Jupyter session through the REST API, including reading files, creating or modifying files, accessing kernels to execute arbitrary code, and creating terminals for shell access. This issue has been fixed in Notebook 7.5.6, JupyterLab 4.5.7, @jupyter-notebook/help-extension 7.5.6, and @jupyterlab/help-extension 4.5.7. As a workaround, disable the affected help extensions or set allowCommandLinker to false in the sanitizer configuration. |
| CVE-2026-40192 | Pillow is a Python imaging library. Versions 10.3.0 through 12.1.1 did not limit the amount of GZIP-compressed data read when decoding a FITS image, making them vulnerable to decompression bomb attacks. A specially crafted FITS file could cause unbounded memory consumption, leading to denial of service (OOM crash or severe performance degradation). If users are unable to immediately upgrade, they should only open specific image formats, excluding FITS, as a workaround. |
| CVE-2026-40225 | In udev in systemd before 260, local root execution can occur via malicious hardware devices and unsanitized kernel output. |
| CVE-2026-40226 | In nspawn in systemd 233 through 259 before 260, an escape-to-host action can occur via a crafted optional config file. |
| CVE-2026-40934 | Jupyter Server is the backend for Jupyter web applications. In versions 2.17.0 and earlier, the secret used to sign authentication cookies is persisted to a static file at ~/.local/share/jupyter/runtime/jupyter_cookie_secret and is never rotated when a user changes their password. After a password reset and server restart, any previously issued authentication cookie remains cryptographically valid because the signing key has not changed. An attacker who has captured a session cookie through any means retains full authenticated access to the server regardless of subsequent password changes. This affects deployments using password-based authentication, particularly shared or public-facing servers where credential rotation is expected to revoke existing sessions. This issue has been fixed in version 2.18.0. |
| CVE-2026-41182 | LangSmith Client SDKs provide SDK's for interacting with the LangSmith platform. Prior to version 0.5.19 of the JavaScript SDK and version 0.7.31 of the Python SDK, the LangSmith SDK's output redaction controls (hideOutputs in JS, hide_outputs in Python) do not apply to streaming token events. When an LLM run produces streaming output, each chunk is recorded as a new_token event containing the raw token value. These events bypass the redaction pipeline entirely — prepareRunCreateOrUpdateInputs (JS) and _hide_run_outputs (Python) only process the inputs and outputs fields on a run, never the events array. As a result, applications relying on output redaction to prevent sensitive LLM output from being stored in LangSmith will still leak the full streamed content via run events. Version 0.5.19 of the JavaScript SDK and version 0.7.31 of the Python SDK fix the issue. |
| CVE-2026-41989 | Libgcrypt before 1.12.2 sometimes allows a heap-based buffer overflow and denial of service via crafted ECDH ciphertext to gcry_pk_decrypt. |
| CVE-2026-41991 | GNU gzip contains a vulnerability in the gzexe utility related to insecure temporary file handling. When the mktemp utility is not available in the user’s PATH, gzexe falls back to constructing a temporary file path based solely on the process ID (PID). This predictable filename is created without exclusive access or existence checks. A local attacker can pre‑create the predicted temporary file path as a symbolic link pointing to an arbitrary file writable by the victim. When gzexe runs, it follows the symlink and overwrites the target file, resulting in a time‑of‑check to time‑of‑use (TOCTOU) condition that allows arbitrary file overwrite. This issue has been fixed in the commit 4e6f8b24ab823146ab8776f0b7fe486ab34d4269 |
| CVE-2026-41992 | GNU gzip contains a global buffer overflow vulnerability in the LZH decompression logic caused by improper reuse of shared global state between different decompression formats within a single execution. GNU gzip maintains a global array that is shared across the LZ77, LZW, and LZH decompression routines and is not reinitialized between files processed in the same invocation. By decompressing a specially crafted LZW file followed by a specially crafted LZH file in a single gzip -d command, an attacker can poison the shared global state and subsequently trigger an out‑of‑bounds read in the LZH decoder. The LZH decompression logic follows stale values left in the shared array, causing reads past the end of the allocated global buffer. This issue has been fixed in the commit 63dbf6b3b9e6e781df1a6a64e609b10e23969681 |
| CVE-2026-42009 | A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service. |
| CVE-2026-42010 | A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. |
| CVE-2026-42011 | A flaw was found in gnutls. This vulnerability occurs because permitted name constraints were incorrectly ignored when previous Certificate Authorities (CAs) only had excluded name constraints. A remote attacker could exploit this to bypass critical name constraint checks during certificate validation. This bypass could lead to the acceptance of invalid certificates, potentially enabling spoofing or man-in-the-middle attacks against affected systems. |
| CVE-2026-42012 | A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted certificate that contains Uniform Resource Identifier (URI) or Service (SRV) Subject Alternative Names (SANs). This could cause the certificate validation process to incorrectly fall back to checking DNS hostnames against the Common Name (CN), potentially allowing the attacker to spoof legitimate services or intercept sensitive information. |
| CVE-2026-42013 | A flaw was found in gnutls. When validating certificates, an oversized Subject Alternative Name (SAN) could cause the validation process to incorrectly fall back to checking the Common Name (CN) field. This could allow a remote attacker to bypass proper certificate validation, potentially leading to spoofing or man-in-the-middle attacks. |
| CVE-2026-42014 | A flaw was found in GnuTLS. The `gnutls_pkcs11_token_set_pin` function, used for changing the Security Officer PIN, can lead to a use-after-free vulnerability. This occurs when an attacker attempts to change the PIN with a NULL old PIN for a token that lacks a protected authentication path. |
| CVE-2026-42015 | A flaw was found in gnutls. An off-by-one error exists in the PKCS#12 bag element bounds check. This vulnerability allows an remote attacker to write past the internal array of a PKCS#12 bag when appending to a bag that already contains 32 elements. This memory corruption could lead to a denial of service (DoS) or potentially other unspecified impacts. |
| CVE-2026-42266 | JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From 4.0.0 to 4.5.6, the allow-list of extensions that can be installed from PyPI Extension Manager (allowed_extensions_uris) is not correctly enforced by JupyterLab. The PyPI Extension Manager was not contained to packages listed on the default PyPI index. This vulnerability is fixed in 4.5.7. |
| CVE-2026-42308 | Pillow is a Python imaging library. Prior to version 12.2.0, if a font advances for each glyph by an exceeding large amount, when Pillow keeps track of the current position, it may lead to an integer overflow. This issue has been patched in version 12.2.0. |
| CVE-2026-42309 | Pillow is a Python imaging library. From version 11.2.1 to before version 12.2.0, passing nested lists as coordinates to APIs that accept coordinates such as ImagePath.Path, ImageDraw.ImageDraw.polygon and ImageDraw.ImageDraw.line could cause a heap buffer overflow, as nested lists were recursively unpacked beyond the allocated buffer. Coordinate lists are now validated to contain exactly two numeric coordinates. This issue has been patched in version 12.2.0. |
| CVE-2026-42310 | Pillow is a Python imaging library. From version 4.2.0 to before version 12.2.0, an attacker can supply a malicious PDF that causes the process to hang indefinitely, consuming 100% CPU and making the application unresponsive. This issue has been patched in version 12.2.0. |
| CVE-2026-42311 | Pillow is a Python imaging library. From version 10.3.0 to before version 12.2.0, processing a malicious PSD file could lead to memory corruption, potentially resulting in a crash or arbitrary code execution. This issue has been patched in version 12.2.0. |
| CVE-2026-42496 | Archive::Tar versions before 3.08 for Perl extract symlinks with attacker controlled targets outside the extraction directory. _make_special_file() passes the tar header's linkname to symlink() without validating it against absolute paths or .. segments. The secure-extract mode check that guards regular file extraction does not cover the symlink target. A subsequent open through the extracted name reads or writes the attacker chosen path. |
| CVE-2026-42557 | jupyterlab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. Prior to 4.5.7, JupyterLab's HTML sanitizer allowlists data-commandlinker-command and data-commandlinker-args on button elements, while CommandLinker listens for all click events on document.body and executes the named command without checking whether the element came from trusted JupyterLab UI. A notebook with a pre-saved HTML cell output containing a deceptive button can trigger arbitrary JupyterLab commands - including arbitrary code execution - on a single user click, without any code being submitted for execution by the user. This vulnerability is fixed in 4.5.7. |
| CVE-2026-42764 | Issue summary: Receiving a QUIC initial packet with an invalid token may trigger a NULL pointer dereference in the OpenSSL QUIC server with address validation disabled. Impact summary: NULL pointer dereference typically causes abnormal termination of the affected QUIC server process and a Denial of Service. If the address validation is disabled in the OpenSSL QUIC server implementation, an attacker can crash the server by sending an initial packet with an invalid or expired token. By default, the client address validation is enabled in the OpenSSL QUIC server implementation, which makes the default configuration not vulnerable to this issue. However if the SSL_LISTENER_FLAG_NO_VALIDATE is used with the SSL_new_listener() call, the address validation is disabled making the vulnerable code reachable. The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-42765 | Issue summary: When a partial-chain certificate verification is enabled together with OCSP response checking for the whole chain, a NULL dereference will happen if the verified chain does not have a self-signed trusted anchor, crashing the process. Impact summary: A NULL pointer dereference can trigger a crash which leads to a Denial of Service for an application. When performing OCSP response checking for certificates in the verification chain, the code always tries to access the next certificate as the issuer. There is a check for a self-signed certificate. However with the partial chain verification enabled when the chain does not have a self-signed trusted anchor, the issuer will be NULL for the last certificate in the chain. A NULL pointer dereference then happens. This issue affects only applications which enable both OCSP verification of the certificate chain (X509_V_FLAG_OCSP_RESP_CHECK_ALL) and partial chain verification (X509_V_FLAG_PARTIAL_CHAIN) in the certificate verification. Both flags are disabled by default. For that reason, we have assigned Low severity to the issue. No FIPS modules are affected by this issue as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-42766 | Issue summary: A specially crafted password-encrypted CMS message can trigger a NULL pointer dereference during CMS decryption. Impact summary: This NULL pointer dereference leads to an application crash and a Denial of Service. The CMS PasswordRecipientInfo.keyDerivationAlgorithm field is defined as OPTIONAL in the ASN.1 specification and may therefore be absent in specially crafted inputs. During the password-based CMS decryption the OpenSSL CMS implementation dereferences this field without first checking whether it was present. An attacker who supplies such a CMS message to an application performing password-based CMS decryption can trigger an application crash, leading to a Denial of Service. Applications that process password-encrypted CMS messages may be affected. The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-42767 | Issue summary: An attacker-controlled CMP (Certificate Management Protocol) server could trigger a NULL pointer dereference in a CMP client application. Impact summary: A NULL pointer dereference causes a crash of the application and a Denial of Service. An attacker controlling a CMP server (or acting as a man-in-the-middle) could craft a CMP response containing a CRMF (Certificate Request Message Format) CertRepMessage with an EncryptedValue structure where the symmAlg field has an algorithm OID but no parameters field. When the OpenSSL CMP client processes this response, the NULL dereference occurs, causing a crash of the CMP client. Applications that process untrusted CMP/CRMF messages may be affected. The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-42768 | Issue summary: The CMS_decrypt and PKCS7_decrypt functions are vulnerable to Bleichenbacher-style attack when an attacker is able to provide the CMS or S/MIME messages and observe the error code and/or decryption output. Impact summary: The Bleichenbacher-style attack allows an attacker to use the victim's vulnerable application as a way to decrypt or sign messages with the victim's private RSA key. The attack is possible in 2 variants. 1. The decryption API (CMS_decrypt(), PKCS7_decrypt()) is used without providing the recipient certificate. In this case OpenSSL iterates over every KeyTransRecipientInfo (KTRI) without stopping at the first success. An attacker who authors a message with two KTRI entries — the first one wrapping a real CEK under the victim's public key, the second with an arbitrary probe ciphertext — obtains opportunity to iterate the 2nd KTRI to get a valid PKCS#1 v1.5 padding if the error code of the application is available. That is a Bleichenbacher oracle (Bleichenbacher, CRYPTO '98): an adaptive-chosen-ciphertext side channel from which the attacker decrypts any RSA ciphertext to the victim's key or forges any PKCS#1 v1.5 signature under it. 2. When the decryption API (CMS_decrypt(), PKCS7_decrypt()) is provided with the recipient certificate, and the recipient is not found, a random key is substituted. An attacker who authors a message and is able to compare both error code and the result of the decryption, can mount a Bleichenbacher oracle. We are not aware of any applications that provide a remote attacker an opportunity to mount an attack described in these scenarios. We consider the existence of such application very unlikely, and for this reason this CVE has been evaluated as Low severity. To avoid these attacks, when RSA PKCS#1 v1.5 Key Transport is in use, the invoked EVP_PKEY_decrypt() will use the implicit rejection mechanism described in draft-irtf-cfrg-rsa-guidance. In previous OpenSSL releases the implicit rejection was explicitly disabled. The implicit rejection mechanism always returns a plaintext value, the symmetric key. This result is deterministic for the ciphertext and the private key. The length of the decryption result can happen to match the length of the key of the symmetric cipher that was used for the content encryption. When a certificate is not provided, the last RecipientInfo producing a key that looks valid will be used. It may cause getting garbage content on decryption. As a proper way to deal with this a recipient certificate has to be provided to identify the particular RecipientInfo for decryption. The FIPS modules in 4.0, 3.6, 3.5, and 3.4 are not affected by this issue, as CMS and S/MIME processing happens outside the OpenSSL FIPS module boundary. |
| CVE-2026-42769 | Issue Summary: An error in the callback used to verify the certificate provided in a Root CA key update Certificate Management Protocol (CMP) message response rendered the certificate validation ineffectual, which could lead to escalation of credentials from the Registration Authority (RA) level to the root Certification Authority (root CA) level. Impact Summary: The Registration Autority could replace the root CA certificate for the CMP clients with an arbitrary root CA certificate. One of the parts of the Certificate Management Protocol (CMP), specified in RFC 9810, is Root Certification Authority (root CA) key Rollover, which is sent by the server in a message with type 'id-it-rootCaKeyUpdate'. As part of these messages, 'newWithOld' certificate, the new root CA certificate signed with the old root CA key, is provided, and verifying its signature is crucial for transferring the trust from the old CA key to the new one. The 'id-it-rootCaKeyUpdate' messages are expected to be processed with OSSL_CMP_get1_rootCaKeyUpdate(), that is expected to verify the 'newWithOld' certificate. A typo in the certificate chain building code led to adding an incorrect certificate ('newWithOld' instead of 'oldRoot') to the certificate chain, rendering the certificate verification process ineffectual (only the issuer name and the algorithm OIDs were verified by other parts of the verification code). An attacker who already has credentials that satisfy the CMP message protection checks can generate a new key pair and use a crafted self-signed certificate in its 'id-it-rootCaKeyUpdate' CMP messages which affected CMP clients would accept as a new trust anchor. Significant preconditions for the attack (having valid RA-level credentials) are the reason the issue was assigned Low severity. The FIPS modules are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-42770 | Issue summary: When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the peer key is not properly checked for the subgroup membership. Impact summary: A malicious peer which presents an X9.42 key carrying the victim's p and g parameters, a forged q = r (a small prime factor of the cofactor (p−1)/q_local), and a public value Y of order r can recover the victim's private key after a small number of key exchange attempts. When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the subgroup membership check Y^q ≡ 1 (mod p) is performed using the peer's own q parameter, not the local key's q. The peer's domain parameters are then matched against the domain parameters of the private key, but the value of q is not compared. A malicious peer who presents an X9.42 key carrying the victim's p, g, a forged q = r (a small prime factor of the cofactor), and a public value Y of order r passes all checks. The shared secret then takes only r distinct values, leaking priv mod r. Repeating for each small-prime factor of the cofactor and combining via CRT recovers the full private key (Lim–Lee / small-subgroup-confinement attack). The realistic attack surface is narrow: principally CMP deployments with long-lived RA/CA DHX keys and bespoke enterprise or government applications using X9.42 DHX static keys with interactive protocols and therefore this issue was assigned Low severity. The FIPS modules in 4.0, 3.6, 3.5, 3.4, 3.1.2 and 3.0 are affected by this issue. |
| CVE-2026-44431 | urllib3 is an HTTP client library for Python. From 1.23 to before 2.7.0, cross-origin redirects followed from the low-level API via ProxyManager.connection_from_url().urlopen(..., assert_same_host=False) still forward these sensitive headers. This vulnerability is fixed in 2.7.0. |
| CVE-2026-44432 | urllib3 is an HTTP client library for Python. From 2.6.0 to before 2.7.0, urllib3 could decompress the whole response instead of the requested portion (1) during the second HTTPResponse.read(amt=N) call when the response was decompressed using the official Brotli library or (2) when HTTPResponse.drain_conn() was called after the response had been read and decompressed partially (compression algorithm did not matter here). These issues could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This could result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data) on the client side. This vulnerability is fixed in 2.7.0. |
| CVE-2026-44708 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.2.1, the mistune math plugin renders inline math ($...$) and block math ($$...$$) by concatenating the raw user-supplied content directly into the HTML output without any HTML escaping. This occurs even when the parser is explicitly created with escape=True, which is supposed to guarantee that all user-controlled text is sanitised before reaching the DOM. This vulnerability is fixed in 3.2.1. |
| CVE-2026-44727 | Jupyter Server is the backend for Jupyter web applications. Prior to 2.20, the nbconvert HTTP handlers in jupyter_server render user-authored notebook HTML under the Jupyter origin without a sandbox directive in their Content-Security-Policy. Combined with nbconvert.HTMLExporter's default non-sanitizing behavior, a notebook carrying an HTML payload in a display_data output triggers stored XSS with cookie access, full /api/* authority, and kernel RCE. This vulnerability is fixed in 2.20. |
| CVE-2026-44843 | LangChain is a framework for building agents and LLM-powered applications. Prior to 0.3.85 and 1.3.3, LangChain contains older runtime code paths that deserialize run inputs, run outputs, or other application-controlled payloads using overly broad object allowlists. These paths may call load() with allowed_objects="all". This does not enable arbitrary Python object deserialization, but it does allow any trusted LangChain-serializable object to be revived, which is broader than these runtime paths require. As a result, attacker-supplied LangChain serialized constructor dictionaries may cause trusted runtime paths to instantiate classes with untrusted constructor arguments. This vulnerability is fixed in 0.3.85 and 1.3.3. |
| CVE-2026-44896 | Mistune is a Python Markdown parser with renderers and plugins. In 3.2.0 and realier, in src/mistune/directives/image.py, the render_figure() function concatenates figclass and figwidth options directly into HTML attributes without escaping. This allows attribute injection and XSS even when HTMLRenderer(escape=True) is used, because these values bypass the inline renderer. |
| CVE-2026-44897 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.2.1, HTMLRenderer.heading() builds the opening <hN> tag by string-concatenating the id attribute value directly into the HTML — with no call to escape(), safe_entity(), or any other sanitisation function. A double-quote character " in the id value terminates the attribute, allowing an attacker to inject arbitrary additional attributes (event handlers, src=, href=, etc.) into the heading element. This vulnerability is fixed in 3.2.1. |
| CVE-2026-44898 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.2.1, render_toc_ul() builds a <ul> table-of-contents tree from a list of (level, id, text) tuples. Both the id value (used as href="#<id>") and the text value (used as the visible link label) are inserted into <a> tags via a plain Python format string — with no HTML escaping applied to either value. When heading IDs are derived from user-supplied heading text (the standard use-case for readable slug anchors), an attacker can craft a heading whose text breaks out of the href="#..." attribute context, injecting arbitrary HTML tags including <script> blocks directly into the rendered TOC. This vulnerability is fixed in 3.2.1. |
| CVE-2026-44899 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.2.1, the Image directive plugin validates the :width: and :height: options with a regex compiled as _num_re = re.compile(r"^\d+(?:\.\d*)?"). When the validated value is not a plain integer, render_block_image() inserts it directly into a style="width:...;" or style="height:...;" attribute. Because the value was accepted by the prefix-only regex, any CSS after the leading digits reaches the style= attribute verbatim and without escaping. This vulnerability is fixed in 3.2.1. |
| CVE-2026-45134 | LangSmith Client SDKs provide SDK's for interacting with the LangSmith platform. Prior to LangSmith SDK Python 0.8.0 and JS/TS 0.6.0, the LangSmith SDK's prompt pull methods (pull_prompt / pull_prompt_commit in Python, pullPrompt / pullPromptCommit in JS/TS) fetch and deserialize prompt manifests from the LangSmith Hub. These manifests may contain serialized LangChain objects and model configuration that affect runtime behavior. When pulling a public prompt by owner/name identifier, the manifest content is controlled by an external party, but prior versions of the SDK did not distinguish this from pulling a prompt within the caller's own organization. This vulnerability is fixed in LangSmith SDK Python 0.8.0 and JS/TS 0.6.0. |
| CVE-2026-45445 | Issue summary: When an application drives an AES-OCB context through the public EVP_Cipher() one-shot interface, the application-supplied initialisation vector (IV) is silently discarded. Impact summary: Every message encrypted under the same key uses the same effective nonce regardless of the IV supplied by the caller, resulting in (key, nonce) reuse and loss of confidentiality. If the same code path is used to compute the authentication tag, the tag depends only on the (key, IV) pair and not on the plaintext or ciphertext, allowing universal forgery of arbitrary ciphertext from a single captured message. OpenSSL provides two ways to drive a cipher: the documented streaming interface (EVP_CipherUpdate / EVP_CipherFinal_ex) and a lower-level one-shot, EVP_Cipher(), whose documentation explicitly recommends against use by applications in favour of EVP_CipherUpdate() and EVP_CipherFinal_ex(). The OCB provider's streaming handler flushes the application-supplied IV into the OCB context before processing data; the one-shot handler did not. Every call to EVP_Cipher() on an AES-OCB context therefore ran with the all-zero key-derived offset state left by cipher initialisation, regardless of the caller's IV. If EVP_EncryptFinal_ex() is subsequently used to obtain the authentication tag, the deferred IV setup runs at that point and clears the running checksum that should have been accumulated over the plaintext. The resulting tag is a function of (key, IV) only and verifies against any ciphertext produced under the same (key, IV) pair. The OpenSSL SSL/TLS implementation is not affected: AES-OCB is not a TLS cipher suite, and libssl does not call EVP_Cipher() in any case. Applications that drive AES-OCB through the documented streaming AEAD API (EVP_CipherUpdate / EVP_CipherFinal_ex) are not affected. Only applications that combine the AES-OCB cipher with the EVP_Cipher() one-shot API are vulnerable. The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by this issue, as AES-OCB is outside the OpenSSL FIPS module boundary. |
| CVE-2026-45446 | Issue summary: The implementations of AES-SIV (RFC 5297) and AES-GCM-SIV (RFC 8452) mishandle the authentication of AAD (Additional Authenticated Data) with an empty ciphertext allowing a forgery of such messages. Impact summary: An attacker can forge empty messages with arbitrary AAD to the victim's application using these ciphers. AES-SIV (RFC 5297) and AES-GCM-SIV (RFC 8452) are nonce-misuse-resistant AEAD modes: they accept a key, nonce, optional AAD (bytes that are authenticated but not encrypted), and plaintext, and produces ciphertext plus a 16-byte tag. On decrypt, `EVP_DecryptFinal_ex()` is documented to return success only if the tag is verified succesfully. In OpenSSL's provider implementation of these ciphers, the expected tag is computed only when decryption function is invoked with non-empty data. If the caller supplies AAD and then calls `EVP_DecryptFinal_ex()` without invocation of the ciphertext update, which can happen when the received ciphertext length is zero, the tag is never recalculated and still holds its all-zeros value. When AES-GCM-SIV is used, an attacker who sends arbitrary AAD, empty ciphertext, and all-zeros tag passes authentication under any key they do not know, single-shot. When AES-SIV is used, for mounting the attack it's necessary for the application to reuse the decryption context without resetting the key. AES-SIV is implemented since OpenSSL 3.0. AES-GCM-SIV is implemented since OpenSSL 3.2. No protocols implemented in OpenSSL itself (TLS/CMS/PKCS7/HPKE/QUIC) support either AES-GCM-SIV or AES-SIV. To mount an attack, the applications must implement their own protocol and use the EVP interface. Also they must skip the ciphertext update when a message with an empty ciphertext arrives. The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this issue, as these algorithms are not FIPS approved and the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-45447 | Issue summary: A specially crafted PKCS#7 or S/MIME signed message could trigger a use-after-free during PKCS#7 signature verification. Impact summary: A use-after-free may result in process crashes, heap corruption, or potentially remote code execution. When processing a PKCS#7 or S/MIME signed message, if the SignedData digestAlgorithms field is present as an empty ASN.1 SET, OpenSSL may incorrectly free a caller-owned BIO during PKCS7_verify(). A subsequent use of the BIO by the calling application results in a use-after-free condition. In the common case this occurs when the application later calls BIO_free() on the BIO originally passed to PKCS7_verify(). Depending on allocator behavior and application-specific BIO usage patterns, this may result in a crash or other memory corruption. In some application contexts this may potentially be exploitable for remote code execution. Applications that process PKCS#7 or S/MIME signed messages using OpenSSL PKCS#7 APIs may be affected. Applications using the CMS APIs for this processing are not affected. The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| CVE-2026-47265 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.14.0, cookies set with the `cookies` parameter on requests are sent after following a cross-origin redirect. If a developer uses the `cookies` parameter on a per-request basis then sensitive data might be leaked to an attacker if they manage to control a redirect. Version 3.14.0 patches the issue. If unable to upgrade, using a `Cookie` header in the `headers` parameter is not vulnerable. |
| CVE-2026-49476 | Soup Sieve is a CSS selector library designed to be used with Beautiful Soup 4. Prior to 2.8.4, the CSS selector parser in soupsieve allocates unbounded memory when compiling large comma-separated selector lists, allowing an attacker who can supply a crafted selector string to soupsieve.compile() or Beautiful Soup .select() / .select_one() to allocate hundreds of megabytes of heap memory from a relatively small input and cause denial of service. This issue is fixed in version 2.8.4. |
| CVE-2026-49477 | Soup Sieve is a CSS selector library designed to be used with Beautiful Soup 4. Prior to 2.8.4, the CSS selector parser in soupsieve contains a regular expression vulnerable to catastrophic backtracking when processing an attribute selector with an unterminated quoted value in soupsieve/css_parser.py, allowing an attacker who can supply untrusted CSS selector strings to soupsieve.compile() or Beautiful Soup .select() / .select_one() to cause CPU exhaustion and denial of service. This issue is fixed in version 2.8.4. |
| CVE-2026-49851 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, Mistune is vulnerable to a CPU exhaustion DoS due to superlinear (approximately O(n²)) behavior in parse_link_text. When parsing Markdown containing many consecutive [ characters, parse_link_text repeatedly scans the input using a regex search inside a loop. Each iteration re-scans a large portion of the remaining string, resulting in quadratic-time behavior. An attacker-controlled Markdown input can therefore trigger excessive CPU usage with a very small payload. This vulnerability is fixed in 3.3.0. |
| CVE-2026-49853 | Tornado is a Python web framework and asynchronous networking library. Prior to 6.5.6, SimpleAsyncHTTPClient shallow-copied redirected requests and removed only the Host header, leaving Authorization, auth_username, auth_password, and auth_mode in place when a redirect changed scheme, host, or port. This issue is fixed in version 6.5.6. |
| CVE-2026-49854 | Tornado is a Python web framework and asynchronous networking library. Prior to 6.5.6, the optional native extension tornado.speedups implemented websocket_mask without validating that the mask argument is exactly four bytes, allowing the C function to read up to three bytes beyond the provided buffer when reached through Tornado XSRF token decoding with the native extension active. This issue is fixed in version 6.5.6. |
| CVE-2026-49855 | Tornado is a Python web framework and asynchronous networking library. Prior to 6.5.6, Tornado gzip decompression routines processed limited-size chunks but did not enforce an overall limit on accumulated decompressed chunks, allowing a malicious server accessed by SimpleAsyncHTTPClient or an HTTPServer configured with decompress_request=True to consume effectively unlimited memory. This issue is fixed in version 6.5.6. |
| CVE-2026-50269 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.0, attacker-controlled input included into multipart/payload headers can be used to modify a request to inject additional headers or similar. In the unlikely situation that an application is passing user-controlled strings into MultipartWriter.append(headers=...) or Payload.headers, then an attacker may be able to modify the request to inject headers or change the contents of the request. This vulnerability is fixed in 3.14.0. |
| CVE-2026-53224 | In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded INIT chunk and address list lengths in cookie sctp_unpack_cookie() only checked that the embedded INIT chunk length did not exceed the remaining cookie payload, but did not ensure that the INIT chunk is large enough to contain a complete INIT header. A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose length field is smaller than sizeof(struct sctp_init_chunk). Later, sctp_process_init() accesses INIT parameters unconditionally, which may lead to out-of-bounds reads. In addition, raw_addr_list_len is not fully validated against the remaining cookie payload. When cookie authentication is disabled, an attacker can supply an oversized raw_addr_list_len and cause sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The address parser also lacks sufficient bounds checks for parameter headers and lengths, allowing malformed address parameters to trigger out-of-bounds reads. Fix this by: - requiring the embedded INIT chunk length to be at least sizeof(struct sctp_init_chunk); - validating that the INIT chunk and raw address list together fit within the cookie payload; - verifying sufficient data exists for each address parameter header and payload before parsing it. Note that sctp_verify_init() must be called after sctp_unpack_cookie() and before sctp_process_init() when cookie authentication is disabled. This will be addressed in a separate patch. |
| CVE-2026-53246 | In the Linux kernel, the following vulnerability has been resolved: sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing When a listening SCTP server processes a COOKIE_ECHO chunk, the cached peer INIT chunk embedded after the cookie is parsed and its parameters are later walked by sctp_process_init() using sctp_walk_params(). However, the chunk header length of this cached INIT chunk was not validated against the remaining buffer in the COOKIE_ECHO payload. If the length field is inflated, the parameter walk can run beyond the actual received data, leading to out-of-bounds reads and potential memory corruption during later parameter handling (e.g. STATE_COOKIE processing and kmemdup() copies). Add a bounds check in sctp_unpack_cookie() to ensure the cached INIT chunk length does not exceed the available data in the COOKIE_ECHO buffer before it is used. |
| CVE-2026-53247 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown mtk_free_dev() calls metadata_dst_free() which frees the metadata_dst with kfree() immediately, bypassing the RCU grace period. In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from the skb to the metadata_dst. This function requires RCU read-side protection and the dst must remain valid until all RCU readers complete. Since metadata_dst_free() calls kfree() directly, a use-after-free can occur if any skb still holds a noref pointer to the dst when the driver tears it down. Replace metadata_dst_free() with dst_release() which properly goes through the refcount path: when the refcount drops to zero, it schedules the actual free via call_rcu_hurry(), ensuring all RCU readers have completed before the memory is freed. |
| CVE-2026-54058 | Pillow is a Python imaging library. Prior to 12.3.0, when Pillow loads an uncompressed McIdas AREA image from a filename through the mmap raw codec path, attacker-controlled header words can set a row stride smaller than the natural row width, causing pixel access such as Image.tobytes(), getpixel, convert, or save to read beyond the mapped region and disclose adjacent process memory or fault. This issue is fixed in version 12.3.0. |
| CVE-2026-54059 | Pillow is a Python imaging library. Prior to 12.3.0, PIL/PcfFontFile.py _load_bitmaps() read glyph dimensions from the PCF METRICS section and passed them directly to Image.frombytes() without calling Image._decompression_bomb_check(), allowing crafted PCF font data to cause excessive memory allocation. This issue is fixed in version 12.3.0. |
| CVE-2026-54060 | Pillow is a Python imaging library. Prior to 12.3.0, PIL/FontFile.py FontFile.compile() assembled per-glyph images into a combined bitmap with Image.new("1", (xsize, ysize)) without calling Image._decompression_bomb_check(), allowing a font to trigger excessive allocation during conversion or saving. This issue is fixed in version 12.3.0. |
| CVE-2026-54273 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.1, no limit was present on the number of pipelined requests that could be queued. An attacker may be able to use pipelined requests to use excessive amounts of memory, potentially leading to DoS. This vulnerability is fixed in 3.14.1. |
| CVE-2026-54274 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.1, if an attacker sends large incomplete websocket frame payloads, it may be possible to bypass the usual size limits on memory use. This vulnerability is fixed in 3.14.1. |
| CVE-2026-54275 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.1, the server_hostname TLS SNI check can be bypassed when an existing connection is reused. If an application makes multiple requests to the same domain, but with different per-request server_hostname parameters, then the later calls may succeed by reusing the existing connection when they should have been rejected due to the TLS SNI check. This vulnerability is fixed in 3.14.1. |
| CVE-2026-54276 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.1, DigestAuthMiddleware can send an authentication response after following a cross-origin redirect. This likely requires an open redirect vulnerability or similar on the target domain for an attacker to be able to execute. Further, the attacker is only receiving the digest, so should only be able to extract the user's credentials if the cryptography is weak or there is some kind of password reuse. This vulnerability is fixed in 3.14.1. |
| CVE-2026-54277 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.1, it is possible to bypass the max_line_size check in parts of an HTTP request in the C parser. If using the optimised C parser (the default in pre-built wheels), then an attacker may be able to send oversized lines through the HTTP parser and use an excessive amount of memory, potentially leading to DoS. This vulnerability is fixed in 3.14.1. |
| CVE-2026-54278 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.1, during cleanup it is possible for a compressed request body to be decompressed into memory in one chunk. An attacker may be able to send a compressed payload in specific situations that could be decompressed into memory, potentially leading to DoS (a zip bomb edge case). This vulnerability is fixed in 3.14.1. |
| CVE-2026-54279 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.1, host-only cookies that are saved with CookieJar.save() and then restored later with CookieJar.load() lose their host-only status. This vulnerability is fixed in 3.14.1. |
| CVE-2026-54280 | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.1, payload resources are not closed correctly when a client disconnects in the middle of a write. If a payload is using an open file or similar limited resource, then an attacker may be able to cause resource starvation temporarily until garbage collection or similar closes the file. This vulnerability is fixed in 3.14.1. |
| CVE-2026-54527 | JupyterLab Git is a Git extension for JupyterLab. From 0.30.0b3 before 0.54.0, the PlainTextDiff.ts createHeader() method passes Git filenames directly to innerHTML when rendering renamed files in commit history, allowing a crafted filename to execute JavaScript when a victim views the rename diff in the Git History tab. This issue is fixed in version 0.54.0. |
| CVE-2026-54528 | JupyterLab Git is a Git extension for JupyterLab. Prior to 0.54.0, jupyterlab-git uses fnmatch.fnmatchcase() in GitHandler.prepare() in jupyterlab_git/handlers.py to enforce excluded_paths, allowing an authenticated user on a case-insensitive filesystem to vary URL path casing and read excluded directories. This issue is fixed in version 0.54.0. |
| CVE-2026-55379 | Pillow is a Python imaging library. Prior to 12.3.0, PIL/BdfFontFile.py bdf_char() read the BBX width and height field from a BDF font file and passed attacker-controlled dimensions to Image.new() without calling Image._decompression_bomb_check(), bypassing Pillow's documented decompression bomb protection and allowing excessive memory allocation. This issue is fixed in version 12.3.0. |
| CVE-2026-55380 | Pillow is a Python imaging library. Prior to 12.3.0, PIL/GdImageFile.py GdImageFile._open() read image dimensions from the GD 2.x header and stored them in self._size without calling Image._decompression_bomb_check(), allowing a crafted .gd file to trigger excessive C-heap allocation when loaded. This issue is fixed in version 12.3.0. |
| CVE-2026-55798 | Pillow is a Python imaging library. Prior to 12.3.0, WindowsViewer.get_command() constructed a cmd.exe shell command by directly embedding a file path into an f-string without escaping and passed the result to subprocess.Popen(..., shell=True), allowing shell metacharacters in the file path to inject arbitrary cmd.exe commands. This issue is fixed in version 12.3.0. |
| CVE-2026-59197 | Pillow is a Python imaging library. Prior to 12.3.0, Pillow's public rank-filter API can trigger a native heap out-of-bounds write when given a very large odd filter size because ImageFilter.RankFilter.filter() calls image.expand(size // 2, size // 2) before rank-filter size validation and ImagingExpand() computes output dimensions with unchecked signed int arithmetic. This issue is fixed in version 12.3.0. |
| CVE-2026-59198 | Pillow is a Python imaging library. From 5.2.0 until 12.3.0, Pillow's TGA RLE encoder reads past its packed row buffer when saving a mode 1 image with TGA RLE compression, allowing adjacent process heap bytes to be copied into the generated TGA file. This issue is fixed in version 12.3.0. |
| CVE-2026-59199 | Pillow is a Python imaging library. Prior to 12.3.0, Pillow public image coordinate APIs can trigger a native heap out-of-bounds write when given coordinates near the signed 32-bit integer limits in Image.paste(), Image.crop(), or Image.alpha_composite(). This issue is fixed in version 12.3.0. |
| CVE-2026-59200 | Pillow is a Python imaging library. From 5.1.0 until 12.3.0, PdfParser.PdfStream.decode() in PIL/PdfParser.py calls zlib.decompress() with bufsize set to the PDF stream Length field without bounding the decompressed output size, allowing a crafted FlateDecode PDF stream to exhaust memory from a small file. This issue is fixed in version 12.3.0. |
| CVE-2026-59203 | Pillow is a Python imaging library. From 12.0.0 through 12.2.0, Pillow's EPS parser in PIL/EpsImagePlugin.py accepts a negative byte count in the %%BeginBinary directive, allowing a crafted EPS file to cause Image.open() to seek backwards to the same directive and parse it repeatedly in an infinite loop. This issue is fixed in version 12.3.0. |
| CVE-2026-59204 | Pillow is a Python imaging library. From 8.2.0 through 12.2.0, src/libImaging/Jpeg2KDecode.c accumulates total_component_width across every tile in a JPEG2000 image instead of recomputing it per tile, allowing a crafted tiled JPEG2000 file to force substantially higher transient memory usage and trigger out-of-memory failures during decoding. This issue is fixed in version 12.3.0. |
| CVE-2026-59205 | Pillow is a Python imaging library. Prior to 12.3.0, Pillow's ImageCms.ImageCmsTransform.apply(im, imOut) API can trigger controlled native heap corruption when the caller supplies an output image whose mode does not match the transform's declared output mode. This issue is fixed in version 12.3.0. |
| CVE-2026-59922 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, a run of closed tilde, equals-sign, or caret marker pairs around a character causes quadratic work in src/mistune/plugins/formatting.py when the strikethrough, mark, or insert plugin scans for matching markers from each possible start position, allowing denial of service through CPU exhaustion. This issue is fixed in version 3.3.0. |
| CVE-2026-59923 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, HTMLRenderer.safe_url() does not block percent-encoded javascript URIs, allowing attacker-supplied Markdown links or images to bypass URL protections and execute script in rendered HTML. This issue is fixed in version 3.3.0. |
| CVE-2026-59924 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, Include.parse() joins and normalizes user-supplied include paths without verifying that the result remains within the intended markdown directory, allowing crafted include paths to access files outside that directory when markdown files are processed using md.read(). This issue is fixed in version 3.3.0. |
| CVE-2026-59925 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, long sequences of well-formed double-asterisk or triple-asterisk emphasis pairs around a character cause quadratic work in src/mistune/inline_parser.py because the parser scans forward for matching close markers from every potential opening run, allowing denial of service in default Mistune parsing. This issue is fixed in version 3.3.0. |
| CVE-2026-59926 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.2.1, render_admonition() in src/mistune/directives/admonition.py concatenates the Admonition directive :class: option into the HTML class attribute without escaping, allowing attribute injection and cross-site scripting even when HTMLRenderer escape mode is enabled. This issue is fixed in version 3.2.1. |
| CVE-2026-59927 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, the Include directive in src/mistune/directives/include.py detects only direct self-includes and not indirect cycles, allowing two markdown files that include each other to trigger unbounded recursion, raise RecursionError, and crash the rendering request. This issue is fixed in version 3.3.0. |
| CVE-2026-59928 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, a Markdown document containing many repeated or distinct reference-link definitions causes quadratic work in src/mistune/block_parser.py and the ref_links environment dictionary handling, allowing denial of service through CPU exhaustion. This issue is fixed in version 3.3.0. |
| CVE-2026-59929 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, the safe_url filter in src/mistune/renderers/html.py blocks only javascript:, vbscript:, file:, and data: schemes, allowing legacy or chained schemes such as feed:, view-source:, jar:, livescript:, mocha:, ms-its:, mk:, and res: to reach rendered href and src attributes and potentially execute script in affected user agents. This issue is fixed in version 3.3.0. |
| CVE-2026-59930 | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, the toc plugin and TableOfContents directive generate heading IDs as predictable toc_N values without slugifying the heading text, allowing attacker-controlled id="toc_N" content to collide with generated anchors and redirect same-page navigation, CSS selectors, or JavaScript handlers. This issue is fixed in version 3.3.0. |
| GHSA-537c-gmf6-5ccf | pyca/cryptography's wheels include a statically linked copy of OpenSSL. The versions of OpenSSL included in wheels prior to cryptograph 48.01 are vulnerable to a security issue. More details about the vulnerability itself can be found in https://openssl-library.org/news/secadv/20260609.txt. If you are building cryptography source ("sdist") then you are responsible for upgrading your copy of OpenSSL. Only users installing from wheels built by the cryptography project (i.e., those distributed on PyPI) need to update their cryptography versions. |
| GHSA-6v7p-g79w-8964 | ### Impact If the Unpacker is used repeatedly after an error occurs, the process may crash with a SEGV. If the Unpacker is used repeatedly to unpack untrusted input from external sources, it may be vulnerable to a DoS attack. |
| GHSA-f4xh-w4cj-qxq8 | # Summary An attacker who can send an HTTP request to a server running the LangSmith SDK's `TracingMiddleware` can cause that server to read an arbitrary file from its local filesystem and upload the contents to LangSmith as a trace attachment. Depending on how the distributed trace system is deployed, triggering a read may not require authentication. Retrieving the contents requires read access to the LangSmith workspace the traces are sent to. The net effect is a trust-boundary crossing: a party with workspace trace-read access (for example a low-privilege workspace member, a contractor, or a compromised teammate account) gains the ability to read files from any server running `TracingMiddleware`, a capability outside that workspace's intended trust boundary. # Impact |
| GHSA-pw6j-qg29-8w7f | # CurlAsyncHTTPClient leaks per-request credentials on handle reuse ## Summary `CurlAsyncHTTPClient` pools and reuses `pycurl` handles across requests but does not reset them between requests, and several per-request options are applied with |
| GHSA-vmhf-c436-hxj4 | A malicious PyPI package can place a `javascript:` URL in its `[project.urls]` metadata. JupyterLab's Extension Manager renders this as the extension's home-page link without validating the protocol, so a user who clicks the extension name executes attacker-controlled JavaScript in the JupyterLab origin. ### Details One of the PyPI package's URL (jupyterlab/extensions/pypi.py) is copied straight into the `homepage_url` rendered by the frontend in packages/extensionmanager/src/widget.tsx#L77-L88. |
