Data Services
Also available as:
PDF
loading table of contents...

Transactions

Support for transactions in Hive 0.13 and later enables SQL atomicity of operations at the row level rather than at the level of a table or partition. This allows a Hive client to read from a partition at the same time that another Hive client is adding rows to the same partition. In addition, transactions provide a mechanism for streaming clients to rapidly update Hive tables and partitions. Hive transactions differ from RDBMS transactions in that each transaction has an identifier, and multiple transactions are grouped into a single transaction batch. A streaming client requests a set of transaction IDs after connecting to Hive and subsequently uses these transaction IDs one at a time during the initialization of new transaction batches. Clients write one or more records for each transaction and either commit or abort a transaction before moving to the next transaction.

[Important]Important

When Hive is configured to use an Oracle database and transactions are enabled in Hive, queries might fail with the error org.apache.hadoop.hive.ql.lockmgr.LockException: No record of lock could be found, may have timed out. This can be caused by a bug in the BoneCP connection pooling library. In this case, Hortonworks recommends that you set the datanucleus.connectionPoolingType property to dbcp so the DBCP library is used.

ACID is an acronym for four required traits of database transactions: atomicity, consistency, isolation, and durability.

Transaction AttributeDescription

Atomicity

An operation either succeeds completely or fails; it does not leave partial data.

Consistency

Once an application performs an operation, the results of that operation are visible to the application in every subsequent operation.

Isolation

Operations by one user do not cause unexpected side effects for other users.

Durability

Once an operation is complete, it is preserved in case of machine or system failure.

By default, transactions are disabled in Hive. To use ACID-based transactions, administrators must use a transaction manager that supports ACID and the ORC file format. See Configuring the Hive Transaction Manager later in this section for instructions on configuring a transaction manager for Hive.

[Note]Note

See the Hive wiki for more information about Hive's support of ACID semantics for transactions.

Understanding Compactions

Hive stores data in base files that cannot be updated by HDFS. Instead, Hive creates a set of delta files for each transaction that alters a table or partition and stores them in a separate delta directory. Occasionally, Hive compacts, or merges, the base and delta files. Hive performs all compactions in the background without affecting concurrent reads and writes of Hive clients. There are two types of compactions:

Table 2.3. Hive Compaction Types

Compaction TypeDescription

Minor

Rewrites a set of delta files to a single delta file for a bucket.

Major

Rewrites one or more delta files and the base file as a new base file for a bucket.


By default, Hive automatically compacts delta and base files at regular intervals. However, Hadoop administrators can configure automatic compactions, as well as perform manual compactions of base and delta files using the following configuration parameters in hive-site.xml.

Table 2.4. Hive Transaction Configuration Parameters

Configuration ParameterDescription

hive.txn.manager

Specifies the class name of the transaction manager used by Hive. Set this property to org.apache.hadoop.hive.ql.lockmgr. DbTxnManager to enable transactions. The default value is org.apache.hadoop.hive.ql.lockmgr. DummyTxnManager, which disables transactions.

hive.compactor.initiator.on

Specifies whether to run the initiator and cleaner threads on this Metastore instance. The default value is false. Must be set to true for exactly one instance of the Hive metastore service.

hive.compactor.worker.threads

Specifies the number of of worker threads to run on this Metastore instance. The default value is 0, which must be set to greater than 0 to enable compactions. Worker threads initialize MapReduce jobs to do compactions. Increasing the number of worker threads decreases the time required to compact tables after they cross a threshold that triggers compactions. However, increasing the number of worker threads also increases the background load on a Hadoop cluster.

hive.compactor.worker.timeout

Specifies the time period, in seconds, after which a compaction job is failed and re-queued. The default value is 86400 seconds, or 24 hours.

hive.compactor.check.interval

Specifies the time period, in seconds, between checks to see if any partitions require compacting. The default value is 300 seconds. Decreasing this value reduces the time required to start a compaction for a table or partition. However, it also increases the background load on the NameNode since each check requires several calls to the NameNode.

hive.compactor.delta.num.threshold

Specifies the number of delta directories in a partition that triggers an automatic minor compaction. The default value is 10.

hive.compactor.delta.pct.threshold

Specifies the percentage size of delta files relative to the corresponding base files that triggers an automatic major compaction. The default value is.1, which is 10 percent.

hive.compactor.abortedtxn.threshold

Specifies the number of aborted transactions on a single partition that trigger an automatic major compaction.


Configuring the Hive Transaction Manager

Configure the following Hive properties to enable transactions:

  • hive.txn.manager

  • hive.compactor.initiator.on

  • hive.compactor.worker.threads

[Tip]Tip

To disable automatic compactions for individual tables, set the NO_AUTO_COMPACTION table property for those tables. This overrides the configuration settings in hive-site.xml. However, this property does not prevent manual compactions.

If you experience problems while enabling Hive transactions, check the Hive log file at /tmp/hive/hive.log.

Performing Manual Compactions

Hive administrators use the ALTER TABLE DDL command to queue requests that compact base and delta files for a table or partition:

ALTER TABLE tablename [PARTITION (partition_key='partition_value' [,...])] COMPACT 'compaction_type'

Use the SHOW COMPACTIONS command to monitor the progress of the compactions:

SHOW COMPACTIONS 
[Note]Note

ALTER TABLE will compact tables even if the NO_AUTO_COMPACTION table property is set.

The SHOW COMPACTIONS command provides the following output for each compaction:

  • Database name

  • Table name

  • Partition name

  • Major or minor compaction

  • Compaction state:

    • Initiated - waiting in queue

    • Working - currently compacting

    • Ready for cleaning - compaction completed and old files scheduled for removal

  • Thread ID

  • Start time of compaction

Hive administrators can also view a list of currently open and aborted transactions with the the SHOW TRANSACTIONS command. This command provides the following output for each transaction:

  • Transaction ID

  • Transaction state

  • Hive user who initiated the transaction

  • Host machine where transaction was initiated

Lock Manager

DbLockManager, introduced in Hive 0.13, stores all transaction and related lock information in the Hive Metastore. Heartbeats are sent regularly from lock holders and transaction initiators to the Hive metastore to prevent stale locks and transactions. The lock or transaction is aborted if the metastore does not receive a heartbeat within the amount of time specified by the hive.txn.timeout configuration property. Hive administrators use the SHOW LOCKS DDL command to view information about locks associated with transactions.

This command provides the following output for each lock:

  • Database name

  • Table name

  • Partition, if the table is partitioned

  • Lock state:

    • Acquired - transaction initiator hold the lock

    • Waiting - transaction initiator is waiting for the lock

    • Aborted - the lock has timed out but has not yet been cleaned

  • Lock type:

    • Exclusive - the lock may not be shared

    • Shared_read - the lock may be shared with any number of other shared_read locks

    • Shared_write - the lock may be shared by any number of other shared_read locks but not with other shared_write locks

  • Transaction ID associated with the lock, if one exists

  • Last time lock holder sent a heartbeat

  • Time the lock was acquired, if it has been acquired

  • Hive user who requested the lock

  • Host machine on which the Hive user is running a Hive client

[Note]Note

The output of the command reverts to behavior prior to Hive 0.13 if administrators use ZooKeeper or in-memory lock managers.

Transaction Limitations

HDP currently has the following limitations for ACID-based transactions in Hive:

  • The BEGIN, COMMIT, and ROLLBACK SQL statements are not yet supported. All operations are automatically committed as transactions.

  • The user initiating the Hive session must have write permission for the destination partition or table.

  • ZooKeeper and in-memory locks are not compatible with transactions.

  • Only ORC files are supported.

  • Destination tables must be bucketed and not sorted.

  • The only supported isolation level is Snapshot.