This is the documentation for Cloudera Manager 5.0.x. Documentation for other versions is available at Cloudera Documentation.


A parcel is a binary distribution format containing the program files, along with additional metadata used by Cloudera Manager. There are a few notable differences between parcels and packages:
  • Parcels are self-contained and installed in a versioned directory. This means that multiple versions of a given parcel can be installed side-by-side. You can then designate one of these installed versions as the active one. With traditional packages, only one package can be installed at a time so there's no distinction between what's installed and what's active.
  • Parcels can be installed at any location in the filesystem. By default, parcels are installed in /opt/cloudera/parcels.

Advantages of Parcels

As a consequence of their unique properties, parcels offer a number of advantages over packages:
  • CDH is distributed as a single object - In contrast to having a separate package for each part of CDH, when using parcels there is just a single object to install. This is especially useful when managing a cluster that isn't connected to the Internet.
  • Internal consistency - All CDH components are matched so there isn't a danger of different parts coming from different versions of CDH.
  • Installation outside of /usr - In some environments, Hadoop administrators do not have privileges to install system packages. In the past, these administrators had to fall back to CDH tarballs, which deprived them of a lot of infrastructure that packages provide. With parcels, administrators can install to /opt or anywhere else without having to step through all the additional manual steps of regular tarballs.
      Note: With parcel software distribution, the path to the CDH libraries is /opt/cloudera/parcels/CDH/lib instead of the usual /usr/lib.
  • Installation of CDH without sudo - Parcel installation is handled by the Cloudera Manager Agent running as root so it's possible to install CDH without needing sudo.
  • Decouples distribution from activation - Due to side-by-side install capabilities, it is possible to stage a new version of CDH across the cluster in advance of switching over to it. This allows the longest running part of an upgrade to be done ahead of time without affecting cluster operations, consequently reducing the downtime associated with upgrade.
  • Rolling upgrades - These are only possible with parcels, due to their side-by-side nature. Traditional packages require shutting down the old process, upgrading the package, and then starting the new process. This can be hard to recover from in the event of errors and requires extensive integration with the package management system to function seamlessly. With the new version staged side-by-side, switching to a new minor version is simply a matter of changing which version of CDH is used when restarting each process. It then becomes practical to do upgrades with rolling restarts, where service roles are restarted in the right order to switch over to the new version with minimal service interruption. Note that major version upgrades (for example, CDH 4 to CDH 5) require full service restarts due to the substantial changes between the versions.

Among other benefits, parcels provide a mechanism for upgrading the packages installed on a cluster from within Cloudera Manager with minimal disruption. Your cluster can continue to run on the existing installed components while you stage a new version across your cluster, without impacting your current operations. You can then cut over to the new version using a rolling restart that will help avoid disruptive downtime of your operations.

You can upgrade individual parcels, or multiple parcels at the same time.

Continue reading:

Parcel Life Cycle

To enable upgrades and additions with minimal disruption, parcels participate in six phases: download, distribute, activate: deactivate, remove, and delete.

  • Downloading a parcel copies the appropriate software to a local parcel repository on the Cloudera Manager Server, where it is available for distribution to the other hosts in any of your clusters managed by this Cloudera Manager Server. You can have multiple parcels for a given product downloaded to your Cloudera Manager Server. Once a parcel has been downloaded to the Server, it will be available for distribution on all clusters managed by the Server. A downloaded parcel will appear in the cluster-specific section for every cluster managed by this Cloudera Manager Server.
  • Distributing a parcel copies the parcel to the member hosts of a cluster and unpacks it. Distributing a parcel does not actually upgrade the components running on your cluster; the current services continue to run unchanged. You can have multiple parcels distributed on your cluster.
      Note: The Distribute process does not require Internet access; rather the Cloudera Manager Agent on each cluster member downloads the parcels from the local parcel repository on the Cloudera Manager Server.
  • Activating a parcel causes the Cloudera Manager to link to the new components, ready to run the new version upon the next restart. Activation does not automatically stop the current services or perform a restart — you have the option to restart the service(s) after activation, or you can allow the system administrator to determine the appropriate time to perform those operations.
  • Deactivating a parcel causes Cloudera Manager to unlink from the parcel components. A parcel cannot be deactivated while it is still in use on one or more hosts.
  • Removing a parcel causes Cloudera Manager to remove the parcel components from the hosts.
  • Deleting a parcel causes Cloudera Manager to remove the parcel components from the local parcel repository.

For example, the following screenshot:

  • One activated CDH parcel
  • One SOLR parcel distributed and ready to activate
  • One Impala parcel being downloaded
  • One CDH parcel being distributed

Cloudera Manager detects when new parcels are available. The parcel indicator in the Admin Console navigation bar ( ) indicates how many parcels are eligible for downloading or distribution. For example, CDH parcels older than the active one do not contribute to the count if you are already using the latest version. If no parcels are eligible, or if all parcels have been activated, then the indicator will not have a blue number badge. You can configure Cloudera Manager to download and distribute parcels automatically, if desired.

  Important: If you plan to upgrade CDH you should follow the instructions in Upgrading CDH and Managed Services. There are additional steps that must be performed in order to successfully upgrade.

Parcel Locations

The default location for the local parcel repository on the Cloudera Manager Server host is /opt/cloudera/parcel-repo. To change this location, follow the instructions in Configuring Server Parcel Settings.

The default location for the distributed parcels on the managed hosts is /opt/cloudera/parcels. To change this location, set the parcel_dir property in /etc/cloudera-scm-agent/config.ini file of the Cloudera Manager Agent and restart the Cloudera Manager Agent or by following the instructions in Configuring the Host Parcel Directory.
  Note: With parcel software distribution, the path to the CDH libraries is /opt/cloudera/parcels/CDH/lib instead of the usual /usr/lib.

Managing Parcels

Through the Parcels interface in Cloudera Manager, you can determine what software versions are running across your clusters. You access the Parcels page by doing one of the following:
  • Clicking the parcel indicator in the Admin Console navigation bar ( )
  • Clicking the Hosts in the top navigation bar, then the Parcels tab.

The Parcels page is divided into several sections. The top section, labeled Downloadable, shows you all the parcels that are available for download from the configured parcel repositories.

Below the Downloadable section, each cluster managed by this Cloudera Manager Server has a section that shows the parcels that have been downloaded, distributed, or activated on that cluster.

When you download a parcel, it appears under every cluster, if you are managing more than one. However, this just indicates that the parcel is available for distribution on those clusters — in fact there is only one copy of the downloaded parcel, residing on the Cloudera Manager Server. Only after you distribute the parcel to a cluster will copies of it be placed on the hosts in that cluster.

Downloading a Parcel

  1. Click the parcel indicator in the top navigation bar. This takes you to the Hosts page, Parcels tab. By default, any parcels available for download are shown in the Available Remotely section of the Parcels page. Parcels available for download will display a Download button.

    If the parcel you want is not shown here — for example, you want to upgrade to version of CDH that is not the most current version — you can make additional remote parcel repositories available through the Administration Settings page. You can also configure the location of the local parcel repository and other settings. See Parcel Configuration Settings.

  2. Click Download to initiate the download of the parcel from the remote parcel repository to your local repository.

When the parcel has been downloaded, the button label changes to Distribute.

  Note: The parcel download is done at the Cloudera Manager Server, so with multiple clusters, the downloaded parcels are shown as available to all clusters managed by the Cloudera Manager Server. However, distribution (to a specific cluster's member hosts) must be selected on a cluster-by-cluster basis.

Distributing a Parcel

Parcels that have been downloaded can be distributed to the hosts in your cluster, available for activation.

From the Parcels tab, click the Distribute button for the parcel you want to distribute. This starts the distribution process to the hosts in the cluster.

Distribution does not require Internet access; rather the Cloudera Manager Agent on each cluster member downloads the parcel from the local parcel repository hosted on the Cloudera Manager Server.

If you have a large number of hosts to which the parcels should be distributed, you can control how many concurrent uploads Cloudera Manager will perform. You can configure this setting on the Administration page, Properties tab under the Parcels section.

You can delete a parcel that is ready to be distributed; click the triangle at the right end of the Distribute button to access the Delete command. This will delete the downloaded parcel from the local parcel repository.

Distributing parcels to the hosts in the cluster does not affect the current running services.

Activating a Parcel

Parcels that have been distributed to the hosts in a cluster are ready to be activated.

  1. From the Parcels tab, click the Activate button for the parcel you want to activate. This will update Cloudera Manager to point to the new software, ready to be run the next time a service is restarted.
  2. A pop-up warns you that your currently running process will not be affected until you restart, and gives you the option to perform a restart. If you do not want to restart at this time, click Close.

If you elect not to restart services as part of the Activation process, you can instead go to the Clusters tab and restart your services at a later time. Until you restart services, the current software will continue to run. This allows you to restart your services at a time that is convenient based on your maintenance schedules or other considerations.

Activating a new parcel also deactivates the previously active parcel (if any) for the product you've just upgraded. However, until you restart the services, the previously active parcel will have the link Still in use and you will not be able to remove the parcel until it is no longer being used.

  Note: Under some situations, such as doing a major release upgrade (for example, CDH 4 to CDH 5) additional upgrade steps may be necessary. In this case, instead of Activate, the button may instead say Upgrade. This indicates that there may be additional steps involved in the upgrade.

Deactivating a Parcel

You can deactivate an active parcel; this will update Cloudera Manager to point to the previous software version, ready to be run the next time a service is restarted. To deactivate a parcel, click Actions on an activated parcel and select Deactivate.

To use the previous version of the software, go to the Clusters tab and restart your services.

  Note: If you did your original installation from parcels, and there is only one version of your software installed (that is, no packages, and no previous parcels have been activated and started) then when you attempt to restart after deactivating the current version, your roles will be stopped but will not be able to restart.

Removing a Parcel

To remove a parcel, click the down arrow to the right of an Activate button and select Remove from Hosts.

Deleting a Parcel

To delete a parcel, click the down arrow to the right of a Distribute button and select Delete.

Viewing Parcel Usage

The Parcel Usage page shows you which parcels are in current use in your clusters. This is particularly useful in a large deployment where it may be difficult to keep track of what versions are installed across the cluster, especially if some hosts were not available when you performed an installation or upgrade, or were added later. To display the Parcel Usage page:
  1. Do one of the following:
    • Click in the top navigation bar
    • Click Hosts in the top navigation bar and click the Parcels tab.
  2. Click the Parcel Usage button.

This page only shows the usage of parcels, not components that were installed as packages. If you select a cluster running packages (for example, a CDH 4 cluster) the cluster is not displayed, and instead you will see a message indicating the cluster is not running parcels. If you have individual hosts running components installed as packages, they will appear as "empty."

You can view parcel usage by cluster, or by product (CDH, SOLR, IMPALA, SPARK, or ACCUMULO).

You can also view just the hosts running only the active parcels, or just hosts running older parcels (not the currently active parcels) or both.

The "host map" at the right shows each host in the cluster with the status of the parcels on that host. If the host is actually running the processes from the currently activated parcels, the host is indicated in blue. A black square indicates that a parcel has been activated, but that all the running processes are from an earlier version of the software. This can happen, for example, if you have not restarted a service or role after activating a new parcel.

Move the cursor over the icon to see the rack to which the hosts are assigned. Hosts on different racks are displayed in separate rows.

To view the exact versions of the software running on a given host, you can click on the square representing the host. This pops up a display showing the parcel versions installed on that host.

For CDH 4.4, Impala 1.1.1, and Solr 0.9.3 or later, it will list the roles running on the selected host that are part of the listed parcel. Clicking a role takes you to the Cloudera Manager page for that role. It also shows whether the parcel is Active or not.

If a host is running a mix of software versions, the square representing the host is shown by a four-square icon . When you move the cursor over that host, both the active and inactive components are shown. For example, in the image below the older CDH parcel has been deactivated but only the HDFS service has been restarted.

Parcel Configuration Settings

Configuring Server Parcel Settings

  1. Do one of the following to open the parcel settings page:
      1. Click in the top navigation bar
      2. Click the Edit Settings button.
      1. Select Administration > Settings.
      2. Click the Parcels category.
      1. Click the Hosts tab.
      2. Select Configuration > View and Edit.
      3. Click the Parcels category.
      4. Click the Edit Settings button.
  2. Specify a property:
    • Local Parcel Repository Path defines the path on the Cloudera Manager Server host where downloaded parcels are stored.
    • Remote Parcel Repository URLs is a list of repositories that Cloudera Manager should check for parcels. Initially this points to the latest released CDH 4, CDH 5, Impala, and Solr repositories but you can add your own repository locations to the list. You can use this mechanism to add Cloudera repositories that are not listed by default, such as older versions of CDH, or the Sentry parcel for CDH 4.3. You can also use this to add your own repositories. The locations of the Cloudera parcel repositories are, where product is cdh4, cdh5, gplextras5, impala, search, and sentry, and version is a specific product version or latest.
      To add a parcel repository:
      1. In the Remote Parcel Repository URLs list, click to open an additional row.
      2. Enter the path to the repository.
  3. Click Save Changes.
You can also:
  • Set the frequency with which Cloudera Manager will check for new parcels.
  • Configure a proxy to access to the remote repositories.
  • Configure whether downloads and distribution of parcels should occur automatically whenever new ones are detected. If automatic downloading/distribution are not enabled (the default), you must go to the Parcels page to initiate these actions.
  • Control which products can be downloaded if automatic downloading is enabled.
  • Control whether to retain downloaded parcels.
  • Control whether to retain old parcel version and how many parcel versions to retain
You can configure the bandwidth limits and the number of concurrent uploads, to tune the load that parcel distribution puts on your network. The defaults are up to 50 concurrent parcel uploads and 50 MiB/s aggregate bandwidth.
  • The concurrent upload count (Maximum Parcel Uploads) doesn't matter, theoretically, if all hosts have the same speed Ethernet. In general, 50 concurrent uploads is an acceptable setting in most cases. However, in a scenario where the server has more bandwidth (say 10Gbe while the normal hosts are using 1Gbe), then the count is important to maximize bandwidth, and would need to be at least the difference in speeds (10x in this case).
  • The bandwidth limit (Parcel Distribution Rate Limit) should be your Ethernet speed (in MiB/seconds) divided by approximately 16. You can use a higher limit if you have QoS set up to prevent starving other services, or if you are willing accept a higher risk of higher bandwidth load.

Configuring the Host Parcel Directory

To configure the location of distributed parcels:
  1. Click Hosts in the top navigation bar.
  2. Select Configuration > View and Edit.
  3. Configure the value of the Parcel Directory property. The setting of the parcel_dir property in the Cloudera Manager Agent configuration file overrides this setting.
  4. Click Save Changes.

Preventing Distribution of Parcels to Hosts

For individual hosts (or all hosts) you can "blacklist" selected parcels to prevent those parcels from being distributed to or activated on those hosts:
  1. Click Hosts in the top navigation bar.
  2. Select Configuration > View and Edit.
  3. Under the Parcels category, enter the parcels to blacklist in the Blacklisted Products property. Enter the name as it appears on the Parcels page—for example, CDH 4.3.0-1.cdh4.3.0.p0.22.
  4. Click Save Changes.
If a parcel you blacklist has already been distributed to the host, it will be removed from that host. If it is already running on the host, it will continue to run until the next restart, when it will not be restarted.
Page generated September 3, 2015.