Fixed Common Vulnerabilities and Exposures in ML Runtimes version 2026.08.2
Learn about the Common vulnerabilities and Exposures (CVEs) that were fixed in the ML Runtimes version 2026.08.2.
| CVE ID | Description |
|---|---|
| CVE-2026-111943 | Security issue tracked by the Go Project in the crypto/x509 certificate verification package following the compromise of eight eMudhra intermediate CA private keys. Go versions 1.26.10 and 1.27.3 add an explicit denylist to crypto/x509, causing certificate verification to fail when any of the untrusted intermediate keys appear in a certificate chain. |
| CVE-2026-78676 | GitPython versions before 3.1.59 fail to safely reserialize multi-line
git configuration values during write operations, corrupting dormant quoted values
into injected directives such as core.hooksPath. Attackers can
craft configuration files with embedded new lines that become live git directives
after any unrelated GitPython configuration write, enabling arbitrary code execution
via hook invocation. |
| CVE-2026-112900 | Pillow versions 2.6.0 up to 13.0.0 (fixed in 13.0.0) are vulnerable to argument injection when invoking Ghostscript for EPS input. EpsImagePlugin.Ghostscript passes a caller-controlled input filename after -f without converting it to a safe absolute path, allowing filenames beginning with a hyphen to be interpreted as Ghostscript options and potentially leading to arbitrary command execution. |
| CVE-2026-96639 | Pillow versions 11.0.0 up to 13.0.0 (fixed in 13.0.0) contain a vulnerability in multi-frame loaders where ImageFile.load_prepare() reuses stale native ImagingCore storage created for a narrow frame mode when a subsequent frame changes to wider RGB or CMYK data. Crafted PSD, MPO, DCX, or MIC frame transitions can write wider pixels into the narrow allocation, causing native out-of-bounds writes, crashes, memory over-reads, or potential command execution. |
| CVE-2026-111497 | Buffer overflow vulnerability in the Brotli decoder (c/dec/decode.c) in Google Brotli versions 1.0.3 through 1.2.0 allows a remote unauthenticated attacker to corrupt adjacent decoder state memory, disclose sensitive memory contents, cause a denial of service, or potentially execute arbitrary code using a crafted Brotli-compressed stream. Fixed in versions 1.0.10, 1.1.1, and 1.2.1. |
| CVE-2026-64600 | In the Linux kernel, the following vulnerability has been resolved: xfs: resample the data fork mapping after cycling ILOCK xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode, a data fork mapping, and a cow fork mapping. Unfortunately, these two helpers cycle the ILOCK to grab a transaction, which means that the mappings are stale as soon as we reacquire the ILOCK. Currently we refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but we don't refresh the data fork mapping beforehand, which means that the xfs_bmap_trim_cow in that function queries the refcount btree about the wrong physical blocks and returns an inaccurate value in *shared. If *shared is now false, the directio write proceeds with a stale data fork mapping. Fix this by querying the data fork mapping if the sequence counter changes across the ILOCK cycle. |
| CVE-2026-64560 | In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Prevent UAF caused by non-leader exec() race Wongi and Jungwoo decoded and reported a non-leader exec() related race which can result in an UAF: sys_timer_delete() exec() posix_cpu_timer_del() // Observes old leader p = pid_task(pid, pid_type); de_thread() switch_leader(); release_task(old_leader) __exit_signal(old_leader) sighand = lock(old_leader, sighand); posix_cpu_timers*_exit(); sighand = lock_task_sighand(p) unhash_task(old_leader); sh = lock(p, sighand) old_leader->sighand = NULL; unlock(sighand); (p->sighand == NULL) unlock(sh) return NULL; // Returns without action if(!sighand) return 0; free_posix_timer(); This is "harmless" unless the deleted timer was armed and enqueued in p->signal because on exec() a TGID targeted timer is inherited. As sys_timer_delete() freed the underlying posix timer object run_posix_cpu_timers() or any timerqueue related add/delete operations on other timers will access the freed object's timerqueue node, which results in an UAF. There is a similar problem vs. posix_cpu_timer_set(). For regular posix timers it just transiently returns -ESRCH to user space, but for the use case in do_cpu_nanosleep() it's the same UAF just that the k_itimer is allocated on the stack. Also posix_cpu_timer_rearm() fails to rearm the timer, which means it stops to expire. While debating solutions Frederic pointed out another problem: posix_cpu_timer_del(tmr) __exit_signal(p) posix_cpu_timers*_exit(p); unhash_task(p); p->sighand = NULL; sh = lock_task_sighand(p) sighand = p->sighand; if (!sighand) return NULL; lock(sighand); if (!sh) WARN_ON_ONCE(timer_queued(tmr)); On weakly ordered architectures it is not guaranteed that posix_cpu_timer_del() will observe the stores in posix_cpu_timers*_exit() when p->sighand is observed as NULL, which means the WARN() can be a false positive. Solve these issues by: 1) Changing the store in __exit_signal() to smp_store_release(). 2) Adding a smp_acquire__after_ctrl_dep() into the !sighand path of lock_task_sighand(). 3) Creating a helper function for looking up the task and locking sighand which does not return when sighand == NULL. Instead it retries the task lookup and only if that fails it gives up. 4) Using that helper in the three affected functions. #1/#2 ensures that the reader side which observes sighand == NULL also observes all preceeding stores, i.e. the stores in posix_cpu_timers*_exit() and the ones in unhash_task(). #3 ensures that the above described non-leader exec() situation is handled gracefully. When the task lookup returns the old leader, but sighand == NULL then it retries. In the non-leader exec() case the subsequent task lookup will observe the new leader due to #1/#2. In normal exit() scenarios the subsequent lookup fails. When the task lookup fails, the function also checks whether the timer is still enqueued and issues a warning if that's the case. Unfortunately there is nothing which can be done about it, but as the task is already not longer visible the timer should not be accessed anymore. This check also requires memory ordering, which is not provided when the first lookup fails. To achieve that the check is preceeded by a smp_rmb() which pairs with the smp_wmb() in write_seqlock() in __exit_signal(). That ensures that the stores in posix_cpu_timers*_exit() are visible. The history of the non-leader exec() issue goes back to the early days of posix CPU timers, which stored a pointer to the group leader task in the timer. That obviously fails when a non-leader exec() switches the leader. commit e0a70217107e ("posix-cpu-timers: workaround to suppress the problems with mt exec") added a temporary workaround for that in 2010 which surv ---truncated--- |
| CVE-2026-64557 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb() l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after release_sock(parent). Once the parent lock is dropped the newly enqueued child socket sk is reachable via the accept queue, so another task can accept and free it before the callback dereferences sk, resulting in a use-after-free. Rework the ->new_connection() op so the core, rather than the callback, owns the child channel's lifetime. The op now receives a pre-allocated new_chan and returns an errno instead of allocating and returning a channel. l2cap_new_connection() allocates the child channel and links it into the conn list via __l2cap_chan_add() before invoking the callback, so the conn-list reference keeps the channel alive once release_sock(parent) exposes the socket to other tasks. Channel configuration that was duplicated in l2cap_sock_init() and the various new_connection callbacks is consolidated into l2cap_chan_set_defaults(), which now inherits from the parent channel when one is supplied. |
| CVE-2026-64556 | In the Linux kernel, the following vulnerability has been resolved: perf/core: Detach event groups during remove_on_exec perf_event_remove_on_exec() removes events by calling perf_event_exit_event(). For top-level events, this removes the event from the context with DETACH_EXIT only. This can leave inconsistent group state when a removed event is a group leader and the group contains siblings without remove_on_exec. If the group was active, the surviving siblings can remain active and attached to the removed leader's sibling list, but are no longer represented by a valid group leader on the PMU context active lists. A later close of the removed leader uses DETACH_GROUP and can promote the still-active siblings from this stale group state. The next schedule-in can then add an already-linked active_list entry again, corrupting the PMU context active list. With DEBUG_LIST enabled, this is caught as a list_add double-add in merge_sched_in(). Fix this by detaching group relationships when remove_on_exec removes an event. This preserves the existing task-exit and revoke behavior, while ensuring surviving siblings are ungrouped before the removed event leaves the context. |
| CVE-2026-64555 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops() kvm_hyp_handle_mops() resets the single-step state machine as part of rewinding state for a MOPS exception by modifying vcpu_cpsr() and writing the result directly into hardware. In the case of nested virtualization, vcpu_cpsr() is a synthetic value such that the rest of KVM can deal with vEL2 cleanly. That means the value requires translation before being written into hardware, which is unfortunately missing from the MOPS handler. Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state altogether, which will be resynchronized on the next 'full' exit back to KVM. |
| CVE-2026-64554 | In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: fix stale prevhdr pointer in br_ip6_fragment() br_ip6_fragment() gets prevhdr, a pointer into the skb head, from ip6_find_1stfragopt(), then calls skb_checksum_help(). For a cloned skb skb_checksum_help() reallocates the head via pskb_expand_head(), leaving prevhdr dangling. It is later dereferenced in ip6_frag_next(), causing a use-after-free write. Save prevhdr's offset before skb_checksum_help() and recompute it after, like commit ef0efcd3bd3f ("ipv6: Fix dangling pointer when ipv6 fragment"). BUG: KASAN: slab-use-after-free in ip6_frag_next (net/ipv6/ip6_output.c:857) Write of size 1 at addr ffff888013ff5016 by task exploit/141 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip6_frag_next (net/ipv6/ip6_output.c:857) br_ip6_fragment (net/ipv6/netfilter.c:212) nf_ct_bridge_post (net/bridge/netfilter/nf_conntrack_bridge.c:407) nf_hook_slow (net/netfilter/core.c:619) br_forward_finish (net/bridge/br_forward.c:66) __br_forward (net/bridge/br_forward.c:115) maybe_deliver (net/bridge/br_forward.c:191) br_flood (net/bridge/br_forward.c:245) br_handle_frame_finish (net/bridge/br_input.c:229) br_handle_frame (net/bridge/br_input.c:442) ... packet_sendmsg (net/packet/af_packet.c:3114) ... do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt |
| CVE-2026-64553 | In the Linux kernel, the following vulnerability has been resolved: net: psample: fix info leak in PSAMPLE_ATTR_DATA psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B. |
| CVE-2026-64552 | In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix len check in receive_big() receive_big() bounds the device-announced length by (big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose: add_recvbuf_big() sets sg[1] to start at offset sizeof(struct padded_vnet_hdr) into the first page, so the chain actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) + big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the check allows for the common hdr_len == 12 case. A malicious virtio backend can announce a len in that gap. page_to_skb() then walks one frag past the page chain, storing a NULL page->private into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds write past the static frag array and a NULL frag handed up the rx path. Bound len by the size add_recvbuf_big() actually advertised. |
| CVE-2026-64551 | In the Linux kernel, the following vulnerability has been resolved: sctp: validate STALE_COOKIE cause length before reading staleness When an ERROR chunk with a STALE_COOKIE cause is received in the COOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measure of Staleness that follows the cause header: err = (struct sctp_errhdr *)(chunk->skb->data); stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err))); err is the first cause in the chunk, not the STALE_COOKIE cause that caused the dispatch, and nothing guarantees the staleness field is present. sctp_walk_errors() only requires a cause to be as long as the 4-byte header, so for a STALE_COOKIE cause of length 4 the read runs past the cause, and for a minimal ERROR chunk past skb->tail. The value is echoed to the peer in the Cookie Preservative of the reply INIT, leaking uninitialized memory. sctp_sf_cookie_echoed_err() already walks to the STALE_COOKIE cause, so check its length there and pass it to sctp_sf_do_5_2_6_stale(), which reads that cause instead of the first one. A STALE_COOKIE cause too short to hold the staleness field is discarded. The read is reachable by any peer that can drive an association into COOKIE_ECHOED, including an unprivileged process using a raw SCTP socket in a user and network namespace. |
| CVE-2026-64550 | In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: validate MAP frame length before ingress parsing When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes the skb straight to __rmnet_map_ingress_handler(), skipping the length validation that rmnet_map_deaggregate() performs on the aggregated path. The parser then dereferences the MAP header and csum header/trailer based on the on-wire pkt_len without checking skb->len, so a short frame is read out of bounds: BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet Read of size 1 at addr ffff88801118ed00 by task exploit/147 Call Trace: ... rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413) __rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96) rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6089) netif_receive_skb (net/core/dev.c:6460) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2001) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Factor that validation out of rmnet_map_deaggregate() into rmnet_map_validate_packet_len() and run it on the no-aggregation path too. The MAP header is bounds-checked first, since this path can receive a frame shorter than the header. |
| CVE-2026-64549 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup() bpa10x_setup() sends the vendor command 0xfc0e and passes the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length: bt_dev_info(hdev, "%s", (char *)(skb->data + 1)); hci_set_fw_info(hdev, "%s", skb->data + 1); A device that returns a one-byte response (status only) leaves skb->data + 1 past the end of the data, and the %s walk reads adjacent slab memory until it meets a NUL. The same happens when the payload is not NUL-terminated within skb->len. The out-of-bounds bytes end up in the kernel log and the firmware-info debugfs file. Print the revision string with a bounded "%.*s" limited to skb->len - 1 instead. This keeps the string readable for well-behaved devices while never reading past the received data, and does not fail setup, so a device returning a short or unterminated response keeps working. |
| CVE-2026-64548 | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data() When the scatterlist ring is full or nearly full, bpf_msg_push_data() enters a copy fallback path and computes copy + len for the page allocation size. Since len comes from BPF with arg3_type = ARG_ANYTHING and both are u32, a crafted len can wrap the sum to a small value, causing an undersized allocation followed by an out-of-bounds memcpy. BUG: unable to handle page fault for address: ffffed104089a402 Oops: Oops: 0000 [#1] SMP KASAN NOPTI Call Trace: __asan_memcpy (mm/kasan/shadow.c:105) bpf_msg_push_data (net/core/filter.c:2852 net/core/filter.c:2788) bpf_prog_9ed8b5711920a7d7+0x2e/0x36 sk_psock_msg_verdict (net/core/skmsg.c:934) tcp_bpf_sendmsg (net/ipv4/tcp_bpf.c:421 net/ipv4/tcp_bpf.c:584) __sys_sendto (net/socket.c:2206) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add an overflow check before the allocation. |
| CVE-2026-64547 | In the Linux kernel, the following vulnerability has been resolved: net: usb: net1080: validate packet_len before pad-byte access in rx_fixup For an even packet_len, net1080_rx_fixup() reads the pad byte at skb->data[packet_len] before the skb->len != packet_len check further down, and packet_len is only bounded against NC_MAX_PACKET. A malicious NetChip 1080 device can send a short frame advertising a large even packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the skb: BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14 ... net1080_rx_fixup (drivers/net/usb/net1080.c:384) usbnet_bh (drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3708) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) ... Reject the frame when packet_len >= skb->len before reading. |
| CVE-2026-64546 | In the Linux kernel, the following vulnerability has been resolved: drm/edid: fix OOB read in drm_parse_tiled_block() drm_parse_tiled_block() casts the DisplayID block to a struct displayid_tiled_block and reads the full fixed layout up to tile->topology_id[7] without checking block->num_bytes. The DisplayID iterator only validates the declared payload length, so a crafted EDID can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at the end of a DisplayID extension. The read then runs past the end of the exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read. Reject blocks shorter than the spec's 22-byte tiled payload before reading the fixed struct, as drm_parse_vesa_mso_data() already does. BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update Read of size 2 at addr ffff888010077700 by task exploit/147 dump_stack_lvl (lib/dump_stack.c:94 ...) print_report (mm/kasan/report.c:378 ...) kasan_report (mm/kasan/report.c:595) drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581) bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574) drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426) status_store (drivers/gpu/drm/drm_sysfs.c:219) ... vfs_write (fs/read_write.c:595 fs/read_write.c:688) ksys_write (fs/read_write.c:740) |
| CVE-2026-64545 | In the Linux kernel, the following vulnerability has been resolved: net, bpf: check master for NULL in xdp_master_redirect() xdp_master_redirect() dereferences the result of netdev_master_upper_dev_get_rcu() without a NULL check, but that helper returns NULL when the receiving device has no upper-master adjacency. The reach guard only checks netif_is_bond_slave(). On bond slave release bond_upper_dev_unlink() drops the upper-master adjacency before clearing IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window still passes netif_is_bond_slave() while master is already NULL, and faults on master->flags at offset 0xb0: BUG: kernel NULL pointer dereference, address: 00000000000000b0 RIP: 0010:xdp_master_redirect (net/core/filter.c:4432) Call Trace: xdp_master_redirect (net/core/filter.c:4432) bpf_prog_run_generic_xdp (include/net/xdp.h:700) do_xdp_generic (net/core/dev.c:5608) __netif_receive_skb_one_core (net/core/dev.c:6204) process_backlog (net/core/dev.c:6319) __napi_poll (net/core/dev.c:7729) net_rx_action (net/core/dev.c:7792) handle_softirqs (kernel/softirq.c:622) __dev_queue_xmit (include/linux/bottom_half.h:33) packet_sendmsg (net/packet/af_packet.c:3082) __sys_sendto (net/socket.c:2252) Kernel panic - not syncing: Fatal exception in interrupt The missing check dates back to the original code; commit 1921f91298d1 ("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master") later added the master->flags read where the fault now lands but kept the unconditional deref. Check master for NULL before use; a NULL master is treated the same as one that is not up. |
| CVE-2026-64544 | In the Linux kernel, the following vulnerability has been resolved: crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents pefile_digest_pe_contents() computes the trailing-data hash length as pelen - (hashed_bytes + certs_size). A crafted PE can make the addition exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB. This is passed to crypto_shash_update() which reads out of bounds and panics on unmapped vmalloc guard pages. BUG: unable to handle page fault for address: ffffc900038d8000 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152) Call Trace: <TASK> __sha256_update (lib/crypto/sha256.c:208) crypto_sha256_update (crypto/sha256.c:142) verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436) kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151) __do_sys_kexec_file_load (kernel/kexec_file.c:406) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Kernel panic - not syncing: Fatal exception Validate that the addition does not overflow and the result does not exceed pelen before the subtraction. Return -ELIBBAD on failure. |
| CVE-2026-64543 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix use-after-free of the discoverer in tipc_disc_rcv() bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(), but tipc_disc_rcv() still dereferences b->disc in RX softirq under rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv). L2 bearers are safe thanks to the synchronize_net() in tipc_disable_l2_media(), but the UDP bearer defers that call to the cleanup_bearer() workqueue, so the discoverer is freed with no grace period: BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149) Read of size 8 at addr ffff88802348b728 by task poc_tipc/184 <IRQ> tipc_disc_rcv (net/tipc/discover.c:149) tipc_rcv (net/tipc/node.c:2126) tipc_udp_recv (net/tipc/udp_media.c:391) udp_rcv (net/ipv4/udp.c:2643) ip_local_deliver_finish (net/ipv4/ip_input.c:241) </IRQ> Freed by task 181: kfree (mm/slub.c:6565) bearer_disable (net/tipc/bearer.c:418) tipc_nl_bearer_disable (net/tipc/bearer.c:1001) The bearer is freed with kfree_rcu(); free the discoverer the same way. Add an rcu_head to struct tipc_discoverer and free it and its skb from an RCU callback. Because the RCU callback (tipc_disc_free_rcu) lives in module text, a call_rcu() that is still pending when the tipc module is unloaded would invoke a freed function. Add an rcu_barrier() to tipc_exit() after the bearer subsystem has been torn down, so all pending discoverer callbacks have run before the module text goes away. Reachable from an unprivileged user namespace: the TIPCv2 genl family is netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC and CONFIG_TIPC_MEDIA_UDP. |
| CVE-2026-64542 | In the Linux kernel, the following vulnerability has been resolved: ipv6: ndisc: fix NULL deref in accept_untracked_na() accept_untracked_na() re-fetches the inet6_dev with __in6_dev_get(dev) and dereferences idev->cnf.accept_untracked_na without a NULL check, even though its only caller ndisc_recv_na() already fetched and NULL-checked idev for the same device. Both reads of dev->ip6_ptr run in the same RCU read-side critical section, but a concurrent addrconf_ifdown() can clear dev->ip6_ptr between them: lowering the MTU below IPV6_MIN_MTU calls addrconf_ifdown() without the synchronize_net() that orders the unregister path, so the re-fetch returns NULL and oopses: BUG: KASAN: null-ptr-deref in ndisc_recv_na (net/ipv6/ndisc.c:974) Read of size 4 at addr 0000000000000364 Call Trace: <IRQ> ndisc_recv_na (net/ipv6/ndisc.c:974) icmpv6_rcv (net/ipv6/icmp.c:1193) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479) ip6_input_finish (net/ipv6/ip6_input.c:534) ip6_input (net/ipv6/ip6_input.c:545) ip6_mc_input (net/ipv6/ip6_input.c:635) ipv6_rcv (net/ipv6/ip6_input.c:351) </IRQ> It is reachable by an unprivileged user via a network namespace. Pass the caller's already validated idev instead of re-fetching it; the idev stays alive for the whole RCU critical section, so it is safe even after dev->ip6_ptr has been cleared. |
| CVE-2026-64541 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket smc_cdc_rx_handler() looks up the connection by token under the link group's conns_lock, drops the lock, and then dereferences conn and the smc_sock derived from it, ending in sock_hold(&smc->sk) inside smc_cdc_msg_recv(). No reference is held across the lock release. The only reference pinning the socket while the connection is discoverable in the link group is taken in smc_lgr_register_conn() (sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both under conns_lock. Once the handler drops conns_lock, a concurrent close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn() can drop that reference and free the smc_sock, so the handler's later sock_hold() runs on freed memory: WARNING: lib/refcount.c:25 at refcount_warn_saturate Workqueue: rxe_wq do_work refcount_warn_saturate (lib/refcount.c:25) smc_cdc_msg_recv (net/smc/smc_cdc.c:430) smc_cdc_rx_handler (net/smc/smc_cdc.c:502) smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445) tasklet_action_common (kernel/softirq.c:938) handle_softirqs (kernel/softirq.c:622) Kernel panic - not syncing: panic_on_warn set Only SMC-R is affected. The SMC-D receive tasklet is stopped by tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection is unregistered, so it cannot run concurrently with the free. Take the socket reference while still holding conns_lock, so the registration reference can no longer be the last one, and drop it once the handler is done. |
| CVE-2026-64540 | In the Linux kernel, the following vulnerability has been resolved: usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup() genelink_rx_fixup() splits an aggregated RX frame into its individual packets, using a per-packet length taken from device-supplied data. That length is only bounded by GL_MAX_PACKET_LEN (1514); it is never compared against how many bytes were actually received. A malicious GeneLink (GL620A) device can therefore send a short URB whose header claims packet_count > 1 and a first packet of up to 1514 bytes. skb_put_data(gl_skb, packet->packet_data, size); then copies past the end of the receive buffer and hands the adjacent slab contents up the network stack, an out-of-bounds read that leaks kernel heap. No privilege is required: the path runs in the usbnet RX softirq as soon as the interface is up. BUG: KASAN: slab-out-of-bounds in genelink_rx_fixup (drivers/net/usb/gl620a.c:112) Read of size 1514 at addr ffff888011309708 by task ksoftirqd/0/14 Call Trace: ... __asan_memcpy (mm/kasan/shadow.c:105) genelink_rx_fixup (include/linux/skbuff.h:2814 drivers/net/usb/gl620a.c:112) usbnet_bh (drivers/net/usb/usbnet.c:572 drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3405) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ... skb_pull() already verifies that the requested length fits the buffer and returns NULL otherwise. Move it ahead of the copy and check its result, so a packet that overruns the received data is rejected before it is read. Well-formed frames, whose packets are fully present, are unaffected. |
| CVE-2026-64539 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix stack OOB write when prepending the Flags AD eir_create_adv_data() builds the advertising data into a fixed-size buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags" AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies the per-instance data without checking that it still fits: memcpy(ptr, adv->adv_data, adv->adv_data_len); tlv_data_max_len() only reserves those 3 bytes when the user-supplied flags carry a managed-flags bit, so an instance added with flags == 0 is accepted with adv_data_len up to the full buffer. At advertise time the flags are still prepended, and the memcpy() writes 3 + adv_data_len bytes into the size-byte buffer: BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301) Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65 Workqueue: hci0 hci_cmd_sync_work __asan_memcpy (mm/kasan/shadow.c:106) eir_create_adv_data (net/bluetooth/eir.c:301) hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310) hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817) hci_cmd_sync_work (net/bluetooth/hci_sync.c:332) This frame has 1 object: [32, 64) 'cp' The "Flags" structure is added by the kernel, not requested by userspace, so only prepend it when it fits together with the instance advertising data; when there is no room for both, drop the flags rather than the user-provided data. Reachable by a local user with CAP_NET_ADMIN owning an LE-only controller on the legacy advertising path. |
| CVE-2026-64538 | In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix null-ptr-deref in fib6_nh_mtu_change(). fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown() clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(), but this re-fetch is unguarded; nexthop-backed routes survive addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is nulled. Return 0 when idev is NULL, matching rt6_mtu_change_route() and the fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in fib6_mtu()."). Oops: general protection fault, ... KASAN: null-ptr-deref in range [0x00000000000002a8-0x00000000000002af] RIP: 0010:fib6_nh_mtu_change+0x203/0x990 rt6_mtu_change_route+0x141/0x1d0 __fib6_clean_all+0xd0/0x160 rt6_mtu_change+0xb4/0x100 ndisc_router_discovery+0x24b5/0x2cb0 icmpv6_rcv+0x12e9/0x1710 ipv6_rcv+0x39b/0x410 |
| CVE-2026-64537 | In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: reject invalid CCM interval at configuration time ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc). |
| CVE-2026-64536 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop The loop in is_ap_in_tkip() iterates over IEs without verifying that enough bytes remain before dereferencing the IE header or its payload: - pIE->element_id and pIE->length are read without checking that i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the buffer causes an OOB read. - For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12, which requires pIE->length >= 16. For WLAN_EID_RSN it compares pIE->data + 8, requiring pIE->length >= 12. Neither requirement is checked. Add the missing IE header and payload bounds checks and guard each data access with an explicit pIE->length minimum, matching the pattern established in update_beacon_info(). |
| CVE-2026-64535 | In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Fix potential UAF when ddgst mismatch Shivam Kumar found via vulnerability testing: When data digest is enabled on an NVMe/TCP connection and a digest mismatch occurs on a non-final H2C_DATA PDU during an R2T-based data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst() calls nvmet_req_uninit() — which performs percpu_ref_put() on the submission queue — but does NOT mark the command as completed. It does not set cqe->status, does not modify rbytes_done, and does not clear any flag. When the subsequent fatal error triggers queue teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands, checks nvmet_tcp_need_data_in() for each one, and finds that the already-uninited command still appears to need data (because rbytes_done < transfer_len and cqe->status == 0). It therefore calls nvmet_req_uninit() a second time on the same command — a double percpu_ref_put against a single percpu_ref_get. |
| CVE-2026-64534 | In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected, nvmet_req_uninit() is called unconditionally. However, if the command arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init() had returned false and percpu_ref_tryget_live() was never executed. The unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a refcount underflow, leading to a WARNING in percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and eventually a permanent workqueue deadlock. Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling nvmet_req_uninit(), matching the existing pattern in nvmet_tcp_execute_request(). |
| CVE-2026-64533 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate lcns_follow in log_replay conversion log_replay() converts DIR_PAGE_ENTRY_32 records into DIR_PAGE_ENTRY records when replaying version 0 restart tables. During this conversion, the memmove() length is derived directly from the on-disk lcns_follow field: memmove(&dp->vcn, &dp0->vcn_low, 2 * sizeof(u64) + le32_to_cpu(dp->lcns_follow) * sizeof(u64)); check_rstbl() validates restart table structure, but does not constrain per-entry lcns_follow values relative to the entry size. A malformed filesystem image can provide an oversized lcns_follow value, causing the conversion memmove() to access memory beyond the bounds of the allocated restart table buffer. The same field is later used to bound iteration over page_lcns[], so validating lcns_follow during conversion also prevents downstream out-of-bounds access from the same malformed metadata. Compute the maximum valid lcns_follow from the already-validated restart table entry size and reject entries that exceed this bound. Reuse the existing t16/t32 scratch variables already declared in log_replay() to avoid introducing new declarations. [almaz.alexandrovich@paragon-software.com: fixed the conflicts] |
| CVE-2026-64532 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation} In do_action()'s UpdateRecordDataRoot (fslog.c:3489) and UpdateRecordDataAllocation (fslog.c:3697) cases, the memmove destination is `Add2Ptr(e, le16_to_cpu(e->view.data_off))`, where e->view.data_off comes from an on-disk NTFS_DE inside an INDEX_ROOT or INDEX_BUFFER. Neither case validates view.data_off + dlen against e->size; the existing check_if_index_root / check_if_alloc_index helpers walk the entry chain and validate the entry's offset, but not its internal view fields. The neighbouring read sites (e.g., fs/ntfs3/index.c when iterating view entries) check view.data_off + view.data_size <= e->size. Apply the same bound at the two memmove sites. Reproduced under UML+KASAN on mainline 8d90b09e6741 via pr_warn-only probe instrumentation: with view.data_off forced to 0xFFFC, the memmove writes 32 bytes past the end of the NTFS_DE. This is similar in shape to Pavitra Jha's 2026-05-02 patch "fs/ntfs3: prevent oob in case UpdateRecordDataRoot" (<20260502105008.21827-1-jhapavitra98@gmail.com>) which proposes calling ntfs3_bad_de_range(); that helper does not exist in mainline. This patch uses inline checks. |
| CVE-2026-64530 | In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the defragmentation engine (e.g. act_ct on out-of-order fragments). When that happens the skb is no longer owned by the caller and must not be touched again. tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the switch and returned the skb to the caller as if classification had passed. The only qdisc that wires up qevents today is RED, via three call sites (qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop) red_enqueue() was continuing to operate on an skb it no longer owns in this case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF. tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10 tc filter add block 10 ... action ct (with ct defrag enabled and traffic that produces out-of-order fragments, e.g. a fragmented UDP stream) Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress and egress fast paths do: treat it as stolen and return NULL without touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be dropped/freed here, as it is no longer owned by us. |
| CVE-2026-64528 | In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung: Remove redundant port lock acquisition in rx helpers Sashiko identified a deadlock when the console flow is engaged [1]. When console flow control is enabled (UPF_CONS_FLOW), s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable(). The serial core framework invokes the .stop_tx() and .start_tx() callbacks with the port->lock spinlock already held. Furthermore, all internal driver paths that invoke stop_tx (such as the DMA TX completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the serial core). However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable() unconditionally attempt to acquire port->lock again using uart_port_lock_irqsave(). Since spinlocks are not recursive, this causes a deadlock on the same CPU when console flow control is engaged. Remove the redundant lock acquisition from both rx helper functions. |
| CVE-2026-64527 | In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: validate VMBus packet size in receive callback hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one of four message-type branches without knowing how many bytes the host wrote into hv->recv_buf. The completion path then runs memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that wakes on wait_for_completion_timeout() can read up to 16 KiB of residue from a prior message as if it were the response payload. Pass bytes_recvd into hyperv_receive_sub() and reject any packet that does not cover the pipe + synthvid header. A single switch on msg->vid_hdr.type then computes the type-specific payload size: the three completion-driving types (SYNTHVID_VERSION_RESPONSE, SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through to a shared exit that requires that size before memcpy/complete, while SYNTHVID_FEATURE_CHANGE validates its own payload and returns before reading is_dirt_needed. Unknown types are dropped. SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT array. Validate the fixed prefix first so resolution_count can be read, bound it against the array, then require only the count-sized array, so the shorter responses the host actually sends are accepted. Only run the sub-handler when vmbus_recvpacket() returned success. The memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead reports the required length, which can exceed hv->recv_buf, so copying bytes_recvd would read and write past the 16 KiB buffers. Gating on the success return keeps the copy bounded. The nonzero-return path is itself a malformed-message case and is now logged rather than silently skipped; channel recovery is not attempted. Rejected packets are reported via drm_err_ratelimited() rather than silently dropped, matching the CoCo-hardened pattern in hv_kvp_onchannelcallback(). |
| CVE-2026-64525 | In the Linux kernel, the following vulnerability has been resolved: xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit The struct pernet_operations docstring in include/net/net_namespace.h explicitly warns against blocking RCU primitives in .exit handlers: Exit methods using blocking RCU primitives, such as synchronize_rcu(), should be implemented via exit_batch. [...] Please, avoid synchronize_rcu() at all, where it's possible. Note that a combination of pre_exit() and exit() can be used, since a synchronize_rcu() is guaranteed between the calls. xfrm_policy_fini() violates this: it calls synchronize_rcu() before freeing the policy_bydst hash tables (so no RCU reader is mid- traversal at free time), but runs from xfrm_net_ops.exit -- once per namespace -- so a cleanup_net() of N namespaces pays N full RCU grace periods serially. Use the documented pre_exit/exit split. Move the policy flush (and the workqueue drains it depends on) into a new .pre_exit handler; xfrm_policy_fini() then runs in .exit and frees the hash tables after the synchronize_rcu_expedited() that cleanup_net() guarantees between the two phases. Providing O(1) RCU grace periods per batch instead of O(N). Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET) at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and __put_net counts were balanced, ruling out a refcount leak. |
| CVE-2026-64524 | In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: validate resolution_count and fix WIN8 fallback A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the parse loop. Bound resolution_count against the array size, folded into the existing zero-check. When the WIN10 resolution probe fails, the caller in hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated, which sets mode_config.max_width / max_height to 0 and makes drm_internal_framebuffer_create() reject every userspace framebuffer with -EINVAL. The pre-WIN10 branch had the same gap for preferred_width / preferred_height. Use a single post-probe fallback guarded by screen_width_max == 0 so both paths converge on the WIN8 defaults. |
| CVE-2026-64514 | In the Linux kernel, the following vulnerability has been resolved: userfaultfd: gate must_wait writability check on pte_present() userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE without taking the page table lock and then apply pte_write() / huge_pte_write() to it. Those accessors decode bits from the present encoding only; on a swap or migration entry they read the offset bits that happen to share the same position and return an undefined result. The intent of the check is "is this fault still WP-blocked?". A non-marker swap entry means the page is in transit -- the userfault context the original fault delivered against is no longer the same, and the swap-in or migration completion path will re-deliver a fresh fault if userspace still needs to handle it. Worst case under the current code the garbage write bit says "wait", and the thread stays asleep until a UFFDIO_WAKE that may never arrive. Gate the writability check on pte_present() so the lockless re-check only inspects present-PTE bits when the entry is actually present. The non-present, non-marker case returns "don't wait" and lets the fault path retry. |
| CVE-2026-64512 | In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Suppress UBSAN warning caused by field misuse The definition of reg->access_width changes depending on the reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses access_width to indicate the PCC region, which can result in a UBSAN if the value is greater than 4. For example: UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9 shift exponent 32 is too large for 32-bit type 'int' CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy) Hardware name: To be filled by O.E.M. Call trace: ...(trimming) ubsan_epilogue+0x10/0x48 __ubsan_handle_shift_out_of_bounds+0xdc/0x1e0 cpc_write+0x4d0/0x670 cppc_set_perf+0x18c/0x490 cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq] ... (trimming) Lets fix this by validating the region type, as well as whether access_width has a value. Then since we are returning bit_width directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting the size. |
| CVE-2026-64511 | In the Linux kernel, the following vulnerability has been resolved: ACPI: NFIT: core: Fix possible NULL pointer dereference After commit 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler before getting NFIT table"), acpi_nfit_probe() installs an ACPI notify handler for the NFIT device before checking the presence of the NFIT table. If that table is not there, 0 is returned without allocating the acpi_desc object and setting the driver data pointer of the NFIT device. If the platform firmware triggers an NFIT_NOTIFY_UC_MEMORY_ERROR notification on the NFIT device at that point, acpi_nfit_uc_error_notify() will dereference a NULL pointer. Prevent that from occurring by adding an acpi_desc check against NULL to acpi_nfit_uc_error_notify(). |
| CVE-2026-64510 | In the Linux kernel, the following vulnerability has been resolved: ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup If acpi_nfit_init() fails after adding the acpi_desc object to the acpi_descs list, that object is never removed from that list because the acpi_nfit_shutdown() devm action is not added for the NFIT device in that case. Next, the acpi_nfit_init() failure causes acpi_nfit_probe() to fail, the acpi_desc object is freed, and a dangling pointer is left behind in the acpi_descs. Any subsequent ACPI Machine Check Exception will trigger nfit_handle_mce() which iterates over acpi_descs and so a use-after-free will occur. Moreover, if acpi_nfit_probe() returns 0 after installing a notify handler for the NFIT device and without allocating the acpi_desc object and setting the NFIT device's driver data pointer, the acpi_desc object will be allocated by acpi_nfit_update_notify() and acpi_nfit_init() will be called to initialize it. Regardless of whether or not acpi_nfit_init() fails in that case, the acpi_nfit_shutdown() devm action is not added for the NFIT device and acpi_desc is never removed from the acpi_descs list. If the acpi_desc object is freed subsequently on driver removal, any subsequent ACPI MCE will lead to a use-after-free like in the previous case. To address the first issue mentioned above, make acpi_nfit_probe() call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and to address the other one, add a remove callback to the driver and make it call acpi_nfit_shutdown(). Also, since it is now possible to pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it may not have been initialized, add checks against NULL for acpi_desc and its nvdimm_bus field to that function and make acpi_nfit_unregister() clear the latter after unregistering the NVDIMM bus. |
| CVE-2026-64508 | In the Linux kernel, the following vulnerability has been resolved: bpf: Support for hardening against JIT spraying The BPF JIT allocator packs many small programs into larger executable allocations and reuses space within those allocations as programs are loaded and freed. When fresh code is written into space that a previous program occupied, an indirect jump into the new program can reuse a branch prediction left behind by the old one. Flush the indirect branch predictors before reusing JIT memory so that indirect jumps into a newly written program don't reuse predictions from an old program that occupied the same space. Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush static call for flushing the branch predictors on JIT memory reuse. Architectures that need a flush, can update it to a predictor flush function. By default, its a NOP and does not emit any CALL. Allocations larger than a pack are not covered by this flush. That is safe because cBPF programs (the unprivileged attack surface) are bounded well below a pack size. Issue a warning if this assumption is ever violated while the flush is active. |
| CVE-2026-64507 | In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Enable IBPB flush on BPF JIT allocation Enable hardening against JIT spraying when Spectre-v2 mitigations are in use. Specifically, issue an IBPB flush on BPF JIT memory reuse. Skip enabling the IBPB flush if the BPF dispatcher is already using a retpoline sequence. This hardening applies only when BPF-JIT is in use. Guard the enabling under CONFIG_BPF_JIT so that bugs.c still builds with CONFIG_BPF_JIT=n. |
| CVE-2026-64505 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: function: rndis: add length check for header Add a length check for the rndis header in rndis_rm_hdr, to ensure that MessageType, MessageLength, DataOffset, and DataLength fields are present before they are accessed. |
| CVE-2026-64504 | In the Linux kernel, the following vulnerability has been resolved: iio: accel: bmc150: clamp the device-reported FIFO frame count __bmc150_accel_fifo_flush() copies the number of samples the device reports in its hardware FIFO into an on-stack buffer u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The frame count is read from the FIFO_STATUS register and only masked to its 7 valid bits: count = val & 0x7F; so it can be 0..127. The only other limit applied to it is the optional caller-supplied sample budget: if (samples && count > samples) count = samples; which does not constrain count on the flush-all path (samples == 0), and leaves it well above 32 whenever samples is larger. count samples are then transferred into buffer[]: bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a malfunctioning, malicious or counterfeit accelerometer (or an attacker tampering with the I2C/SPI bus) that reports up to 127 frames writes up to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up to 570 bytes that clobbers the stack canary, saved registers and the return address. Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[] is sized for, before the transfer, mirroring the watermark clamp already done in bmc150_accel_set_watermark(). A well-formed flush reports at most BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. |
| CVE-2026-64503 | In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync() but returns -EINVAL directly when a scale with a non-zero integer part is requested, skipping the matching pm_runtime_put_autosuspend(). This leaks a runtime PM usage-counter reference on every such write, after which the device can no longer autosuspend. Set the error code and fall through to the existing put instead of returning early. |
| CVE-2026-64500 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: lpc32xx: Initialize completion before requesting IRQ In the report from Jaeyoung Chung: "lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its interrupt handler with devm_request_irq() before it initializes st->completion with init_completion(). If an interrupt arrives after devm_request_irq() and before init_completion(), the handler calls complete() on an uninitialized completion, causing a kernel panic. The probe path, in lpc32xx_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0, LPC32XXAD_NAME, st); /* register handler */ ... init_completion(&st->completion); /* initialize completion */ lpc32xx_adc_isr() calls complete(): complete(&st->completion); If the device raises an interrupt before init_completion() runs, complete() acquires the uninitialized wait.lock and walks the zeroed task_list in swake_up_locked(). The zeroed task_list makes list_empty() return false, so swake_up_locked() dereferences a NULL list entry, triggering a KASAN wild-memory-access." Fix the chance of a spurious IRQ causing an uninitialized pointer dereference by moving init_completion() above devm_request_irq(). |
| CVE-2026-64497 | In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: Cleanup initializations and fix sign-extension bug Include linux/bitfield.h for FIELD_GET(). Create new macros for bit manipulation in combination with manual bit manipulation being replaced with FIELD_GET(). The current variable declaration and initializations are barely readable and use comma separations across multiple lines. Refactor the initializations so that mantissa and exp have separate declarations and sign gets initialized later. In addition (and due to the nature of the cleanup), fix a sign-extension bug where, float32 would get bitwise anded with ~BIT(31) (which is 0xFFFFFFFF7FFFFFFF) which corrupted the exponent. |
| CVE-2026-64496 | In the Linux kernel, the following vulnerability has been resolved: iio: event: Fix event FIFO reset race `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. That can leave the FIFO with an `out` index past the `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace. Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is marked busy, but the new fd has not been installed yet, so userspace cannot access it while the FIFO is reset. |
| CVE-2026-64495 | In the Linux kernel, the following vulnerability has been resolved: iio: gyro: bmg160: bail out when bandwidth/filter is not in table bmg160_get_filter() walks bmg160_samp_freq_table[] looking for the entry matching the bw_bits value read from the chip: for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) { if (bmg160_samp_freq_table[i].bw_bits == bw_bits) break; } *val = bmg160_samp_freq_table[i].filter; If no entry matches, i ends up equal to the array size and the next line reads one slot past the end. bmg160_set_filter() has the same shape, driven by 'val' instead of bw_bits. smatch flags both: drivers/iio/gyro/bmg160_core.c:204 bmg160_get_filter() error: buffer overflow 'bmg160_samp_freq_table' 7 <= 7 drivers/iio/gyro/bmg160_core.c:222 bmg160_set_filter() error: buffer overflow 'bmg160_samp_freq_table' 7 <= 7 Return -EINVAL when no entry matches. The set_filter() path is reachable from userspace via the sysfs in_anglvel_filter_low_pass_3db_frequency interface, so userspace can trivially trigger the out-of-bounds read with a value that is not in bmg160_samp_freq_table[].filter. |
| CVE-2026-64494 | In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap002: fix runtime PM leak on read error gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the lux value, but if gp2ap002_get_lux() fails, it returns directly. This skips the pm_runtime_put_autosuspend() call at the "out" label, permanently leaking a runtime PM reference and preventing the device from autosuspending. Replace the direct return with a "goto out" to ensure the reference is properly dropped on the error path. |
| CVE-2026-64493 | In the Linux kernel, the following vulnerability has been resolved: iio: pressure: mpl115: fix runtime PM leak on read error mpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync() before reading the processed pressure or raw temperature, but on the read error path it returns without calling pm_runtime_put_autosuspend(). Each failed read therefore leaks a runtime PM reference and prevents the device from autosuspending. Drop the reference before checking the return value so both the success and error paths are balanced. |
| CVE-2026-64489 | In the Linux kernel, the following vulnerability has been resolved: ALSA: ymfpci: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_ymfpci_create_spdif_controls() does not check the return value before dereferencing kctl->id.device, which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails. |
| CVE-2026-64488 | In the Linux kernel, the following vulnerability has been resolved: ALSA: aoa: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. In layout.c, the function does not check the return value before dereferencing ctl->id.name or passing to aoa_snd_ctl_add(), which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return early if any fails. |
| CVE-2026-64487 | In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every iteration it advances buf and subtracts the block size while looping on "while (len)". len is urb->actual_length. That value is supplied by the device and is not guaranteed to be a multiple of 16. When a final short block leaves len between 1 and 15, the loop runs once more, reads up to buf[15], and then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows to a huge value. The loop then keeps iterating and walking buf far past the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus block id happens to be hit. Iterate only while a full message block is available. This stops the unsigned underflow and silently drops any trailing partial block, which carries no complete control value anyway. The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1 and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor urb->actual_length before dispatching. |
| CVE-2026-64486 | In the Linux kernel, the following vulnerability has been resolved: ALSA: cmipci: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_cmipci_spdif_controls() does not check the return value before dereferencing kctl->id.device, which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails. |
| CVE-2026-64484 | In the Linux kernel, the following vulnerability has been resolved: ALSA: es1938: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_es1938_mixer() does not check the return value before dereferencing the pointer, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. |
| CVE-2026-64483 | In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. |
| CVE-2026-64482 | In the Linux kernel, the following vulnerability has been resolved: ALSA: gus: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_gf1_pcm_volume_control() does not check the return value before dereferencing kctl->id.index, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. |
| CVE-2026-64481 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs35l41: Fix firmware load work teardown cs35l41_hda creates ALSA controls whose private data points at the cs35l41_hda object. The firmware load control can also queue fw_load_work. Those controls are not removed on component unbind, and device remove only cancels fw_load_work through cs35l41_remove_dsp(). That helper is skipped when halo_initialized is false. With firmware_autostart disabled, a firmware load can be requested before the DSP has been initialized. If the component or device is removed before the queued work runs, the worker can run after teardown and dereference driver state that is no longer valid. Track the created controls and remove them on unbind so no new control callback can reach the driver data or queue more work. Then cancel fw_load_work to drain any request that was already queued. Also cancel the work unconditionally during device remove before runtime PM teardown. |
| CVE-2026-64480 | In the Linux kernel, the following vulnerability has been resolved: ALSA: ice1712: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. The ice1712 driver calls snd_ctl_new1() without checking the return value before dereferencing the pointer in multiple places (ice1712.c, ice1724.c, aureon.c), which can lead to NULL pointer dereferences. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails. |
| CVE-2026-64479 | In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup() snd_seq_event_dup() copies an incoming event into a pool cell and, in the UMP-enabled build, clears the trailing cell->ump.raw.extra word that the memcpy() did not cover. The guard deciding whether to clear it compares the copied size against sizeof(cell->event): memcpy(&cell->ump, event, size); if (size < sizeof(cell->event)) cell->ump.raw.extra = 0; For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) == sizeof(cell->event), so the condition is false and the extra word keeps stale data. The cell pool is allocated with kvmalloc() (not zeroed) and cells are reused via a free list, so that word holds uninitialised heap or leftover event data. When such a cell is delivered to a UMP client (client->midi_version > 0) that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches it unconverted -- snd_seq_read() reads it out as the larger struct snd_seq_ump_event and copies the stale word to user space, a 4-byte kernel heap infoleak to an unprivileged /dev/snd/seq client. Compare against sizeof(cell->ump) instead, so the trailing word is zeroed for every event shorter than the UMP cell. |
| CVE-2026-64478 | In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device preserves the check without dereferencing kobject names during disconnect. |
| CVE-2026-64476 | In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Latch disable_idle_d3 per device When disable_idle_d3 was introduced in vfio-pci, it directly manipulated the device power state with pci_set_power_state(). There were no refcounts to maintain or balanced operations, we could unconditionally bring the device to D0 and conditionally move it to D3hot. Therefore the module parameter was made writable. Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect of the module parameter was nullified. The parameter value could still be changed through sysfs, but the vfio-pci driver latched the values into vfio-pci-core globals at module init. Loading the vfio-pci module, or unloading and reloading, with non-default or different values could change the globals relative to existing devices bound to vfio-pci variant drivers. Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM"), which marks the point where power states became refcounted. PM get and put operations need to be balanced, but the same module operations noted above can change the global variables relative to those devices already bound to vfio-pci variant drivers. This introduces a window where PM operations can now become unbalanced. To resolve this with a narrow footprint for stable backports, the disable_idle_d3 flag is latched into the vfio_pci_core_device at the time of initialization, such that the device always operates with a consistent value. NB. vfio_pci_dev_set_try_reset() now unconditionally raises the runtime PM usage count around bus reset to account for disable_idle_d3 becoming a per-device rather than global flag. When this flag is set, the additional get/put pair is harmless and allows continued use of the shared vfio_pci_dev_set_pm_runtime_get() helper. |
| CVE-2026-64475 | In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Release the VGA arbiter client on register_device() failure The re-order in the Fixes commit below displaced vfio_pci_vga_init() as the last failure point of what is now vfio_pci_core_register_device() without introducing an unwind for the VGA arbiter registration. In current kernels this is mostly benign because vfio_pci_set_decode() only uses pci_dev state, but the original failure path could leave a callback with a freed vdev cookie. The stale registration also becomes unsafe again once the callback follows drvdata to the vfio device. Add the required VGA unwind callout. |
| CVE-2026-64474 | In the Linux kernel, the following vulnerability has been resolved: vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time, looping to skip optional states the device does not support until *next_fsm is supported. A blocked transition is encoded as VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL. The skip loop does not account for the ERROR sentinel. state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is ERROR, so once *next_fsm becomes ERROR the loop condition stays true and *next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a precopy-capable device, causing the loop to spin forever while holding the driver state mutex. This can result in a soft lockup, and a panic with softlockup_panic set. Terminate the skip loop on the ERROR sentinel so a blocked transition falls through to the existing return and reports -EINVAL. |
| CVE-2026-64473 | In the Linux kernel, the following vulnerability has been resolved: vfio: Remove device debugfs before releasing devres VFIO device debugfs files created with debugfs_create_devm_seqfile() store a devres allocated debugfs_devm_entry as inode private data. vfio_unregister_group_dev() currently calls vfio_device_del() before vfio_device_debugfs_exit(), but device_del() releases devres. This can leave debugfs entries visible with stale inode private data while unregister waits for userspace references to drain. Remove the per-device debugfs tree before vfio_device_del(). The debugfs view is diagnostic only, so losing it at the start of unregister is preferable to preserving entries whose backing storage may already have been released. Complete the teardown by clearing the per-device debugfs root after removal. This matches the global debugfs root cleanup and prevents future users from mistaking a removed dentry for a live debugfs tree during the remainder of unregister. |
| CVE-2026-64472 | In the Linux kernel, the following vulnerability has been resolved: vfio/mlx5: Fix racy bitfields and tighten struct layout Bitfield operations are not atomic, they use a read-modify-write pattern, therefore we should be careful not to pack bitfields that can be concurrently updated into the same storage unit. This split takes a binary approach: flags that are only modified pre/post open/close remain bitfields, flags modified from user action, including actions that reach across to another device (ex. reset) use dedicated storage units. Note mlx5_vhca_page_tracker.status is relocated to fill the alignment hole this split exposes. Bitfield justifications: migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe Dedicated storage units: mdev_detach: written in the VF attach/detach event notifier mlx5fv_vf_event() at runtime log_active: written in mlx5vf_start_page_tracker()/ mlx5vf_stop_page_tracker() during runtime dirty tracking deferred_reset: written in mlx5vf_state_mutex_unlock()/ mlx5vf_pci_aer_reset_done() during runtime reset handling is_err: set by tracker error handling and dirty-log polling at runtime object_changed: set by tracker event handling and cleared by dirty-log polling at runtime |
| CVE-2026-64471 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free on registration failure Make sure to release the sibling interfaces in case controller registration fails to avoid use-after-free and double-free when they are eventually disconnected. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. |
| CVE-2026-64470 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free on marvell probe failure Make sure to stop any TX URBs submitted during Marvell OOB wakeup configuration on later probe failures to avoid use-after-free in the completion callback. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. |
| CVE-2026-64469 | In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_thread_release() When a thread exits, binder_thread_release() walks its transaction stack to clear the t->from and t->to_proc that correspond with the exiting thread. However, a process dying in parallel might attempt to kfree some of these transactions. And if one of them has no associated t->to_proc, the t->to_proc->inner_lock will not be acquired. This means that transaction accesses in binder_thread_release() after t->to_proc has been cleared might race with binder_free_transaction() and cause a use-after-free error as reported by KASAN: ================================================================== BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798 Write of size 8 at addr ffff000016627500 by task X/715 CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_thread_release+0x5d0/0x798 binder_ioctl+0x12c0/0x299c [...] Allocated by task 717 on cpu 18 at 67.267803s: __kasan_kmalloc+0xa0/0xbc __kmalloc_cache_noprof+0x174/0x444 binder_transaction+0x554/0x8150 binder_thread_write+0xa30/0x4354 binder_ioctl+0x20f0/0x299c [...] Freed by task 202 on cpu 18 at 90.416221s: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_free_transaction+0x150/0x294 binder_send_failed_reply+0x398/0x6d8 binder_release_work+0x3e4/0x4ec binder_deferred_func+0xbd8/0x104c [...] ================================================================== In order to avoid this, make sure that binder_free_transaction() reads the t->to_proc under the transaction lock. This will serialize the transaction release with the accesses in binder_thread_release(). Plus, it matches the documented locking rules for @to_proc. |
| CVE-2026-64468 | In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_free_transaction() In binder_free_transaction(), the t->to_proc is read under the t->lock. However, once the t->lock is dropped, the to_proc can die in parallel. This leads to a use-after-free error when we attempt to acquire its inner lock right afterwards: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0 Write of size 4 at addr ffff00001125da70 by task B/672 CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x1a0 binder_free_transaction+0x8c/0x320 binder_send_failed_reply+0x21c/0x2f8 binder_thread_release+0x488/0x7e0 binder_ioctl+0x12c0/0x29a0 [...] Allocated by task 675: __kmalloc_cache_noprof+0x174/0x444 binder_open+0x118/0xb70 do_dentry_open+0x374/0x1040 vfs_open+0x58/0x3bc [...] Freed by task 212: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_proc_dec_tmpref+0x32c/0x5e0 binder_deferred_func+0xc48/0x104c process_one_work+0x53c/0xbc0 [...] ================================================================== To prevent this, pin the target thread (t->to_thread) to guarantee the target process remains alive. Undelivered transactions without a target thread are already safe, as the target process can only be the current context in those paths. |
| CVE-2026-64465 | In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix sleep in atomic context in xhci_free_streams() When a USB device with active stream endpoints is disconnected, xhci_free_streams() is called from the hub_event workqueue to free the stream resources. It calls xhci_free_stream_info() while holding xhci->lock with irqs disabled. xhci_free_stream_info() invokes xhci_free_stream_ctx(), which calls dma_free_coherent() for large stream context arrays. dma_free_coherent() can sleep (e.g. via vunmap), triggering a BUG when called from atomic context. Call trace: dma_free_attrs+0x174/0x220 xhci_free_stream_info+0xd0/0x11c xhci_free_streams+0x278/0x37c usb_free_streams+0x98/0xc0 usb_unbind_interface+0x1b8/0x2f8 device_release_driver_internal+0x1d4/0x2cc device_release_driver+0x18/0x28 bus_remove_device+0x160/0x1a4 device_del+0x1ec/0x350 usb_disable_device+0x98/0x214 usb_disconnect+0xf0/0x35c hub_event+0xab4/0x19ec process_one_work+0x278/0x63c Fix this by saving the stream_info pointers and clearing the ep references under the lock, then calling xhci_free_stream_info() outside the lock where sleeping is allowed. |
| CVE-2026-64463 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci_rt1711h: unregister TCPCI port with devres rt1711h_probe() registers the TCPCI port before requesting the interrupt and enabling alert interrupts. If either of those later steps fails, the probe function returns without unregistering the TCPCI port. The explicit unregister currently only happens from the remove callback. Register a devres action immediately after tcpci_register_port() succeeds, so tcpci_unregister_port() runs on later probe failures and on driver detach. Drop the remove callback to avoid unregistering the same port twice. This issue was identified during our ongoing static-analysis research while reviewing kernel code. |
| CVE-2026-64462 | In the Linux kernel, the following vulnerability has been resolved: PCI: altera: Fix resource leaks on probe failure The chained IRQ handler is set during probe, but is only removed during the driver remove(). If pci_host_probe() fails, the handler and INTx IRQ domain remain set even though the devm-managed host bridge storage containing struct altera_pcie will be released, leaving the handler with a stale data pointer. Interrupts are also enabled before pci_host_probe() is called. If probe fails after that point, the controller interrupt source should be disabled before the chained handler and INTx domain are removed. So set the chained handler only after the INTx domain has been created. Disable controller interrupts during IRQ teardown, and tear the IRQ setup down if pci_host_probe() fails. [mani: commit log] |
| CVE-2026-64461 | In the Linux kernel, the following vulnerability has been resolved: PCI: mediatek: Fix IRQ domain leak when port fails to enable When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port from pcie->ports and frees the port structure. However, the IRQ domains set up earlier by mtk_pcie_init_irq_domain() are never freed. Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper, mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in the probe error path (during resume, child devices may have active MSI mappings and the NOIRQ context prohibits sleeping locks), mtk_pcie_enable_port() is changed to return an error code so callers can distinguish the two paths and act accordingly. This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC support series. |
| CVE-2026-64458 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: handle extreme intervals in damon_hot_score() Fix three issues in damon_hot_score() that comes from wrong handling of extreme (zero or too high) monitoring intervals user setup. When the user sets sampling interval zero, damon_max_nr_accesses(), which is called from damon_hot_score(), causes a divide-by-zero. Needless to say, it is a problem. When the user sets the aggregation interval zero, the function returns zero. It is wrong, since the real maximum nr_acceses in the setup should be one. Worse yet, it can cause another divide-by-zero from its caller, damon_hot_score(), since it uses damon_max_nr_accesses() return value as a denominator. When the user sets the aggregation interval very high, damon_hot_score() could return a value out of [0, DAMOS_MAX_SCORE] range. Since the return value is used as an index to the regions_score_histogram array, which is DAMOS_MAX_SCORE+1 size, it causes out of bounds array access. The issues can be relatively easily reproduced like below. The sysfs write permission is required, though. # ./damo start --damos_action lru_prio --damos_quota_space 100M \ --damos_quota_interval 1s # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/monitoring_attrs/intervals/sample_us # echo 0 > contexts/0/monitoring_attrs/intervals/aggr_us # echo commit > state # dmesg [...] [ 131.329762] Oops: divide error: 0000 [#1] SMP NOPTI [...] [ 131.336089] RIP: 0010:damon_hot_score+0x27/0xd0 [...] Fix the divide-by-zero intervals problems by explicitly handling the zero intervals in damon_max_nr_accesses(). Fix the out-of-bound array access by applying [0, DAMOS_MAX_SCORE] bounds before returning from damon_hot_score(). The issue was discovered [1] by Sashiko. |
| CVE-2026-64456 | In the Linux kernel, the following vulnerability has been resolved: hwrng: virtio: clamp device-reported used.len at copy_data() random_recv_done() stores the device-reported used.len directly into vi->data_avail. copy_data() then indexes vi->data[] using vi->data_idx (advanced by previous copy_data() calls) and issues a memcpy() without re-validating either value against the posted buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32 or 64). A malicious or buggy virtio-rng backend can set used.len beyond sizeof(vi->data), steering the memcpy() past the end of the inline array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes those bytes into the guest RNG, and guest root can also observe them directly via /dev/hwrng. Concrete impact is inside the guest: - Memory-safety / hardening: any virtio-rng backend that over-reports used.len causes the driver to read past vi->data into unrelated slab contents. hwrng_fillfn() is a kernel thread that runs as soon as the device is probed; no guest userspace interaction is required to first-trigger the OOB. - Cross-boundary leak (confidential-compute threat model): a malicious hypervisor cooperating with a malicious or compromised guest root userspace can use /dev/hwrng as a leak channel for guest-kernel heap data. The host sets a large used.len, guest root reads /dev/hwrng, and the returned bytes contain guest kernel slab contents that were adjacent to vi->data. In practice, confidential-compute guests (SEV-SNP, TDX) usually disable virtio-rng entirely, so this path is narrow, but the fix is still worth carrying because the underlying memory-safety bug contaminates the guest RNG on any host. KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend has been patched to report used.len = 0x10000: BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0 Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52 Call Trace: __asan_memcpy+0x23/0x60 virtio_read+0x394/0x5d0 hwrng_fillfn+0xb2/0x470 kthread+0x2cc/0x3a0 Allocated by task 1: probe_common+0xa5/0x660 virtio_dev_probe+0x549/0xbc0 The buggy address belongs to the object at ffff88800ae0b800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes to the right of allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20) Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened usb9pfs_rx_complete() against unchecked device-reported length in the USB 9p transport. With the clamp at point of use and array_index_nospec() in place, the same harness boots cleanly: copy_data() returns zero for the bogus report, the device-supplied bytes after data_idx are discarded, and the driver issues a fresh request. |
| CVE-2026-64455 | In the Linux kernel, the following vulnerability has been resolved: USB: chaoskey: Fix slab-use-after-free in chaoskey_release() The chaoskey driver has a use-after-free bug in its release routine. If the user closes the device file after the USB device has been unplugged, a debugging log statement will try to access the usb_interface structure after it has been deallocated: BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406) Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106 Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dev_driver_string (drivers/base/core.c:2406) __dynamic_dev_dbg (lib/dynamic_debug.c:906) chaoskey_release (drivers/usb/misc/chaoskey.c:323) __fput (fs/file_table.c:510) fput_close_sync (fs/file_table.c:615) __x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The driver's last reference to the interface structure is dropped in the chaoskey_free() routine, so the code must not use the interface -- even in a debugging statement -- after that routine returns. (Exception: If we know that another reference is held by someone else, such as the device core while the disconnect routine runs, there's no problem. Thanks to Johan Hovold for pointing this out.) Since the bad access is part of an unimportant debugging statement, we can fix the problem simply by removing the whole statement. |
| CVE-2026-64454 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: run gadget disconnect from sleepable suspend context dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls dwc3_disconnect_gadget(). For async callbacks that helper only uses plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback still runs with IRQs disabled and any sleepable callback trips Lockdep. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the dwc3_gadget_suspend() -> dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and Lockdep reported: BUG: sleeping function called from invalid context gadget_disconnect+0x21/0x39 [vuln_msv] dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv] Keep the disconnect callback selection in one common helper, but add a sleepable suspend-side wrapper which snapshots the callback under dwc->lock and then runs it after spin_unlock_irqrestore(). The regular event path still uses the existing spin_unlock()/spin_lock() window. |
| CVE-2026-64452 | In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix NHC entry use-after-free on error path lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding lowpan_nhc_lock. If the descriptor has no uncompress callback, the error path drops the lock before printing nhc->name. lowpan_nhc_del() removes descriptors under the same lock and then relies on synchronize_net() before the owning module can be unloaded. That only waits for net RX RCU readers. lowpan_header_decompress() is also exported and can be reached from callers that are not necessarily covered by the net core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive path. This leaves a race where one task drops lowpan_nhc_lock in the error path, another task unregisters and frees the matching descriptor after synchronize_net() returns, and the first task then dereferences nhc->name for the warning. With the post-unlock window widened, KASAN reports: BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220 Read of size 8 lowpan_nhc_do_uncompression lowpan_header_decompress Fix this by printing the warning before dropping lowpan_nhc_lock, so the descriptor name is read while unregister is still excluded. The malformed packet is still rejected with -ENOTSUPP. |
| CVE-2026-64450 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix out-of-bounds read in broadcast Gap ACK blocks A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its data area. tipc_get_gap_ack_blks() only verifies that the record's len field is self-consistent with its ugack_cnt/bgack_cnt counts (sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check that the record actually fits in the message data area, msg_data_sz(). The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen) break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the returned size, so tipc_link_advance_transmq() copies the record off the receive skb with an attacker-controlled count: this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt), GFP_ATOMIC); A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its data area is short, carrying a Gap ACK record with len = 0x400, bgack_cnt = 0xff and ugack_cnt = 0. len then equals struct_size(p, gacks, 255), so the consistency check passes and ga is non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out of the much smaller skb: BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60 Read of size 1024 at addr ffff0000c7030d38 by task poc864/69 Call trace: kmemdup_noprof+0x48/0x60 tipc_link_advance_transmq+0x86c/0xb80 tipc_link_bc_ack_rcv+0x19c/0x1e0 tipc_bcast_sync_rcv+0x1c4/0x2c4 tipc_rcv+0x85c/0x1340 tipc_l2_rcv_msg+0xac/0x104 The buggy address belongs to the object at ffff0000c7030d00 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 56 bytes inside of allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0) The copied-out bytes are subsequently consumed as gap/ack values, but the read is already out of bounds at the kmemdup() regardless of how they are used. The unicast STATE path drops such a message: "if (glen > dlen) break;" skips the rest of STATE_MSG handling and the skb is freed. Make the broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record against msg_data_sz() and, when it does not fit, reports it back through tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than processed. ga is not cleared on this path: ga == NULL already means "legacy peer without Selective ACK", a distinct legitimate state. |
| CVE-2026-64449 | In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: bound slave read/write to the kern_buf size The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy 'count' bytes into/out of the fixed-size kern_buf (size_buf == PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without bounding *ppos + count against size_buf. vme_user_write()/vme_user_read() only clamp count to the VME window size (image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the user-supplied slave.size -- validated against the VME address space (up to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window exceeds 128 KiB, a write()/read() copies past the kern_buf allocation. Clamp count against size_buf in both helpers, with an early return when *ppos is already at/after the buffer end. *ppos is >= 0 here (the caller rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors the existing clamp in the MASTER-path helpers resource_to_user() / resource_from_user(), and matches the read()/write() convention of a short transfer at end-of-buffer. Found by static analysis (CodeQL taint tracking + CBMC bounded model checking) and confirmed dynamically under KASAN with the vme_fake bridge: BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80 Write of size 262144 at addr ffff888004100000 by task trigger/68 _copy_from_user+0x2d/0x80 vme_user_write+0x13e/0x240 [vme_user] vfs_write+0x1b8/0x7a0 ksys_write+0xb8/0x150 |
| CVE-2026-64448 | In the Linux kernel, the following vulnerability has been resolved: smb: client: restrict implied bcc[0] exemption to responses without data area smb2_check_message() has a long-standing quirk that accepts a response whose calculated length is one byte larger than the bytes actually received ("server can return one byte more due to implied bcc[0]"). This was introduced to accommodate servers that omit the trailing bcc[0] overlap byte when no data area is present. However, the exemption is applied unconditionally, regardless of whether the command actually carries a data area (has_smb2_data_area[]). When a response with a data area is subject to the +1 exemption, the reported data can extend one byte beyond the bytes actually received, yet smb2_check_message() still accepts it. The subsequent decoder then reads past the end of the receive buffer. This is reachable during NEGOTIATE and SESSION_SETUP, before the session is established. The resulting out-of-bounds reads are visible under KASAN when mounting against a non-conforming server; both the SPNEGO/negTokenInit and the NTLMSSP challenge decoders are affected: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00 Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81 CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1 Call Trace: <TASK> dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 asn1_ber_decoder+0x16a7/0x1b00 decode_negTokenInit+0x19/0x30 SMB2_negotiate+0x31d9/0x4c90 cifs_negotiate_protocol+0x1f2/0x3f0 cifs_get_smb_ses+0x93f/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 85: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 0 bytes to the right of allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0) which belongs to the cache cifs_small_rq of size 448 BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50 Read of size 329 at addr ffff88800726c678 by task mount.cifs/89 CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1 Call Trace: <TASK> dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x36/0x50 decode_ntlmssp_challenge+0x457/0x680 SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0 SMB2_sess_setup+0x219/0x4f0 cifs_setup_session+0x248/0xaf0 cifs_get_smb_ses+0xf79/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 93: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 120 bytes inside of allocated 448-byte region [ffff88800726c600, ffff88800726c7c0) which belongs to the cache cifs_small_rq of size 448 Restrict the +1 exemption to responses that have no data area, so that it still covers the bcc[0] omission it was meant for. When a data area is present, the +1 discrepancy instead means the reported data length overruns the ---truncated--- |
| CVE-2026-64446 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. |
| CVE-2026-64445 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth() OnAuth() has two bugs in the shared-key authentication path. When the Privacy bit is set, rtw_wep_decrypt() is called without verifying that the frame is long enough to contain a valid WEP IV and ICV. Inside rtw_wep_decrypt(), length is computed as: length = len - WLAN_HDR_A3_LEN - iv_len and then passed as (length - 4) to crc32_le(). If len is less than WLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negative and, after the implicit cast to size_t, causes crc32_le() to read far beyond the frame buffer. Add a minimum length check before accessing the IV field and calling the decryption path. When processing a seq=3 response, rtw_get_ie() stores the Challenge Text IE length in ie_len, but the subsequent memcmp() always reads 128 bytes regardless of ie_len. IEEE 802.11 mandates a challenge text of exactly 128 bytes; reject any IE whose length field differs, matching the check already applied to OnAuthClient(). |
| CVE-2026-64444 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each iteration but only guards on i < pkt_len. When a malicious AP sends an AssocResponse whose last IE has only one byte remaining in the frame (the element_id byte lands at pkt_len-1), the loop reads pIE->length from pframe[pkt_len], which is one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond pkt_len, silently passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past pkt_len. |
| CVE-2026-64443 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop The IE parsing loop in update_beacon_info() advances by (pIE->length + 2) each iteration but only guards on i < len. When a malicious AP sends a Beacon whose last IE has only one byte remaining in the frame (the element_id byte lands at len-1), the loop reads pIE->length from one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond len, passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past len. Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->length for consistency with the sizeof(*pIE) guards added above. |
| CVE-2026-64442 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl() Two IE parsing loops are missing the header bounds checks before they dereference pIE->length: - issue_assocreq() walks pmlmeinfo->network.ies to build the association request. If the stored IE data ends with only an element_id byte and no length byte, pIE->length is read one byte past the end of the buffer. - join_cmd_hdl() walks pnetwork->ies during station join and has the same problem under the same conditions. Both buffers are filled from AP beacon and probe-response frames, so a malicious AP that sends a truncated final IE can trigger the issue. Apply the two-guard pattern established in update_beacon_info(): 1. Break if fewer than sizeof(*pIE) bytes remain. 2. Break if the IE's declared data extends past the buffer end. |
| CVE-2026-64441 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr() Three IE/attribute parsing functions have missing bounds checks. rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer without verifying that the header bytes (tag + length) are within the remaining buffer before reading them. Additionally, rtw_get_sec_ie() compares the 4-byte WPA OUI at cnt+2 without checking that at least 6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at cnt+6 without checking that at least 10 bytes remain. rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at entry, before verifying that wps_ielen is large enough to contain the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside the attribute loop, get_unaligned_be16() is called on attr_ptr and attr_ptr+2 without checking that 4 bytes remain in the buffer. Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie() and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum IE length requirement, add a wps_ielen < 6 early return in rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop. |
| CVE-2026-64440 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB write in HT_caps_handler() HT_caps_handler() iterates pIE->length bytes and writes into HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct HT_caps_element). Because pIE->length is a raw u8 from an over-the-air 802.11 AssocResponse frame and is never validated, a malicious AP can set it up to 255, causing up to 229 bytes of out-of-bounds writes into adjacent fields of struct mlme_ext_info. Truncate the iteration count to the size of HT_caps.u.HT_cap using umin() so that data from a longer-than-expected IE is silently ignored rather than written out of bounds, preserving interoperability with APs that pad the element. An early return on oversized IEs was considered but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1 assignment that precedes the loop, silently disabling HT mode for APs that append extra bytes to the HT Capabilities IE. |
| CVE-2026-64438 | In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix VF2PF work teardown race in adf_disable_sriov() The VF2PF interrupt handler queues PF-side response work that stores a raw pointer to per-VF state (struct adf_accel_vf_info). Currently, adf_disable_sriov() destroys per-VF mutexes and frees vf_info without stopping new VF2PF work or waiting for in-flight workers to complete. A concurrently scheduled or already queued worker can then dereference freed memory. This manifests as a use-after-free when KASAN is enabled: BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0 Write of size 8 at addr 0000000000000260 by task kworker/24:2/... Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat] Call Trace: kasan_report+0x119/0x140 mutex_lock+0x76/0xe0 adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat] adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat] adf_iov_send_resp+0x8c/0xe0 [intel_qat] process_one_work+0x6ac/0xfd0 worker_thread+0x4dd/0xd30 kthread+0x326/0x410 ret_from_fork+0x33b/0x670 Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker processing, and interrupt re-enabling during teardown. Set this flag atomically with the hardware interrupt mask inside adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE cluster MSI-X interrupt and flush the PF response workqueue before tearing down per-VF locks and state so all in-flight work completes before vf_info is destroyed. Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and unmask all VF2PF interrupts under the same lock when SR-IOV is re-enabled. This ensures the software flag and hardware state transition atomically on both the enable and disable paths. |
| CVE-2026-64436 | In the Linux kernel, the following vulnerability has been resolved: net: af_key: initialize alg_key_len for IPComp states pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by allocating x->calg and copying only the algorithm name: x->calg = kmalloc_obj(*x->calg); if (!x->calg) { err = -ENOMEM; goto out; } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt; Unlike the authentication (x->aalg) and encryption (x->ealg) branches of the same function, the compression branch never initializes calg->alg_key_len. IPComp carries no key and the allocation only reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field is left containing uninitialized slab data. calg->alg_key_len is later used as a length by xfrm_algo_clone() when an IPComp state is cloned during XFRM_MSG_MIGRATE: xfrm_state_migrate() xfrm_state_clone_and_setup() x->calg = xfrm_algo_clone(orig->calg); kmemdup(orig, xfrm_alg_len(orig)); where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With a non-zero garbage alg_key_len, kmemdup() reads past the end of the 68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating it triggers (net-next, KASAN, init_on_alloc=0): BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60 Read of size 4164 at addr ff11000025a74980 by task diag2/9287 CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1 Call Trace: <TASK> dump_stack_lvl+0x10e/0x1f0 print_report+0xf7/0x600 kasan_report+0xe4/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x44/0x60 xfrm_state_migrate+0x70a/0x1da0 xfrm_migrate+0x753/0x18a0 xfrm_do_migrate+0xb47/0xf10 xfrm_user_rcv_msg+0x411/0xb50 netlink_rcv_skb+0x158/0x420 xfrm_netlink_rcv+0x71/0x90 netlink_unicast+0x584/0x850 netlink_sendmsg+0x8b0/0xdc0 ____sys_sendmsg+0x9f7/0xb90 ___sys_sendmsg+0x134/0x1d0 __sys_sendmsg+0x16d/0x220 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 9287: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 pfkey_add+0x2652/0x2ea0 pfkey_process+0x6d0/0x830 pfkey_sendmsg+0x42c/0x850 __sys_sendto+0x461/0x4b0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ff11000025a74980 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of allocated 68-byte region [ff11000025a74980, ff11000025a749c4) Depending on the uninitialized value the same field can instead request an oversized kmemdup() allocation and make the migration clone fail. The XFRM netlink path is not affected: verify_one_alg() rejects an XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via XFRM_MSG_NEWSA is always self-consistent. Initialize calg->alg_key_len to 0, matching the aalg/ealg branches. |
| CVE-2026-64435 | In the Linux kernel, the following vulnerability has been resolved: audit: Fix data races of skb_queue_len() readers on audit_queue Multiple readers access audit_queue.qlen via skb_queue_len() without holding the queue lock or using READ_ONCE(), while kauditd writes to this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE() protected by a spinlock. This constitutes data races. All affected skb_queue_len(&audit_queue) call sites: - kauditd_thread() wait_event_freezable() condition - audit_receive_msg() AUDIT_GET handler (s.backlog assignment) - audit_receive() backlog check - audit_log_start() backlog check and pr_warn() KCSAN reports the following conflicting access pattern (one example): ================================================================== BUG: KCSAN: data-race in audit_log_start / skb_dequeue write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57: skb_dequeue+0x70/0xf0 kauditd_send_queue+0x71/0x220 kauditd_thread+0x1cb/0x430 kthread+0x1c2/0x210 ret_from_fork+0x162/0x1a0 ret_from_fork_asm+0x1a/0x30 read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1: audit_log_start+0x2a0/0x6b0 audit_core_dumps+0x64/0xa0 do_coredump+0x14b/0x1260 get_signal+0xeb2/0xf70 arch_do_signal_or_restart+0x41/0x170 exit_to_user_mode_loop+0xa2/0x1c0 do_syscall_64+0x1a3/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0xe0 value changed: 0x00000001 -> 0x00000000 ================================================================== Resolve the race by switching to lockless helper skb_queue_len_lockless(), which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE() write accesses already present on the writer side. [PM: line length tweak] |
| CVE-2026-64433 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete add_device_complete() runs from the hci_cmd_sync_work kworker, which holds only hci_req_sync_lock and *not* hci_dev_lock. It calls hci_conn_params_lookup() and then dereferences the returned object (params->flags) without taking hci_dev_lock: params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr, le_addr_type(cp->addr.type)); ... device_flags_changed(NULL, hdev, &cp->addr.bdaddr, cp->addr.type, hdev->conn_flags, params ? params->flags : 0); hci_conn_params_lookup() walks hdev->le_conn_params and is documented to require hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE (remove_device()), which does run under hci_dev_lock, can call hci_conn_params_free() to list_del() and kfree() the very object the lookup returned, so the subsequent params->flags read touches freed memory [0]. Hold hci_dev_lock() across the hci_conn_params_lookup() and the read of params->flags (and the matching event emission) so the lookup result cannot be freed by a concurrent remove_device() before it is used, honouring the locking contract of hci_conn_params_lookup(). [0]: (trailing page/memory-state dump trimmed) BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388 CPU: 1 UID: 0 PID: 388 Comm: kworker/u9:8 Not tainted 7.0.11 #20 PREEMPT Hardware name: linux,dummy-virt (DT) Workqueue: hci0 hci_cmd_sync_work Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xb4/0xd4 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x118/0x5d8 mm/kasan/report.c:482 kasan_report+0xb0/0xf4 mm/kasan/report.c:595 __asan_report_load1_noabort+0x20/0x2c mm/kasan/report_generic.c:378 add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 hci_cmd_sync_work+0x14c/0x240 net/bluetooth/hci_sync.c:334 process_one_work+0x628/0xd38 kernel/workqueue.c:3289 process_scheduled_works kernel/workqueue.c:3372 [inline] worker_thread+0x7a8/0xac0 kernel/workqueue.c:3453 kthread+0x39c/0x444 kernel/kthread.c:436 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Allocated by task 3401: kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57 kasan_save_track+0x20/0x3c mm/kasan/common.c:78 kasan_save_alloc_info+0x40/0x54 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xd4/0xd8 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x1b0/0x458 mm/slub.c:5385 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] hci_conn_params_add+0x10c/0x4b0 net/bluetooth/hci_core.c:2279 hci_conn_params_set net/bluetooth/mgmt.c:5162 [inline] add_device+0x5b4/0xa54 net/bluetooth/mgmt.c:7755 hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline] hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe0/0x128 net/socket.c:742 sock_write_iter+0x250/0x390 net/socket.c:1195 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x66c/0xab0 fs/read_write.c:688 ksys_write+0x1fc/0x24c fs/read_write.c:740 __do_sys_write fs/read_write.c:751 [inline] __se_sys_write fs/read_write.c:748 [inline] __arm64_sys_write+0x70/0xa4 fs/read_write.c:748 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151 el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724 el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596 Freed by task 3740: kasan_save_stack+0x3c/0x64 ---truncated--- |
| CVE-2026-64432 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate Dirty Page Table capacity in log_replay copy_lcns In the analysis pass of $LogFile journal replay, log_replay() copies LCNs from each action log record into an existing Dirty Page Table (DPT) entry without bounding the destination index. A crafted NTFS image with DPT entry lcns_follow=1 and an action log record with lcns_follow=2 produces a kernel slab out-of-bounds write at mount time: BUG: KASAN: slab-out-of-bounds in log_replay+0x654c/0xdb60 Write of size 8 at addr ffff8880095e1040 by task mount Two attacker-controlled fields can drive j+i past the allocated page_lcns[] array: 1. dp->lcns_follow (capacity) can be smaller than lrh->lcns_follow. 2. lrh->target_vcn may be smaller than dp->vcn, making the u64 subtraction wrap to a huge size_t. Validate target VCN delta and per-record LCN count against the DPT entry capacity, bail via the existing out: cleanup label with -EINVAL. This mirrors the bounds-check pattern added in commit b2bc7c44ed17 ("fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot") and commit 0ca0485e4b2e ("fs/ntfs3: validate rec->used in journal-replay file record check"). |
| CVE-2026-64430 | In the Linux kernel, the following vulnerability has been resolved: NTB: epf: Avoid calling pci_irq_vector() from hardirq context ntb_epf_vec_isr() calls pci_irq_vector() in hardirq context to derive the vector number. pci_irq_vector() calls msi_get_virq() that takes a mutex and can therefore trigger "scheduling while atomic" splats: BUG: scheduling while atomic: kworker/u33:0/55/0x00010001 ... Call trace: ... schedule+0x38/0x110 schedule_preempt_disabled+0x28/0x50 __mutex_lock.constprop.0+0x848/0x908 __mutex_lock_slowpath+0x18/0x30 mutex_lock+0x4c/0x60 msi_domain_get_virq+0xe8/0x138 pci_irq_vector+0x2c/0x60 ntb_epf_vec_isr+0x28/0x120 [ntb_hw_epf] __handle_irq_event_percpu+0x70/0x3a8 handle_irq_event+0x48/0x100 handle_edge_irq+0x100/0x1c8 ... Cache the Linux IRQ number for vector 0 when vectors are allocated and use it as a base in the ISR. Running the ISR in a threaded IRQ handler would also avoid the problem, but that would be unnecessary here. |
| CVE-2026-64429 | In the Linux kernel, the following vulnerability has been resolved: gpio: eic-sprd: use raw_spinlock_t in the irq startup path sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller state through sprd_eic_update(), which takes sprd_eic->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep BUG: sleeping function called from invalid context hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv] sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv] sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv] sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv] __setup_irq.constprop.0+0xd/0x30 [vuln_msv] Convert the Spreadtrum EIC controller lock to raw_spinlock_t. The locked section only serializes MMIO register updates and does not contain sleepable operations, so keeping it non-sleeping is appropriate for the irqchip callbacks. |
| CVE-2026-64428 | In the Linux kernel, the following vulnerability has been resolved: gpio: sch: use raw_spinlock_t in the irq startup path sch_irq_unmask() enables the GPIO IRQ and then updates the controller state through sch_irq_mask_unmask(), which takes sch->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() -> sch_irq_unmask() -> sch_irq_mask_unmask() carrier and used the original spin_lock_irqsave(&sch->lock) edge. Lockdep reported: BUG: sleeping function called from invalid context hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv] sch_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv] sch_irq_mask_unmask.constprop.0+0x31/0x70 [vuln_msv] __setup_irq.constprop.0+0xd/0x30 [vuln_msv] Convert the SCH controller lock to raw_spinlock_t. The same lock is also used by the GPIO direction and value callbacks, but those critical sections only update MMIO-backed GPIO registers and do not contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. |
| CVE-2026-64425 | In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop") fixed the obvious case where io_worker_handle_work() took one exit-bit snapshot before draining pending work, but the fix stops one level too early. io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work run loop, yet it still snapshots that bit once before processing a whole dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT after the first linked item has started, the remaining linked items can still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue running after exit has begun. Move the check further inside, so it covers linked items too. Note: this is a syzbot special as it loves setting up tons of slow linked work on weird devices like msr that take forever to read, and immediately close the ring. Exit then takes a long time. |
| CVE-2026-64424 | In the Linux kernel, the following vulnerability has been resolved: netpoll: fix a use-after-free on shutdown path There is a use-after-free error on netpoll, which is clearly detected by KASAN. BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80 Read of size 1 at addr ... by task kworker/9:1 Workqueue: events queue_process Call Trace: skb_dequeue+0x1e/0xb0 queue_process+0x2c/0x600 process_scheduled_works+0x4b6/0x850 worker_thread+0x414/0x5a0 Allocated by task 242: __netpoll_setup+0x201/0x4a0 netpoll_setup+0x249/0x550 enabled_store+0x32f/0x380 Freed by task 0: kfree+0x1b7/0x540 rcu_core+0x3f8/0x7a0 The problem happens when there is a pending TX worker running in parallel with the cleanup path. This is what happens on netpoll shutdown path: 1) __netpoll_cleanup() is called 2) set dev->npinfo to NULL 3) call_rcu() with rcu_cleanup_netpoll_info() 3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with cancel_delayed_work(), but doesn't wait for the worker to finish 4) and kfree(npinfo); Because 3.1) doesn't really cancel the work, as the comment says "we can't call cancel_delayed_work_sync here, as we are in softirq", the TX worker can run after 4). Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through the work item via container_of(). Use disable_delayed_work_sync() to ensure the worker is completely stopped and prevent any future re-arming attempts. Once npinfo is set to NULL, senders will bail out and not queue new work. The disable flag ensures any in-flight re-arming attempts also fail silently. In the future, we can do the cleanup inline here without needing the npinfo->rcu rcu_head, but that is net-next material. |
| CVE-2026-64423 | In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: remove multicast group from hash table on device destruction When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through the multicast list and calls ip_ma_put() on each membership, scheduling them for RCU reclamation. However, they are not unlinked from the device's multicast hash table (mc_hash). Since the device remains published in dev->ip_ptr until after ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash can still locate and access the multicast group after its refcount is decremented. If the RCU callback runs and frees the group while a reader is accessing it, a use-after-free occurs. Fix this by unlinking the multicast group from mc_hash using ip_mc_hash_remove() before scheduling it for reclamation. BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0 Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276 Call Trace: <IRQ> dump_stack_lvl+0x67/0x90 print_report+0x175/0x7c0 kasan_report+0x147/0x180 ip_check_mc_rcu+0x149/0x3f0 udp_v4_early_demux+0x36d/0x12d0 ip_rcv_finish_core+0xb8b/0x1390 ip_rcv_finish+0x54/0x120 NF_HOOK+0x213/0x2b0 __netif_receive_skb+0x126/0x340 process_backlog+0x4f2/0xf00 __napi_poll+0x92/0x2c0 net_rx_action+0x583/0xc60 handle_softirqs+0x236/0x7f0 do_softirq+0x57/0x80 </IRQ> Allocated by task 2239: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x72/0x90 ____ip_mc_inc_group+0x31a/0xa40 __ip_mc_join_group+0x334/0x3f0 do_ip_setsockopt+0x16fa/0x2010 ip_setsockopt+0x3f/0x90 do_sock_setsockopt+0x1ad/0x300 Freed by task 0: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x40/0x50 __kasan_slab_free+0x3a/0x60 __rcu_free_sheaf_prepare+0xd4/0x220 rcu_free_sheaf+0x36/0x190 rcu_core+0x8d9/0x12f0 handle_softirqs+0x236/0x7f0 |
| CVE-2026-64422 | In the Linux kernel, the following vulnerability has been resolved: net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP socket state. The sysctl is stored as an `int` but copied into the `u32` `tp->reordering` field for new sockets, so negative writes wrap to large values. With `tcp_mtu_probing=2`, the wrapped value can overflow the `tcp_mtu_probe()` size calculation and drive the MTU probing path into an out-of-bounds read. Route `tcp_reordering` writes through `proc_dointvec_minmax()` and require it to be at least 1. Also require `tcp_max_reordering` to be at least 1 so the configured maximum cannot become negative either. When registering the table for a non-init network namespace, relocate `extra2` pointers that refer into `init_net.ipv4` so the `tcp_reordering` upper bound follows that namespace's `tcp_max_reordering`. Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`. This keeps the send queue and window checks from being bypassed through signed integer overflow. |
| CVE-2026-64421 | In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix use-after-free on remove KASAN reports a slab-use-after-free in __media_entity_remove_link() during rmmod of imx8_isi: BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650 Read of size 2 at addr ffff0000d47cb02a by task rmmod/724 Call trace: __media_entity_remove_link+0x608/0x650 __media_entity_remove_links+0x78/0x144 __media_device_unregister_entity+0x150/0x280 media_device_unregister_entity+0x48/0x68 v4l2_device_unregister_subdev+0x158/0x300 v4l2_async_unbind_subdev_one+0x22c/0x358 v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0 v4l2_async_nf_unregister+0x5c/0x14c mxc_isi_remove+0x124/0x2a0 [imx8_isi] Allocated by task 249: __kmalloc_noprof+0x27c/0x690 mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi] Freed by task 724: kfree+0x1e4/0x5b0 mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi] mxc_isi_remove+0x11c/0x2a0 [imx8_isi] The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup() before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the media entity pads, but the subsequent v4l2 cleanup still tries to remove media links that reference those pads. Fix this by calling mxc_isi_v4l2_cleanup() before mxc_isi_crossbar_cleanup() to ensure all media entities are properly unregistered while the pads are still valid. |
| CVE-2026-64420 | In the Linux kernel, the following vulnerability has been resolved: mfd: cros_ec: Delay dev_set_drvdata() until probe success If ec_device_probe() fails, cros_ec_class_release releases memory for the cros_ec_dev structure. However, because the drvdata was already set, sub-drivers like cros_ec_typec can still retrieve the stale pointer via the platform device. This leads to a use-after-free when cros_ec_typec attempts to access &typec->ec->ec->dev on a device that has already been released. Move dev_set_drvdata() to ensure that the pointer is only made available once all initialization steps have succeeded. sysfs: cannot create duplicate filename '/class/chromeos/cros_ec' Call trace: sysfs_do_create_link_sd+0x94/0xdc sysfs_create_link+0x30/0x44 device_add_class_symlinks+0x90/0x13c device_add+0xf0/0x50c ec_device_probe+0x150/0x4f0 platform_probe+0xa0/0xe0 ... BUG: KASAN: invalid-access in __memcpy+0x44/0x230 Write at addr f5ffff809e2d33ac by task kworker/u32:5/125 Pointer tag: [f5], memory tag: [fe] Tainted : [W]=WARN, [O]=OOT_MODULE Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3 Workqueue: events_unbound deferred_probe_work_func Call trace: __memcpy+0x44/0x230 cros_ec_check_features+0x60/0xcc [cros_ec_proto] cros_typec_probe+0xe8/0x6e0 [cros_ec_typec] platform_probe+0xa0/0xe0 |
| CVE-2026-64419 | In the Linux kernel, the following vulnerability has been resolved: mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show() Reading the debugfs "count" file of a memcg-aware shrinker can sleep inside an RCU read-side critical section: BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421 RCU nest depth: 1, expected: 0 css_rstat_flush mem_cgroup_flush_stats zswap_shrinker_count shrinker_debugfs_count_show shrinker_debugfs_count_show() invokes the ->count_objects() callback under rcu_read_lock(). The zswap callback flushes memcg stats via css_rstat_flush(), which may sleep, so it must not run under RCU. The RCU lock is not needed here. mem_cgroup_iter() takes RCU internally and returns a memcg holding a css reference (dropped on the next iteration or by mem_cgroup_iter_break()), so the memcg stays alive without it. The shrinker is kept alive by the open debugfs file: shrinker_free() removes the debugfs entries via debugfs_remove_recursive(), which waits for in-flight readers to drain, before call_rcu(..., shrinker_free_rcu_cb). The sibling "scan" handler already invokes the sleeping ->scan_objects() callback with no RCU section. Drop the rcu_read_lock()/rcu_read_unlock(). |
| CVE-2026-64418 | In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix shrinker_info teardown race with expansion expand_shrinker_info() iterates all visible memcgs under shrinker_mutex, including memcgs that have not finished ->css_online() yet. Once pn->shrinker_info has been published, teardown must stay serialized with expand_shrinker_info() until that memcg is either fully online or no longer visible to iteration. Today alloc_shrinker_info() breaks that rule by dropping shrinker_mutex before freeing a partially initialized shrinker_info array, which may cause the following race: CPU0 CPU1 ==== ==== css_create --> list_add_tail_rcu(&css->sibling, &parent_css->children); online_css --> mem_cgroup_css_online --> alloc_shrinker_info --> alloc node0 info rcu_assign_pointer(C->node0->shrinker_info, old0) alloc node1 info -> FAIL -> goto err mutex_unlock(shrinker_mutex) shrinker_alloc() --> shrinker_memcg_alloc --> mutex_lock(shrinker_mutex) expand_shrinker_info --> mem_cgroup_iter see the memcg expand_one_shrinker_info --> old0 = C->node0->shrinker_info memcpy(new->unit, old0->unit, ...); free_shrinker_info --> kvfree(old0); /* double free !! */ kvfree_rcu(old0, rcu); The same problem exists later in mem_cgroup_css_online(). If alloc_shrinker_info() succeeds but a subsequent objcg allocation fails, the free_objcg -> free_shrinker_info() unwind path tears down the already published pn->shrinker_info arrays without shrinker_mutex. The expand_one_shrinker_info() can race with that teardown in the same way, leading to use-after-free or double-free of the old shrinker_info. Fix this by serializing shrinker_info teardown with shrinker_mutex, and by keeping alloc_shrinker_info() error cleanup inside the locked section. |
| CVE-2026-64417 | In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix NULL pointer dereference in debugfs shrinker_debugfs_add() creates both "count" and "scan" debugfs files unconditionally. That assumes every shrinker implements both count_objects() and scan_objects(), which is not guaranteed. For example, the xen-backend shrinker sets count_objects() but leaves scan_objects() NULL, so writing to its scan file calls through a NULL function pointer and panics the kernel: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. Call Trace: <TASK> shrinker_debugfs_scan_write+0x12e/0x270 full_proxy_write+0x5f/0x90 vfs_write+0xde/0x420 ? filp_flush+0x75/0x90 ? filp_close+0x1d/0x30 ? do_dup2+0xb8/0x120 ksys_write+0x68/0xf0 ? filp_flush+0x75/0x90 do_syscall_64+0xb3/0x5b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The count path has the same issue in principle if a shrinker omits count_objects(). To fix it, only create "count" and "scan" debugfs files when the corresponding callbacks are present. |
| CVE-2026-64413 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: zero chainstack array sashiko reports: looking at ebtables table translation, could a sparse cpu_possible_mask lead to an uninitialized pointer free? If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible, but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at CPU 2, the cleanup loop will blindly decrement and call vfree() on newinfo->chainstack[1]. Not a real-world bug, such allocation isn't expected to fail in the first place. |
| CVE-2026-64412 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: module names must be null-terminated We need to explicitly check the length, else we may pass non-null terminated string to request_module(). |
| CVE-2026-64411 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: terminate table name before find_table_lock() update_counters() and compat_update_counters() forward a user-supplied 32-byte table name to find_table_lock() without NUL-terminating it. On a lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s", "ebtable_", name), and vsnprintf() reads past the name field and the stack object until it hits a zero byte. BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730) Read of size 1 at addr ffff8880119dfb20 by task exploit/147 Call Trace: ... string (lib/vsprintf.c:648 lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) __request_module (kernel/module/kmod.c:150) do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380) update_counters (net/bridge/netfilter/ebtables.c:1440) do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573) nf_setsockopt (net/netfilter/nf_sockopt.c:101) ip_setsockopt (net/ipv4/ip_sockglue.c:1424) raw_setsockopt (net/ipv4/raw.c:847) __sys_setsockopt (net/socket.c:2393) ... compat_do_replace() shares the same unterminated name via compat_copy_ebt_replace_from_user(); terminate it there too so all find_table_lock() callers behave alike. The other callers already terminate the name after the copy. |
| CVE-2026-64409 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: fix infinite loop in btmtksdio_txrx_work() Every once in a while we see a hung btmtksdio_flush() task: INFO: task kworker/u17:0:189 blocked for more than 122 seconds. __cancel_work_timer+0x3f4/0x460 cancel_work_sync+0x1c/0x2c btmtksdio_flush+0x2c/0x40 hci_dev_open_sync+0x10c4/0x2190 [..] It all boils down to incorrect time_is_before_jiffies() usage in btmtksdio_txrx_work(). The btmtksdio_txrx_work() loop is expected to be terminated if running for longer than 5*HZ. However the timeout check is twisted: time_is_before_jiffies(old_jiffies + 5*HZ) evaluates to true when old_jiffies + 5*HZ is in the past i.e. when a timeout has occurred. Using OR with time_is_before_jiffies(txrx_timeout) means that: - before the 5-second timeout: the condition is `int_status || false`, so it loops as long as there are pending interrupts. - after the 5-second timeout: the condition becomes `int_status || true`, which is always true. When the loop becomes infinite btmtksdio_txrx_work() loop never terminates and never releases the SDIO host. Fix loop termination condition to actually enforce a 5*HZ timeout. |
| CVE-2026-64408 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: pin L2CAP connection during netdev registration bnep_add_connection() reads the L2CAP connection without holding the channel lock, then passes its HCI device to register_netdev(). Controller teardown can clear and release that connection concurrently, leaving the network device registration path to dereference a freed parent device. Take a reference to the L2CAP connection while holding the channel lock. Retain it until register_netdev() has taken the parent device reference. |
| CVE-2026-64407 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3() During the v3 firmware download the controller sends a v3_data_req with a 32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower bound of the offset and then sends firmware from that offset. nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction; serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data + nxpdev->fw_dnld_v3_offset, len); Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size, so a controller that asks for an offset or length past the firmware image makes the driver read past the end of nxpdev->fw->data and send that memory back over UART. nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent check to the v3 path, reject the request when it falls outside the firmware image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at free_skb stays consistent. |
| CVE-2026-64406 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in bt_accept_dequeue() bt_accept_get() takes a temporary reference before dropping the accept queue lock. bt_accept_dequeue() currently drops that reference before bt_accept_unlink(), leaving only the queue reference. bt_accept_unlink() drops the queue reference. The subsequent sock_hold() therefore accesses freed memory if it was the final reference, as observed by KASAN during listening L2CAP socket cleanup. Retain the temporary queue-walk reference through unlink and hand it to the caller on success. Drop it explicitly on the closed and not-yet-connected paths. |
| CVE-2026-64405 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn() hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection was pending, but hdev->sent_cmd can be NULL while req_status is still HCI_REQ_PEND, leading to a NULL pointer dereference and a general protection fault from the hci_rx_work() receive path. Instead of inspecting hdev->sent_cmd, track the in-flight create connection command with a new per-connection HCI_CONN_CREATE flag and route all cancellation through hci_cancel_connect_sync(), which dispatches to a dedicated per-type cancel function. The create command is in exactly one of two states: still queued, or in flight. The cancel function holds cmd_sync_work_lock across the whole decision: the worker takes this lock to dequeue every entry, so while it is held a queued command cannot start running and an in-flight command cannot complete and let the next command become pending. This keeps the flag test and hci_cmd_sync_cancel() atomic with respect to the worker, so a queued command is simply dequeued, and an in-flight command owned by this connection is cancelled without the risk of cancelling an unrelated command that became pending in the meantime. CIS uses the same flag mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection. hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear HCI_CONN_CREATE after the create command completes, but the command status handler can free conn via hci_conn_del() (for example when the controller rejects the connection) while the worker is still blocked on the connection complete event. Hold a reference on conn across the create command so the flag can be cleared without a use-after-free. |
| CVE-2026-64404 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync() iso_conn_big_sync() drops the socket lock to call hci_get_route() and then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards without re-checking that conn is still valid. While the lock is dropped, the connection can be torn down under the same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del() sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the lock and reads conn->hcon, conn may be NULL, causing a NULL pointer dereference (hcon is the first member of struct iso_conn). This path is reached from iso_sock_recvmsg() for a PA-sync broadcast sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock window can race with connection teardown driven by controller events. Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket lock and bail out if the connection went away, as already done in the sibling iso_sock_rebind_bc(). |
| CVE-2026-64403 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate option length before reading conf opt value l2cap_get_conf_opt() derives the option length from the attacker-controlled opt->len field and immediately dereferences opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a raw pointer for the default case) before any caller has confirmed that opt->len bytes are present in the buffer. The callers (l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and l2cap_conf_rfc_get()) only detect a malformed option afterwards, once the running length has gone negative, by which point the out-of-bounds read has already executed. An existing post-hoc length check keeps the garbage value from being consumed, so this is not a data leak in the current control flow. It is still a validate-after-use ordering bug: up to 4 bytes are read past the end of the buffer before it is known to contain them, and it is fragile to future changes in the callers. Fix it at the source. Pass the end of the buffer into l2cap_get_conf_opt() and refuse to touch opt->val unless the full option (header + value) fits. Each caller computes an end pointer once before the loop and checks the return value directly instead of inferring the error from a negative length. |
| CVE-2026-64402 | In the Linux kernel, the following vulnerability has been resolved: coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer() When the SMB sink is used as a perf AUX sink, smb_update_buffer() calls smb_sync_perf_buffer() to copy hardware trace data into the perf AUX ring buffer pages. It derives pg_idx = head >> PAGE_SHIFT from @head, which is handle->head, and indexes dst_pages[pg_idx]. The pg_idx %= nr_pages normalization is only applied after the first loop iteration. This leaves the initial page index underived from the buffer size, which can result in an out-of-bounds write past dst_pages[] when head exceeds the AUX buffer size. Normalize head modulo the AUX buffer size before deriving the page index and offset, mirroring tmc_etr_sync_perf_buffer(). |
| CVE-2026-64401 | In the Linux kernel, the following vulnerability has been resolved: smb: client: resolve SWN tcon from live registrations cifs_swn_notify() looks up a witness registration by id under cifs_swnreg_idr_mutex, drops the mutex, and then uses the registration's cached tcon pointer. That pointer is not a lifetime reference, and it is not a stable representative once cifs_get_swn_reg() lets multiple tcons for the same net/share name share one registration id. A same-share second mount can keep the cifs_swn_reg alive after the first tcon unregisters and is freed. The registration then still points at the freed first tcon, so taking tc_lock or incrementing tc_count through swnreg->tcon only moves the use-after-free earlier. Taking tc_lock while holding cifs_swnreg_idr_mutex also violates the documented CIFS lock order. Fix this by making the registration store only the stable witness identity: id, net name, share name, and notify flags. When a notify arrives, copy that identity under cifs_swnreg_idr_mutex, drop the mutex, then find and pin a live witness tcon that currently matches the net/share pair under the normal cifs_tcp_ses_lock -> tc_lock order. The notification path uses that pinned tcon directly and drops the reference when done. Registration and unregister messages now use the live tcon passed by the caller instead of a cached tcon in the registration. The final unregister send is folded into cifs_swn_unregister() while the registration is still protected by cifs_swnreg_idr_mutex. This removes the previous find/drop/reacquire raw-pointer window. The release path only removes the idr entry and frees the stable identity strings. This preserves the intended one-registration/many-tcon behavior: a registration id represents a net/share pair, and notify handling acts on a live representative selected at use time. It also preserves CLIENT_MOVE ordering for the representative tcon because the old-IP unregister is sent before cifs_swn_register() sends the new-IP register. |
| CVE-2026-64399 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: add permission checks for FSCTL_DUPLICATE_EXTENTS_TO_FILE The FSCTL_DUPLICATE_EXTENTS_TO_FILE arm of smb2_ioctl() overwrites the destination file's data via vfs_clone_file_range() with neither the share-level KSMBD_TREE_CONN_FLAG_WRITABLE check nor a per-handle fp->daccess check that the other write-bearing arms carry. A client can overwrite destination data on a read-only share, or from a handle opened with only FILE_WRITE_ATTRIBUTES (which still yields an FMODE_WRITE filp). FILE_WRITE_ATTRIBUTES-only destination handle overwrote the file's data via the clone. Add both checks, matching the FSCTL_SET_SPARSE permission fix; require FILE_WRITE_DATA since this writes data. |
| CVE-2026-64398 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: add a permission check for FSCTL_SET_ZERO_DATA FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only the missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 with KASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handle zeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to (6/6; a FILE_READ_DATA-only handle was correctly denied). This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE"). Because SET_ZERO_DATA writes data (not an attribute), require FILE_WRITE_DATA. |
| CVE-2026-64397 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize QUERY_DIRECTORY requests per file smb2_query_dir() stores a pointer to its stack-allocated private data in the ksmbd_file readdir_data. Concurrent QUERY_DIRECTORY requests using the same file handle can overwrite this pointer while an iterate_dir() callback is still using it, resulting in a stack use-after-free. Add a per-file mutex and hold it while accessing the shared directory enumeration state. The lock covers scan restart, dot entry state, readdir_data setup and iteration, and response construction. This prevents another request from replacing readdir_data.private before the current request has finished using it and also serializes the shared file position. |
| CVE-2026-64396 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation When a blocking byte-range lock request is deferred in the FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into the connection's async_requests list via setup_async_work(). The cancel callback smb2_remove_blocked_lock() holds a reference to the flock. If the lock waiter is subsequently woken up but the work state is no longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the cleanup path calls locks_free_lock(flock) without dequeuing the work from the async_requests list. Concurrently, smb2_cancel() walks the list under conn->request_lock and invokes the cancel callback, which then dereferences the already freed 'flock'. This leads to a slab-use-after-free inside __wake_up_common. Fix this by restructuring the cleanup logic after the worker returns from ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) and release_async_work(work) to the top of the cleanup block. This guarantees that the async work is completely dequeued and serialized under conn->request_lock before locks_free_lock(flock) is called, rendering the flock unreachable for any concurrent smb2_cancel(). |
| CVE-2026-64395 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: require source read access for duplicate extents FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB access mask granted to the source handle. A handle opened with attribute access can consequently be used to copy file contents into an attacker-readable destination. Require FILE_READ_DATA on the source handle before either VFS operation, matching other ksmbd data-copy paths. |
| CVE-2026-64394 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE") added a fp->daccess gate to fsctl_set_sparse and noted that "similar handle-level checks exist in other functions but are missing here." The SMB2 SET_INFO SECURITY arm is one of the missing ones, and the most security-relevant: smb2_set_info_sec() calls set_info_sec() with no per-handle access check. set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: it rewrites owner/group/mode via notify_change(), rewrites the POSIX ACL via set_posix_acl(), and on KSMBD_SHARE_FLAG_ACL_XATTR shares removes and rewrites the Windows security descriptor via ksmbd_vfs_set_sd_xattr(). Every other persistent-mutation arm of the sibling handler smb2_set_info_file() checks fp->daccess first (FILE_WRITE_DATA / FILE_DELETE / FILE_WRITE_EA / FILE_WRITE_ATTRIBUTES); the SECURITY arm — which mutates the access control itself — is the only one with no gate. A client can therefore open a handle with FILE_WRITE_ATTRIBUTES only (no FILE_WRITE_DAC / FILE_WRITE_OWNER) and use SMB2_SET_INFO with InfoType SMB2_O_INFO_SECURITY to rewrite the file's DACL and owner, granting itself access the handle's daccess never carried. Unlike the FSCTL data arms this is a metadata/xattr operation, so there is no FMODE_WRITE VFS backstop — the missing fp->daccess check is the entire gate. Setting a security descriptor is the WRITE_DAC / WRITE_OWNER operation, so require at least one of those on the handle before re-permissioning the file. -EACCES is mapped to STATUS_ACCESS_DENIED by smb2_set_info(). |
| CVE-2026-64393 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: run set info with opener credentials SMB2 SET_INFO handlers call path-based VFS helpers after checking the access mask granted to the SMB handle. Those helpers perform their owner, inode permission and LSM checks using the current ksmbd worker credentials. Run the complete SET_INFO dispatch with the credentials captured when the handle was opened. This also removes the separate security information credential setup and keeps all SET_INFO classes under one credential scope. Direct override_creds() is used because it can nest with the request credential overrides already used by rename and link helpers. |
| CVE-2026-64392 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for delete-on-close Delete-on-close can be completed by deferred or durable handle teardown, where no request work is available. Both the base-file unlink and the ADS xattr removal consequently run with the ksmbd worker credentials and can bypass filesystem permission checks. Run both operations with the credentials captured in struct file when the handle was opened. This preserves the authenticated user's fsuid, fsgid, supplementary groups and capability restrictions at final close. |
| CVE-2026-64391 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for ADS I/O Alternate data streams are stored as xattrs. Unlike regular file I/O, their read and write paths therefore call VFS xattr helpers which recheck inode permissions and LSM policy using the current task credentials. Run ADS I/O with the credentials captured when the SMB handle was opened. |
| CVE-2026-64390 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: track the connection owning a byte-range lock SMB2_LOCK adds each granted byte-range lock to both the file lock list and the lock list of the connection which handled the request. The final close and durable handle paths, however, remove the connection list entry while holding fp->conn->llist_lock. With SMB3 multichannel, the connection handling the LOCK request can be different from the connection which opened the file. The entry can therefore be removed under a different spinlock from the one protecting the list it belongs to. A concurrent traversal can then access freed struct ksmbd_lock and struct file_lock objects. Record the connection owning each lock's clist entry and hold a reference to it while the entry is linked. Use that connection and its llist_lock for unlock, rollback, close, and durable preserve. Durable reconnect assigns the new connection as the owner when publishing the locks again. |
| CVE-2026-64387 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix query directory replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_query_directory_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. |
| CVE-2026-64386 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix query_info() replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_query_info_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. |
| CVE-2026-64385 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_ioctl() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_ioctl_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. |
| CVE-2026-64384 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix change notify replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_notify_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. |
| CVE-2026-64383 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_flush() replay SMB2_flush() keeps its response buffer bookkeeping across replay attempts. If a replayable flush response is received and the retry then fails before cifs_send_recv() stores a replacement response, flush_exit will free the stale response pointer a second time. Reinitialize resp_buftype and rsp_iov at the top of the replay loop so cleanup only acts on response state produced by the current attempt. This fixes a double-free without changing replay handling for successful requests. |
| CVE-2026-64382 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_open() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_open_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. |
| CVE-2026-64381 | In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix next buffer leak in receive_encrypted_standard() receive_encrypted_standard() allocates next_buffer before checking whether the number of compound PDUs already reached MAX_COMPOUND. If the limit check fails, the function returns immediately and the newly allocated next_buffer is not assigned to server->smallbuf/server->bigbuf, making it leaked. Move the MAX_COMPOUND check before allocating next_buffer. |
| CVE-2026-64380 | In the Linux kernel, the following vulnerability has been resolved: smb: client: harden POSIX SID length parsing posix_info_sid_size() reads sid[1] to obtain the subauthority count, but its existing boundary check still accepts buffers with only one remaining byte. Require two bytes before reading sid[1] so all client paths that reuse the helper reject truncated POSIX SIDs safely. |
| CVE-2026-64379 | In the Linux kernel, the following vulnerability has been resolved: smb: client: mask server-provided mode to 07777 in modefromsid When modefromsid is active, parse_dacl() applies the server-provided sub_auth[2] value from the NFS mode SID to cf_mode without masking to 07777. Apply the correct masking, same as in the read path. |
| CVE-2026-64378 | In the Linux kernel, the following vulnerability has been resolved: writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs() When a container exits, the following BUG_ON() is occasionally triggered: ================================================================== VFS: Busy inodes after unmount of sdb (ext4) ------------[ cut here ]------------ kernel BUG at fs/super.c:695! CPU: 3 PID: 6 Comm: containerd-shim Tainted: G OE K 6.6 #1 pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : generic_shutdown_super+0xf0/0x100 lr : generic_shutdown_super+0xf0/0x100 Call trace: generic_shutdown_super+0xf0/0x100 kill_block_super+0x20/0x48 ext4_kill_sb+0x28/0x60 deactivate_locked_super+0x54/0x130 deactivate_super+0x84/0xa0 cleanup_mnt+0xa4/0x140 __cleanup_mnt+0x18/0x28 task_work_run+0x78/0xe0 do_notify_resume+0x204/0x240 ================================================================== The root cause is a race between cgroup_writeback_umount() and inode_switch_wbs()/cleanup_offline_cgwb(). There is a window between inode_prepare_wbs_switch() returning true and the subsequent wb_queue_isw() call. Following is the process that triggers the issue: CPU A (umount) | CPU B (writeback) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ inode_switch_wbs/cleanup_offline_cgwb atomic_inc(&isw_nr_in_flight) inode_prepare_wbs_switch -> passes SB_ACTIVE check __iget(inode) generic_shutdown_super sb->s_flags &= ~SB_ACTIVE cgroup_writeback_umount(sb) smp_mb() atomic_read(&isw_nr_in_flight) rcu_barrier() -> no pending RCU callbacks flush_workqueue(isw_wq) -> nothing queued, returns evict_inodes(sb) -> Inode skipped as isw still holds a ref. sop->put_super(sb) /* destroys percpu counters */ -> VFS: Busy inodes after unmount! wb_queue_isw() queue_work(isw_wq, ...) /* later in work function */ inode_switch_wbs_work_fn process_inode_switch_wbs iput() -> evict percpu_counter_dec() // UAF! Fix this by extending the RCU read-side critical section in inode_switch_wbs() and cleanup_offline_cgwb() to cover from inode_prepare_wbs_switch() through wb_queue_isw(). Since there is no sleep in this window, rcu_read_lock() can be used. Then add a synchronize_rcu() in cgroup_writeback_umount() before the existing rcu_barrier(), so that all in-flight switchers that have passed the SB_ACTIVE check have completed queue_work() before flush_workqueue() is called. The existing rcu_barrier() is intentionally retained so this fix can be backported unchanged to stable kernels (5.10.y, 6.6.y, ...) that still queue switches via queue_rcu_work(). It is a no-op on current mainline (since commit e1b849cfa6b6 ("writeback: Avoid contention on wb->list_lock when switching inodes")) and is removed in a follow-up patch. |
| CVE-2026-64377 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-cpufreq-hw: Fix possible double free qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to one element of this array in policy->driver_data. qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data. This is not valid because the memory is devm-managed. For the first domain, this can free the devm-managed allocation while the devres entry is still active, leading to a possible double free when the platform device is later detached. For other domains, the pointer may refer to an element inside the array rather than the allocation base. Remove the kfree(data) call and let devres release qcom_cpufreq.data. This issue was found by a static analysis tool I am developing. |
| CVE-2026-64376 | In the Linux kernel, the following vulnerability has been resolved: firmware_loader: fix device reference leak in firmware_upload_register() firmware_upload_register() -> fw_create_instance() -> device_initialize() After fw_create_instance() succeeds, the lifetime of the embedded struct device is expected to be managed through the device core reference counting, since fw_create_instance() has already called device_initialize(). In firmware_upload_register(), if alloc_lookup_fw_priv() fails after fw_create_instance() succeeds, the code reaches free_fw_sysfs and frees fw_sysfs directly instead of releasing the device reference with put_device(). This may leave the reference count of the embedded struct device unbalanced, resulting in a refcount leak. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fix this by using put_device(fw_dev) in the failure path and letting fw_dev_release() handle the final cleanup, instead of freeing the instance directly from the error path. |
| CVE-2026-64375 | In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (FD links) proc_pid_get_link() and proc_pid_readlink() currently look up the task from the pid once, then do the ptrace access check on that task, then look up the task from the pid a second time to do the actual access. That's racy in several ways. To fix it, pass the task to the ->proc_get_link() handler, and instead of proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that looks up and locks the task, does the access check, and calls ->proc_get_link(). |
| CVE-2026-64374 | In the Linux kernel, the following vulnerability has been resolved: sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run due to a higher priority RT task currently running on their CPU. The CPU that is about to schedule a lower priority task will grab the rq lock of the overloaded CPU and move the RT task from that CPU's runqueue to the local one and schedule the higher priority RT task. This caused issues when a lot of CPUs would schedule a lower priority task at the same time. They would all try to grab the same runqueue lock of the CPU with the overloaded RT tasks. Only the first CPU that got in will get that task. All the others would wait until they got the runqueue lock and see there's nothing to pull and do nothing. On systems with lots of CPUs, this caused a large latency (up to 500us) which is beyond what PREEMPT_RT is to allow. The solution to that was to create an RT_PUSH_IPI logic. When any CPU wanted to pull a task, instead of grabbing the runqueue lock of the overloaded CPU, it would start by sending an IPI to the overloaded CPU, and that IPI handler would have the CPU with the waiting RT task do a push instead. Then that handler would send an IPI to the next CPU with overloaded RT tasks, and so on. Note, after the first CPU starts this process, if another CPU wanted to do a pull, it would see that the process has already begun and would only increment a counter to have the IPIs continue again. The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded context on PREEMPT_RT but they can run in an interrupt context in non-RT. If an IPI lands on a CPU that has just woken up multiple RT tasks and the current CPU is running a non RT or a low priority RT task, instead of doing a push, it would simply do a schedule on that CPU. But if a softirq was also executing on this CPU, the schedule would need to wait until the softirq finished. Until then, the CPU would still be considered overloaded as there are RT tasks still waiting to run on it. A live lock occurred on a workload that was doing heavy networking traffic on a large machine where the softirqs would run 500us out of 750us. And it would also be waking up RT tasks, causing the RT pull logic to be constantly executed. When a softirq triggered on a CPU with RT tasks queued but not running yet, and the other CPUs would see this CPU as being overloaded, they would send an IPI over to it. The CPU would notice that the waiting RT tasks are of higher priority than the currently running task and simply schedule that CPU instead. But because the softirq was executing, before it could schedule, it would receive another IPI to do the same. The amount of IPIs would slow down the currently running softirq so much that before it could return back to task context, it would execute another softirq never allowing the CPU to schedule. This live locked that CPU. As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if PREEMPT_RT is not enabled. |
| CVE-2026-64373 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: Fix hotplug-suspend race during reboot During system reboot, cpufreq_suspend() is called via the kernel_restart() -> device_shutdown() path. Unlike the normal system suspend path, the reboot path does not call freeze_processes(), so userspace processes and kernel threads remain active. This allows CPU hotplug operations to run concurrently with cpufreq_suspend(). The original code has no synchronization with CPU hotplug, leading to a race condition where governor_data can be freed by the hotplug path while cpufreq_suspend() is still accessing it, resulting in a null pointer dereference: Unable to handle kernel NULL pointer dereference Call Trace: do_kernel_fault+0x28/0x3c cpufreq_suspend+0xdc/0x160 device_shutdown+0x18/0x200 kernel_restart+0x40/0x80 arm64_sys_reboot+0x1b0/0x200 Fix this by adding cpus_read_lock()/cpus_read_unlock() to cpufreq_suspend() to block CPU hotplug operations while suspend is in progress. [ rjw: Changelog edits ] |
| CVE-2026-64372 | In the Linux kernel, the following vulnerability has been resolved: cpufreq: pcc: fix use-after-free and double free in _OSC evaluation pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the two-phase _OSC negotiation. Between the two calls it freed output.pointer but left output.length unchanged. Since acpi_evaluate_object() treats a non-zero length with a non-NULL pointer as an existing buffer to write into, the second call wrote into freed memory (use-after-free). The subsequent kfree(output.pointer) at out_free then freed the same pointer a second time (double free). Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER after freeing the first result, so ACPICA allocates a fresh buffer for each phase independently. |
| CVE-2026-64371 | In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (part 1) Fix the easy cases where procfs currently calls ptrace_may_access() without exec_update_lock protection, where the fix is to simply add the extra lock or use mm_access(): - do_task_stat(): grab exec_update_lock - proc_pid_wchan(): grab exec_update_lock - proc_map_files_lookup(): use mm_access() instead of get_task_mm() - proc_map_files_readdir(): use mm_access() instead of get_task_mm() - proc_ns_get_link(): grab exec_update_lock - proc_ns_readlink(): grab exec_update_lock |
| CVE-2026-64370 | In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference via get_pid() and stores it in timer.it.cpu.pid. If the subsequent posix_cpu_timer_set() call fails, the function returns immediately without calling posix_cpu_timer_del() to release the pid reference, causing a leak. Fix it by calling posix_cpu_timer_del() before the unlock-and-return on the error path, consistent with the other exit paths in the same function. |
| CVE-2026-64369 | In the Linux kernel, the following vulnerability has been resolved: s390: Revert support for DCACHE_WORD_ACCESS load_unaligned_zeropad() reads eight bytes from unaligned addresses and may cross page boundaries. It handles exceptions which may happen if reading from the second page results in an exception. For pages which are donated to the Ultravisor for secure execution purposes the do_secure_storage_access() exception handler however does not handle such exceptions correctly. Such an exception may result in an endless exception loop which will never be resolved. An attempt to fix this [1] turned out to be not sufficient. For now revert load_unaligned_zeropad() until this problem has been resolved in a proper way. Note that the implementation of load_unaligned_zeropad() itself is correct. The revert is just a temporary workaround until there is complete fix for secure storage access exceptions. [1] commit b00be77302d7 ("s390/mm: Add missing secure storage access fixups for donated memory") |
| CVE-2026-64368 | In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not limit zeroing to orig_size when only red zoning is enabled When init (zeroing) on allocation is requested, for kmalloc() we generally have to zero the full object size even if a smaller size is requested, in order to provide krealloc()'s __GFP_ZERO guarantees. But if we track the requested size, krealloc() uses that information to do the right thing, so we can zero only the requested size. With red zoning also enabled, any extra size became part of the red zone, so it must not be zeroed and thus we must zero only the requested size. However the current check is imprecise, and will trigger also when only SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking the requested size). This means enabling red zoning alone can compromise krealloc()'s __GFP_ZERO contract. Fix this by using slub_debug_orig_size() instead, which is the exact check for whether the requested size is tracked. We don't need to care if red zoning is also enabled or not. Also update and expand the comment accordingly. |
| CVE-2026-64365 | In the Linux kernel, the following vulnerability has been resolved: HID: letsketch: fix UAF on inrange_timer at driver unbind letsketch_driver does not provide a .remove callback, but letsketch_probe() arms a per-device timer: timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0); The timer is re-armed from letsketch_raw_event() with a 100 ms timeout on every pen-in-range report, and its callback dereferences data->input_tablet to deliver a synthetic BTN_TOOL_PEN release. letsketch_data is allocated with devm_kzalloc(), and its input_dev fields are devm-allocated via letsketch_setup_input_tablet(). On device unbind (USB unplug or rmmod), the HID core runs its default teardown and devm cleanup frees both letsketch_data and the input devices. Because no .remove callback exists, nothing drains the timer first: if raw_event armed it within ~100 ms of the unbind, the pending timer fires on freed memory. This is a UAF read of data and of data->input_tablet, followed by input_report_key() / input_sync() into the freed input_dev. The same problem can occur on the probe error path: if hid_hw_start() enabled I/O on an always-poll-quirk device and then failed, raw_event may have armed the timer before devm releases data. Fix by adding a .remove callback that calls hid_hw_stop() first. hid_hw_stop() synchronously kills the URBs that deliver raw_event(), so once it returns no path can re-arm the timer. timer_shutdown_sync() then drains any in-flight callback and permanently disables further mod_timer() calls. Apply the same timer_shutdown_sync() in the probe error path so the timer is guaranteed not to outlive data. |
| CVE-2026-64364 | In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix out-of-bounds bit access on mt_io_flags mt_io_flags is a single unsigned long, but mt_process_slot(), mt_release_pending_palms() and mt_release_contacts() use it as a per-slot bitmap indexed by the slot number. That slot number is only bounded by td->maxcontacts, which is taken from the device's ContactCountMaximum feature report and can be up to 255, not by BITS_PER_LONG. As a result, a multitouch device that advertises a large contact count makes set_bit()/clear_bit() operate past the mt_io_flags word and corrupt the adjacent members of struct mt_device. The sticky-fingers release timer is the easiest way to reach this. mt_release_contacts() runs for (i = 0; i < mt->num_slots; i++) clear_bit(i, &td->mt_io_flags); with num_slots == maxcontacts. For maxcontacts around 250 the loop clears the bits that overlap td->applications.next, zeroing that list head, and the list_for_each_entry() that immediately follows then dereferences NULL. The kernel panics from timer (softirq) context. On a KASAN build this shows up as a general protection fault in mt_release_contacts() with a null-ptr-deref at offset 0x58, which is offsetof(struct mt_application, num_received). The state is reachable from an untrusted USB or Bluetooth HID multitouch device; no local privileges are required. Store the per-slot active state in a separately allocated bitmap sized for maxcontacts, the same pattern already used for pending_palm_slots, and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two "mt_io_flags & MT_IO_SLOTS_MASK" arming checks become bitmap_empty(td->active_slots, td->maxcontacts). Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the same commit to leave the low byte for the slot bits; with the slot bits gone it fits in bit 0 again, which also keeps it within the unsigned long on 32-bit. |
| CVE-2026-64363 | In the Linux kernel, the following vulnerability has been resolved: HID: appleir: fix UAF on pending key_up_timer in remove() appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open. key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it. A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereference appleir->input_dev. Introduce a 'removing' flag on struct appleir, gated by the existing spinlock. appleir_remove() sets the flag under the lock and then shuts down the timer with timer_shutdown_sync(), which both drains any in-flight callback and permanently disables further mod_timer() calls. appleir_raw_event() and key_up_tick() bail out early if the flag is set, so no path can arm or run the timer, or dereference appleir->input_dev, after remove() has started tearing down. The keyrepeat and flatbattery branches of appleir_raw_event() previously called into the input layer without holding the spinlock; take it now so the flag check is well-defined. This incidentally closes a pre-existing read-side race on appleir->current_key in the keyrepeat branch. This bug is structurally a sibling of commit 4db2af929279 ("HID: appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been present since the driver was introduced. |
| CVE-2026-64362 | In the Linux kernel, the following vulnerability has been resolved: HID: lg-g15: cancel pending work on remove to fix a use-after-free lg_g15_data is allocated with devm and holds a work item. The report handlers schedule that work straight from device input. lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key, and lg_g510_leds_event() does it too. The worker dereferences the lg_g15_data back through container_of. The driver had no remove callback and never cancelled the work. So if a report scheduled the work and the keyboard was then unplugged, devres freed lg_g15_data while the work was still pending or running, and the worker touched freed memory. This is a use-after-free. It is reachable as a race on device unplug. Add a remove callback that cancels the work before devres frees the state. g15->work is only initialized for the models that schedule it (G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the cancel on g15->work.func to avoid cancelling a work that was never set up. The g15 NULL test mirrors the one already in lg_g15_raw_event(). |
| CVE-2026-64361 | In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length check_and_correct_requested_length() compares (off + len) against node_size using u32 arithmetic. When the caller passes a large len value (e.g. from an underflowed subtraction in hfs_brec_remove()), off + len can wrap past 2^32 and produce a small result, causing the bounds check to pass when it should fail. For example, with off=14 and len=0xFFFFFFF2 (underflowed from data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6, which is less than a typical node_size of 512, so the check passes and the subsequent memmove reads ~4GB past the node buffer. Fix this by widening the addition to u64 before comparing against node_size. This prevents the u32 wrap while keeping the logic straightforward. |
| CVE-2026-64360 | In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: zero-initialize buffer in hfs_bnode_read hfs_bnode_read() can return early without writing to the output buffer when is_bnode_offset_valid() fails or when check_and_correct_requested_ length() corrects the length to zero. Callers such as hfs_bnode_read_ u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the result unconditionally, leading to KMSAN uninit-value reports. Rather than initializing at each individual call site, zero the buffer at the start of hfs_bnode_read() before any validation checks. This ensures all callers in both hfs and hfsplus get a deterministic zero value regardless of which early-return path is taken. |
| CVE-2026-64359 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers Syzbot reported a hung task in nilfs_transaction_begin() where multiple tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds waiting to acquire ns_segctor_sem for read: INFO: task syz.0.17:5918 blocked for more than 143 seconds. Call Trace: schedule+0x164/0x360 rwsem_down_read_slowpath+0x6d9/0x940 down_read+0x99/0x2e0 nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221 nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921 notify_change+0xc1a/0xf40 chmod_common+0x273/0x4a0 do_fchmodat+0x12d/0x230 The writer holding ns_segctor_sem was a concurrent NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting per-element warnings from nilfs_sufile_updatev(): __nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78 nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186 nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline] nilfs_free_segments fs/nilfs2/segment.c:1140 [inline] nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline] nilfs_segctor_do_construct+0x1f55/0x76c0 nilfs_clean_segments+0x3bd/0xa50 nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline] nilfs_ioctl+0x261f/0x2780 The root cause is that user-supplied segment numbers are not validated before nilfs_clean_segments() begins doing work; the range check on each segnum is performed deep inside the call chain by nilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entry while still holding the segctor lock and the sufile mi_sem. Under load (repeated invocations across multiple mounts saturating the global printk path), the cumulative printk latency keeps ns_segctor_sem held long enough to trip the hung_task watchdog, blocking concurrent operations such as chmod() that need ns_segctor_sem for read. Fix by validating the contents of kbufs[4] in nilfs_clean_segments() immediately after acquiring ns_segctor_sem via nilfs_transaction_lock(). Holding ns_segctor_sem serializes the check against nilfs_ioctl_resize(), which can modify ns_nsegments, so the validation uses a consistent value. Out-of-range segment numbers are rejected with -EINVAL before any segment-cleaning work begins, so the bad entries never reach the per-element diagnostic path inside nilfs_sufile_updatev(). |
| CVE-2026-64358 | In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: cancel workqueue on release for supported platforms only Since a recent fix the mtk_jpeg_release function cancels any pending or running work present in the driver workqueue using cancel_work_sync function. Currently, only the multicore based variants use this workqueue and they have the jpeg_worker platform data field initialized with a workqueue callback function. For the others, this field value remain NULL by default. The cancel_work_sync function is unconditionally called in mtk_jpeg_release function, even for the variants that do not use the workqueue. This call generates a WARN_ON print in __flush_work because the workqueue callback function presence check fails in __flush_work function (used by cancel_work_sync). So, to avoid these warnings, call cancel_work_sync only if a workqueue callback is defined in platform data. |
| CVE-2026-64355 | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject fragmented frames in devmap Devmap broadcast redirects clone the packet for all but the last destination. For native XDP, that clone path copies only the linear xdp_frame data, while fragmented frames keep skb_shared_info in tailroom outside the linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but without valid frag metadata, and the later free path can interpret uninitialized tail data as skb_shared_info, leading to an out-of-bounds access during frame return. Reject fragmented native XDP frames in dev_map_enqueue_clone(). Add the same restriction to the generic XDP clone path in dev_map_redirect_clone(). Generic XDP represents fragmented packets as nonlinear skbs, and rejecting them here keeps clone-based broadcast support aligned between native and generic XDP. |
| CVE-2026-64352 | In the Linux kernel, the following vulnerability has been resolved: bpf: Allow LPM map access from sleepable BPF programs trie_lookup_elem() annotates its rcu_dereference_check() walks with only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c) resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and classic RCU readers but fails for sleepable BPF programs, which enter via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace(). trie_update_elem() and trie_delete_elem() have the same problem in a different form: they walk the trie with plain rcu_dereference(), which asserts rcu_read_lock_held() unconditionally. Both are reachable from sleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elem helpers, and from the syscall path under classic rcu_read_lock(). In the writer paths the trie is actually protected by trie->lock (an rqspinlock taken across the walk); we never relied on the RCU read-side lock to keep nodes alive there. A sleepable LSM hook that ends up touching an LPM trie therefore triggers lockdep on debug kernels: ============================= WARNING: suspicious RCU usage 7.1.0-... Tainted: G E ----------------------------- kernel/bpf/lpm_trie.c:249 suspicious rcu_dereference_check() usage! 1 lock held by net_tests/540: #0: (rcu_tasks_trace_srcu_struct){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x26/0x280 Call Trace: dump_stack_lvl lockdep_rcu_suspicious trie_lookup_elem bpf_prog_..._enforce_security_socket_connect bpf_trampoline_... security_socket_connect __sys_connect do_syscall_64 This is lockdep-only -- no UAF, since Tasks Trace RCU does serialize against the trie's reclaim path -- but it spams the console once per distinct callsite on every debug kernel running a sleepable BPF LSM that touches an LPM trie, which is increasingly common. For the lookup path, switch the rcu_dereference_check() annotation from rcu_read_lock_bh_held() to bpf_rcu_lock_held(), which accepts all three contexts (classic, BH, Tasks Trace). Other map types already follow this convention. For trie_update_elem() and trie_delete_elem(), annotate the walks as rcu_dereference_protected(*p, 1) -- matching trie_free() in the same file -- since trie->lock is held across the walk. rqspinlock has no lockdep_map, so the predicate degenerates to '1' rather than lockdep_is_held(&trie->lock); the protection is real but not machine-verifiable. trie_get_next_key() also uses bare rcu_dereference() but is reachable only from the BPF syscall, which holds classic rcu_read_lock() before dispatching, so it is left untouched. |
| CVE-2026-64351 | In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration. |
| CVE-2026-64350 | In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info() cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream mapping update fails, the error path frees the allocated stream rings and stream_rings array, but leaves stream_ctx_array allocated. Free the stream context array before falling through to the stream_rings cleanup path. |
| CVE-2026-64348 | In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an EHCI host controller with a USB isochronous device to test with, no runtime testing was able to be performed. |
| CVE-2026-64347 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job. |
| CVE-2026-64346 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: Fix use-after-free in gadget_match_driver The udc structure acts as the management structure for the gadget, but their lifecycles are decoupled. A race condition exists where usb_del_gadget() frees the udc memory (e.g., via mode-switch work) while gadget_match_driver() concurrently accesses the freed udc memory (e.g., via configfs), causing a Use-After-Free (UAF) that triggers a NULL pointer dereference when the freed memory is zeroed: [39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140 [39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60 ... [39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8 [39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140 [39430.931308][ T1171] configfs_write_iter+0xec/0x134 [39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode [39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c [39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664 Fix this by ensuring the udc structure remains allocated until the gadget is released. To achieve this, introduce a new usb_gadget_release() routine to the core. When the gadget is added, usb_add_gadget() stores the gadget's release routine in the udc structure and takes a reference to the udc. When the gadget is released, usb_gadget_release() drops the reference to the udc and then calls the gadget's release routine. |
| CVE-2026-64345 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_printer: take kref only for successful open printer_open() returns -EBUSY when the character device is already open, but it increments dev->kref regardless of the return value. VFS does not call ->release() for a failed open, so every rejected second open permanently leaks one reference. Move kref_get() into the successful-open branch. |
| CVE-2026-64344 | In the Linux kernel, the following vulnerability has been resolved: USB: idmouse: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") |
| CVE-2026-64343 | In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") |
| CVE-2026-64342 | In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler. |
| CVE-2026-64341 | In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") |
| CVE-2026-64340 | In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") |
| CVE-2026-64338 | In the Linux kernel, the following vulnerability has been resolved: USB: misc: uss720: unregister parport on probe failure uss720_probe() registers a parport before reading the 1284 register used to detect unsupported Belkin F5U002 adapters. If get_1284_register() fails, the error path drops the driver private data and the USB device reference, but leaves the parport device registered. Leaving the port registered is more than a private allocation leak: parport_register_port() has already reserved a parport number and registered the parport bus device, while pp->private_data still points at the private data that the common error path is about to release. Undo the pre-announce registration in the get_1284_register() failure branch before jumping to the common private-data cleanup path. Clear priv->pp first, matching the disconnect path and avoiding a stale pointer in the private data. This issue was identified during our ongoing static-analysis research while reviewing kernel code. |
| CVE-2026-64337 | In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: unmap request DMA on queue failure mtu3_gadget_queue() maps the request before checking whether the QMU GPD ring can accept another transfer. the request is returned with -EAGAIN before it is linked on the endpoint request list if mtu3_prepare_transfer() fails. Normal completion and dequeue paths unmap requests from mtu3_req_complete(), but this error path never reaches that helper, so the DMA mapping is left active. Unmap the request before returning from the failed queue path. |
| CVE-2026-64336 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended. |
| CVE-2026-64335 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port. |
| CVE-2026-64334 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver. |
| CVE-2026-64333 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix write buffer corruption The digi_write_inb_command() is supposed to wait for the write urb to become available or return an error, but instead it updates the transfer buffer and tries to resubmit the urb on timeout. To make things worse, for commands like break control where no timeout is used, the driver would corrupt the urb immediately due to a broken jiffies comparison (on 32-bit machines this takes five minutes of uptime to trigger due to INITIAL_JIFFIES). Fix this by adding the missing return on timeout and waiting indefinitely when no timeout has been specified as intended. This issue was (sort of) flagged by Sashiko when reviewing an unrelated change to the driver. |
| CVE-2026-64332 | In the Linux kernel, the following vulnerability has been resolved: USB: ulpi: fix memory leak on registration failure The allocated device name is never freed on early ULPI device registration failures. Fix this by initialising the device structure earlier and releasing the initial reference whenever registration fails. |
| CVE-2026-64331 | In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: fix NULL deref in vep_dequeue() vep_alloc_request() wasn't initializing vrequest->udc, so cancellations on the FunctionFS AIO path were arriving in vep_dequeue without a valid UDC reference. Since vrequest->udc is never actually properly used anywhere, we opt to remove it, and update vep_dequeue to obtain a reference to the udc with ep_to_vudc(), consistent with the other vep_ ops. AFAICT this bug has existed for ~10 years. Seems that nobody has really stressed the FunctionFS AIO path on usbip's vudc. I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints via AIO. Before the fix, running `usbip attach` from the host would cause the guest to oops with the following backtrace: Call trace: vep_dequeue+0x1c/0xe4 (P) usb_ep_dequeue+0x14/0x20 ffs_aio_cancel+0x24/0x34 __arm64_sys_io_cancel+0xb0/0x124 do_el0_svc+0x68/0x100 el0_svc+0x18/0x5c el0t_64_sync_handler+0x98/0xdc el0t_64_sync+0x154/0x158 |
| CVE-2026-64330 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Validate SVID index in svdm_consume_modes() In svdm_consume_modes(), the SVID value is read from pmdata->svids using pmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index]; If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data is embedded inside struct tcpm_port, indexing past svids reads into adjacent fields. In particular: - At index 16, it reads the altmodes count. - At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs. By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index to 20, the partner can force paltmode->svid to be loaded with an arbitrary, partner- chosen SVID, which is then registered via typec_partner_register_altmode(). Fix this by validating that pmdata->svid_index is non-negative and strictly less than pmdata->nsvids before accessing the pmdata->svids array inside svdm_consume_modes(). |
| CVE-2026-64329 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(), which on a connector-change event calls ucsi_connector_change() and schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees uc->ucsi (kfree) before free_irq() is called, so a handler invocation already in flight may access the freed object after ucsi_destroy(). CPU 0 (remove) | CPU 1 (threaded IRQ) ucsi_destroy(uc->ucsi) | ccg_irq_handler() kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE Move free_irq() before ucsi_destroy() in the remove path. It is kept after ucsi_unregister(): ucsi_unregister() cancels connector work whose handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(), which waits for a completion that is signalled from the IRQ handler, so the IRQ must stay active until that work has been cancelled. The probe error path already orders free_irq() before ucsi_destroy(). This bug was found by static analysis. |
| CVE-2026-64326 | In the Linux kernel, the following vulnerability has been resolved: block: skip sync_blockdev() on surprise removal in bdev_mark_dead() bdev_mark_dead()'s @surprise == true means the device is already gone. The filesystem callback fs_bdev_mark_dead() honours this and skips sync_filesystem(), but the bare block device path (no ->mark_dead op) lost its !surprise guard when the holder ->mark_dead callback was wired up (see Fixes), and now calls sync_blockdev() unconditionally, which can hang forever waiting on writeback that can no longer complete. syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path: nvme_mark_namespaces_dead() -> blk_mark_disk_dead() -> bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in folio_wait_writeback(), wedging the reset worker and every task waiting on it. Skip the sync on surprise removal, matching fs_bdev_mark_dead(); invalidate_bdev() still runs. Orderly removal (surprise == false) is unchanged. Found by FuzzNvme(Syzkaller with FEMU fuzzing framework). |
| CVE-2026-64324 | In the Linux kernel, the following vulnerability has been resolved: udf: validate free block extents against the partition length udf_free_blocks() checks the logical block number and count against the partition length, but drops the extent offset from that final bound. A crafted extent can pass the guard while logicalBlockNum + offset + count points past the partition, which later indexes past the space bitmap array. A single ftruncate(2) on a file backed by such an extent reliably panics the kernel. This is a local availability issue. On desktop systems where UDisks/polkit allows the active user to mount removable UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply the crafted filesystem and trigger the panic by truncating a writable file on it. Systems that require root or CAP_SYS_ADMIN to mount the image have a higher prerequisite. No confidentiality or integrity impact is claimed: the reproduced primitive is an out-of-bounds read of a bitmap pointer slot followed by a kernel panic. Use the already computed logicalBlockNum + offset + count value for the partition length check. Also make load_block_bitmap() reject an out-of-range block group before indexing s_block_bitmap[], so corrupted callers cannot walk past the flexible array. |
| CVE-2026-64323 | In the Linux kernel, the following vulnerability has been resolved: udf: validate VAT header length against the VAT inode size udf_load_vat() takes the virtual partition's start offset straight from the on-disk VAT 2.0 header without checking it against the VAT inode size: map->s_type_specific.s_virtual.s_start_offset = le16_to_cpu(vat20->lengthHeader); map->s_type_specific.s_virtual.s_num_entries = (sbi->s_vat_inode->i_size - map->s_type_specific.s_virtual.s_start_offset) >> 2; lengthHeader is a fully attacker-controlled 16-bit value. If it exceeds the VAT inode size, the s_num_entries subtraction underflows to a huge count, which defeats the "block > s_num_entries" bound in udf_get_pblock_virt15(); and on the ICB-inline path that function reads ((__le32 *)(iinfo->i_data + s_start_offset))[block] so a large s_start_offset indexes past the inode's in-ICB data. Mounting a crafted UDF image with a virtual (VAT) partition then triggers an out-of-bounds read. Reject a VAT whose header length does not leave room for at least one entry within the VAT inode. |
| CVE-2026-64322 | In the Linux kernel, the following vulnerability has been resolved: udf: validate sparing table length as an entry count, not a byte count udf_load_sparable_map() accepts a sparing table when sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksize is false, i.e. it treats reallocationTableLen as a number of BYTES that must fit in the block. But the table is walked as an array of 8-byte sparingEntry elements: for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) { struct sparingEntry *entry = &st->mapEntry[i]; ... entry->origLocation ... } in udf_get_pblock_spar15() and udf_relocate_blocks(). A reallocationTableLen of N therefore passes the check whenever sizeof(*st) + N <= blocksize, yet the consumers index sizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x the block. On a crafted UDF image this is an out-of-bounds read in udf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds the same length to udf_update_tag(), whose crc_itu_t() reads far past the block, and its memmove() through st->mapEntry[] is an out-of-bounds write. Validate reallocationTableLen as the entry count it is, with struct_size(). |
| CVE-2026-64321 | In the Linux kernel, the following vulnerability has been resolved: nvme: target: rdma: fix ndev refcount leak on queue connect nvmet_rdma_queue_connect() calls nvmet_rdma_find_get_device() which acquires a reference on the returned ndev via kref_get(). On the path where the host queue backlog is exceeded and the function returns NVME_SC_CONNECT_CTRL_BUSY, reference of ndev is not released, leaking the kref. Fix this by adding a goto to the existing put_device label before the early return. |
| CVE-2026-64320 | In the Linux kernel, the following vulnerability has been resolved: nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page nvmet_execute_disc_get_log_page() validates only the dword alignment of the host-supplied Log Page Offset (lpo). The 64-bit offset is then added to a small kzalloc'd buffer that holds the discovery log page and the result is passed straight to nvmet_copy_to_sgl(), which memcpy()s data_len bytes out to the host with no source-side bound check: u64 offset = nvmet_get_log_page_offset(req->cmd); /* 64-bit host */ size_t data_len = nvmet_get_log_page_len(req->cmd); /* 32-bit host */ ... if (offset & 0x3) { ... } /* only check */ ... alloc_len = sizeof(*hdr) + entry_size * discovery_log_entries(req); buffer = kzalloc(alloc_len, GFP_KERNEL); ... status = nvmet_copy_to_sgl(req, 0, buffer + offset, data_len); The Discovery controller is unauthenticated -- nvmet_host_allowed() returns true unconditionally for the discovery subsystem -- so the call is reachable pre-authentication by any TCP/RDMA/FC peer that can reach the nvmet target. With a discovery log page of ~1 KiB, an attacker requesting up to 4 KiB starting at offset == alloc_len reads the next slab page out and gets its content returned over the fabric (an empirical run on a default nvmet-tcp loopback target leaked 81 canonical kernel pointers in one Get Log Page response). Pointing the offset at unmapped kernel memory faults the in-kernel memcpy and crashes (or panics, on panic_on_oops=1) the target host instead. The attacker-controlled source-side offset pattern "nvmet_copy_to_sgl(req, 0, buffer + ATTACKER_OFFSET, ...)" is unique to nvmet_execute_disc_get_log_page in the entire nvmet codebase: every other Get Log Page handler in admin-cmd.c either ignores lpo (and silently starts every response at offset 0) or tracks a local destination offset with a fixed source pointer. Validate the host-supplied offset against the log page size, cap the copy length to what is actually available, and zero-fill any remainder of the host transfer buffer. The zero-fill matches the existing short-response pattern in nvmet_execute_get_log_changed_ns() (admin-cmd.c) and prevents leaking transport SGL contents when the host asks for more bytes than the log page contains. |
| CVE-2026-64319 | In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: validate reply message payload bounds against transfer length nvmet_auth_reply() accesses the variable-length rval[] array using attacker-controlled hl (hash length) and dhvlen (DH value length) fields without verifying they fit within the allocated buffer of tl bytes. A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a small transfer length but large hl/dhvlen values, causing out-of-bounds heap reads when the target processes the DH public key (rval + 2*hl) or performs the host response memcmp. With DH authentication configured, the OOB pointer is passed directly to sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching up to 526 bytes past the buffer. This is exploitable pre-authentication. Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before any access to the variable-length fields. Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| CVE-2026-64318 | In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold. |
| CVE-2026-64317 | In the Linux kernel, the following vulnerability has been resolved: isofs: bound Rock Ridge symlink components to the SL record get_symlink_chunk() and the SL handling in parse_rock_ridge_inode_internal() walk the variable-length components of a Rock Ridge "SL" (symbolic link) record. Each component is a two-byte header (flags, len) followed by len bytes of text, so it occupies slp->len + 2 bytes. Both loops read slp->len and advance to the next component, and get_symlink_chunk() additionally does memcpy(rpnt, slp->text, slp->len), but neither checks that the component lies within the SL record before dereferencing it. A crafted SL record whose component declares a len that runs past the record (rr->len) therefore triggers an out-of-bounds read of up to 255 bytes. When the record sits at the tail of its backing buffer - for example a small kmalloc()ed continuation block reached through a CE record - the read crosses the allocation; get_symlink_chunk() then copies the out-of-bounds bytes into the symlink body returned to user space by readlink(), disclosing adjacent kernel memory. ISO 9660 images are routinely mounted from untrusted removable media - desktop environments auto-mount them (e.g. via udisks2) without CAP_SYS_ADMIN - so the record contents are attacker-controlled. Reject any component that does not fit in the remaining record bytes before using it. In get_symlink_chunk() return NULL, like the existing output-buffer (plimit) checks, so a malformed record makes readlink() fail with -EIO rather than silently returning a truncated target; in parse_rock_ridge_inode_internal() stop the inode-size walk. |
| CVE-2026-64316 | In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() and gen_split_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. |
| CVE-2026-64315 | In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. |
| CVE-2026-64313 | In the Linux kernel, the following vulnerability has been resolved: crypto: ecc - Fix carry overflow in vli multiplication The carry flag calculation fails when r01.m_high is saturated (0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows. The condition (r01.m_high < product.m_high) doesn't handle the case where r01.m_high == product.m_high and an additional carry exists from lower-bit overflow. When commit 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") introduced crypto/ecc.c, it split the muladd() function in the micro-ecc library into separate mul_64_64() and add_128_128() helpers. It seems the check got lost in translation. Add proper handling for this boundary by accounting for the carry from the lower addition. |
| CVE-2026-64312 | In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - restore callback for non-parallel fallback pcrypt installs pcrypt_aead_done() on the child AEAD request before trying to submit it through padata. If padata_do_parallel() returns -EBUSY, pcrypt falls back to calling the child AEAD directly. That fallback must not keep the padata completion callback. Otherwise an asynchronous completion runs pcrypt_aead_done() even though the request was never enrolled in padata. Restore the original request callback and callback data before calling the child AEAD directly. This keeps the fallback path aligned with a direct AEAD request while leaving the parallel path unchanged. |
| CVE-2026-64306 | In the Linux kernel, the following vulnerability has been resolved: crypto: drbg - Fix returning success on failure in CTR_DRBG drbg_ctr_generate() sometimes returns success when it fails, leaving the output buffer uninitialized. Fix it. |
| CVE-2026-64305 | In the Linux kernel, the following vulnerability has been resolved: crypto: qat - protect service table iterations with service_lock The service_table list is protected by service_lock when entries are added or removed (in adf_service_add() and adf_service_remove()), but several functions iterate over the list without holding this lock. A concurrent adf_service_register() or adf_service_unregister() call could modify the list during traversal, leading to list corruption or a use-after-free. Fix this by holding service_lock across all list_for_each_entry() iterations of service_table in adf_dev_init(), adf_dev_start(), adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(), adf_dev_restarted_notify(), and adf_error_notifier(). The lock ordering is safe: callers of the static helpers (adf_dev_up() and adf_dev_down()) acquire state_lock before service_lock, and no event_hld callback or service_lock holder ever acquires state_lock in the reverse order. |
| CVE-2026-64304 | In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate RSA CRT component lengths The generic RSA key parser (rsa_helper.c) bounds each CRT component (p, q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt() allocates half-size DMA buffers (key_sz / 2) and right-aligns each component with: memcpy(dst + half_key_sz - len, src, len) When a CRT component is larger than half_key_sz the subtraction underflows and memcpy writes past the DMA buffer, causing memory corruption. Add a len > half_key_sz check next to the existing !len check for each of the five CRT components so the driver falls back to the non-CRT path instead of writing out of bounds. |
| CVE-2026-64303 | In the Linux kernel, the following vulnerability has been resolved: spi: fsl-lpspi: terminate the RX channel on TX prepare failure path When dmaengine_prep_slave_sg() fails for the TX channel, the error path terminates the TX DMA channel but leaves the RX channel running. Since the RX channel was already submitted and issued prior to preparing the TX descriptor, returning -EINVAL causes the SPI core to unmap the DMA buffers while the RX DMA engine continues writing to them, leading to potential memory corruption or use-after-free. Terminate the RX channel before returning on the TX prepare failure path. |
| CVE-2026-64301 | In the Linux kernel, the following vulnerability has been resolved: regulator: scmi: fix of_node refcount leak in scmi_regulator_probe() scmi_regulator_probe() calls of_find_node_by_name() which takes a reference on the returned device node. On the error path where process_scmi_regulator_of_node() fails, the function returns without calling of_node_put() on the child node, leaking the reference. Add of_node_put(np) on the error path to properly release the reference. |
| CVE-2026-64299 | In the Linux kernel, the following vulnerability has been resolved: tracing: Prevent out-of-bounds read in glob matching String event fields are not necessarily NUL-terminated, so the filter predicate functions (filter_pred_string(), filter_pred_strloc() and filter_pred_strrelloc()) pass the field length to the regex match callbacks, and the length-aware matchers honour it. regex_match_glob() was the exception: it ignored the length and called glob_match(), which scans the string until it hits a NUL byte. Some string fields are not NUL-terminated. One example is the dynamic char array of the xfs_* namespace tracepoints, which is copied without a trailing NUL. For such a field, glob matching reads past the end of the event field, causing a KASAN slab-out-of-bounds read in glob_match(), reached via regex_match_glob() and filter_match_preds() from the xfs_lookup tracepoint. Add a length-bounded glob_match_len() and use it from regex_match_glob() so glob matching always stops at the field boundary. The matching loop is factored into a shared helper so glob_match() keeps its behaviour. |
| CVE-2026-64298 | In the Linux kernel, the following vulnerability has been resolved: NFSv4: include MAY_WRITE in open permission mask for O_TRUNC POSIX requires write permission to truncate a file, so an open() that specifies O_TRUNC must be authorized for write access regardless of the O_ACCMODE access mode. nfs_open_permission_mask() builds the access mask passed to nfs_may_open(), which is the local authorization gate for OPENs the client serves itself from a cached write delegation via the can_open_delegated() path in nfs4_try_open_cached(). The mask is derived from O_ACCMODE alone, so an open(O_RDONLY | O_TRUNC) against a file the caller cannot write requests only MAY_READ and passes the local check. The OPEN is then satisfied locally and the truncation is issued to the server as a SETATTR(size=0) over the delegation stateid, which the server accepts under standard write-delegation semantics. POSIX requires that this open fail with EACCES. Include MAY_WRITE in the mask whenever O_TRUNC is set so the local check matches the access the server would have enforced. |
| CVE-2026-64297 | In the Linux kernel, the following vulnerability has been resolved: module: decompress: check return value of module_extend_max_pages() module_extend_max_pages() calls kvrealloc() internally and returns -ENOMEM on allocation failure. The return value is never checked. If the initial allocation fails, info->pages remains NULL and info->max_pages remains 0. Subsequent calls to module_get_next_page() will attempt to dynamically grow the array by calling module_extend_max_pages(info, 0) since info->used_pages is 0. This results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel oops. Fix: add the missing error check after module_extend_max_pages() and return immediately on failure. This matches the pattern used by every other kvrealloc() caller in the module loading path. [Sami: Corrected the analysis in the commit message.] |
| CVE-2026-64296 | In the Linux kernel, the following vulnerability has been resolved: exfat: bound uniname advance in exfat_find_dir_entry() In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances the output pointer by a fixed amount while the loop guard only tracks the accumulated name length: if (++order == 2) uniname = p_uniname->name; else uniname += EXFAT_FILE_NAME_LEN; len = exfat_extract_uni_name(ep, entry_uniname); name_len += len; unichar = *(uniname+len); *(uniname+len) = 0x0; uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_len grows only by the actual extracted length, which is shorter when a name fragment contains an early NUL. The only guard is `name_len >= MAX_NAME_LENGTH`, so a crafted directory with many short name fragments lets uniname run far past the p_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small, causing an out-of-bounds read and write at *(uniname+len). The sibling extractor exfat_get_uniname_from_ext_entry() already stops on a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guard added in commit d42334578eba ("exfat: check if filename entries exceeds max filename length")); exfat_find_dir_entry() never got the equivalent. Track the per-entry write offset as a count and reject a fragment once the offset, or the offset plus the extracted length, would exceed MAX_NAME_LENGTH, before forming the output pointer. |
| CVE-2026-64294 | In the Linux kernel, the following vulnerability has been resolved: mm: do file ownership checks with the proper mount idmap Ever since idmapped mounts were introduced, inode ownership checks (for side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done against the nop_mnt_idmap, which completely ignores the file's mount's idmap. This results in odd edgecases like: 1) mount/bind-mount with an idmap userA:userB:1 2) userB runs an owner_or_capable() check on file that is owned by userA on-disk/in-memory, but owned by userB after idmap translation 3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied In the case of mincore/madvise MADV_PAGEOUT, this is usually benign, because file_permission(file, MAY_WRITE) will probably succeed, as it uses the proper idmap internally, but it does not need to be the case on e.g a 0444 file where even the owner itself doesn't have permissions to write to it. Since this is clearly not trivial to get right, introduce a file_owner_or_capable() that can carry the correct semantics, and switch the various users in mm to it. The issue was found by manual code inspection & an off-list discussion with Jan Kara. |
| CVE-2026-64289 | In the Linux kernel, the following vulnerability has been resolved: iommufd: Set upper bounds on cache invalidation entry_num and entry_len iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len, each bounded only by U32_MAX. An entry_len beyond the kernel's struct size makes the copy helper verify the extra bytes are zero, scanning that excess in one uninterruptible pass; a multi-gigabyte value over zeroed user memory trips the soft-lockup watchdog. A large entry_num is the other half, driving the backend invalidation loop with no reschedule. The VT-d nested handler, for one, copies each entry and flushes caches per iteration, pinning the CPU on a non-preemptible kernel. Cap both in the ioctl. entry_len is held under PAGE_SIZE, above any request struct, and entry_num under 1 << 19, the order of a hardware invalidation queue and well beyond any real batch, bounding the per-call loop length. |
| CVE-2026-64287 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU flush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPU on every run. The vGIC list register save and restore use used_lrs as their loop bound and expect it to stay within the number of implemented list registers. While this is generally the case, flush_hyp_vcpu() copies vgic_v3 verbatim and does not enforce this, so a value provided by the host is used at EL2 to index vgic_lr[] and access ICH_LR<n>_EL2 (host -> EL2). Fix by clamping used_lrs to the number of implemented list registers after the copy, as the trusted path already does in vgic_flush_lr_state(). The number of implemented list registers is constant after init, so it is replicated once from kvm_vgic_global_state.nr_lr into hyp_gicv3_nr_lr rather than read on every entry. |
| CVE-2026-64286 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPU flush_hyp_vcpu() copies the host vCPU context into the hyp's private vCPU on every run. ctxt_to_vcpu() expects a guest context to have a NULL __hyp_running_vcpu, which is only ever set on the host context, so that it resolves the vCPU via container_of(). While this is generally the case, flush_hyp_vcpu() copies the context verbatim and does not enforce this, so a value provided by the host is dereferenced at EL2 (host -> EL2). Fix by clearing __hyp_running_vcpu after the copy. |
| CVE-2026-64280 | In the Linux kernel, the following vulnerability has been resolved: fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() afu_ioctl_dma_map() accepts a 64-bit length from userspace via DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value is passed to afu_dma_pin_pages() where npages is derived as length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes int nr_pages, causing implicit truncation if length is very large. Validate map.length at the ioctl entry point before calling afu_dma_map_region(), rejecting values whose page count exceeds INT_MAX. |
| CVE-2026-64279 | In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter deregistration race Adapters can be looked up by their id using i2c_get_adapter() which takes a reference to the embedded struct device. Remove the adapter from the IDR before tearing it down during deregistration (and on registration failure) to make sure its resources are not accessed after having been freed (e.g. the device name). |
| CVE-2026-64277 | In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count rmi_f3a_initialize() takes the GPIO count from the device query register (f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127). rmi_f3a_map_gpios() then allocates gpio_key_map with min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f3a_attention() iterates the full gpio_count and dereferences gpio_key_map[i], and input->keycodemax is set to the full gpio_count while input->keycode points at the 6-entry allocation. A device that reports gpio_count > 6 therefore causes an out-of-bounds read of gpio_key_map[] on every attention interrupt, and out-of-bounds accesses through the input core's default keymap ioctls: EVIOCGKEYCODE reads past the buffer (leaking adjacent slab memory to user space) and EVIOCSKEYCODE writes a caller-controlled value past it, for any process able to open the evdev node, since input_default_getkeycode() and input_default_setkeycode() only bound the index against keycodemax. Size the keymap for the full gpio_count. The mapping loop is unchanged: it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END) entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills) and are skipped when reporting. |
| CVE-2026-64276 | In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count rmi_f30_map_gpios() allocates gpioled_key_map with min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f30_attention() iterates the full f30->gpioled_count (device query register, range 0..31) and dereferences gpioled_key_map[i], and input->keycodemax is set to the full gpioled_count while input->keycode points at the 6-entry allocation. A device that reports gpioled_count > 6 with GPIO support enabled therefore causes an out-of-bounds read on the attention interrupt and out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls, which bound the index only against keycodemax. This is the same defect as the F3A handler, which was copied from F30. Size the keymap for the full gpioled_count; the mapping loop still assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries. |
| CVE-2026-64275 | In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - prevent division by zero and arithmetic underflow The Elan I2C touchpad driver queries the device for its physical dimensions and trace counts to calculate the device resolution and width. However, if the device firmware or device tree provides invalid zero values for x_traces or y_traces, it results in a fatal division-by-zero exception leading to a kernel panic during device probe. Add checks to ensure these parameters are non-zero before performing the division. If invalid trace values are detected, fall back to a safe default of 1. Additionally, prevent an arithmetic underflow in the touch reporting logic. Previously, if the calculated or fallback width was smaller than ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a massive unsigned integer being reported to userspace. Clamp the adjusted width to a minimum of 0 to safely handle small physical dimensions and fallback scenarios. Completing the probe with safe fallback values ensures the sysfs nodes are created, keeping the firmware update path intact so a recovery firmware can be flashed to the device. |
| CVE-2026-64274 | In the Linux kernel, the following vulnerability has been resolved: Input: goodix - clamp the device-reported contact count goodix_ts_read_input_report() copies the number of touch points reported by the device into an on-stack buffer u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only runtime check bounds the per-interrupt count against ts->max_touch_num, but that value is taken verbatim from a 4-bit field of the device configuration block and is never clamped: ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; The nibble can be 0..15, so a malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can advertise up to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num of up to 15 and the second goodix_i2c_read() writes ts->contact_size * (touch_num - 1) bytes past the one-contact header into point_data - up to 30 bytes (45 with the 9-byte report format) beyond the 92-byte buffer: a stack out-of-bounds write. Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts point_data[] is sized for, when reading it from the configuration. |
| CVE-2026-64273 | In the Linux kernel, the following vulnerability has been resolved: Input: iforce - bound the device-reported force-feedback effect index iforce_process_packet() handles a status report (packet id 0x02) by taking a force-feedback effect index straight from the device wire and using it to address the per-effect state array: i = data[1] & 0x7f; if (data[1] & 0x80) { if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) ... } else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) { ... } The index is masked only with 0x7f, so it ranges 0..127, but core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index of 32..127 the test_and_set_bit()/test_and_clear_bit() is an out-of-bounds single-bit read-modify-write past the array. core_effects[] is the second-to-last member of struct iforce, so the write lands in the trailing members and beyond the embedding kzalloc()'d iforce_serio / iforce_usb object. data[1] is unvalidated device payload on both transports (the USB interrupt endpoint and serio), and the status path is not gated on force feedback being present, so a malicious or counterfeit device can set or clear a bit at an attacker-chosen offset past the object. Reject an out-of-range index instead of indexing with it. Bound against the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so the check guarantees memory safety regardless of how many effects the device registered. A legitimate "effect started/stopped" status always carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are unaffected; the neighbouring mark_core_as_ready() loop is already bounded and is left untouched. |
| CVE-2026-64272 | In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - fix touch indexing for MMS134S and MMS136 The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly. Fix this by explicitly calculating the byte offset for each touch event based on the device's specific event size. |
| CVE-2026-64271 | In the Linux kernel, the following vulnerability has been resolved: Input: touchwin - reset the packet index on every complete packet tw_interrupt() accumulates each non-zero serial byte into a fixed three-byte buffer with a running index that is only reset once a full packet has been received *and* the device's two Y bytes agree: tw->data[tw->idx++] = data; if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { ... tw->idx = 0; } The reset is gated on tw->data[1] == tw->data[2], a value the device controls. A malicious, malfunctioning or counterfeit Touchwindow peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the index reaches TW_LENGTH without the equality holding, is never reset, and keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte array and the rest of the heap-allocated struct tw, one attacker-chosen byte at a time -- an unbounded, device-driven heap out-of-bounds write. Reset the index on every completed packet and report an event only when the two Y bytes match, like the other serio touchscreen drivers do. |
| CVE-2026-64270 | In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - reject an oversized device packet size mms114_interrupt() reads a packet of touch data from the device into a fixed-size on-stack buffer struct mms114_touch touch[MMS114_MAX_TOUCH]; which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes, i.e. 80 bytes. The length of the I2C read into it is taken verbatim from the device: packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE); if (packet_size <= 0) goto out; ... error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size, (u8 *)touch); packet_size is a single device register byte (0x0F) and the only check is the lower bound packet_size <= 0; it is never bounded against the size of touch[]. A malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can report a packet_size of up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of touch[] on the IRQ-thread stack: a stack out-of-bounds write that can overwrite the stack canary, saved registers and the return address. A well-formed device never reports more than the buffer holds, so reject an oversized packet and drop the report, consistent with the handler's other error paths, rather than reading past the buffer. |
| CVE-2026-64269 | In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The source address is the fixed chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs layer does not constrain the transfer length to max_chunk_size. msg_id and off are bounded against queue_depth and max_chunk_size in rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not checked against the chunk size. A peer that advertises desc[0].len larger than max_chunk_size can make the posted RDMA write read past the chunk's mapped region. The resulting behaviour depends on the IOMMU configuration: with no IOMMU or in passthrough mode the read may extend into memory adjacent to the chunk and be returned to the peer, which can disclose host memory; with a translating IOMMU the out-of-range access is expected to fault and abort the connection. In either case the transfer exceeds what the protocol permits and is driven by a remote peer. Reject a descriptor length above max_chunk_size, mirroring the existing off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients do not exceed it: the client sets desc[0].len to its MR length, which is capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). |
| CVE-2026-64268 | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer. |
| CVE-2026-64266 | In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before returning from fuse_ref_folio() fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning. |
| CVE-2026-64256 | In the Linux kernel, the following vulnerability has been resolved: xfs: don't wrap around quota ids in dqiterate LOLLM noticed that q_id is an unsigned 32-bit variable. If it happens to be set to XFS_DQ_ID_MAX due to a filesystem that actually has a dquot for ID_MAX, then this addition will truncate to zero and the iteration starts over. Fix this by casting to u64. |
| CVE-2026-64254 | In the Linux kernel, the following vulnerability has been resolved: NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown path ends up calling pci_iounmap() on the same iomem with some offset, which is unnecessary and triggers a kernel warning like the following: Trying to vunmap() nonexistent vm area (0000000069a5ffe8) WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937 [...] Call trace: vunmap+0x58/0x68 (P) iounmap+0x34/0x48 pci_iounmap+0x2c/0x40 ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf] pci_device_remove+0x48/0xf8 device_remove+0x50/0x88 device_release_driver_internal+0x1c8/0x228 driver_detach+0x50/0xb0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x68 pci_unregister_driver+0x34/0xa0 ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf] [...] Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars. |
| CVE-2026-64249 | In the Linux kernel, the following vulnerability has been resolved: fpga: region: fix use-after-free in child_regions_with_firmware() Move of_node_put(child_region) after the error print to avoid accessing freed memory when pr_err() references child_region. [ Yilun: Fix the Fixes tag ] |
| CVE-2026-64247 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: hyper-v: Bound the bank index when querying sparse banks When checking if a VP ID is included in a sparse bank set, explicitly check that the ID can actually be contained in a sparse bank (the TLFS allows for a maximum of 64 banks of 64 vCPUs each). When handling a paravirtual TLB flush for L2, the VP ID is copied verbatim from the enlightened VMCS, without any bounds check, i.e. isn't guaranteed to be under the limit of 4096. Failure to check the bounds of the VP ID leads to an out-of-bounds read when testing the sparse bank, and super strictly speaking could lead to KVM performing an unnecessary TLB flush for an L2 vCPU. ================================================================== BUG: KASAN: use-after-free in hv_is_vp_in_sparse_set+0x85/0x100 [kvm] Read of size 8 at addr ffff88811ba5f598 by task hyperv_evmcs/2802 CPU: 12 UID: 1000 PID: 2802 Comm: hyperv_evmcs Not tainted 7.1.0-rc2 #7 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5d0 kasan_report+0xb4/0xe0 kasan_check_range+0x35/0x1b0 hv_is_vp_in_sparse_set+0x85/0x100 [kvm] kvm_hv_flush_tlb+0xe9e/0x16c0 [kvm] kvm_hv_hypercall+0xe6b/0x1e60 [kvm] vmx_handle_exit+0x485/0x1b60 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x22e3/0x5070 [kvm] kvm_vcpu_ioctl+0x5d0/0x10c0 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0xb9/0xcf0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f0e62d1a9bf </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffffffffffffffff pfn:0x11ba5f flags: 0x4000000000000000(zone=1) raw: 4000000000000000 0000000000000000 00000000ffffffff 0000000000000000 raw: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88811ba5f480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88811ba5f500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88811ba5f580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88811ba5f600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88811ba5f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Opportunistically add a compile time assertion to ensure the maximum number of sparse banks exactly matches the number of possible bits in the passed in mask. [sean: add KASAN splat, drop comment, add assert, massage changelog] |
| CVE-2026-64246 | In the Linux kernel, the following vulnerability has been resolved: power: reset: linkstation-poweroff: fix use-after-free in the linkstation_poweroff_init() Move of_node_put(dn) after the of_match_node() call, which still needs the node pointer. The node reference is correctly released after use. |
| CVE-2026-64245 | In the Linux kernel, the following vulnerability has been resolved: fbdev: modedb: fix a possible UAF in fb_find_mode() If mode_option is NULL, it is assigned from mode_option_buf: if (!mode_option) { fb_get_options(NULL, &mode_option_buf); mode_option = mode_option_buf; } Later, name is assigned from mode_option: const char *name = mode_option; However, mode_option_buf is freed before name is no longer used: kfree(mode_option_buf); while name is still accessed by: if ((name_matches(db[i], name, namelen) || Since name aliases mode_option_buf, this may result in a use-after-free. Fix this by extending the lifetime of mode_option_buf until the end of the function by using scope-based resource management for cleanup. |
| CVE-2026-64244 | In the Linux kernel, the following vulnerability has been resolved: drivers/base/memory: set mem->altmap after successful device registration If __add_memory_block() fails at xa_store() (under memory pressure for example), device_unregister() is called, which eventually triggers memory_block_release() with mem->altmap still set, causing a WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver. Fix this by delaying the assignment of mem->altmap until after __add_memory_block() has succeeded. |
| CVE-2026-64243 | In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: simple-mux: Fix enum control bounds check simple_mux_control_put() rejects values greater than e->items, but enum control values are zero based. For the two-entry mux used by this driver, valid values are 0 and 1, so value 2 must be rejected as well. Accepting e->items can store an invalid mux state, pass it to the GPIO setter, and pass it on to the DAPM mux update path where it is used as an index into the enum text array. Use the same >= e->items check used by the ASoC enum helpers. |
| CVE-2026-64242 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: net2280: Fix double free in probe error path usb_initialize_gadget() installs gadget_release() as the release callback for the embedded gadget device. The struct net2280 instance is therefore released through gadget_release() when the gadget device's last reference is dropped. The probe error path calls net2280_remove(), which tears down the partially initialized device and drops the gadget reference with usb_put_gadget(). Calling kfree(dev) afterwards can free the same object again. Drop the explicit kfree() and let the gadget device release callback handle the final free. This issue was found by a static analysis tool I am developing. |
| CVE-2026-64241 | In the Linux kernel, the following vulnerability has been resolved: gpio: rockchip: teardown bugs and resource leaks Address several teardown issues and resource leaks in the driver's remove path and error handling: 1. Debounce clock reference leak: The debounce clock (bank->db_clk) is obtained using of_clk_get() which increments the clock's reference count, but clk_put() is never called. Register a devm action to cleanly release it on unbind. Note that of_clk_get(..., 1) remains necessary over devm_clk_get() because the DT binding does not define clock-names, precluding name-based lookup. 2. Unregistered chained IRQ handler: The chained IRQ handler is not disconnected in remove(). If a stray interrupt fires after the driver is removed, the kernel attempts to execute a stale handler, leading to a panic. Fix this by clearing the handler in remove(). 3. IRQ domain leak: The linear IRQ domain and its generic chips are allocated manually during probe but never removed. Remove the IRQ domain during driver teardown to free the associated generic chips and mappings. [Bartosz: don't emit an error message on devres allocation failure] |
| CVE-2026-64240 | In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: fix control request setup packet Commit eac69475b01f ("media: rc: igorplugusb: heed coherency rules") changed the control request storage from an embedded struct to an allocated pointer so it can obey DMA coherency rules. However, the driver still passes &ir->request to usb_fill_control_urb(). That points the URB setup packet at the pointer field itself rather than at the allocated struct usb_ctrlrequest. USB core then interprets pointer bytes as the setup packet. This can produce an invalid bRequestType and trigger the control direction warning reported by syzbot: usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0 Pass ir->request itself as the setup packet. |
| CVE-2026-64239 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: delete tried region in regions_rmdirs() DAMON sysfs maintains the DAMOS tried region directory objects via a linked list. When the user requests refresh of the directories, DAMON sysfs removes all the region directories first, and then generate updated regions directory on the empty space. The removal function (damon_sysfs_scheme_regions_rm_dirs()) only puts the kobj objects. Deletion of the container region object from the linked list is done inside the kobj release callback function. If somehow the callback invocation is delayed, the list will contain regions list that gonna be freed. If the updated region directories creation is started in this situation, the list can be corrupted and use-after-free can happen. Because the kobj objects are managed by only DAMON sysfs, the issue cannot happen in normal situation. But, such delays can be made on kernels that built with CONFIG_DEBUG_KOBJECT_RELEASE. On the kernel, the issue can indeed be reproduced like below. # damo start --damos_action stat # cd /sys/kernel/mm/damon/admin/kdamonds/0/ # for i in {1..10}; do echo update_schemes_tried_regions > state; done # dmesg | grep underflow [ 89.296152] refcount_t: underflow; use-after-free. Fix the issue by removing the region object from the list when decrementing the reference count. Also update damos_sysfs_populate_region_dir() to add the region object to the list only after the kobject_init_and_add() is success, so that fail of kobject_init_and_add() is not leaving the deallocated object on the list. The issue was discovered [1] by Sashiko. |
| CVE-2026-64237 | In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - validate firmware size before use Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads. |
| CVE-2026-64234 | In the Linux kernel, the following vulnerability has been resolved: tty: serial: pch_uart: add check for dma_alloc_coherent() Add a check for dma_alloc_coherent() failure to prevent a potential NULL pointer dereference in dma_handle_rx(). Properly release DMA channels and the PCI device reference using a goto ladder if the allocation fails. |
| CVE-2026-64233 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind uvc_function_bind() walks &opts->extension_units twice without holding opts->lock: - directly, for the iExtension string-descriptor fixup loop; - indirectly, four times via uvc_copy_descriptors() (once per speed), where the helper iterates uvc->desc.extension_units (which aliases &opts->extension_units) to size and emit XU descriptors. The configfs side (uvcg_extension_make / uvcg_extension_drop, in drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its list_add_tail / list_del operations. A privileged userspace process that holds the configfs subtree open and writes the gadget UDC name to bind the function while concurrently rmdir()'ing an extensions subdir can race uvcg_extension_drop() against the bind-time list walks and dereference a freed struct uvcg_extension. Hold opts->lock from the start of the XU string-descriptor fixup through the last uvc_copy_descriptors() call, releasing on the descriptor-error path via a new error_unlock label that drops the lock before falling through to the existing error label. This matches the locking discipline of the configfs callbacks and removes the only remaining unsynchronised reader of the XU list during bind. Reachability: only privileged processes that can mount configfs and write to gadget UDC files can trigger the race, so this is a correctness fix rather than a security boundary. |
| CVE-2026-64222 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: avoid double free of pool->stack on AQ init failure otx2_pool_aq_init() frees pool->stack when mailbox sync or retry allocation fails, but leaves the pointer unchanged. Later, otx2_sq_aura_pool_init() unwinds the partial setup through otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific cn20k_pool_aq_init() implementation has the same bug in its corresponding error path. Set pool->stack to NULL immediately after the local free so the shared cleanup path does not free the same stack again while cleaning up partially initialized pool state. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2/CN20K hardware. |
| CVE-2026-64212 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the function so we have it after we freed the link. But the link pointer can be NULL, and is not checked when the fw_id is stored. Fix it by simply freeing the link at the end of the function. fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()") |
| CVE-2026-64210 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked. This issue was noticed in the wild with the following splat: netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...] [...] Call Trace: <IRQ> mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core] __napi_poll+0x30/0x200 ? skb_defer_free_flush+0x9c/0xc0 net_rx_action+0x2fe/0x3f0 handle_softirqs+0xd8/0x340 __irq_exit_rcu+0xbc/0xe0 common_interrupt+0x85/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 [...] ---[ end trace 0000000000000000 ]--- mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2 WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64 00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02 00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02 00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02 00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02 mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4, opcode 0xd, syndrome 0x5, vendor syndrome 0xf9 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2 |
| CVE-2026-64206 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for pending_rx_work. process_pending_rx() takes the same mutex, so teardown can deadlock against the worker it is flushing. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the l2cap_conn_ready() -> queue_work(..., &conn->pending_rx_work) submit path, the l2cap_conn_del() -> cancel_work_sync(&conn->pending_rx_work) teardown path, and the process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep WARNING: possible circular locking dependency detected process_pending_rx+0x21/0x2a [vuln_msv] l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv] *** DEADLOCK *** Cancel pending_rx_work before taking conn->lock, matching the existing lock-before-drain ordering used for the two delayed works in the same teardown path. The pending_rx queue is still purged after the work has been cancelled and conn->lock has been acquired. |
| CVE-2026-64205 | In the Linux kernel, the following vulnerability has been resolved: i2c: i801: fix hardware state machine corruption in error path A severe livelock and subsequent Hung Task panic were observed in the i2c-i801 driver during concurrent Fuzzing. The crash is caused by an unconditional hardware register cleanup in the error handling path of i801_access(). When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus controller is actively used by BIOS/ACPI), the kernel does not actually acquire the hardware ownership. However, the code jumps to the 'out' label and executes: iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv)); This forcefully clears the INUSE_STS lock and resets the hardware status flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI transactions and totally corrupts the SMBus hardware state machine. Consequently, all subsequent i801_access() calls fail at the pre-check stage, triggering an endless stream of "SMBus is busy, can't use it!" error logs. Over a slow serial console, this printk flood monopolizes the CPU (Console Livelock), starving other processes trying to acquire the mmap_lock down_read semaphore, ultimately triggering the hung task watchdog. Fix this by moving the 'out' label below the hardware register cleanup. If i801_check_pre() fails, we safely bypass the iowrite8() and only release the software locks (pm_runtime and mutex), strictly adhering to the rule of not releasing resources that were never acquired. |
| CVE-2026-64192 | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized When CONFIG_BPF_LSM=y is set, BPF inode storage maps (BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However, if the BPF LSM is not explicitly enabled at boot time (e.g. omitted from the "lsm=" boot parameter), lsm_prepare() is never executed for the BPF LSM. Consequently, the BPF inode security blob offset (bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at its default compiled size of 8 bytes instead of being updated to a valid offset past the reserved struct rcu_head (typically 16 bytes or more). When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE map, bpf_inode() evaluates inode->i_security + 8. This erroneously aliases the struct rcu_head.func callback pointer at the beginning of the inode->i_security blob. During subsequent map element cleanup or inode destruction, writing NULL to owner_storage clears the queued RCU callback pointer. When rcu_do_batch() later executes the queued callback, it attempts an instruction fetch at address 0x0, triggering an immediate kernel panic. Fix this by introducing a global bpf_lsm_initialized boolean flag marked with __ro_after_init. Set this flag to true inside bpf_lsm_init() when the LSM framework successfully registers the BPF LSM. Gate map allocation in inode_storage_map_alloc() on this flag, returning -EOPNOTSUPP if the BPF LSM is in turn uninitialized. This fail-fast approach prevents userspace from allocating inode storage maps when the supporting BPF LSM infrastructure is absent, avoiding zombie map states. |
| CVE-2026-64191 | In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing stub_xfer() to read or write past the end of the union i2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: <TASK> stub_xfer (drivers/i2c/i2c-stub.c:223) __i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593) i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536) i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391) i2cdev_ioctl (drivers/i2c/i2c-dev.c:478) __x64_sys_ioctl (fs/ioctl.c:583) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> The bug exists because i2c-stub implements .smbus_xfer directly, bypassing the I2C_SMBUS_BLOCK_MAX validation in i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same function correctly validates against I2C_SMBUS_BLOCK_MAX, but the I2C_SMBUS_I2C_BLOCK_DATA case does not. Fix by rejecting transfers with data->block[0] == 0 or data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with both the I2C_SMBUS_BLOCK_DATA case in the same function and the I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). |
| CVE-2026-64189 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix race between dump and ip_set_list resize The release path of ip_set_dump_do() and ip_set_dump_done() read inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw() of the array pointer. These run from netlink_recvmsg() without the nfnl mutex and without an RCU read-side critical section. A concurrent ip_set_create() can grow the array: it publishes the new array, calls synchronize_net() and then kvfree()s the old one. Since the dump paths read the array outside any RCU reader, synchronize_net() does not wait for them and the old array can be freed while they still index into it, causing a use-after-free. The dumped set itself stays pinned via set->ref_netlink, so only the array load needs protecting. Take rcu_read_lock() around it, matching ip_set_get_byname() and __ip_set_put_byindex(). BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315) ... Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7] RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698) Kernel panic - not syncing: Fatal exception |
| CVE-2026-64188 | In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink() rmnet_dellink() removes the endpoint from the hash table with hlist_del_init_rcu() and then immediately frees it with kfree(). However, RCU readers on the receive path (rmnet_rx_handler -> __rmnet_map_ingress_handler) may still hold a reference to the endpoint and dereference ep->egress_dev after the memory has been freed. The endpoint is a kmalloc-32 object, and the stale read at offset 8 corresponds to the egress_dev pointer. BUG: unable to handle page fault for address: ffffffffde942eef Oops: 0002 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27) Call Trace: <TASK> __rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101) rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6096) __netif_receive_skb_one_core (net/core/dev.c:6208) netif_receive_skb (net/core/dev.c:6467) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2003) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) </TASK> Add an rcu_head field to struct rmnet_endpoint and replace kfree() with kfree_rcu() so the endpoint memory remains valid through the RCU grace period. Also remove the rmnet_vnd_dellink() call and inline only the nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set ep->egress_dev to NULL during the grace period, creating a data race with lockless readers. |
| CVE-2026-64187 | In the Linux kernel, the following vulnerability has been resolved: xfs: fail recovery on a committed log item with no regions If the first op of a transaction is a bare transaction header (len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans() adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and ri_buf == NULL. The header can be split across op records, so later ops may still add regions; the item is only invalid if the transaction commits with none. The runtime commit path never emits such a transaction, so this only happens on a crafted log. It came from an AI-assisted code audit of the recovery parser. xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads *(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL ri_buf. Reject it there, before the commit handlers that also read ri_buf[0]. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:xlog_recover_reorder_trans (fs/xfs/xfs_log_recover.c:1836) xlog_recover_commit_trans (fs/xfs/xfs_log_recover.c:2043) xlog_recover_process_data (fs/xfs/xfs_log_recover.c:2501) xlog_do_recovery_pass (fs/xfs/xfs_log_recover.c:3244) xlog_recover (fs/xfs/xfs_log_recover.c:3493) xfs_log_mount (fs/xfs/xfs_log.c:618) xfs_mountfs (fs/xfs/xfs_mount.c:1034) xfs_fs_fill_super (fs/xfs/xfs_super.c:1938) vfs_get_tree (fs/super.c:1695) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367) |
| CVE-2026-64176 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix driver-set TX rates on old devices On old devices such as 7265D, rates are still encoded in version 1 format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.) While introducing v3 rates, I changed the driver from internally handling v1 rates and converting to v2, to internally handling v3 and converting to v1 or v2 according to the firmware. I accordingly changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer have different values for different APIs. This was correct. However, I later reverted this part of the change, because it was reported that I had broken beacon rates, causing a FW assert/crash. This caused TX_CMD rates to be set incorrectly, potentially causing a warning when reported back from the device as having been used. Fix this (hopefully correctly now) by handling beacon rates in the TX_CMD that's embedded in the beacon template command separately. Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate index, not PLCP value, fixing the real TX_CMD. |
| CVE-2026-64158 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| CVE-2026-64131 | In the Linux kernel, the following vulnerability has been resolved: mm/memory: fix spurious warning when unmapping device-private/exclusive pages Device private and exclusive entries are only supported for anonymous folios. This condition is tested in __migrate_device_pages() and make_device_exclusive() using folio_test_anon(). However the unmap path tests this assumption using vma_is_anonymous(). This is wrong because whilst anonymous VMAs can only contain folios where folio_test_anon() is true the opposite relation does not hold. A folio for which folio_test_anon() is true does not imply vma_is_anonymous() is true. Such a condition can occur if for example a folio is part of a private filebacked mapping. In this case vma_is_anonymous() is false as the mapping is filebacked, but folio_test_anon() may be true, thus permitting devices to migrate the folio to device private memory. This can lead to the following spurious warnings during process teardown: [ 772.737706] ------------[ cut here ]------------ [ 772.739201] WARNING: mm/memory.c:1754 at unmap_page_range.cold+0x26/0x18a, CPU#17: hmm-tests/2041 [ 772.742050] Modules linked in: test_hmm nvidia_uvm(O) nvidia(O) [ 772.743959] CPU: 17 UID: 0 PID: 2041 Comm: hmm-tests Tainted: G W O 7.0.0+ #387 PREEMPT(full) [ 772.747104] Tainted: [W]=WARN, [O]=OOT_MODULE [ 772.748509] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 772.752117] RIP: 0010:unmap_page_range.cold+0x26/0x18a [ 772.753780] Code: 7e fe ff ff 48 89 4c 24 78 4c 89 44 24 38 e8 f2 ff b1 00 48 8b 4c 24 78 4c 8b 44 24 38 48 8b 44 24 18 48 83 78 48 00 74 04 90 <0f> 0b 90 48 89 ca b8 ff ff 37 00 48 c1 ea 03 48 c1 e0 2a 80 3c 02 [ 772.759602] RSP: 0018:ffff888112607550 EFLAGS: 00010286 [ 772.761310] RAX: ffff88811bbf4dc0 RBX: dffffc0000000000 RCX: ffffea03e9bfffd8 [ 772.763583] RDX: 1ffff1102377e9c1 RSI: 0000000000000008 RDI: ffff88811bbf4e08 [ 772.765914] RBP: 0000000000000006 R08: ffff8881059f7448 R09: ffffed10224c0e68 [ 772.768184] R10: ffff888112607347 R11: 0000000000000001 R12: 0000000000000001 [ 772.770461] R13: ffffea03e9bfffc0 R14: ffff888112607908 R15: ffffea03e9bfffc0 [ 772.772782] FS: 00007f327caa2780(0000) GS:ffff888427b7d000(0000) knlGS:0000000000000000 [ 772.775328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 772.777187] CR2: 00007f327ca89000 CR3: 00000001994d5000 CR4: 00000000000006f0 [ 772.779135] Call Trace: [ 772.779792] <TASK> [ 772.780317] ? dmirror_interval_invalidate+0x1a3/0x290 [test_hmm] [ 772.781873] ? vm_normal_page_pud+0x2b0/0x2b0 [ 772.782992] ? __rwlock_init+0x150/0x150 [ 772.784006] ? lock_release+0x216/0x2b0 [ 772.785008] ? __mmu_notifier_invalidate_range_start+0x505/0x6e0 [ 772.786522] ? lock_release+0x216/0x2b0 [ 772.787498] ? unmap_single_vma+0xb6/0x210 [ 772.788573] unmap_vmas+0x27d/0x520 [ 772.789506] ? unmap_single_vma+0x210/0x210 [ 772.790607] ? mas_update_gap.part.0+0x620/0x620 [ 772.791834] unmap_region+0x19e/0x350 [ 772.792769] ? remove_vma+0x130/0x130 [ 772.793684] ? mas_alloc_nodes+0x1f2/0x300 [ 772.794730] vms_complete_munmap_vmas+0x8c1/0xe20 [ 772.795926] ? unmap_region+0x350/0x350 [ 772.796917] do_vmi_align_munmap+0x36a/0x4e0 [ 772.798018] ? lock_release+0x216/0x2b0 [ 772.799024] ? vma_shrink+0x620/0x620 [ 772.799983] do_vmi_munmap+0x150/0x2c0 [ 772.800939] __vm_munmap+0x161/0x2c0 [ 772.801872] ? expand_downwards+0xd60/0xd60 [ 772.802948] ? clockevents_program_event+0x1ef/0x540 [ 772.804217] ? lock_release+0x216/0x2b0 [ 772.805158] __x64_sys_munmap+0x59/0x80 [ 772.805776] do_syscall_64+0xfc/0x670 [ 772.806336] ? irqentry_exit+0xda/0x580 [ 772.806976] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 772.807772] RIP: 0033:0x7f327cbb2717 [ 772.808323] Code: 73 01 c3 48 8b 0d f9 76 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 0b 00 00 00 0f 05 <48> 3d 01 f0 ff ---truncated--- |
| CVE-2026-64123 | In the Linux kernel, the following vulnerability has been resolved: net: hsr: defer node table free until after RCU readers HSR node-list and node-status generic-netlink operations run under rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table with plain list_del() and frees each node immediately. That lets a generic-netlink reader hold a struct hsr_node pointer across hsr_dellink(). In a KASAN build, widening the reader window after hsr_get_next_node() obtains the node reproduces a slab-use-after-free when the reader copies node->macaddress_A; the freeing stack is hsr_del_nodes() from hsr_dellink(). Use list_del_rcu() and defer the free through the existing hsr_free_node_rcu() callback. This matches the lifetime rule used by the HSR prune paths, which already delete nodes with list_del_rcu() and call_rcu(). |
| CVE-2026-64099 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix use-after-free of CPU job query arrays on error path The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and performance query arrays after v3d_job_cleanup(), which drops the job's last reference and frees cpu_job. Reading cpu_job at that point is a use-after-free. Also, on the early v3d_job_init() failure path, it is a NULL dereference, since v3d_job_deallocate() zeroes the local pointer. In the success path, the arrays are released from the scheduler's .free_job callback, but on the error path, they are freed manually, as the job was never pushed to the scheduler. While the success path deals with this correctly, the fail path doesn't. On top of that, the manual kvfree() calls only free the array storage; they don't drm_syncobj_put() the per-query syncobjs that v3d_timestamp_query_info_free() and v3d_performance_query_info_free() release on the success path. So the same fail path that triggers the use-after-free also leaks one syncobj reference per query. Unify the CPU job teardown into the CPU job's kref destructor, mirroring v3d_render_job_free(). The scheduler's .free_job slot reverts to the generic v3d_sched_job_free() and the fail label drops the manual kvfree() calls, leaving a single teardown path that is reached from both the scheduler and the ioctl error path. That removes the use-after-free, the NULL dereference, and the syncobj leak by construction. |
| CVE-2026-64095 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid double decrement of bla.num_requests The bla.num_requests is increased when no request_sent was in progress. And it is decremented in various places (announcement was received, backbone is purged, periodic work). But the check if the request_sent is actually set to a specific state and the atomic_dec/_inc are not safe because they are not atomic (TOCTOU) and multiple such code portions can run concurrently. At the same time, it is necessary to modify request_sent (state) and bla.num_requests atomically. Otherwise batadv_bla_send_request() might set request_sent to 1 and is interrupted. batadv_handle_announce() can then set request_sent back to 0 and decrement num_requests before batadv_bla_send_request() incremented it. The two operations must therefore be locked. And since state (request_sent) and wait_periods are only accessed inside this lock, they can be converted to simpler datatypes. And to avoid that the bla.num_requests is touched by a parallel running context with a valid backbone_gw reference after batadv_bla_purge_backbone_gw() ran, a third state "stopped" is required to correctly signal that a backbone_gw is in the state of being cleaned up. |
| CVE-2026-64094 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid NULL-ptr deref for claim via dropped interface Without rtnl_lock held, a hardif might be retrieved as primary interface of a meshif, but then (while operating on this interface) getting decoupled from the mesh interface. In this case, the meshif still exists but the pointer from the primary hardif to the meshif is set to NULL. The mesh_iface must be checked first to be non-NULL before continuing to send an ARP request using meshif. |
| CVE-2026-64093 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: directly shut down timer on cleanup batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by timer_delete() to guard against the timer handler re-arming itself between the two calls. This double-deletion hack relied on the sending status being set to 0 to suppress re-arming. Replace both calls with a single timer_shutdown_sync(). This function both waits for any running timer callback to complete (like timer_delete_sync()) and permanently disarms the timer so it cannot be re-armed afterwards, making re-arming prevention unconditional and self-documenting. The re-arming property is also required because otherwise: 1. context 0 (batadv_tp_recv_ack()) checks in batadv_tp_reset_sender_timer() if sending is still 1 -> it is 2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in this process forces the kthread to stop timer in batadv_tp_sender_cleanup() 3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the timer -> but the reference for it is already gone |
| CVE-2026-64091 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix TOCTOU race for reported vlans The local TT based TVLV is generated by first checking the number of VLANs which have at least one TT entry. A new buffer with the correct size for the VLANs is then allocated. Only then, the list of VLANs s used to fill the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock is held. But the actual number of TT entries of each VLAN can still increase during this time - just not the number of VLANs in the list. But the prefilter used in the buffer size calculation might still cause an increase of the number of VLANs which need to be stored. Simply because a VLAN might now suddenly have at least one entry when it had none in the pre-alloc check - and then needs to occupy space which was not allocated. It is better to overestimate the buffer size at the beginning and then fill the buffer only with the VLANs which are not empty. |
| CVE-2026-64090 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid empty VLAN responses The commit 16116dac2339 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs") added checks to the local (direct) TT response code. But the response can also be done indirectly by another node using the global TT state. To avoid such inconsistency states reported in the original fix, also avoid sending empty VLANs for replies from the global TT state. |
| CVE-2026-64082 | In the Linux kernel, the following vulnerability has been resolved: riscv: Fix register corruption from uninitialized cregs on error compat_riscv_gpr_set() calls cregs_to_regs() unconditionally, even when user_regset_copyin() fails. Since cregs is an uninitialized stack variable, a copyin failure causes uninitialized stack data to be written into the target task's pt_regs, corrupting its register state and potentially leaking kernel stack contents. compat_restore_sigcontext() has the same issue: it calls cregs_to_regs() even when __copy_from_user() fails, leading to the same corruption of the signal-returning task's register state on error. Only call cregs_to_regs() when the user copy succeeds. |
| CVE-2026-64070 | In the Linux kernel, the following vulnerability has been resolved: powerpc/hv-gpci: fix preempt count leak in sysfs show paths Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb) (which calls preempt_disable()) but only call the matching put_cpu_var() on the error path under the 'out:' label. Every successful read leaks one preempt_disable(): processor_bus_topology_show() processor_config_show() affinity_domain_via_virtual_processor_show() affinity_domain_via_domain_show() (affinity_domain_via_partition_show() was already correct.) On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and eventually return to userspace with preemption still disabled. The next user-mode page fault then hits faulthandler_disabled() == 1, gets forced to SIGSEGV, and the resulting coredump trips 'BUG: scheduling while atomic' in call_usermodehelper_exec -> wait_for_completion_state -> schedule: BUG: scheduling while atomic: <task>/<pid>/0x00000004 ... __schedule_bug+0x6c/0x90 __schedule+0x58c/0x13a0 schedule+0x48/0x1a0 schedule_timeout+0x104/0x170 wait_for_completion_state+0x16c/0x330 call_usermodehelper_exec+0x254/0x2d0 vfs_coredump+0x1050/0x2590 get_signal+0xb9c/0xc80 do_notify_resume+0xf8/0x470 Add an out_success label that calls put_cpu_var() before returning the byte count, mirroring affinity_domain_via_partition_show(). |
| CVE-2026-64026 | In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff. |
| CVE-2026-64017 | In the Linux kernel, the following vulnerability has been resolved: blk-mq: pop cached request if it is usable When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it. |
| CVE-2026-64014 | In the Linux kernel, the following vulnerability has been resolved: Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size nexio_read_data() pulls data_len and x_len from a packed __be16 header in the device's interrupt packet and then walks packet->data[0..x_len) and packet->data[x_len..data_len) comparing each byte against a threshold. Both fields are 16-bit on the wire (max 65535). The existing adjustments shave at most 0x100 / 0x80 off, so the loop bound can still reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size (1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the packed header — so packet->data[] has 1017 valid bytes. read_data() callbacks are not given urb->actual_length, and nothing else bounds the walk. A device that lies about its length can get a ~64 KiB out-of-bounds read past the coherent DMA allocation. The first index whose byte exceeds NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the reported touch coordinates, so adjacent kernel memory contents leak to userspace as ABS_X / ABS_Y events. Far enough out, the read can also hit an unmapped page and fault. Fix this all by clamping data_len to the buffer's data[] capacity and x_len to data_len. |
| CVE-2026-64012 | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_sfb: Replace direct dequeue call with peek and qdisc_dequeue_peeked When sfb has children (eg qfq qdisc) whose peek() callback is qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from its child (sfb in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(sfb) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet. Note: if there wasnt a gso_skb entry then qfq will store it there. 1b. invoke a dequeue() on the child (sfb). And herein lies the problem. - sfb will call the child's dequeue() which will essentially just try to grab something of qfq's queue. [ 127.594489][ T453] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] [ 127.594741][ T453] CPU: 2 UID: 0 PID: 453 Comm: ping Not tainted 7.1.0-rc1-00035-gac961974495b-dirty #793 PREEMPT(full) [ 127.595059][ T453] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 127.595254][ T453] RIP: 0010:qfq_dequeue+0x35c/0x1650 [sch_qfq] [ 127.595461][ T453] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b [ 127.596081][ T453] RSP: 0018:ffff88810e5af440 EFLAGS: 00010216 [ 127.596337][ T453] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 127.596623][ T453] RDX: 0000000000000009 RSI: 0000001880000000 RDI: ffff888104fd82b0 [ 127.596917][ T453] RBP: ffff888104fd8000 R08: ffff888104fd8280 R09: 1ffff110211893a3 [ 127.597165][ T453] R10: 1ffff110211893a6 R11: 1ffff110211893a7 R12: 0000001880000000 [ 127.597404][ T453] R13: ffff888104fd82b8 R14: 0000000000000048 R15: 0000000040000000 [ 127.597644][ T453] FS: 00007fc380cbfc40(0000) GS:ffff88816f2a8000(0000) knlGS:0000000000000000 [ 127.597956][ T453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 127.598160][ T453] CR2: 00005610aa9890a8 CR3: 000000010369e000 CR4: 0000000000750ef0 [ 127.598390][ T453] PKRU: 55555554 [ 127.598509][ T453] Call Trace: [ 127.598629][ T453] <TASK> [ 127.598718][ T453] ? mark_held_locks+0x40/0x70 [ 127.598890][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599053][ T453] sfb_dequeue+0x88/0x4d0 [ 127.599174][ T453] ? ktime_get+0x137/0x230 [ 127.599328][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599480][ T453] ? qdisc_peek_dequeued+0x7b/0x350 [sch_qfq] [ 127.599670][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599831][ T453] tbf_dequeue+0x6b1/0x1098 [sch_tbf] [ 127.599988][ T453] __qdisc_run+0x169/0x1900 The right thing to do in #1b is to grab the skb off gso_skb queue. This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked() method instead. |
| CVE-2026-64011 | In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free in llcp_sock_release() llcp_sock_release() unconditionally unlinks the socket from the local sockets list. However, if the socket is still in connecting state, it is on the connecting list. Fix this by checking the socket state and unlinking from the correct list. |
| CVE-2026-64010 | In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc() A race condition exists in the NFC LLCP connection state machine where the connection acceptance packet (CC) can be processed concurrently with socket release. This can lead to a use-after-free of the socket object. When nfc_llcp_recv_cc() moves the socket from the connecting_sockets list to the sockets list, it does so without holding the socket lock. If llcp_sock_release() is executing concurrently, it might have already unlinked the socket and dropped its references, which can result in nfc_llcp_recv_cc() linking a freed socket into the live list. Fix this by holding lock_sock() during the state transition and list movement in nfc_llcp_recv_cc(). After acquiring the lock, check if the socket is still hashed to ensure it hasn't already been unlinked and marked for destruction by the release path. This aligns the locking pattern with recv_hdlc() and recv_disc(). |
| CVE-2026-64009 | In the Linux kernel, the following vulnerability has been resolved: xfrm: Check for underflow in xfrm_state_mtu Leo Lin reported OOB write issue in esp component: xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned modulo-2^32 space using an attacker-influenced "header_len + authsize + net_adj" subtracted from a small "mtu" argument. A nobody user can install an IPv4 ESP tunnel SA with a large authentication key (XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc), configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a large value. When a single UDP datagram is then sent through the tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and esp_output() consumes it as a signed int via: padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached)) esp.tfclen = padto - skb->len (assigned to int) esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t when passed to memset() inside esp_output_fill_trailer(), producing a ~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as "Write of size 18446744073709551537 at addr ffff888...". Check for underflow and return 1. This causes the sendmsg attempt to fail with ENETUNREACH. |
| CVE-2026-64007 | In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */ The option bytes are written through skb->data and are fine; only the checksum update goes through th and so lands in the wrong place. The result is either a write into freed slab memory or a packet leaving with a checksum that does not match its payload. Fix by re-deriving th from skb->data + protoff immediately after skb_ensure_writable() succeeds, so the subsequent checksum update targets the linear, writable header. |
| CVE-2026-64006 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix dst corruption in same register operation For lshift and rshift, the shift operations are performed in a loop over 32-bit words. The loop calculates the shifted value and write it to dst, and then immediately reads from src to calculate the carry for the next iteration. Because src and dst could point to the same memory location, the carry is incorrectly calculated using the newly modified dst value instead of the original src value. Adding a temporary local variable to cache the original value before writing to dst and using it for the carry calculation solves the problem. In addition, partial overlap is rejected from control plane for all kind of operations including byteorder. This was tested with the following bytecode: table test_table ip flags 0 use 1 handle 1 ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1 ip test_table test_chain 2 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x66443322 0x00887766 ] [ counter pkts 0 bytes 0 ] ip test_table test_chain 4 3 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x55443322 0x00887766 ] [ counter pkts 21794 bytes 1917798 ] |
| CVE-2026-64005 | In the Linux kernel, the following vulnerability has been resolved: net/smc: Do not re-initialize smc hashtables INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(), proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht being reset even though hash entries already exist and are being used, possibly resulting in a corrupted list. Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in smc_init(); it is implicitly initialised to zero anyhow. Add HLIST_HEAD_INIT to the definitions for clarity. |
| CVE-2026-64004 | In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix locking in .getsockopt Mirror iucv_sock_setsockopt() and wrap the whole switch in lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock becomes redundant and is removed. Any AF_IUCV HIPER user can potentially crash the kernel by racing recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences iucv->hs_dev->mtu after iucv_sock_close() (called from the racing recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference oops. |
| CVE-2026-64003 | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called. |
| CVE-2026-64002 | In the Linux kernel, the following vulnerability has been resolved: ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. |
| CVE-2026-64001 | In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix setup list UAF on proc write error snd_pcm_oss_proc_write() links a newly allocated setup entry into the OSS setup list before duplicating the task name. If the task-name allocation fails, the error path frees the already linked entry and leaves setup_list pointing at freed memory. A later OSS device open can then walk the stale list entry in snd_pcm_oss_look_for_setup() and dereference freed memory. Allocate the task name and initialize the setup entry before publishing the entry on setup_list. Also fetch the initial proc read iterator only after taking setup_mutex, so all setup_list traversal follows the same list lifetime rules. |
| CVE-2026-64000 | In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix potential OOB access in supervision frame handling Ensure the entire TLV header is linearized before access by adding sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this, a truncated frame could cause an out-of-bounds access. |
| CVE-2026-63994 | In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed. |
| CVE-2026-63993 | In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko. |
| CVE-2026-63992 | In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine. |
| CVE-2026-63991 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails. |
| CVE-2026-63990 | In the Linux kernel, the following vulnerability has been resolved: bonding: refuse to enslave CAN devices syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c. |
| CVE-2026-63985 | In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc. |
| CVE-2026-63984 | In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress() ipv6_rpl_srh_decompress() computes: outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3); hdrlen is __u8. For n >= 127 the result exceeds 255 and silently truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16): (128 * 16) >> 3 = 256, truncated to 0 as __u8 The caller in ipv6_rpl_srh_rcv() then places the compressed header at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8, but the decompressed region occupies buf[0..2055] (8-byte header plus 128 full addresses). The compressed header overlaps the decompressed data, and ipv6_rpl_srh_compress() writes into this overlap, corrupting the routing header of the forwarded packet. The existing guard at exthdrs.c:546 checks (n + 1) > 255, which prevents n+1 from overflowing unsigned char (the segments_left field), but does not prevent the computed hdrlen from overflowing __u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not fit. Tighten the bound to (n + 1) > 127. This caps n at 126, giving hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly past the decompressed region (buf[0..2039]). No overlap. 127 segments is well beyond any realistic RPL deployment. |
| CVE-2026-63980 | In the Linux kernel, the following vulnerability has been resolved: net/handshake: Use spin_lock_bh for hn_lock nvmet_tcp_state_change(), a socket callback that runs in BH context, can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue() and tls_handshake_cancel(). handshake_req_cancel() acquires hn->hn_lock with plain spin_lock(). If a process-context thread on the same CPU holds hn->hn_lock when a softirq invokes the cancel path, the lock attempt deadlocks. This is the only caller that invokes tls_handshake_cancel() from BH context; every other consumer calls it from process context. Deferring the cancel to process context in the NVMe target is not straightforward: nvmet_tcp_schedule_release_queue() must call tls_handshake_cancel() atomically with its state transition to DISCONNECTING. If the cancel were deferred, the handshake completion callback could fire in the window before the cancel runs, observe the unexpected state, and return without dropping its kref on the queue. Reworking that interlock is considerably more invasive than hardening the handshake lock. Convert all hn->hn_lock acquisitions from spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is never taken with softirqs enabled. |
| CVE-2026-63976 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success l2cap_ecred_reconf_rsp() returns early on success without clearing chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp, l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a successful transaction to prevent the channel from matching subsequent responses with the recycled ident value. A remote attacker that completed a reconfiguration as the peer can replay a failure response with the stale ident, causing the kernel to match and destroy the already-established channel via l2cap_chan_del(chan, ECONNRESET). Clear chan->ident for all matching channels on success, and harden the failure path by using l2cap_chan_hold_unless_zero() consistent with other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident). |
| CVE-2026-63975 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp If dcid is received for an already-assigned destination CID the spec requires that both channels to be discarded, but calling l2cap_chan_del may invalidate the tmp cursor created by list_for_each_entry_safe and in fact it is the wrong procedure as the chan->dcid may be assigned previously it really needs to be disconnected. Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so instead schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. |
| CVE-2026-63974 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close Since hci_dev_close_sync() can now be called during the reset path, we should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts while the hdev workqueue is being drained. |
| CVE-2026-63973 | In the Linux kernel, the following vulnerability has been resolved: net: mana: Add NULL guards in teardown path to prevent panic on attach failure When queue allocation fails partway through, the error cleanup frees and NULLs apc->tx_qp and apc->rxqs. Multiple teardown paths such as mana_remove(), mana_change_mtu() recovery, and internal error handling in mana_alloc_queues() can subsequently call into functions that dereference these pointers without NULL checks: - mana_chn_setxdp() dereferences apc->rxqs[0], causing a NULL pointer dereference panic (CR2: 0000000000000000 at mana_chn_setxdp+0x26). - mana_destroy_vport() iterates apc->rxqs without a NULL check. - mana_fence_rqs() iterates apc->rxqs without a NULL check. - mana_dealloc_queues() iterates apc->tx_qp without a NULL check. Add NULL guards for apc->rxqs in mana_fence_rqs(), mana_destroy_vport(), and before the mana_chn_setxdp() call. Add a NULL guard for apc->tx_qp in mana_dealloc_queues() to skip TX queue draining when TX queues were never allocated or already freed. |
| CVE-2026-63971 | In the Linux kernel, the following vulnerability has been resolved: sctp: fix race between sctp_wait_for_connect and peeloff sctp_wait_for_connect() drops and re-acquires the socket lock while waiting for the association to reach ESTABLISHED state. During this window, another thread can peeloff the association to a new socket via getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After re-acquiring the old socket lock, sctp_wait_for_connect() returns success without noticing the migration — the caller then accesses the association under the wrong lock in sctp_datamsg_from_user(). Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf() already has, returning an error if the association was migrated while we slept. |
| CVE-2026-63970 | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: bind uarg before filling zerocopy skb virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg before entering the send loop, but virtio_transport_alloc_skb() still fills the skb before it inherits that uarg. When fixed-buffer vectored zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach managed frags and return -EMSGSIZE. The rollback path call kfree_skb() to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so skb_release_data() falls through to ordinary frag unref. Pass the uarg into virtio_transport_alloc_skb() and bind it immediately before virtio_transport_fill_skb(). This keeps control or no-payload skbs untouched while ensuring success and rollback share one lifetime rule. |
| CVE-2026-63969 | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in rt6_fill_node() Sashiko reported this issue [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings) without waiting for RCU readers; rt->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &rt->fib6_siblings, causing a CPU stall. fib6_del_route() always WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |
| CVE-2026-63968 | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_select_path() Found while auditing the same pattern Sashiko reported in rt6_fill_node() [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings) without waiting for RCU readers; first->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &first->fib6_siblings as its terminator. fib6_purge_rt() always WRITE_ONCE()s first->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |
| CVE-2026-63967 | In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer The tagged FIFO path declares iio_buff on the stack with __aligned(8) but no initializer, but there is a hole in the structure, which will then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be copied, but the space between that and the timestamp are not initialized. Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan, but for the tagged path it only added the alignment qualifier and not the initializer :( Fix this by just zero-initializing the structure on the stack. |
| CVE-2026-63964 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: reject firmware images without a ':' record header do_flash() locates the first .cyacd record with p = strnchr(fw->data, fw->size, ':'); while (p < eof) { s = strnchr(p + 1, eof - p - 1, ':'); ... } If the firmware image contains no ':' byte, strnchr() returns NULL. NULL compares less than the valid kernel pointer eof, so the loop body runs and strnchr() is called with p + 1 == (void *)1 and a length of roughly (unsigned long)eof, causing a wonderful crash. The not_signed_fw fallthrough earlier in do_flash() and the chip-state branches in ccg_fw_update_needed() allow an unsigned blob to reach this loop, so a root user who can place a crafted file under /lib/firmware and write the do_flash sysfs attribute can trigger the oops. Bail out with -EINVAL when the initial strnchr() returns NULL. |
| CVE-2026-63961 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: validate count before reading Status Update VDO A broken/malicious device can send the incorrect count for a status update VDO, which will cause the kernel to read uninitialized stack data and send it off elsewhere. Fix this up by correctly verifying the count for the update object. |
| CVE-2026-63960 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer() wcove_read_rx_buffer() copies the PD RX FIFO into the caller's struct pd_message with for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i); which has two problems: USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed). The byte count latched in RXINFO is the number of bytes the port partner put on the wire, so a malicious partner that transmits a 31-byte frame can drive the loop one byte past the destination if the WCOVE BMC receiver does not enforce the PD object-count limit in hardware. The existing FIXME flagged this as unverified. Independently, regmap_read() takes an unsigned int * and stores a full unsigned int at the destination. Passing the byte pointer msg + i means each iteration writes four bytes; the high three are zero (val_bits is 8) and are normally overwritten by the next iteration, but the final iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration already writes three zero bytes past msg, which sits on the IRQ thread's stack in wcove_typec_irq(). Clamp the loop to sizeof(struct pd_message) and read each register into a local before storing only its low byte, so the copy can never exceed the destination regardless of what RXINFO reports. |
| CVE-2026-63959 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT A broken/malicious port can transmit a CRC-valid frame whose header advertises up to seven data objects but whose body carries fewer than that. Check for this, and rightfully reject the message, instead of reading from uninitialized stack memory. |
| CVE-2026-63958 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_connector_change() The connector number in a UCSI CCI notification is a 7-bit field supplied by the PPM. ucsi_connector_change() uses it to index the ucsi->connector[] array without checking it against the number of connectors the PPM reported at init time, so a buggy or malicious PPM (EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 / glink transports) can drive schedule_work() on memory past the end of the array. Reject connector numbers that are zero or exceed cap.num_connectors before dereferencing the array. |
| CVE-2026-63957 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: safe_serial: fix memory corruption with small endpoint Make sure that the bulk-out buffer size is at least eight bytes to avoid user-controlled slab corruption in "safe" mode should a malicious device report a smaller size. |
| CVE-2026-63956 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: fix memory corruption with small endpoint Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size. |
| CVE-2026-63954 | In the Linux kernel, the following vulnerability has been resolved: hpfs: fix a crash if hpfs_map_dnode_bitmap fails If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on uninitialized quad buffer head, causing a crash. |
| CVE-2026-63952 | In the Linux kernel, the following vulnerability has been resolved: memfd: deny writeable mappings when implying SEAL_WRITE When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the implied seal is set after the check that makes sure the memfd can not have any writable mappings. This means one can use SEAL_EXEC to apply SEAL_WRITE while having writeable mappings. This breaks the contract that SEAL_WRITE provides and can be used by an attacker to pass a memfd that appears to be write sealed but can still be modified arbitrarily. Fix this by adding the implied seals before the call for mapping_deny_writable() is done. |
| CVE-2026-63949 | In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabled kernel this trips an out-of-bounds report and panics; on stock kernels it silently reads adjacent slab data and, if that byte happens to be '\n', the following count-- wraps ssize_t 0 to -1 and is then passed to kmemdup_nul(). linedisp_display() is reached from the message_store() sysfs callback (drivers/auxdisplay/line-display.c message attribute, mode 0644) and from the in-tree initial-message setup with count == -1, so the OOB path is only userspace-triggerable via zero-byte writes; vfs_write() does not short-circuit on count == 0 and kernfs_fop_write_iter() dispatches the store callback regardless. Guard the trailing-newline trim with a count check. The existing if (!count) block then takes the clear-display path unchanged. Affects every auxdisplay driver that registers via linedisp_register() / linedisp_attach(): ht16k33, max6959, img-ascii-lcd, seg-led-gpio. |
| CVE-2026-63948 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return. |
| CVE-2026-63947 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: fix missing length checks in hidp_input_report() hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic with skb_pull_data() calls. skb_pull_data() returns NULL if the requested bytes are not present, eliminating the need for a manual size variable and the separate skb->len guard. |
| CVE-2026-63946 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix UAF in iso_recv_frame iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock before using sk, with no reference held. A concurrent iso_sock_kill() can free sk in that window, causing use-after-free on sk->sk_state and sock_queue_rcv_skb(). Fix by replacing the bare pointer read with iso_sock_hold(conn), which calls sock_hold() while the spinlock is held, atomically elevating the refcount before the lock drops. Add a drop_put label so sock_put() is called on all exit paths where the hold succeeded. |
| CVE-2026-63945 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock iso_sock_close() calls iso_sock_clear_timer() before acquiring lock_sock(sk). iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the socket lock held: if (!iso_pi(sk)->conn) return; cancel_delayed_work(&iso_pi(sk)->conn->timeout_work); Concurrently, iso_conn_del() executes under lock_sock(sk) and calls iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in the final reference to the connection being dropped: CPU0 CPU1 ---- ---- iso_sock_clear_timer() if (conn != NULL) ... lock_sock(sk) iso_chan_del() iso_pi(sk)->conn = NULL cancel_delayed_work(conn) /* NULL deref or UAF */ iso_pi(sk)->conn is not stable across the unlock window, causing a NULL pointer dereference or use-after-free. Serialize iso_sock_clear_timer() with the socket lock by moving it inside lock_sock()/release_sock(), matching the pattern used in iso_conn_del() and all other call sites. |
| CVE-2026-63944 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was obtained from an RCU-protected iteration over hdev->conn_hash.list and is not valid once these locks are dropped. A concurrent disconnect can free the hci_conn between the unlock and the dereference, causing a use-after-free read. The cancellation mechanism in hci_conn_del() cannot prevent this because hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL); While hci_conn_del() dequeues with data=conn: hci_cmd_sync_dequeue(hdev, NULL, conn, NULL); Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never matches, and the pending work item is not cancelled. Fix this by saving conn->conn_timeout into a local variable while the locks are still held, so the stale conn pointer is never dereferenced after unlock. This is the same class of bug as the one fixed by commit 035c25007c9e ("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which addressed the identical pattern in a different function. This vulnerability was identified using 0sec.ai, an open-source automated security auditing platform (https://github.com/0sec-labs). |
| CVE-2026-63943 | In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length. |
| CVE-2026-63942 | In the Linux kernel, the following vulnerability has been resolved: parport: Fix race between port and client registration The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base, > if (!p) > goto out3; > > - base_res = request_region(base, 3, p->name); > + base_res = NULL; > if (!base_res) > goto out4; > and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc done for a few seconds. In the long term I think port registration should be changed to put the call to device_add() inside parport_announce_port(), but since the latter currently cannot fail this will require changing all port drivers. For now, add a flag to indicate whether a port has been "announced" and only try to attach client drivers to ports when the flag is set. |
| CVE-2026-63940 | In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Ignore Port I/O requests of length '0' Explicitly ignore Port I/O requests of length '0' (or count '0'), so that setting up the software scratch area (and other code) doesn't have to worry about underflowing the length, and to allow for WARNing on trying to configure the scratch area with len==0. |
| CVE-2026-63934 | In the Linux kernel, the following vulnerability has been resolved: iio: gyro: itg3200: fix i2c read into the wrong stack location itg3200_read_all_channels() takes `__be16 *buf' as a parameter and fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the parameter (a pointer), `&buf' is the address of the local pointer slot on the stack of itg3200_read_all_channels(), not the address of the caller's scan buffer. The (char *) cast hides the type mismatch. i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16) = 8 bytes into the parameter's stack slot, which is discarded when the function returns. The caller's scan buffer in itg3200_trigger_handler() is never written to, so iio_push_to_buffers_with_timestamp() pushes uninitialised stack contents to userspace via /dev/iio:deviceX every scan -- both a functional bug (no actual gyroscope or temperature data is delivered through the triggered buffer) and an information leak. The non-buffered read_raw() path is unaffected: it goes through itg3200_read_reg_s16() which uses `&out' on a local s16 value, where that is correct. Drop the spurious `&' so the i2c read writes into the caller's buffer. |
| CVE-2026-63933 | In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16260: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. |
| CVE-2026-63931 | In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: fix division by zero in write_raw Add a zero check for val2 before using it as a divisor when setting the sampling frequency. A user writing a zero fractional part to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. |
| CVE-2026-63930 | In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: fix use-after-free in error path In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code was using list_for_each_entry() to iterate through buffers while calling iio_buffer_put() which can free the current buffer if refcount drops to 0. The list_for_each_entry() loop macro then evaluates buf->head.next to continue iteration, accessing the freed buffer. Fix this by using list_for_each_entry_safe(). |
| CVE-2026-63928 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: omninet: fix memory corruption with small endpoint Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected. |
| CVE-2026-63927 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix use after free in debug code We're not allowed to dereference "urb" after calling usb_hcd_giveback_urb() so save the urb->status ahead of time. |
| CVE-2026-63926 | In the Linux kernel, the following vulnerability has been resolved: bpf: sockmap: fix tail fragment offset in bpf_msg_push_data When bpf_msg_push_data() inserts data in the middle of a scatterlist entry, it splits the original entry into a left fragment and a right fragment. The right fragment offset is page-local, but the code advances it with `start`, which is the message-global insertion point. For inserts into a non-first SG entry, this over-advances the offset and leaves the split layout inconsistent. Advance the right fragment offset by the fragment-local delta, `start - offset`, which matches the length removed from the front of the original entry. |
| CVE-2026-63925 | In the Linux kernel, the following vulnerability has been resolved: macsec: fix replay protection at XPN lower-PN wrap In macsec_post_decrypt(), when pn is U32_MAX, pn + 1 overflows u32 to 0 and the first branch never fires. If next_pn_halves.lower is also in the upper half, pn_same_half(pn, lower) is true and the XPN else-if does not fire either, leaving next_pn_halves unchanged. An attacker that captures the legitimate frame carrying pn == 0xFFFFFFFF on an XPN association can then replay it indefinitely, since lowest_pn never rises above the captured pn and macsec_decrypt() reconstructs the same IV. Extend the XPN else-if to also fire when pn + 1 wraps to 0, so receipt of pn == U32_MAX advances next_pn_halves to (upper + 1, 0). |
| CVE-2026-63924 | In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up. |
| CVE-2026-63922 | In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh after handling HAO option ip6_parse_tlv() caches skb_network_header(skb) in nh while walking IPv6 TLVs. ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can move the skb head and invalidate the cached network header pointer. Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs are parsed from the current skb head. This matches the existing pattern used in ip6_parse_tlv() after helpers that can modify skb header storage. |
| CVE-2026-63921 | In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate(). After patch 1/2 in this series, vti6_update() unlinks and relinks the tunnel through t->net. vti6_siocdevprivate() still uses dev_net(dev) for the collision lookup. For a tunnel moved through IFLA_NET_NS_FD, dev_net(dev) is the new netns, not t->net. SIOCCHGTUNNEL on a migrated tunnel then runs: net = dev_net(dev) /* migrated netns */ t = vti6_locate(net, &p1, false) /* misses target in t->net */ ... t = netdev_priv(dev) vti6_update(t, &p1, false) /* mutates t->net's hash */ A caller in the migrated netns picks params that match a tunnel in the creation netns. The lookup in dev_net(dev) finds nothing. vti6_update() prepends the migrated tunnel at the head of the creation netns hash bucket for those params. Later lookups in the creation netns resolve to the migrated device. xfrm receive delivers the matched packets through a device the caller controls. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts. Switch the SIOCCHGTUNNEL path on a non fallback device to use t->net for the lookup. The lookup now matches the netns vti6_update() operates on. Also add ns_capable(self->net->user_ns, CAP_NET_ADMIN) before the lookup. The check at the top of the case is against dev_net(dev)->user_ns, which after migration is the attacker's netns. A caller there can pick params absent from self->net, the lookup returns NULL, t becomes self, and vti6_update() inserts the device into the creation netns hash. The new check requires CAP_NET_ADMIN in the creation netns user_ns too. SIOCADDTUNNEL and SIOCCHGTUNNEL on the fallback device keep dev_net(dev), which equals init_net there. |
| CVE-2026-63920 | In the Linux kernel, the following vulnerability has been resolved: ipv6: validate extension header length before copying to cmsg ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR} cmsgs (and their IPV6_2292* legacy counterparts) by trusting the on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length. The length was validated only at parse time (ipv6_parse_hopopts(), etc.). An nftables payload-write expression can rewrite hdrlen after parsing and before the skb reaches recvmsg; the write itself is in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040 bytes from an 8-byte header. nftables is reachable from an unprivileged user namespace, so this is an unprivileged slab-out-of-bounds read: BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540 put_cmsg+0x3ac/0x540 udpv6_recvmsg+0xca0/0x1250 sock_recvmsg+0xdf/0x190 ____sys_recvmsg+0x1b1/0x620 Add ipv6_get_exthdr_len() which validates that at least two bytes are accessible before reading the hdrlen field, then checks the computed length against skb_tail_pointer(skb), returning 0 on failure. Extension headers are kept in the linear skb area by pskb_may_pull() during input, so skb_tail_pointer() is the correct bound. Use ipv6_get_exthdr_len() at all non-AH call sites: the five standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR) and the three standard cases in the extension-header walk loop (DSTOPTS, ROUTING, default). AH retains an inline bounds check because its length formula differs ((ptr[1]+2)<<2). The walk loop also gets a pre-read bounds check at the top to validate ptr before any case accesses ptr[0] or ptr[1]. When the walk loop detects a corrupted header, return from the function instead of continuing to process later socket options. |
| CVE-2026-63919 | In the Linux kernel, the following vulnerability has been resolved: xfrm: input: hold netns during deferred transport reinjection Transport-mode reinjection stores a struct net pointer in skb->cb and uses it later from xfrm_trans_reinject(). That pointer must stay valid until the deferred callback runs. Take a netns reference when queueing deferred reinjection work and drop it after the callback completes. Use maybe_get_net() so the queueing path does not revive a namespace that is already being torn down. This keeps the existing workqueue design and fixes the netns lifetime handling in one place for all users of xfrm_trans_queue_net(). |
| CVE-2026-63917 | In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_changelink(). ip netns add ns1 ip netns add ns2 ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7 ip -n ns1 link set vti6_test netns ns2 ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9 ip netns del ns2 ip netns del ns1 [ 132.495484] ------------[ cut here ]------------ [ 132.497609] kernel BUG at net/core/dev.c:12376! Commit 61220ab34948 ("vti6: Enable namespace changing") dropped NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then move through IFLA_NET_NS_FD. After the move dev_net(dev) points at the new netns while t->net stays at the creation netns. vti6_changelink() and vti6_update() still use dev_net(dev) and dev_net(t->dev). They unlink from one per netns hash and relink into another. The creation netns is left with a stale entry. cleanup_net() of that netns later walks freed memory. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts. |
| CVE-2026-63916 | In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix OOB write in wacom_hid_set_device_mode() wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE usage is always located in the first field (field[0]) of the feature report. However, a device can specify HID_DG_INPUTMODE in a different field. If HID_DG_INPUTMODE is in a field other than the first one and the first field has a report_count smaller than the usage_index of HID_DG_INPUTMODE, this leads to an out-of-bounds write to r->field[0]->value. Fix this by storing the field index of HID_DG_INPUTMODE in 'struct hid_data' during feature mapping. In wacom_hid_set_device_mode(), use this stored field index to access the correct field and add bounds checks to ensure both the field index and the value index are within valid ranges before writing. |
| CVE-2026-63915 | In the Linux kernel, the following vulnerability has been resolved: nfc: hci: fix out-of-bounds read in HCP header parsing Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read packet->header from skb->data at function entry without first checking that the buffer holds at least one byte. A malicious NFC peer can send a 0-byte HCP frame that passes through the SHDLC layer and reaches these functions, causing an out-of-bounds heap read of packet->header. The same 0-byte frame, if queued as a non-final fragment, also causes the reassembly loop to underflow msg_len to UINT_MAX, triggering skb_over_panic() when the reassembled skb is written. Fix this by adding a pskb_may_pull() check at the entry of each function before packet->header is first accessed. The existing pskb_may_pull() checks before the reassembled hcp_skb is cast to struct hcp_packet remain in place to guard the 2-byte HCP message header. |
| CVE-2026-63914 | In the Linux kernel, the following vulnerability has been resolved: xfrm: route MIGRATE notifications to caller's netns xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate() in net/key/af_key.c both hardcode &init_net for the multicast that announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE. XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the rest of the xfrm/af_key netlink path was made netns-aware in 2008. The other 14 multicast paths in xfrm_user.c route their event using xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path was missed. Two consequences of the init_net hardcoding: 1. The notification (selector, old/new endpoint addresses, and the km_address) is delivered to listeners on init_net's XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on the issuing netns. An IKE daemon running in init_net therefore receives migration notifications originating from any other netns on the host. 2. An IKE daemon running inside a non-init netns and subscribed to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the notification of its own migration. IKEv2 MOBIKE / address-update handling inside a netns is silently broken. Thread struct net through km_migrate() and the xfrm_mgr.migrate function pointer, drop the &init_net override in xfrm_send_migrate() and pfkey_send_migrate(), and pass the caller's net (already in scope in xfrm_migrate() via sock_net(skb->sk)) all the way down. struct xfrm_mgr is in-tree only and not exported as a stable API, so the function-pointer signature change is internal. pfkey_broadcast() is already netns-aware via net_generic(net, pfkey_net_id) since the pernet conversion. The five other pfkey_broadcast() callers in af_key.c already pass xs_net(x), sock_net(sk) or a per-netns net, so this only removes the &init_net outlier. |
| CVE-2026-63913 | In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check An unintended behavior in the TCP conntrack state machine allows a connection to be forced into the CLOSE state using an RST packet with an invalid sequence number. Specifically, after a SYN packet is observed, an RST with an invalid SEQ can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of whether the RST corresponds to the expected reply direction. The relevant code path assumes the RST is a response to an outgoing SYN, but does not validate packet direction or ensure that a matching SYN was actually sent in the opposite direction. As a result, a crafted packet sequence consisting of a SYN followed by an invalid-sequence RST can prematurely terminate an active NAT entry. This makes connection teardown easier than intended. So, tighten the state transition logic to ensure that RST-triggered CLOSE transitions only occur when the RST is a valid response to a previously observed SYN in the correct direction. |
| CVE-2026-63912 | In the Linux kernel, the following vulnerability has been resolved: xfrm: esp: restore combined single-frag length gate The ESP out-of-place fast path appends the trailer in esp_output_head() before esp_output_tail() allocates the destination page frag. The head-side gate currently checks skb->data_len and tailen separately, but the tail code allocates a single destination frag from the combined post-trailer skb->data_len. Reject the page-frag fast path when the combined aligned length exceeds a page. Otherwise skb_page_frag_refill() may fall back to a single page while the destination sg still spans the combined skb->data_len. Restore this combined-length page gate for both IPv4 and IPv6. |
| CVE-2026-63909 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops Commit d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") introduced a transposed bounds check: if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE) Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates to `aces_size < 0`. Because `aces_size` is always non-negative, this check becomes dead code and never breaks the loop. Worse, that commit removed the old 4-byte guard, meaning the loop now reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation during subsequent SMB2_CREATE operations. Fix this by properly transposing the comparison to require at least 16 bytes (8-byte offset + 8-byte SID base), matching the correct form used in smb_inherit_dacl(). |
| CVE-2026-63908 | In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=. |
| CVE-2026-63906 | In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Fix use-after-free in omap2430_probe() In omap2430_probe(), of_node_put(np) is called prematurely before the last access to np, leading to a use-after-free if the node's reference count drops to zero. Move the of_node_put() calls after the last use of np in both the success and error paths. |
| CVE-2026-63905 | In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: Fix use after free bug in vudc_remove due to race condition This patch follows up Zheng Wang's 2023 report of a use-after-free in vudc_remove(). The original thread stalled on Shuah Khan's request for runtime testing of the unplug/unbind path. This patch supplies that testing and keeps Zheng's original fix shape. In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer(). usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer(). vudc_remove() can then free the containing struct vudc while the timer is still pending or executing. KASAN confirms the race on an unpatched x86_64 QEMU guest with CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop that repeatedly writes a socket fd to usbip_sockfd, closes the socket pair, and unbinds/rebinds usbip-vudc.0: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0 Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239 Allocated by task 239: vudc_probe+0x4d/0xaa0 Freed by task 239: kfree+0x18f/0x520 device_release_driver_internal+0x388/0x540 unbind_store+0xd9/0x100 This lands in the timer core rather than v_timer() itself because the embedded timer_list is being walked after its containing struct vudc has already been freed. The underlying lifetime bug is the same one Zheng reported. With v_stop_timer() called from vudc_remove() and the timer deleted synchronously, the same harness completed 5000 bind/unbind iterations with no KASAN report. |
| CVE-2026-63904 | In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: check URB actual_length for interrupt-IN notifications USBTMC devices can use an optional interrupt endpoint for notification messages. These typically contain two-byte headers indicating the payload format, but the driver does not check if these headers are present before accessing the data buffers. In cases where the URB actual_length is not enough to fit these headers, the driver will either cause an out-of-bounds read, or consume stale leftover data from a previous notification. Fix by checking if actual_data contains enough bytes for the headers, otherwise resubmit URB to the interrupt endpoint. |
| CVE-2026-63903 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: belkin_sa: validate interrupt status length The Belkin interrupt callback treats interrupt data as a four-byte status report and reads LSR/MSR fields at offsets 2 and 3. The interrupt-in buffer length is derived from endpoint wMaxPacketSize, and short interrupt transfers may complete successfully with a smaller actual_length. Check the completed interrupt packet length before parsing status fields so short interrupt endpoints and short successful packets are ignored instead of causing out-of-bounds or stale status-byte reads. KASAN report as below: BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback() Read of size 1 Call trace: belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202) __usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630) dummy_timer() (?:?) |
| CVE-2026-63902 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: validate interrupt packet headers cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() [ johan: use constants in header length sanity checks ] |
| CVE-2026-63901 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix memory corruption with small endpoints Add the missing bulk-out buffer size sanity checks to avoid out-of-bounds memory accesses or slab corruption should a malicious device report smaller buffers than expected. |
| CVE-2026-63900 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan: fix missing indat transfer sanity check Add the missing sanity check on the size of usa49wg indat transfers to avoid parsing stale or uninitialised slab data. |
| CVE-2026-63899 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: mxuport: fix memory corruption with small endpoint Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size. |
| CVE-2026-63898 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix memory corruption with small endpoint The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected. |
| CVE-2026-63897 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix missing interrupt-in transfer sanity check Add the missing sanity check on the size of interrupt-in transfers to avoid parsing stale or uninitialised slab data (and leaking it to user space). |
| CVE-2026-63896 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling The WebUSB GET_URL handler in composite_setup() narrows landing_page_length to fit the host-supplied wLength using landing_page_length = w_length - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset; If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the unsigned subtraction wraps, and the subsequent memcpy(url_descriptor->URL, cdev->landing_page + landing_page_offset, landing_page_length - landing_page_offset); ends up copying close to UINT_MAX bytes from cdev->landing_page into cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the memcpy as a 4294967293-byte field-spanning write into url_descriptor->URL (size 252). A USB host can reach this from a single SETUP packet against any gadget that has webusb/use=1 and a landingPage configured. Handle the small-wLength case before the math: when the host requested fewer bytes than the URL descriptor header, only the header is meaningful and no URL bytes need to be copied. Setting landing_page_length to landing_page_offset makes the existing memcpy a no-op and leaves the descriptor returned to the host unchanged for all larger wLength values. |
| CVE-2026-63895 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: copy only received bytes on short ep0 read ffs_ep0_read() allocates its control-OUT data buffer with kmalloc() (not kzalloc) at the Length value from the Setup packet, then copies that full len to userspace regardless of how many bytes were actually received: data = kmalloc(len, GFP_KERNEL); ... ret = __ffs_ep0_queue_wait(ffs, data, len); if ((ret > 0) && (copy_to_user(buf, data, len))) ret = -EFAULT; __ffs_ep0_queue_wait() returns req->actual, which on a short control OUT transfer is strictly less than len. The copy_to_user() call still copies len bytes, so on a short OUT the last (len - ret) bytes of the kmalloc() buffer -- uninitialised slab residue -- are delivered to the FunctionFS daemon. Short ep0 OUT completions are specified USB control-transfer behavior and are produced by in-tree UDCs: * dwc2 continues on req->actual < req->length for ep0 DATA OUT (short-not-ok is the only ep0-OUT stall path). * aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket. * renesas_usbf logs "ep0 short packet" and completes the request. * dwc3 stalls on short IN but not on short OUT. A short ep0 OUT is therefore not evidence of a broken UDC; it is a normal condition f_fs has to cope with. The sibling gadgetfs implementation in drivers/usb/gadget/legacy/inode.c already does this correctly via min(len, dev->req->actual) before copy_to_user(). This patch brings f_fs.c to the same safe pattern rather than trimming at a defensive layer. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace. Linux host stacks normally reject short-wLength control OUTs before they reach the gadget, so reproducing this required a build that bypasses that host-side check. With the bypass in place, a 1-byte payload on a 64-byte Setup produces 63 bytes of non-canary slab residue in the daemon's read buffer. Fix by copying only ret (actually received) bytes to userspace. |
| CVE-2026-63893 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Reject u32 wrap in tb_property_entry_valid() entry->value is u32 and entry->length is u16; the sum is performed in u32 and wraps. A malicious XDomain peer can pick value = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0 and passes the > block_len check. tb_property_parse() then passes entry->value to parse_dwdata() as a dword offset into the property block, reading attacker-directed memory far past the allocation. For TEXT-typed entries with the "deviceid" or "vendorid" keys this lands in xd->device_name / xd->vendor_name and is readable back via the per-XDomain device_name / vendor_name sysfs attributes; the leak is NUL-bounded (kstrdup() stops at the first zero byte) and untargeted (the attacker picks a delta, not an absolute address). DATA-typed entries are parsed into property->value.data but not generically surfaced to userspace. Use check_add_overflow() so a wrapped sum is rejected. |
| CVE-2026-63892 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow On the non-root path, __tb_property_parse_dir() takes dir_len from entry->length (u16 widened to size_t). Two distinct OOB conditions follow when entry->length < 4: 1. The non-root path begins with kmemdup(&block[dir_offset], sizeof(*dir->uuid), ...) which always reads 4 dwords from dir_offset. tb_property_entry_valid() only enforces dir_offset + entry->length <= block_len, so a crafted entry with dir_offset close to the end of the property block and entry->length in 0..3 passes that gate but lets the UUID copy run off the block (e.g. dir_offset = 497, dir_len = 3 in a 500-dword block reads block[497..501]). 2. After the kmemdup, content_len = dir_len - 4 underflows size_t to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry walk runs OOB on each iteration until an entry fails validation or the kernel oopses on an unmapped page. Reject dir_len < 4 on the non-root path *before* the UUID kmemdup, which closes both holes. Also move INIT_LIST_HEAD(&dir->properties) up to immediately after the dir allocation so the new error-return path (and the existing uuid-alloc failure path) calling tb_property_free_dir() sees a walkable list rather than the zero-initialized NULL next/prev that list_for_each_entry_safe() would oops on. |
| CVE-2026-63891 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Cap recursion depth in __tb_property_parse_dir() A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line. |
| CVE-2026-63890 | In the Linux kernel, the following vulnerability has been resolved: scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the descriptor cursor by an attacker-supplied fip_dlen without ever requiring dlen >= sizeof(struct fip_desc) in the default branch. The named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor (fip_dtype >= 128, which the standard requires receivers to silently ignore) skipped that check entirely. An unauthenticated L2 peer on the FCoE control VLAN could hang fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely by emitting one FIP CVL frame whose single descriptor had fip_dtype == FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes per iteration and the loop condition rlen >= sizeof(*desc) stayed true forever, blocking every subsequent FIP frame on that controller. Tighten the outer dlen guard to also reject dlen < sizeof(struct fip_desc), so a malformed descriptor whose length cannot even cover the descriptor header is rejected before the switch. This is the same lower-bound the named cases already apply and is the minimum scope that closes the loop. |
| CVE-2026-63889 | In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32 An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in the generic FC transport. This is not a local userspace or IP network path; the attacker must be able to inject fabric traffic, for example as a compromised switch or fabric controller, or as a same-zone N_Port on a fabric that permits source spoofing. The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop counter against the 32-bit on-wire pname_count field, and did not bound pname_count by the descriptor body already validated by the TLV walker. A pname_count of 256 therefore wraps the counter and keeps the loop condition true indefinitely. Factor the shared pname_list[] walk into one helper, widen the counter to u32, and clamp pname_count against the entries that fit in the descriptor body before iterating. |
| CVE-2026-63888 | In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd() Two latent bugs in the Text-phase handler, both present since the original LIO integration in commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1"): 1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the end of the text_in allocation. KASAN reproduces this directly on the unpatched mainline tree as slab-out-of-bounds in crc32c() called from the Text PDU path. The OOB bytes feed crc32c() and are then compared against the initiator-supplied checksum, so the value does not flow back to the attacker, but the kernel does read past the buffer on every Text PDU with DataDigest=CRC32C. Fix by passing the actual padded payload length (ALIGN(payload_length, 4)) that was used for the kzalloc(). 2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest drop. On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler silently drops the PDU and lets the initiator plug the CmdSN gap: kfree(text_in); return 0; cmd->text_in_ptr still points at the freed buffer. The next Text Request on the same ITT re-enters iscsit_setup_text_cmd(), which unconditionally does kfree(cmd->text_in_ptr); cmd->text_in_ptr = NULL; freeing the same pointer a second time. Session teardown via iscsit_release_cmd() has the same shape and hits the same double-free if the connection is dropped before a second Text Request arrives. On an unmodified mainline tree the bug-1 CRC overread fires first on the initial valid Text Request and perturbs the subsequent state, so #4 was isolated by building a kernel with only the bug-1 hunk of this patch applied plus temporary printk() observability around the three relevant kfree() sites. The observability prints are not part of this patch. On that build, a three-PDU Text Request sequence after login produces two back-to-back splats: BUG: KASAN: double-free in iscsit_setup_text_cmd+0x?? BUG: KASAN: double-free in iscsit_release_cmd+0x?? showing the same pointer freed in the ERL>0 drop path and again in iscsit_setup_text_cmd() (next Text Request on the same ITT) and once more in iscsit_release_cmd() (session teardown). On distro kernels with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free becomes a remote kernel BUG(); on non-hardened kernels it corrupts the slab freelist. Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop path. With both hunks applied #4 is directly observable on the stock tree without observability printks; fixing bug-1 alone would mask #4 less, not more, so the hunks are submitted together. Both fixes are one-liners. The Text PDU state machine is unchanged and the wire protocol is unaffected. |
| CVE-2026-63887 | In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.) |
| CVE-2026-63886 | In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this. |
| CVE-2026-63884 | In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential UAF in TTM object purge TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer. A user reported hitting the following bug under heavy use on DG2: [26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI [26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy) [26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025 [26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915] [26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78 [26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282 [26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000 [26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff [26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000 [26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0 [26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0 [26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000 [26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0 [26620.095612] PKRU: 55555554 [26620.095612] Call Trace: [26620.095615] <TASK> [26620.095615] i915_ttm_move+0x2b9/0x420 [i915] [26620.095642] ? ttm_tt_init+0x65/0x80 [ttm] [26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915] [26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm] [26620.095669] ttm_bo_evict+0x100/0x150 [ttm] [26620.095671] ? preempt_count_add+0x64/0xa0 [26620.095673] ? _raw_spin_lock+0xe/0x30 [26620.095675] ? _raw_spin_unlock+0xd/0x30 [26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915] [26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm] [26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm] [26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm] [26620.095709] ? init_object+0x62/0xd0 [26620.095712] ttm_bo_validate+0x7a/0x180 [ttm] [26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915] [26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915] [26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095786] ? alloc_debug_processing+0xd0/0x100 [26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915] [26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915] [26620.095848] i915_vma_pin_ww+0x706/0x980 [i915] [26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095904] eb_validate_vmas+0x170/0xa00 [i915] [26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915] [26620.095953] ? alloc_debug_processing+0xd0/0x100 [26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.095977] ? __wake_up_sync_key+0x32/0x50 [26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.096001] ? __slab_alloc.isra.0+0x67/0xc0 [26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915] Results from decode_stacktrace.sh pointed to dereference of a file pointer field of a i915 TTM page vector container associated with an object being purged on eviction. That path is taken when the object is marked as no longer needed. Code analysis revealed a possibility of the i915 TTM page vector container being replaced with a new instance inside a function that purges content of the object, should it be still busy. That function is called, indirectly via a more general function that changes the object's placement and caching policy, ---truncated--- |
| CVE-2026-63883 | In the Linux kernel, the following vulnerability has been resolved: serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ When uart_flush_buffer() runs before the DMA completion IRQ is delivered, the following race can occur (all steps serialized by uart_port_lock): 1. DMA starts: tx_remaining = N, kfifo contains N bytes 2. DMA completes in hardware; IRQ is pending but not yet delivered 3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(), making kfifo_len() = 0 while tx_remaining remains N 4. uart_flush_buffer() releases the port lock 5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls uart_xmit_advance(uport, tx_remaining) on an empty kfifo uart_xmit_advance() increments kfifo->out by tx_remaining. Since kfifo_reset() already set both in and out to 0, out wraps past in, causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next start_tx_dma() call then submits a DMA transfer of stale buffer data. Fix this by snapshotting kfifo_len() at the start of handle_tx_dma() and skipping uart_xmit_advance() when fifo_len < tx_remaining, which indicates the kfifo was reset by a preceding flush. |
| CVE-2026-63882 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL pointer bug in svm_range_set_attr The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm before calling kfd_ioctl_svm. (cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4) |
| CVE-2026-63881 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger get_queue_ids() computes array_size = num_queues * sizeof(uint32_t), which could overflow on 32-bit size_t build. using array_size() instead, it saturates to SIZE_MAX on overflow. (cherry picked from commit 2d57a0475f085c08b49312dfd8edcb461845f285) |
| CVE-2026-63877 | In the Linux kernel, the following vulnerability has been resolved: serial: dz: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a90 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]--- -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because the DZ device is fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the zs driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Conversely only starting the console port so late lets the reset code fully utilise our delay handlers, so switch from udelay() to fsleep() for transmitter draining so as to avoid busy-waiting for an excessive amount of time. |
| CVE-2026-63876 | In the Linux kernel, the following vulnerability has been resolved: serial: zs: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d60 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c03 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally. |
| CVE-2026-63875 | In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Flush walk cache when unsharing PMD tables When huge_pmd_unshare() is called to unshare a PMD table, the tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true but the aarch64 tlb_flush() only checked tlb->freed_tables to determine whether to use TLBF_NONE (vae1is, invalidates walk cache) or TLBF_NOWALKCACHE (vale1is, leaf-only). This caused the stale PMD page table entry to remain in the walk cache after unshare, potentially leading to incorrect page table walks. Fix by including unshared_tables in the check, so that when unsharing tables, TLBF_NONE is used and the walk cache is properly invalidated. Here is the detailed distinction between vae1is and vale1is: | Instruction Combination | Actual Invalidation Scope | | ------------------------ | --------------------------------------------------| | `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) | | `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 | | `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) | | `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | |
| CVE-2026-63872 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| CVE-2026-63871 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst, iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock(). These fields may be modified concurrently by connect() or setsockopt() on the same socket, resulting in data-races reported by KCSAN. Fix this by snapshotting the required fields under lock_sock() before calling hci_get_route(). BUG: KCSAN: data-race in memcmp+0x45/0xb0 race at unknown origin, with read to 0xffff8880122135cf of 1 bytes by task 333 on cpu 1: memcmp+0x45/0xb0 hci_get_route+0x27e/0x490 iso_connect_cis+0x4c/0xa10 iso_sock_connect+0x60e/0xb30 __sys_connect_file+0xbd/0xe0 __sys_connect+0xe0/0x110 __x64_sys_connect+0x40/0x50 x64_sys_call+0xcad/0x1c60 do_syscall_64+0x133/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| CVE-2026-63870 | In the Linux kernel, the following vulnerability has been resolved: ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit() The aoe driver (or similar) generates a non-IPv6 packet (e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit() on a 6LoWPAN interface (configured by the user or test case). Since the packet is not IPv6, the 6LoWPAN header_ops->create function (lowpan_header_create or header_create) returns early without initializing the lowpan_addr_info structure in the skb headroom. In the transmit function (lowpan_xmit), the driver calls lowpan_header (or setup_header) which unconditionally copies and uses the lowpan_addr_info from the headroom, which contains uninitialized data. Fix this by dropping non IPv6 packets. A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit(). |
| CVE-2026-63869 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap When parsing the radiotap header of an injected frame, ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA value directly as a shift count: info->control.antennas |= BIT(*iterator.this_arg); *iterator.this_arg is an 8-bit value taken straight from the frame supplied by userspace, so BIT() can be asked to shift by up to 255. That is undefined behaviour on the unsigned long and is reported by UBSAN: UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30 shift exponent 235 is too large for 64-bit type 'unsigned long' Call Trace: ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174 ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451 ... packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109 info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antenna indices 0 and 1 can ever be represented. Ignore any larger value instead of shifting out of bounds. |
| CVE-2026-63868 | In the Linux kernel, the following vulnerability has been resolved: net: garp: fix unsigned integer underflow in garp_pdu_parse_attr The receive-side GARP attribute parser computes dlen with reversed operands: dlen = sizeof(*ga) - ga->len; ga->len is the on-wire attribute length and includes the GARP attribute header. For normal attributes with data, ga->len is larger than sizeof(*ga), so the subtraction underflows in unsigned arithmetic. The resulting value is later passed to garp_attr_lookup(), whose length argument is u8. After truncation, the parsed data length usually no longer matches the length stored for locally registered attributes, so received Join/Leave events are ignored. This breaks the GARP receive path for common attributes, such as GVRP VLAN registration attributes. Compute the data length as the attribute length minus the header length. |
| CVE-2026-63867 | In the Linux kernel, the following vulnerability has been resolved: mptcp: close TOCTOU race while computing rcv_wnd The MPTCP output path access locklessly the MPTCP-level ack_seq in multiple times, using possibly different values for the data_ack in the DSS option and to compute the announced rcv wnd for the same packet. Refactor the cote to avoid inconsistencies which may confuse the peer. Also ensure that the MPTCP level rcv wnd is updated only when the egress packet actually contains a DSS ack. |
| CVE-2026-63836 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: avoid divide-by-zero for dec_cwnd The cwnd is always MSS <= cwnd <= 0x20000000. But the calculation in batadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics. ((mss * 8) ** 2) / (cwnd * 8) In case cwnd is actually 0x20000000, it will be shifted by 3 bit to the left end up at 0x100000000 or U32_MAX + 1. It will therefore wrap around and be 0 - resulting in: ((mss * 8) ** 2) / 0 This is of course invalid and cannot be calculated. The calculation should must be simplified to avoid this overflow: (mss ** 2) * 8 / cwnd It will keep the precision enhancement from the scaling (by 8) but avoid the overflow in the divisor. In theory, there could still be an overflow in the dividend. It is at the moment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not an imminent problem. But allowing it to use the whole u32 bit range, would mean that it can still use up to 67 bits. To keep this calculation safe for 32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits - or in other words: must never be larger than 16383. |
| CVE-2026-63835 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: v: prevent OGM aggregation on disabled hardif When an interface gets disabled, the worker is correctly disabled by batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable(). In this process, the skb aggr_list is also freed. But batadv_v_ogm_send_meshif() can still queue new skbs (via batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all cores can no longer find the RCU protected list of hard interfaces. These queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work. The batadv_v_ogm_iface_disable() function must block batadv_v_ogm_queue_on_if() to avoid leak of skbs. |
| CVE-2026-63834 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: restrict number of unacked list entries When the unacked_list is unbound, an attacker could send messages with small lengths and appropriated seqno + gaps to force the receiver to allocate more and more unacked_list entries. And the end either causing an out-of-memory situation or increase the management overhead for the (large) list that significant portions of CPU cycles are wasted in searching through the list. When limiting the list to a specific number, it is important to still correctly add a new entry to the list. But if the list became larger than the limit, the last entry of the list (with the highest seqno) must be dropped to still allow the earlier seqnos to finish and therefore to continue the process. Otherwise, the process might get stuck with too high seqnos which are not handled by batadv_tp_ack_unordered(). |
| CVE-2026-63833 | In the Linux kernel, the following vulnerability has been resolved: ntfs3: reject direct userspace writes to reserved $LX* xattrs NTFS3 uses $LXUID, $LXGID, $LXMOD and $LXDEV as internal WSL permission metadata and reloads them into i_uid, i_gid and i_mode from ntfs_get_wsl_perm(). Because the empty-prefix xattr handler also lets file owners call setxattr() on these names directly, an unprivileged writer on a writable ntfs3 mount can plant root ownership and S_ISUID on their own file and gain euid 0 after inode reload. Reject direct userspace writes to the reserved $LX* names. Internal ntfs3 metadata updates are unchanged because ntfs_save_wsl_perm() writes them via ntfs_set_ea() directly. [almaz.alexandrovich@paragon-software.com: added an additional check for non privileged users] |
| CVE-2026-63832 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: add wcid publish check in mt76_sta_add Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add to avoid reinitializing the wcid->poll_list. Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4. According to the corruption information, prev->next was changed to itself. wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2 wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b) wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3) slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192 list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040). mt76_wcid_add_poll+0x95/0xd0 [mt76] mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common] mt7925_rx_check+0xa7/0xc0 [mt7925_common] mt76_dma_rx_poll+0x50d/0x790 [mt76] mt792x_poll_rx+0x52/0xe0 [mt792x_lib] |
| CVE-2026-63831 | In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: add skb_cow_data() before in-place crypto llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(), llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform in-place cryptographic transformations on skb data. They build a scatterlist with sg_init_one() pointing into the skb's linear data area and then pass the same scatterlist as both src and dst to the crypto API (e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt). On the RX path, __ieee802154_rx_handle_packet() clones the received skb before handing it to each subscriber via ieee802154_subif_frame(). The cloned skb shares the same underlying data buffer via reference counting. When llsec_do_decrypt() subsequently modifies this shared buffer in place, it corrupts data that other clones -- potentially belonging to other sockets or subsystems -- still reference. On the TX path, similar data sharing can occur when an skb's head has been cloned (skb_cloned() returns true). The fix is to call skb_cow_data() before performing any in-place crypto operation. skb_cow_data() ensures that the skb's data area is not shared: if the skb head is cloned or the data spans multiple fragments, it copies the data into a private buffer that can be safely modified in place. This is the same pattern used by: - ESP (net/ipv4/esp4.c, net/ipv6/esp6.c) - MACsec (drivers/net/macsec.c) - WireGuard (drivers/net/wireguard/receive.c) - TIPC (net/tipc/crypto.c) Without this guard, in-place crypto on shared skb data leads to: - Silent data corruption of other skb clones - Use-after-free when the crypto API scatterwalk writes through a page that has already been freed by another clone's kfree_skb() - Kernel crashes under concurrent 802.15.4 traffic with security enabled (KASAN/KMSAN reports slab-use-after-free) Found by 0sec (https://0sec.ai) using automated source analysis. |
| CVE-2026-63830 | In the Linux kernel, the following vulnerability has been resolved: net: skmsg: preserve sg.copy across SG transforms The sk_msg sg.copy bitmap is part of the scatterlist entry ownership state. A set bit tells sk_msg_compute_data_pointers() not to expose the entry through writable BPF ctx->data. This protects entries backed by pages that are not private to the sk_msg, such as splice-backed file page-cache pages. Several sk_msg transform paths move, copy, split, or compact msg->sg.data[] entries without moving the matching sg.copy bit. This can make an externally backed entry arrive at a new slot with a clear copy bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable ctx->data and BPF stores can modify the original page cache. Keep sg.copy synchronized with sg.data[] whenever entries are transferred, shifted, split, or copied into a new sk_msg. Clear the bit when an entry is replaced by a newly allocated private page or freed. This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(), sk_msg_xfer(), and tls_split_open_record(), including the partial tail entry created during TLS open-record splitting. |
| CVE-2026-63829 | In the Linux kernel, the following vulnerability has been resolved: net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is skipped when the link netns is dev_net(dev), where the rtnl path already checked it. The other patches in this series use the same helper. Gate ipgre_changelink() and erspan_changelink() with it, at the top of the op before any attribute is parsed, because the parsers update live tunnel fields first. ipgre_netlink_parms() sets t->collect_md before ip_tunnel_changelink() runs. Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().") added the same check on the ioctl path. This adds it on RTM_NEWLINK. |
| CVE-2026-63828 | In the Linux kernel, the following vulnerability has been resolved: apparmor: mediate the implicit connect of TCP fast open sendmsg sendmsg()/sendto() with MSG_FASTOPEN is a combination of connect(2) and write(2): it opens the connection in the SYN. apparmor_socket_sendmsg() only checks AA_MAY_SEND, so a profile that grants send but denies connect lets a confined task open an outbound TCP/MPTCP connection that connect(2) would have refused, bypassing connect mediation. Mediate the implicit connect when MSG_FASTOPEN is set and a destination is supplied. Add it to apparmor_socket_sendmsg() (not the shared aa_sock_msg_perm() helper, which recvmsg also uses) and call aa_sk_perm() directly, mirroring the selinux and tomoyo fixes. sk_is_tcp() does not cover MPTCP fast open, so the SOCK_STREAM/IPPROTO_MPTCP arm is explicit. |
| CVE-2026-63827 | In the Linux kernel, the following vulnerability has been resolved: apparmor: fix use-after-free in rawdata dedup loop aa_replace_profiles() walks ns->rawdata_list to dedup the incoming policy blob against entries already attached to existing profiles. Per the kernel-doc on struct aa_loaddata, list membership does not hold a reference: profiles hold pcount, and when the last pcount drops, do_ploaddata_rmfs() is queued on a workqueue that takes ns->lock and removes the entry. Between dropping the last pcount and the workqueue running, an entry remains on the list with pcount == 0. aa_get_profile_loaddata() is an unconditional kref_get() on pcount, so when the dedup loop hits such an entry, refcount hardening reports refcount_t: addition on 0; use-after-free. inside aa_replace_profiles(), and the poisoned counter then trips "saturated" and "underflow" warnings on the subsequent uses of the same loaddata. Before commit a0b7091c4de4 ("apparmor: fix race on rawdata dereference") the dedup path used a get_unless_zero-style helper on a single counter, so the existing "if (tmp)" guard was meaningful. The split-refcount refactor introduced aa_get_profile_loaddata(), which has plain kref_get() semantics, and the guard quietly became a no-op. Introduce aa_get_profile_loaddata_not0(), matching the existing _not0 convention used by aa_get_profile_not0(), and use it for the rawdata_list dedup lookup so dying entries are skipped. Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu 24.04 + stress-ng 0.17.06: stress-ng --apparmor 1 --klog-check --timeout 60s Without this patch the three refcount_t warnings fire within a few seconds. With it the same 60 s run is clean. Coverage is a smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN and CONFIG_PROVE_LOCKING would be welcome from anyone with the cycles. |
| CVE-2026-63826 | In the Linux kernel, the following vulnerability has been resolved: fbdev: fix use-after-free in store_modes() store_modes() replaces a framebuffer's modelist with modes from userspace. On success it frees the old modelist with fb_destroy_modelist(). Two fields still point into that freed list. One pointer is fb_display[i].mode, the mode a console is using. fbcon_new_modelist() moves these pointers to the new list. It only does so for consoles still mapped to the framebuffer. An unmapped console is skipped and keeps its stale pointer. Unbinding fbcon, for example, sets con2fb_map[i] to -1 but leaves fb_display[i].mode set. An FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches fbcon_mode_deleted(). That function reads the stale fb_display[i].mode through fb_mode_is_equal(). The read is a use-after-free. The other pointer is fb_info->mode, the current mode. It is set through the mode sysfs attribute. store_modes() does not update fb_info->mode, so it is left pointing into the freed list. show_mode(), the attribute's read handler, dereferences the stale fb_info->mode through mode_string(). The read is a use-after-free. Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon: Set fb_display[i]->mode to NULL when the mode is released") added the helper fbcon_delete_modelist(). It clears every fb_display[i].mode that points into a given list. So far it is called only from the unregister path. Call it from store_modes() too, and set fb_info->mode to NULL. |
| CVE-2026-63824 | In the Linux kernel, the following vulnerability has been resolved: KEYS: fix overflow in keyctl_pkey_params_get_2() The length for the internal output buffer is calculated incorrectly, which can result overflow when a too small buffer is provided. Fix the bug by allocating internal output with the size of the maximum length of the cryptographic primitive instead of caller provided size. |
| CVE-2026-63823 | In the Linux kernel, the following vulnerability has been resolved: keys: Pin request_key_auth payload in instantiate paths A: request_key() B: KEYCTL_INSTANTIATE_IOV ================ ========================= create auth key store rka in auth key wait for helper get auth key load rka from auth key copy user payload sleep on #PF helper completed detach and free rka destroy auth key wake up use rka->target_key **USE-AFTER-FREE** Give request_key_auth payloads a refcount. Take a payload reference while authkey->sem stabilizes the payload and revocation state. Hold that reference across the instantiate and reject paths. Drop the auth key owning reference from revoke and destroy. [jarkko: Replaced the first two paragraphs of text with an actual concurrency scenario.] |
| CVE-2026-63822 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath11k_pci), and we get: WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90 Call Trace: free_large_kmalloc ath11k_dp_free ath11k_core_deinit ath11k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. |
| CVE-2026-63821 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: fix memory leaks on USB write failures When rtw_usb_write_port() fails to submit a USB Request Block (URB) (e.g., due to device disconnect or ENOMEM), the completion callback is never executed. Currently, the driver ignores the return value of rtw_usb_write_port() in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because these functions rely on the completion callback to free the socket buffers (skbs) and the transaction control block (txcb), a submission failure results in: 1. A memory leak of the allocated skb in rtw_usb_write_data(). 2. A memory leak of the txcb structure and all aggregated skbs in rtw_usb_tx_agg_skb(). Fix this by checking the return value of rtw_usb_write_port(). If it fails, explicitly free the skb in rtw_usb_write_data(), and properly purge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb(). The issue was discovered in practice during device disconnect/reconnect scenarios and memory pressure conditions. Tested by verifying normal TX operation continues after the fix without regressions. |
| CVE-2026-63818 | In the Linux kernel, the following vulnerability has been resolved: f2fs: validate orphan inode entry count f2fs_recover_orphan_inodes() trusts the orphan block entry_count when replaying orphan inodes from the checkpoint pack. A corrupted entry_count larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the ino[] array and interpret footer or following data as inode numbers. On a crafted image, mounting an unpatched kernel can drive orphan recovery into f2fs_bug_on() and panic the kernel. Validate entry_count before consuming entries so corrupted checkpoint data fails the mount with -EFSCORRUPTED and requests fsck instead. Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be recorded in the superblock s_errors[] field. This gives fsck a persistent hint even though mount-time orphan recovery failure may leave no chance to persist SBI_NEED_FSCK through a checkpoint. |
| CVE-2026-63817 | In the Linux kernel, the following vulnerability has been resolved: f2fs: validate compress cache inode only when enabled F2FS_COMPRESS_INO() uses NM_I(sbi)->max_nid as the synthetic inode number for the compressed page cache inode. That inode only exists when the compress_cache mount option is enabled. When compress_cache is disabled, max_nid is outside the valid inode range. A corrupted directory entry that points to ino == max_nid should therefore be rejected by f2fs_check_nid_range(). However, is_meta_ino() currently treats F2FS_COMPRESS_INO() as a meta inode unconditionally, so f2fs_iget() bypasses do_read_inode() and its nid range check, and instantiates a fake internal inode instead. Gate the compressed cache inode case on COMPRESS_CACHE, matching f2fs_init_compress_inode(). With compress_cache disabled, ino == max_nid now follows the normal inode path and is rejected as an out-of-range nid. |
| CVE-2026-63816 | In the Linux kernel, the following vulnerability has been resolved: f2fs: atomic: fix UAF issue on f2fs_inode_info.atomic_inode - ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink - f2fs_gc - gc_data_segment - ra_data_block(cow_inode) - mapping = F2FS_I(inode)->atomic_inode->i_mapping : f2fs_is_cow_file(cow_inode) is true - f2fs_evict_inode(atomic_inode) - clear_inode_flag(fi->cow_inode, FI_COW_FILE) - F2FS_I(fi->cow_inode)->atomic_inode = NULL ... - truncate_inode_pages_final(atomic_inode) - f2fs_grab_cache_folio(mapping) : create folio in atomic_inode->mapping - clear_inode(atomic_inode) - BUG_ON(atomic_inode->i_data.nrpages) We need to add a reference on fi->atomic_inode before using its mapping field during garbage collection, otherwise, it will cause UAF issue. |
| CVE-2026-63815 | In the Linux kernel, the following vulnerability has been resolved: f2fs: bound i_inline_xattr_size for non-inline-xattr inodes When the flexible_inline_xattr feature is enabled, do_read_inode() loads the on-disk i_inline_xattr_size unconditionally: if (f2fs_sb_has_flexible_inline_xattr(sbi)) fi->i_inline_xattr_size = le16_to_cpu(ri->i_inline_xattr_size); but sanity_check_inode() only range-checks it when the inode also has the FI_INLINE_XATTR flag set. An inode that carries an inline dentry or inline data but not FI_INLINE_XATTR -- the normal layout for an inline directory -- therefore keeps a fully attacker-controlled i_inline_xattr_size from a crafted image. get_inline_xattr_addrs() returns that value with no flag gating, so it feeds the inode geometry: MAX_INLINE_DATA() = 4 * (CUR_ADDRS_PER_INODE - i_inline_xattr_size - 1) NR_INLINE_DENTRY() = MAX_INLINE_DATA() * BITS_PER_BYTE / (...) addrs_per_page() = CUR_ADDRS_PER_INODE - i_inline_xattr_size A large i_inline_xattr_size drives MAX_INLINE_DATA() and NR_INLINE_DENTRY() negative, so make_dentry_ptr_inline() sets d->max (int) to a negative value. The inline directory walk then compares an unsigned long bit_pos against that negative d->max, which is promoted to a huge unsigned bound, and reads far past the inline area: while (bit_pos < d->max) /* fs/f2fs/dir.c */ ... test_bit_le(bit_pos, d->bitmap) / d->dentry[bit_pos] ... Mounting a crafted image and reading such a directory triggers an out-of-bounds read in f2fs_fill_dentries(); the same underflow also corrupts ADDRS_PER_INODE for regular files. Validate i_inline_xattr_size against MAX_INLINE_XATTR_SIZE whenever the flexible_inline_xattr feature is enabled -- i.e. whenever the value is loaded from disk and consumed -- and keep the lower MIN_INLINE_XATTR_SIZE bound gated on inodes that actually carry an inline xattr, so legitimate inodes with i_inline_xattr_size == 0 are still accepted. |
| CVE-2026-63814 | In the Linux kernel, the following vulnerability has been resolved: f2fs: validate ACL entry sizes in f2fs_acl_from_disk() f2fs_acl_count() only validates the aggregate ACL xattr length. A malformed ACL can still place ACL_USER or ACL_GROUP in a slot that only contains struct f2fs_acl_entry_short bytes, and f2fs_acl_from_disk() then reads entry->e_id before verifying that a full entry fits. Require a short entry before reading e_tag and e_perm, and require a full entry before reading e_id for ACL_USER and ACL_GROUP. Return -EFSCORRUPTED from these new truncated-entry checks, while keeping the pre-existing -EINVAL paths unchanged. Validation reproduced this kernel report: KASAN slab-out-of-bounds in __f2fs_get_acl+0x6fb/0x7e0 RIP: 0033:0x7f4b835ea7aa The buggy address belongs to the object at ffff888114589960 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 8-byte region [ffff888114589960, ffff888114589968) Read of size 4 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) __f2fs_get_acl+0x6fb/0x7e0 (fs/f2fs/acl.c:169) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x224/0x430 (?:?) kasan_report+0xe0/0x110 (?:?) __f2fs_get_acl+0x5/0x7e0 (fs/f2fs/acl.c:169) __get_acl+0x281/0x380 (?:?) vfs_get_acl+0x10b/0x190 (?:?) do_get_acl+0x2a/0x410 (?:?) do_get_acl+0x9/0x410 (?:?) do_getxattr+0xe8/0x260 (?:?) filename_getxattr+0xd1/0x140 (?:?) do_getname+0x2d/0x2d0 (?:?) path_getxattrat+0x16c/0x200 (?:?) lock_release+0xc8/0x290 (?:?) cgroup_update_frozen+0x9d/0x320 (?:?) lockdep_hardirqs_on_prepare+0xea/0x1a0 (?:?) trace_hardirqs_on+0x1a/0x170 (?:?) _raw_spin_unlock_irq+0x28/0x50 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| CVE-2026-63812 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix incorrect FI_NO_EXTENT handling in __destroy_extent_node() When __destroy_extent_node() sets the inode flag FI_NO_EXTENT, it does not reset the length of the largest extent to 0 and update the inode folio. Since modifications to the extent tree are disallowed afterward, the cached largest extent may become stale. This can trigger the following error in xfstests generic/388: F2FS-fs (dm-0): sanity_check_extent_cache: inode (ino=1761) extent info [220057, 57, 6] is incorrect, run fsck to fix In the f2fs_drop_inode path, __destroy_extent_node() does not need to guarantee that et->node_cnt is 0, because concurrency with writeback is expected in this path, and writeback may update the extent cache. This patch reverts commit ed78aeebef05 ("f2fs: fix node_cnt race between extent node destroy and writeback"), and remove the unnecessary zero check of et->node_cnt. |
| CVE-2026-63810 | In the Linux kernel, the following vulnerability has been resolved: block: Avoid mounting the bdev pseudo-filesystem in userspace The bdev pseudo-filesystem is an internal kernel filesystem with which userspace should not interfere. Unregister it so that userspace cannot even attempt to mount it. This fixes a bug [1] that occurs when attempting to access files, because the system call move_mount() uses pointers declared in the inode_operations structure, which for the bdev pseudo-filesystem are always equal to 0. `inode->i_op = &empty_iops;` [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 23380067 P4D 23380067 PUD 23381067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN NOPTI CPU: 2 PID: 17125 Comm: syz-executor.0 Not tainted 6.1.155-syzkaller-00350-g84221fde2681 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:0x0 Call Trace: <TASK> lookup_open.isra.0+0x700/0x1180 fs/namei.c:3460 open_last_lookups fs/namei.c:3550 [inline] path_openat+0x953/0x2700 fs/namei.c:3780 do_filp_open+0x1c5/0x410 fs/namei.c:3810 do_sys_openat2+0x171/0x4d0 fs/open.c:1318 do_sys_open fs/open.c:1334 [inline] __do_sys_openat fs/open.c:1350 [inline] __se_sys_openat fs/open.c:1345 [inline] __x64_sys_openat+0x13c/0x1f0 fs/open.c:1345 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| CVE-2026-63809 | In the Linux kernel, the following vulnerability has been resolved: bpf: use kvfree() for replaced sysctl write buffer proc_sys_call_handler() allocates its temporary sysctl buffer with kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since kvzalloc() may fall back to vmalloc() for large allocations, freeing that buffer with kfree() is wrong and can corrupt memory. Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc allocations. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc5. Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the test tree also included the accompanying fix for the stale ret == 1 check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines failslab injections to the proc_sys_call_handler() range, uses stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to /proc/sys/kernel/domainname from a task in the target cgroup. Under that setup, fail-nth=1 triggered the fault: BUG: unable to handle page fault for address: ffffeb0200024d48 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 SMP KASAN NOPTI CPU: 2 UID: 0 PID: 209 Comm: repro_proc_sys_ Not tainted 7.1.0-rc4-00686-g97625979a5d4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:kfree+0x6e/0x510 ... Call Trace: <TASK> ? __cgroup_bpf_run_filter_sysctl+0x626/0xc30 __cgroup_bpf_run_filter_sysctl+0x74d/0xc30 ? __pfx___cgroup_bpf_run_filter_sysctl+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? __kvmalloc_node_noprof+0x345/0x870 ? proc_sys_call_handler+0x250/0x480 ? srso_return_thunk+0x5/0x5f proc_sys_call_handler+0x3a2/0x480 ? __pfx_proc_sys_call_handler+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? selinux_file_permission+0x39f/0x500 ? srso_return_thunk+0x5/0x5f ? lock_is_held_type+0x9e/0x120 vfs_write+0x98e/0x1000 ... </TASK> With this fix applied on top of the same test setup, rerunning the reproducer with fail-nth=1 yields no corresponding Oops reports. |
| CVE-2026-63808 | In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential use-after-free in exfat_find_dir_entry() In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) { ... len = exfat_extract_uni_name(ep, entry_uniname); ... } After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()"). Move brelse(bh) so it runs after ep is no longer dereferenced on each branch. Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). With a debug-only invalidate_bdev() inserted between brelse(bh) and the ep read to make the stale-deref window deterministic, the unpatched kernel faults: BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0 With this patch applied, the same instrumented harness completes cleanly under the same sanitizer stack. I have not reproduced a crash on an uninstrumented kernel under ordinary reclaim; the instrumented A/B establishes the lifetime violation and that the patch closes it, not an unaided triggerability claim. |
| CVE-2026-63807 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level When recovering hugepages in the shadow MMU, verify that the base gfn of the shadow page is actually contained within the target memslot, *before* querying the max mapping level given the shadow page's gfn. Failure to pre-check the validity of the gfn can lead to an out-of-bounds access to the slot's lpage_info (which typically manifests as a host #PF because the lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its PTEs) that extends "below" the bounds of a memslot. When faulting in memory for a guest, and the size of the guest mapping is greater than KVM's (current) max mapping, then KVM will create a "direct" shadow page (direct in that there are no gPTEs to shadow, and so the target gfn is a direct calculation given the base gfn of the shadow page). The hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB mappings when dirty logging generates the guest > host mapping size case. When the 4KiB restriction is lifted, then KVM can replace the shadow page with a hugepage. But if KVM originally used a smaller mapping than the guest because the range of memory covered by the guest hugepage exceeds the bounds of a memslot, then KVM will link a direct shadow page with a gfn that is outside the bounds of the memslot being used to fault in memory. The rmap entry added for the leaf mapping is correct and within bounds, but the gfn of the leaf SPTE's parent shadow page will be out of bounds. BUG: unable to handle page fault for address: ffffc90000806ffc #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0 Oops: Oops: 0000 [#1] SMP CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm] Call Trace: <TASK> kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm] kvm_set_memslot+0x1ee/0x590 [kvm] kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm] kvm_vm_ioctl+0x9bf/0x15d0 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0xbb0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f21c0f1a9bf </TASK> Don't bother pre-checking the bounds of the potential hugepage, i.e. don't check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also within the memslot, as the checks performed by kvm_mmu_max_mapping_level() are a superset of the basic bounds checks. I.e. pre-checking the full range would be a dubious micro-optimization. |
| CVE-2026-63806 | In the Linux kernel, the following vulnerability has been resolved: KVM: Replace guest-triggerable BUG_ON() in ioeventfd datamatch with get_unaligned() Drop a BUG_ON() that has been reachable since it was first added, way back in 2009, and instead use get_unaligned() to perform potentially-unaligned accesses. For a given store, KVM x86's emulator tracks the entire value in the destination operand, x86_emulate_ctxt.dst. If the destination is memory, and the target splits multiple pages and/or is emulated MMIO, then KVM handles each fragment independently. E.g. on a page split starting at page offset 0xffc, KVM writes 4 bytes to the first page, then the remaining bytes to the second page, using ctxt->dst as the source for both (with appropriate offsets). If the destination splits a page *and* hits emulated MMIO on the second page, then KVM will complete the write to the first page, then emulate the MMIO access to the second page. If there is a datamatch-enabled ioeventfd at offset 0 of the second page, then KVM will process the remainder of the store as a potential ioeventfd signal. Putting it all together, if the guest emits a store that splits a page starting at page offset N, and the second page has a datamatch-enabled ioeventfd at offset 0, then KVM will check for datamatch using &dst.valptr[N] as the source. Due to dst (and thus dst.valptr) being 32-byte aligned, if N is not aligned to @len, the BUG_ON() fires. E.g. with a 16-byte store at page offset 0xffc, to an ioeventfd of len 8, all initial checks in ioeventfd_in_range() will succeed, and the BUG_ON() fires due to @val being 4-byte aligned, but not 8-byte aligned. ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/../../../virt/kvm/eventfd.c:783! Oops: invalid opcode: 0000 [#1] SMP CPU: 0 UID: 1000 PID: 615 Comm: repro Not tainted 7.1.0-rc2-ff238429d1ea #365 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:ioeventfd_write+0x6c/0x70 [kvm] Call Trace: <TASK> __kvm_io_bus_write+0x85/0xb0 [kvm] kvm_io_bus_write+0x53/0x80 [kvm] vcpu_mmio_write+0x66/0xf0 [kvm] emulator_read_write_onepage+0x12a/0x540 [kvm] emulator_read_write+0x109/0x2b0 [kvm] x86_emulate_insn+0x4f8/0xfb0 [kvm] x86_emulate_instruction+0x181/0x790 [kvm] kvm_mmu_page_fault+0x313/0x630 [kvm] vmx_handle_exit+0x18a/0x590 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc81/0x1c90 [kvm] kvm_vcpu_ioctl+0x2d5/0x970 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0x890 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f19c931a9bf </TASK> Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0000000000000000 ]--- In a perfect world, the fix would be to simply delete the BUG_ON(), as KVM x86 doesn't perform alignment checks on "normal" memory accesses at CPL0. Sadly, C99 ruins all the fun; while the x86 architecture plays nice, dereferencing an unaligned pointer directly is undefined behavior in C, e.g. triggers splats when running with CONFIG_UBSAN_ALIGNMENT=y. |
| CVE-2026-63804 | In the Linux kernel, the following vulnerability has been resolved: gfs2: fix use-after-free in gfs2_qd_dealloc gfs2_qd_dealloc(), called as an RCU callback from gfs2_qd_dispose(), accesses the superblock object sdp through qd->qd_sbd after freeing qd. It does so to decrement sd_quota_count and wake up sd_kill_wait. However, by the time the RCU callback runs, gfs2_put_super() may have already freed sdp via free_sbd(). This can happen when gfs2_quota_cleanup() is called during unmount: it disposes of quota objects via call_rcu() and then waits on sd_kill_wait with a 60-second timeout. If the timeout expires, or if gfs2_gl_hash_clear() triggers additional qd_put() calls that schedule more RCU callbacks after the wait completes, gfs2_put_super() will proceed to free the superblock while RCU callbacks referencing it are still pending. Add an rcu_barrier() before free_sbd() in gfs2_put_super() to ensure all pending RCU callbacks (including gfs2_qd_dealloc) have completed before the superblock is freed. |
| CVE-2026-63803 | In the Linux kernel, the following vulnerability has been resolved: hdlc_ppp: sync per-proto timers before freeing hdlc state Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp registers a timer via timer_setup(). That struct ppp is the hdlc->state allocation, which detach_hdlc_protocol() frees with kfree() in both teardown paths: unregister_hdlc_device() and the re-attach inside attach_hdlc_protocol(). The ppp proto never registered a .detach callback, so detach_hdlc_protocol() performs no timer synchronization before the kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(), is partial (it does not wait for a running callback) and only runs on the ->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A ppp_timer callback already executing (blocked on ppp->lock) survives the kfree and then dereferences proto->state / ppp->lock in freed memory, leading to a use-after-free. Fix this by adding a .detach helper that calls timer_shutdown_sync() on every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev) before kfree(hdlc->state), so timer_shutdown_sync() now runs on both free paths. timer_shutdown_sync() is used instead of timer_delete_sync() because the keepalive path re-arms the timer through add_timer()/mod_timer() and shutdown blocks any re-activation during teardown. Initialize the per-protocol timers in ppp_ioctl() when the protocol is attached, and remove the now-redundant timer_setup() from ppp_start(), so that the timers are initialized exactly once at attach time and ppp_timer_release() never operates on uninitialized timer_list structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so struct ppp's protos[i].timer is uninitialized garbage until the first timer_setup(); without this init-at-attach, attaching the PPP protocol without ever bringing the device up would leave timer_shutdown_sync() operating on uninitialized memory in .detach. Moving the init out of ppp_start() (which only runs on NETDEV_UP) into the attach path makes the initialization unconditional and avoids initializing the same timer_list twice. This bug was found by static analysis. |
| CVE-2026-63802 | In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF in __blkcg_rstat_flush() When multiple blkgs in the same blkcg are released concurrently, a use-after-free can occur. The race happens when one blkg's __blkcg_rstat_flush() removes another blkg's iostat entries via llist_del_all(). The second blkg sees an empty list and proceeds to free itself while the first is still iterating over its entries. Move the flush from __blkg_release() (RCU callback) to blkg_release() (before call_rcu). This ensures the RCU grace period waits for any concurrent flush's rcu_read_lock() section to complete before freeing. |
| CVE-2026-63801 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix slab-use-after-free Read in tipc_aead_decrypt_done tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to crypto_aead_decrypt(req) without taking a reference on the netns, unlike the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously (e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the per-netns tipc_crypto, and the completion then reads it: tipc_aead_decrypt_done() dereferences aead->crypto->stats and aead->crypto->net, and tipc_crypto_rcv_complete() dereferences aead->crypto->aead[] and the node table -- reading freed memory. Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO): BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999) Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51 Workqueue: events_unbound Call Trace: tipc_aead_decrypt_done (net/tipc/crypto.c:999) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 169: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) tipc_crypto_start (net/tipc/crypto.c:1502) tipc_init_net (net/tipc/core.c:72) ops_init (net/core/net_namespace.c:137) setup_net (net/core/net_namespace.c:446) copy_net_ns (net/core/net_namespace.c:579) create_new_namespaces (kernel/nsproxy.c:132) __x64_sys_unshare (kernel/fork.c:3316) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Freed by task 8: kfree (mm/slub.c:6566) tipc_exit_net (net/tipc/core.c:119) cleanup_net (net/core/net_namespace.c:704) process_one_work (kernel/workqueue.c:3314) kthread (kernel/kthread.c:436) This is the same class of bug that commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt side. The encrypt path takes maybe_get_net(aead->crypto->net) before crypto_aead_encrypt() and drops it with put_net() on the synchronous return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY return keeps the reference for the async callback to release. The decrypt path was left without the equivalent guard. Mirror the encrypt-side fix on the decrypt path: take a net reference before crypto_aead_decrypt() (failing with -ENODEV and the matching bearer put if it cannot be acquired), keep it across the -EINPROGRESS/-EBUSY async return, and drop it with put_net() on the synchronous success/error return and at the end of tipc_aead_decrypt_done(). Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is flooded with crafted encrypted frames from an unknown peer (driving the cluster-key decrypt path) while the bearer's netns is repeatedly torn down. The completion must run asynchronously to outlive tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts synchronously, so the async path was exercised via cryptd offload. The unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the unpatched upstream path; tipc_aead_decrypt() still lacks maybe_get_net(aead->crypto->net), so the completion can outlive the free on any config where crypto_aead_decrypt() goes async. Found by 0sec automated security-research tooling (https://0sec.ai). |
| CVE-2026-63800 | In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix use-after-free in pnfs_update_layout() When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(), the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds, pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(), which still references 'lo'. This results in a use-after-free when the tracepoint accesses lo's fields. Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo). |
| CVE-2026-63798 | In the Linux kernel, the following vulnerability has been resolved: irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe and sets up chained handlers using irq_set_chained_handler_and_data(). However, on driver removal, the generic chips are not freed and the chained handlers are not removed. The generic chips remain on the global gc_list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, potentially resulting in a use-after-free and kernel crash. The chained handlers that were installed in probe for peripheral and syswake interrupts are also left dangling, which can lead to spurious interrupts accessing freed memory. Fix these issues by: - Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the core code automatically removes generic chips when irq_domain_remove() is called - Clearing all chained handlers with NULL in pdc_intc_remove() |
| CVE-2026-63797 | In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Fix use-after-free on probe error path rpmsg_chrdev_probe() stores the newly allocated eptdev in the default endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while the default endpoint may still dispatch callbacks with the stale priv pointer. Avoid publishing eptdev through the default endpoint until rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv pointer is published should be ignored by rpmsg_ept_cb(). Flow-control updates can hit rpmsg_ept_flow_cb() in the same window, so make both callbacks return success when priv is NULL. |
| CVE-2026-63796 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject oversized group bitmap descriptors ocfs2_validate_gd_parent() only bounds bg_bits against the parent allocator's chain geometry. A malicious descriptor can still claim a bg_size/bg_bits pair that exceeds the bitmap bytes that physically fit in the group descriptor block, so later bitmap scans and bit updates can run past bg_bitmap. Add a physical-cap check based on ocfs2_group_bitmap_size() for the parent allocator type and reject descriptors whose bg_size or bg_bits exceed that capacity. Keep the existing chain geometry check so both the on-disk bitmap layout and the allocator metadata must agree before the descriptor is used. Validation reproduced this kernel report: KASAN use-after-free in _find_next_bit+0x7f/0xc0 Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) _find_next_bit+0x7f/0xc0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) ocfs2_find_max_contig_free_bits+0x35/0x70 (fs/ocfs2/suballoc.c:1375) ocfs2_block_group_set_bits+0x472/0x4b0 (fs/ocfs2/suballoc.c:1457) ocfs2_cluster_group_search+0x16b/0x440 (fs/ocfs2/suballoc.c:86) ocfs2_bg_discontig_fix_result+0x1ef/0x230 (fs/ocfs2/suballoc.c:1786) ocfs2_search_chain+0x8f8/0x10a0 (fs/ocfs2/suballoc.c:1886) get_page_from_freelist+0x70e/0x2370 (?:?) lock_release+0xc6/0x290 (?:?) do_raw_spin_unlock+0x9a/0x100 (?:?) kasan_unpoison+0x27/0x60 (?:?) __bfs+0x147/0x240 (?:?) get_page_from_freelist+0x83d/0x2370 (?:?) ocfs2_claim_suballoc_bits+0x38c/0xe70 (fs/ocfs2/suballoc.c:96) sched_domains_numa_masks_clear+0x70/0xd0 (?:?) check_irq_usage+0xe8/0xb70 (?:?) __ocfs2_claim_clusters+0x18d/0x4c0 (fs/ocfs2/suballoc.c:2497) check_path+0x24/0x50 (?:?) rcu_is_watching+0x20/0x50 (?:?) check_prev_add+0xfd/0xd00 (?:?) ocfs2_add_clusters_in_btree+0x17d/0x810 (fs/ocfs2/suballoc.c:?) __folio_batch_add_and_move+0x1f5/0x3d0 (?:?) ocfs2_add_inode_data+0xd9/0x120 (fs/ocfs2/suballoc.c:?) filemap_add_folio+0x105/0x1f0 (?:?) ocfs2_write_begin_nolock+0x29f7/0x2f80 (fs/ocfs2/suballoc.c:3043) ocfs2_read_inode_block+0xb5/0x110 (fs/ocfs2/suballoc.c:?) down_write+0xf5/0x180 (?:?) ocfs2_write_begin+0x180/0x240 (fs/ocfs2/suballoc.c:?) __mark_inode_dirty+0x758/0x9a0 (?:?) inode_to_bdi+0x41/0x90 (?:?) balance_dirty_pages_ratelimited_flags+0xf8/0x1d0 (?:?) generic_perform_write+0x252/0x440 (?:?) mnt_put_write_access_file+0x16/0x70 (?:?) file_update_time_flags+0xe4/0x200 (?:?) ocfs2_file_write_iter+0x80a/0x1320 (fs/ocfs2/suballoc.c:?) lock_acquire+0x184/0x2f0 (?:?) ksys_write+0xd2/0x170 (?:?) apparmor_file_permission+0xf5/0x310 (?:?) read_zero+0x8d/0x140 (?:?) lock_is_held_type+0x8f/0x100 (?:?) |
| CVE-2026-63795 | In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request. |
| CVE-2026-63794 | In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT path In sev_dbg_crypt(), the per-iteration transfer length is bounded by the source page offset (PAGE_SIZE - s_off) but not by the destination page offset (PAGE_SIZE - d_off). When d_off > s_off, the encrypt path (__sev_dbg_encrypt_user) performs a read-modify-write using a single-page intermediate buffer (dst_tpage): 1. __sev_dbg_decrypt() expands the size to round_up(len + (d_off & 15), 16) before issuing the PSP command. If len + (d_off & 15) > PAGE_SIZE, the PSP writes beyond the end of the 4096-byte dst_tpage allocation. 2. The subsequent memcpy()/copy_from_user() into page_address(dst_tpage) + (d_off & 15) of 'len' bytes overflows by up to 15 bytes under the same condition. Trigger example: s_off = 0, d_off = 1, debug.len = PAGE_SIZE - the PSP is instructed to write round_up(4097, 16) = 4112 bytes to a 4096-byte buffer. Fix by also bounding len by (PAGE_SIZE - d_off), the same check that sev_send_update_data() already performs for its single-page guest region. ================================================================== BUG: KASAN: slab-use-after-free in sev_dbg_crypt+0x993/0xd10 [kvm_amd] Write of size 4095 at addr ff110062293bb009 by task sev_dbg_test/228214 CPU: 96 UID: 0 PID: 228214 Comm: sev_dbg_test Tainted: G U W 7.0.0-smp--5ce9b0c48211-dbg #156 PREEMPTLAZY Tainted: [U]=USER, [W]=WARN Hardware name: Google Astoria/astoria, BIOS 0.20250817.1-0 08/25/2025 Call Trace: <TASK> dump_stack_lvl+0x54/0x70 print_report+0xbc/0x260 kasan_report+0xa2/0xd0 kasan_check_range+0x25f/0x2c0 __asan_memcpy+0x40/0x70 sev_dbg_crypt+0x993/0xd10 [kvm_amd] sev_mem_enc_ioctl+0x33c/0x450 [kvm_amd] kvm_vm_ioctl+0x65d/0x6d0 [kvm] __se_sys_ioctl+0xb2/0x100 do_syscall_64+0xe8/0x870 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7fe72b6a0 pfn:0x62293bb memcg:ff11000112827d82 flags: 0x1400000000000000(node=1|zone=1) raw: 1400000000000000 0000000000000000 dead000000000122 0000000000000000 raw: 00000007fe72b6a0 0000000000000000 00000001ffffffff ff11000112827d82 page dumped because: kasan: bad access detected Memory state around the buggy address: ff110062293bbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff110062293bbf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ff110062293bc000: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ff110062293bc080: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ff110062293bc100: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint [sean: add sample KASAN splat, Fixes, and stable@] |
| CVE-2026-63793 | In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize volume label accesses Protect vol->volume_label with a mutex and snaphost the label before copy_to_user. This prevent a use-after-free when FS_IOC_SETFSLABEL replaces the vol->volume_label and FS_IOC_GETTSLABEL reads it concurrently. |
| CVE-2026-58472 | GNU Wget through 1.25.0, fixed in commit dd692d9, contains a heap buffer overflow vulnerability in the html_quote_string() function in src/convert.c that allows a remote attacker to trigger memory corruption by supplying a crafted HTML attribute with a large number of characters requiring entity encoding. A server-supplied HTML attribute causes a signed integer counter to overflow during output size accumulation, resulting in an undersized heap allocation and subsequent heap buffer overflow during the copy phase. |
| CVE-2026-58471 | GNU Wget through 1.25.0, fixed in commit c2640fe, contains a heap buffer overflow vulnerability in the convert_fname() function within src/url.c that allows remote attackers to trigger memory corruption through a server-supplied filename requiring character set conversion. When the output buffer is too small during iconv E2BIG reallocation, the reallocation logic miscalculates the remaining space, leading to a heap buffer overflow that can be exploited via a maliciously crafted server response. |
| CVE-2026-58470 | GNU Wget through 1.25.0, fixed in commit 43d3ba9, contains an integer overflow vulnerability in the parse_content_range() function within src/http.c that allows server-controlled values to cause signed integer arithmetic to overflow. Attackers can supply malicious Content-Range header values to trigger undefined behavior and download desynchronization in the affected client. |
| CVE-2026-58469 | GNU Wget through 1.25.0, fixed in commit 37a40fc, contains a heap buffer underread vulnerability in the clean_metalink_string() function within src/metalink.c that allows a malicious server to trigger memory corruption by serving a Metalink document containing a whitespace-only URL. Attackers can cause the function to decrement a pointer past the start of the buffer when processing an all-whitespace Metalink URL, potentially leading to abnormal program behavior. |
| CVE-2026-58055 | nghttp2's nghttpx proxy through 1.69.0 forwards an HTTP/1.1 Upgrade request that also carries a Content-Length header and body onto reusable keep-alive backend connections, re-adding the Upgrade and Connection headers while passing Content-Length verbatim. A backend that resolves the resulting ambiguous message in the attacker's favor enables HTTP request/response smuggling and cross-client response-queue poisoning. |
| CVE-2026-55655 | A flaw was found in OpenSSH. A local unprivileged attacker on a Linux client host can hijack client-side X11 forwarding connections. This is possible by pre-binding the preferred abstract X socket name when X11 forwarding is enabled and a local UNIX-domain X socket is used. A successful attack can compromise the confidentiality of forwarded X11 traffic, including sensitive window contents and input, and may allow some manipulation of the forwarded session. |
| CVE-2026-55654 | A flaw was found in OpenSSH. This vulnerability, a heap out-of-bounds read, occurs during the cleanup of GSSAPI (Generic Security Service Application Programming Interface) indicators when a trailing NULL termination is missing in the auth-indicators array. A remote attacker, under specific configurations involving GSSAPI authentication and a Kerberos environment, could exploit this to cause the SSH authentication path to crash or abort. This leads to a denial of service (DoS), impacting the availability of the SSH service. |
| CVE-2026-53403 | In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var info->var, a framebuffer's current mode, is expected to have a matching entry in info->modelist. var_to_display() relies on this and treats a failed fb_match_mode() as "This should not happen". fb_set_var() keeps it true by adding the mode to the list on every change, and do_register_framebuffer() does the same at registration. store_modes() replaces the modelist from userspace. fb_new_modelist() validates the new modes but does not check that info->var still has a match. It relies on fbcon_new_modelist() to re-point consoles, but that only handles consoles mapped to the framebuffer. With fbcon unbound there are none, so info->var is left describing a mode that is no longer in the list. A later console takeover runs var_to_display(), where fb_match_mode() returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode. Keep the current mode in the list in fb_new_modelist(), the same way fb_set_var() does. |
| CVE-2026-53402 | In the Linux kernel, the following vulnerability has been resolved: fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font() When fbcon_do_set_font() fails (e.g., due to a memory allocation failure inside vc_resize() under heavy memory pressure), it jumps to the `err_out` label to roll back the console state. However, the current rollback logic forgets to restore the `hi_font` state, leading to a severe state machine corruption. Earlier in the function, `set_vc_hi_font()` might be called to change `vc->vc_hi_font_mask` and mutate the screen buffer. If `vc_resize()` subsequently fails, the `err_out` path restores `vc_font.charcount` but entirely skips rolling back the `vc_hi_font_mask` and the screen buffer. This mismatch leaves the terminal in a desynchronized state. Because `vc_hi_font_mask` remains set, the VT subsystem will still accept character indices greater than 255 from userspace and write them to the screen buffer. Subsequent rendering calls (e.g., `fbcon_putcs()`) will then use these inflated indices to access the reverted, 256-character font array, leading to a deterministic out-of-bounds read and potential kernel memory disclosure. Fix this by adding the missing rollback logic for the `hi_font` mask and screen buffer in the error path. |
| CVE-2026-53400 | In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter registration race Adapters can be looked up based on their id using i2c_get_adapter() which takes a reference to the embedded struct device. Make sure that the adapter (including its struct device) has been initialised before adding it to the IDR to avoid accessing uninitialised data which could, for example, lead to NULL-pointer dereferences or use-after-free. Note that the i2c-dev chardev, which is registered from a bus notifier, currently uses i2c_get_adapter() so the adapter needs to be added to the IDR before registration. |
| CVE-2026-53399 | In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp). |
| CVE-2026-53398 | In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix SECINFO_NO_NAME decode error cleanup nfsd4_decode_secinfo_no_name() currently initializes sin_exp after decoding sin_style. If the XDR stream is truncated, the decoder returns nfserr_bad_xdr before sin_exp is initialized. Since commit 3fdc54646234 ("NFSD: Reduce amount of struct nfsd4_compoundargs that needs clearing"), the inline iops array is not cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore leave sin_exp holding stale union contents from a previous operation. The error response path still invokes nfsd4_secinfo_no_name_release(), which calls exp_put() on a non-NULL sin_exp. Initialize sin_exp before the first failable decode step, matching nfsd4_decode_secinfo(). |
| CVE-2026-53397 | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix posix_acl leak on SETACL decode failure nfsaclsvc_decode_setaclargs() and nfs3svc_decode_setaclargs() each call nfs_stream_decode_acl() twice, first for NFS_ACL and then for NFS_DFACL. Each successful call transfers ownership of a freshly allocated posix_acl into argp->acl_access or argp->acl_default. If the first call succeeds but the second fails, the decoder returns false and argp->acl_access is left dangling. ACLPROC2_SETACL.pc_release was wired to nfssvc_release_attrstat and ACLPROC3_SETACL.pc_release was wired to nfs3svc_release_fhandle. Both only call fh_put() and have no knowledge of the ACL fields on argp. The posix_acl_release() pairs sat at the out: labels inside nfsacld_proc_setacl() and nfsd3_proc_setacl(), but svc_process() skips pc_func when pc_decode returns false, so that cleanup is unreachable on decode failure: svc_process_common() pc_decode() /* decode_setaclargs: false */ /* pc_func skipped */ pc_release() /* fh_put only -- ACLs leaked */ The orphaned posix_acl is leaked for the lifetime of the server. Fix by adding nfsaclsvc_release_setacl() and nfs3svc_release_setacl(), which release both argp->acl_access and argp->acl_default in addition to fh_put(), and wiring them as pc_release for their respective SETACL procedures. pc_release runs on every path svc_process() takes after decode, including decode failure, so the posix_acl_release() pairs are removed from the proc functions' out: labels to keep ownership in one place. This matches the existing release_getacl() pattern used by the sibling GETACL procedures. |
| CVE-2026-53393 | In the Linux kernel, the following vulnerability has been resolved: nfsd: reset write verifier on deferred writeback errors nfsd_vfs_write() and nfsd_commit() both call filemap_check_wb_err() to detect deferred writeback errors, but neither rotates the server's write verifier (nn->writeverf) when this check fails. Every other durable-storage-failure path in these functions calls commit_reset_write_verifier() before returning an error. The missing rotation means clients holding UNSTABLE write data under the current verifier will COMMIT, receive the unchanged verifier back, and conclude their data is durable — silently dropping data that failed writeback. This violates the UNSTABLE+COMMIT durability contract (RFC 1813 §3.3.7, RFC 8881 §18.32). Add commit_reset_write_verifier() calls at both filemap_check_wb_err() error sites, matching the pattern used by adjacent error paths in the same functions. The helper already filters -EAGAIN and -ESTALE internally, so the calls are unconditionally safe. |
| CVE-2026-53392 | In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: reject zero filehandle version count ff_layout_alloc_lseg() decodes the filehandle-version array count from the flexfiles layout body. The value is used as the count for kzalloc_objs(), and the current code only rejects NULL. A zero count yields ZERO_SIZE_PTR, which can be stored in dss_info->fh_versions even though later flexfiles paths assume that at least one filehandle version exists. Reject fh_count == 0 before the allocation, matching the existing zero version_count validation in the flexfiles GETDEVICEINFO parser. A QEMU/KASAN run with a malformed flexfiles layout hit: KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750 ff_layout_encode_layoutreturn+0x683/0x970 nfs4_xdr_enc_layoutreturn+0x278/0x3a0 Kernel panic - not syncing: Fatal exception The patched kernel rejects the malformed layout without KASAN/oops/panic, and a valid fh_count=1 regression still opens, reads, and unmounts cleanly. |
| CVE-2026-53391 | In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr nfs4_decode_mp_ds_addr() decodes the r_netid and r_addr opaques of a netaddr4 from a GETDEVICEINFO multipath-DS body, then immediately calls strrchr(buf, '.') to locate the port separator. Both decodes use xdr_stream_decode_string_dup(), and the current code checks only "nlen < 0" / "rlen < 0" before dereferencing the returned string. When the on-wire opaque has length zero, xdr_stream_decode_opaque_inline() returns 0 and xdr_stream_decode_string_dup() falls through to its "*str = NULL; return ret" tail, leaving buf NULL with a return value of 0. The "< 0" check does not catch this, and the next line is strrchr(NULL, '.'), a kernel NULL pointer dereference reachable from any pNFS-flexfile client mounted against a malicious or compromised metadata server. Reject the zero-length cases explicitly so the decoder fails with -EBADMSG (treated as a malformed GETDEVICEINFO body) instead of panicking the client. |
| CVE-2026-53390 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds read in smb_check_perm_dacl() The permission-check ACE walk in smb_check_perm_dacl() validates the ACE header size and caps sid.num_subauth at SID_MAX_SUB_AUTHORITIES, but it never checks that ace->size is actually large enough to contain num_subauth sub-authorities before compare_sids() dereferences them. CIFS_SID_BASE_SIZE covers the SID header up to but excluding the sub_auth[] array, and offsetof(struct smb_ace, sid) is the ACE header, so the existing guards only guarantee the 8-byte SID base, i.e. zero sub-authorities. compare_sids() then reads ace->sid.sub_auth[i] for i < min(local_sid->num_subauth, ace->sid.num_subauth). The local comparison SIDs (sid_everyone, sid_unix_NFS_mode, and the id_to_sid() result) always have at least one sub-authority, and an attacker controls the ACE revision and authority bytes (which lie within the in-bounds SID base), so they can match one of those SIDs and force the sub_auth read. A crafted ACE with size == 16 and num_subauth >= 1 placed at the tail of the security descriptor therefore causes a heap out-of-bounds read of up to SID_MAX_SUB_AUTHORITIES * sizeof(__le32) bytes past the pntsd allocation. The security descriptor is loaded by ksmbd_vfs_get_sd_xattr() into a buffer sized exactly to the on-disk data (kzalloc(sd_size) in ndr_decode_v4_ntacl()), so the read lands past the allocation. The malformed descriptor can be stored verbatim via SMB2_SET_INFO (the DACL is not normalised before being written to the security.NTACL xattr) and the read fires on a subsequent SMB2_CREATE access check, making this reachable by an authenticated client on a share that uses ACL xattrs. Add the missing num_subauth-versus-ace_size check, mirroring the identical guards already present in the sibling parsers parse_dacl() and smb_inherit_dacl(). |
| CVE-2026-53389 | In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: fix use-after-free of key in del_async path In tcp_ao_delete_key(), the del_async path skips the current_key and rnext_key validity checks present in the synchronous path, assuming these pointers are always NULL on LISTEN sockets. However, if a key was added with set_current=1/set_rnext=1 while the socket was in CLOSE state, current_key and rnext_key will be non-NULL after listen() transitions the socket to LISTEN. When such a key is deleted with del_async=1, hlist_del_rcu() and call_rcu() free the key without clearing the dangling pointers. After the RCU grace period, getsockopt(TCP_AO_INFO) dereferences current_key->sndid and rnext_key->rcvid from freed slab memory. Clear current_key and rnext_key in the del_async path when they reference the key being deleted. |
| CVE-2026-53388 | In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before replacing page cache folio fuse_try_move_folio() unlocks the request on entry but does not re-lock it on the success path. This means fuse_chan_abort() can end the request and free the fuse_io_args (eg fuse_readpages_end()) while the subsequent copy chain logic after fuse_try_move_folio() accesses the fuse_io_args, leading to use-after-free issues. Fix this by calling lock_request() before replace_page_cache_folio(). This ensures the request is locked on the success path which will prevent the fuse_io_args from being freed while the later copying logic runs, and also ensures that the ap->folios[i]->mapping is never null since ap->folios[i] will always point to the newfolio after replace_page_cache_folio(). |
| CVE-2026-53387 | In the Linux kernel, the following vulnerability has been resolved: iio: light: veml6075: add bounds check to veml6075_it_ms index veml6075_it_ms has 5 elements but VEML6075_CONF_IT can yield values 0-7. If it returns a value >= 5, this causes an out-of-bounds array access. Add a bounds check and return -EINVAL if the index is out of range. The problem values are reserved so should never be read from the register. Hence this is hardening against fault device, missprogramming or bus corruption. |
| CVE-2026-53386 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1298: add bounds check to pga_settings index ads1298_pga_settings has 7 elements but ADS1298_MASK_CH_PGA can yield values 0-7. If it yields a value >= 7, this causes an out-of-bounds array access. Add a bounds check and return -EINVAL if the index is out of range. Note that the remaining value b111 is reserved so should not be seen in a correctly functioning system. |
| CVE-2026-53385 | In the Linux kernel, the following vulnerability has been resolved: vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write A KASAN null-ptr-deref was observed in vcs_notifier(): BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130 Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {} The issue is a race condition in vcs_write(). When the console_lock is temporarily dropped (to copy data from userspace), the vc_data pointer obtained from vcs_vc() may become stale. After re-acquiring the lock, vcs_vc() is called again to re-validate the pointer. If the vc has been deallocated in the meantime, vcs_vc() returns NULL, and the while loop breaks (with written > 0). However, after the loop, vcs_scr_updated(vc) is still called with the now-NULL vc pointer, leading to a null pointer dereference in the notifier chain (vcs_notifier dereferences param->vc). Fix this by adding a NULL check for vc before calling vcs_scr_updated(). |
| CVE-2026-53384 | In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails dw8250_probe() registers the 8250 port via serial8250_register_8250_port() and then, if the device has a clock, registers a clock notifier. If clk_notifier_register() fails, probe returns the error but leaves the 8250 port registered. The matching serial8250_unregister_port() lives in dw8250_remove(), which is not called when probe fails, so the port slot stays occupied until the device is rebound or the system is rebooted. The devm-allocated driver data is freed while the port still references it (via the saved private_data and serial_in/serial_out callbacks), so any access to that port slot before a rebind is a use-after-free hazard. Unregister the port on the clk_notifier_register() error path. |
| CVE-2026-53383 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject non-VALID session in compound request branch smb2_check_user_session() takes a shortcut for any operation that is not the first in a COMPOUND request: it reuses work->sess (the session bound by the first operation) and validates only the SessionId, then returns "valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation value) skips even the id comparison. The standalone path (ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does enforce the VALID state; the compound branch bypasses all of it. A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL (->user is assigned later, by ntlm_authenticate()). Used as operation 1 of a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX, \\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and reaches ksmbd_ipc_tree_connect_request(), which dereferences user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704) -> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd worker for all clients. Reject any non-first compound operation that lands on a session which is not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session, but it is never carried as a non-first compound operation, so multi-leg authentication is unaffected by this check. |
| CVE-2026-53382 | In the Linux kernel, the following vulnerability has been resolved: media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si syzbot reported a general protection fault in vidtv_psi_ts_psi_write_into [1]. vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does not check for this before dereferencing the returned pointer to access the continuity counter. This leads to a general protection fault when accessing a near-NULL address. The root cause is that vidtv_mux_pid_ctx_init() does not check the return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs. If the allocation fails, the PID context is never created, but init returns success. The subsequent vidtv_mux_push_si() call then gets NULL from vidtv_mux_get_pid_ctx() and crashes. Fix both the root cause (add error check in vidtv_mux_pid_ctx_init for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for all vidtv_mux_get_pid_ctx() calls. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: events vidtv_mux_tick RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197 Call Trace: <TASK> vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline] vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231 vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196 vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408 |
| CVE-2026-53381 | In the Linux kernel, the following vulnerability has been resolved: virtiofs: fix UAF on submount umount iput() called from fuse_release_end() can Oops if the super block has already been destroyed. Normally this is prevented by waiting for num_waiting to go down to zero before commencing with super block shutdown. This only works, however, for the last submount instance, as the wait counter is per connection, not per superblock. Revert to using synchronous release requests for the auto_submounts case, which is virtiofs only at this time. |
| CVE-2026-53366 | In the Linux kernel, the following vulnerability has been resolved: ipv4: account for fraggap on the paged allocation path In __ip_append_data(), when the paged-allocation branch is taken, alloclen and pagedlen are computed as alloclen = fragheaderlen + transhdrlen; pagedlen = datalen - transhdrlen; datalen already includes fraggap, but the fraggap bytes carried over from the previous skb are copied into the new skb's linear area at offset transhdrlen by the subsequent skb_copy_and_csum_bits(). The linear area is therefore undersized by fraggap bytes while pagedlen is overstated by the same amount. The non-paged branch sets alloclen to fraglen, which already accounts for fraggap because datalen does. Bring the paged branch in line by adding fraggap to alloclen and subtracting it from pagedlen. After this adjustment, copy no longer collapses to -fraggap on the paged path, so remove the stale comment describing that old arithmetic. |
| CVE-2026-53365 | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix zerocopy completion for multi-skb sends When a large message is fragmented into multiple skbs, the zerocopy uarg is only allocated and attached to the last skb in the loop. Non-final skbs carry pinned user pages with no completion tracking, so the kernel has no way to notify userspace when those pages are safe to reuse. If the loop breaks early the uarg is never allocated at all, leaking pinned pages with no completion notification. Fix this by following the approach used by TCP: allocate the zerocopy uarg (if not provided by the caller) before the send loop and attach it to every skb via skb_zcopy_set(), which takes a reference per skb. Each skb's completion properly decrements the refcount, and the notification only fires after the last skb is freed. On failure, if no data was sent, the uarg is cleanly aborted via net_zcopy_put_abort(). This issue was initially discovered by sashiko while reviewing commit 1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting") but was pre-existing. |
| CVE-2026-53362 (KEV) | In the Linux kernel, the following vulnerability has been resolved: ipv6: account for fraggap on the paged allocation path In __ip6_append_data(), when the paged-allocation branch is taken (MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are computed as alloclen = fragheaderlen + transhdrlen; pagedlen = datalen - transhdrlen; datalen already includes fraggap (datalen = length + fraggap). When fraggap is non-zero, this is not the first skb and transhdrlen is zero. The fraggap bytes carried over from the previous skb are copied just past the fragment headers in the new skb's linear area. The linear area is therefore undersized by fraggap bytes while pagedlen is overstated by the same amount, and the copy writes past skb->end into the trailing skb_shared_info. An unprivileged user can trigger this via a UDPv6 socket using MSG_MORE together with MSG_SPLICE_PAGES. The bad accounting was introduced by commit 773ba4fe9104 ("ipv6: avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix __ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative copy value caused -EINVAL to be returned. That later commit allowed MSG_SPLICE_PAGES to proceed in this case, making the corruption triggerable. The non-paged branch sets alloclen to fraglen, which already accounts for fraggap because datalen does. Bring the paged branch in line by adding fraggap to alloclen and subtracting it from pagedlen. After this adjustment, copy no longer collapses to -fraggap on the paged path, so remove the stale comment describing that old arithmetic. Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES case, remove the MSG_SPLICE_PAGES exception from the negative copy check. |
| CVE-2026-53361 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Set gc_in_progress to true in unix_gc(). Igor Ushakov reported that unix_gc() could run with gc_in_progress being false if the work is scheduled while running: Thread 1 Thread 2 Thread 3 -------- -------- -------- unix_schedule_gc() unix_schedule_gc() `- if (!gc_in_progress) `- if (!gc_in_progress) |- gc_in_progress = true | `- queue_work() | unix_gc() <----------------/ | | |- gc_in_progress = true ... `- queue_work() | | `- gc_in_progress = false | | unix_gc() <---------------------------------------------' | ... /* gc_in_progress == false */ | `- gc_in_progress = false unix_peek_fpl() relies on gc_in_progress not to confuse GC by MSG_PEEK. Let's set gc_in_progress to true in unix_gc(). |
| CVE-2026-53358 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen() l2cap_chan_close() removes the channel from conn->chan_l, which must be done under conn->lock. cleanup_listen() runs under the parent sk_lock, so acquiring conn->lock would invert the established conn->lock -> chan->lock -> sk_lock order. Instead of calling l2cap_chan_close() directly, schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. The timeout handler already acquires conn->lock and chan->lock in the correct order. The timer is only armed when chan->conn is still set: if it is already NULL, l2cap_conn_del() has already processed this channel (l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb), so there is nothing left to do. If l2cap_conn_del() races in after the timer is armed, __clear_chan_timer() inside l2cap_chan_del() cancels it; if the timer has already fired, the handler returns harmlessly because chan->conn was cleared. |
| CVE-2026-53356 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix phys BO pread/pwrite with offset sg_page() returns struct page pointer not (void *) so the scaling of pread/pwrite is wrong for phys BO and wrong parts of BO would be accessed if non-zero offset is used. Last impacted platform with overlay or cursor planes using phys mapping was Gen3/945G/Lakeport. (cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6) |
| CVE-2026-53355 | In the Linux kernel, the following vulnerability has been resolved: net: rds: clear i_sends on setup unwind The RDS IB connection teardown path is written so it can run during partial startup and on repeated shutdown attempts. It uses NULL pointers to distinguish resources that are still owned from resources that have already been released. When rds_ib_setup_qp() fails after allocating i_sends but before allocating i_recvs, the sends_out path frees i_sends without clearing the pointer. A later shutdown pass can still treat that stale pointer as a live send ring allocation. Clear i_sends after vfree() in the error unwind path so the existing shutdown logic continues to use the correct ownership state. |
| CVE-2026-53354 | In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Mitigate TLBI errata on various Arm CPUs A number of CPUs developed by Arm suffer from errata whereby a broadcast TLBI;DSB sequence may complete before the global observation of writes which are translated by an affected TLB entry. These errata ONLY affect the completion of memory accesses which have been translated by an invalidated TLB entry, and these errata DO NOT affect the actual invalidation of TLB entries. TLB entries are removed correctly. This issue has been assigned CVE ID CVE-2025-10263. To mitigate this issue, Arm recommends that software follows any affected TLBI;DSB sequence with an additional TLBI;DSB, which will ensure that all memory write effects affected by the first TLBI have been globally observed. The additional TLBI can use any operation that is broadcast to affected CPUs, and the additional DSB can use any option that is sufficient to complete the additional TLBI. The ARM64_WORKAROUND_REPEAT_TLBI workaround is sufficient to mitigate the issue. Enable this workaround for affected CPUs, and update the silicon errata documentation accordingly. Note that due to the manner in which Arm develops IP and tracks errata, some CPUs share a common erratum number. |
| CVE-2026-53353 | In the Linux kernel, the following vulnerability has been resolved: hsr: Remove WARN_ONCE() in hsr_addr_is_self(). syzbot reported the warning [0] in hsr_addr_is_self(), whose assumption is simply wrong. hsr->self_node is cleared in hsr_del_self_node(), which is called from hsr_dellink(). Since dev->rtnl_link_ops->dellink() is called before unregister_netdevice_many(), there is a window when user can find the device but without hsr->self_node. Let's remove WARN_ONCE() in hsr_addr_is_self(). [0]: HSR: No self node WARNING: net/hsr/hsr_framereg.c:39 at hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39, CPU#0: syz.4.16848/17220 Modules linked in: CPU: 0 UID: 0 PID: 17220 Comm: syz.4.16848 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 RIP: 0010:hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39 Code: 33 2f 41 0f b7 dd 89 ee 09 de 31 ff e8 c8 b4 c6 f6 09 dd 74 54 e8 0f b0 c6 f6 31 ed eb 53 e8 06 b0 c6 f6 48 8d 3d 2f 50 9c 04 <67> 48 0f b9 3a 31 ed eb 42 e8 c1 13 1f 00 89 c5 31 ff 89 c6 e8 96 RSP: 0018:ffffc900041c70e0 EFLAGS: 00010283 RAX: ffffffff8afdc6ca RBX: ffffffff8afdc4e6 RCX: 0000000000080000 RDX: ffffc90010493000 RSI: 0000000000000948 RDI: ffffffff8f9a1700 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc900041c71e8 R11: fffff52000838e3f R12: dffffc0000000000 R13: ffff888041f9e3c0 R14: ffff888086ee3802 R15: 0000000000000000 FS: 00007f6fe985d6c0(0000) GS:ffff888126176000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f80bd437dac CR3: 0000000025096000 CR4: 00000000003526f0 DR0: ffffffffffffffff DR1: 00000000000001f8 DR2: 0000000000000002 DR3: ffffffffefffff15 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> check_local_dest net/hsr/hsr_forward.c:592 [inline] fill_frame_info net/hsr/hsr_forward.c:728 [inline] hsr_forward_skb+0xa11/0x2a80 net/hsr/hsr_forward.c:739 hsr_dev_xmit+0x253/0x370 net/hsr/hsr_device.c:236 __netdev_start_xmit include/linux/netdevice.h:5368 [inline] netdev_start_xmit include/linux/netdevice.h:5377 [inline] xmit_one net/core/dev.c:3888 [inline] dev_hard_start_xmit+0x2df/0x860 net/core/dev.c:3904 __dev_queue_xmit+0x1428/0x3900 net/core/dev.c:4870 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xcec/0x10b0 net/ipv4/ip_output.c:237 ip_send_skb net/ipv4/ip_output.c:1510 [inline] ip_push_pending_frames+0x8b/0x110 net/ipv4/ip_output.c:1530 raw_sendmsg+0x1547/0x1a50 net/ipv4/raw.c:659 sock_sendmsg_nosec net/socket.c:787 [inline] __sock_sendmsg net/socket.c:802 [inline] ____sys_sendmsg+0x7da/0x9c0 net/socket.c:2698 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2752 __sys_sendmsg net/socket.c:2784 [inline] __do_sys_sendmsg net/socket.c:2789 [inline] __se_sys_sendmsg net/socket.c:2787 [inline] __x64_sys_sendmsg+0x1c3/0x2a0 net/socket.c:2787 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f6feb62ce59 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6fe985d028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6feb8a6090 RCX: 00007f6feb62ce59 RDX: 0000000000000000 RSI: 0000200000000000 RDI: 0000000000000004 RBP: 00007f6feb6c2d6f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f6feb8a6128 R14: 00007f6feb8a6090 R15: 00007ffcf01cc488 </TASK> |
| CVE-2026-53352 | In the Linux kernel, the following vulnerability has been resolved: signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads() When a multi-threaded process receives a stop signal (e.g., SIGSTOP), do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all threads and sets signal->group_stop_count to the number of threads. If one of the threads concurrently calls execve(), de_thread() invokes zap_other_threads() to kill all other threads. zap_other_threads() aborts the pending group stop by resetting signal->group_stop_count to 0 and clears the JOBCTL_PENDING_MASK for all other threads. However, it fails to clear the job control flags for the calling thread. When execve() completes, the calling thread returns to user mode and checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag, it calls do_signal_stop(), which invokes task_participate_group_stop(). Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the already-zero signal->group_stop_count, triggering a warning: sig->group_stop_count == 0 WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373 task_participate_group_stop+0x215/0x2d0 Call Trace: <TASK> do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619 get_signal+0xa8c/0x1330 kernel/signal.c:2884 arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98 do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix this race condition by clearing the JOBCTL_PENDING_MASK for the calling thread in zap_other_threads(), ensuring it does not retain any stale job control state after the thread group is destroyed. This aligns with other functions that tear down a thread group and abort group stops, such as zap_process() and complete_signal(), which correctly clear these flags for all threads including the current one. |
| CVE-2026-53350 | In the Linux kernel, the following vulnerability has been resolved: ASoC: wm_adsp: Fix NULL dereference when removing firmware controls In wm_adsp_control_remove() check that the priv pointer is not NULL before attempting to cleanup what it points to. When cs_dsp creates a control it calls wm_adsp_control_add_cb() so that wm_adsp can create its own private control data. There are two cases where private data is not created: 1. The control is a SYSTEM control, so an ALSA control is not created. 2. The codec driver has registered a control_add() callback that hides the control, so wm_adsp_control_add() is not called. When cs_dsp_remove destroys its control list it calls wm_adsp_control_remove() for each control. But wm_adsp_control_remove() was attempting to cleanup the private data pointed to by cs_ctl->priv without checking the pointer for NULL. |
| CVE-2026-53349 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: destroy stale expectfn expectations on unregister NAT helpers such as nf_nat_h323 store a raw pointer to module text in exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister() only unlinks the callback descriptor and never walks the expectation table, so an expectation pending at module removal survives with a dangling exp->expectfn into freed module text. When the expected connection arrives, init_conntrack() invokes exp->expectfn(), now a stale pointer into the unloaded module. Reproduced on a KASAN build by loading the H.323 helpers, creating a Q.931 expectation, unloading nf_nat_h323, then connecting to the expected port: Oops: int3: 0000 [#1] SMP KASAN NOPTI RIP: 0010:0xffffffffa06102d1 init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862) nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049) ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223) nf_hook_slow (net/netfilter/core.c:619) __ip_local_out (net/ipv4/ip_output.c:120) __tcp_transmit_skb (net/ipv4/tcp_output.c:1715) tcp_connect (net/ipv4/tcp_output.c:4374) tcp_v4_connect (net/ipv4/tcp_ipv4.c:345) __sys_connect (net/socket.c:2167) Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323] Reaching the dangling state requires CAP_SYS_MODULE in the initial user namespace to remove a NAT helper that still has live expectations, so this is a robustness fix; leaving an expectation pointing at freed text is wrong regardless. Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and drops every expectation whose ->expectfn matches the descriptor being torn down. Call it from each NAT helper's exit path after the existing RCU grace period, so no expectation outlives the code it points at and no extra synchronize_rcu() is introduced. With the fix, the same reproducer runs to completion without the Oops. |
| CVE-2026-53347 | In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix driver removal with disabled KMS DRM atomic and modesetting aren't initialized if virtio-gpu driver built with disabled KMS, leading to access of uninitialized data on driver removal/unbinding and crashing kernel. Fix it by skipping shutting down atomic core with unavailable KMS. |
| CVE-2026-53345 | In the Linux kernel, the following vulnerability has been resolved: KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying When marking a page dirty, complain about not having a running/loaded vCPU if and only if the VM is still alive, i.e. its refcount is non-zero. This will allow fixing a memory leak for x86 SEV-ES guests without hitting what is effectively a false positive on the WARN. For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page across an exit to userspace, and typically unmaps the page on the next KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM needs to unmap the page when the vCPU is destroyed, which in turn triggers the WARN about not having a running vCPU. Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN, as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons; suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But loading a vCPU during destruction is gross (ideally nVMX code would be cleaned up), risks complicating the SEV-ES code (KVM would need to ensure the temporarily load()+put() only runs when the vCPU isn't already loaded), and is ultimately pointless. The motivation for the WARN is to guard against KVM dirtying guest memory without pushing the corresponding GFN to the active vCPU's dirty ring, e.g. to ensure userspace doesn't miss a dirty page. But for the VM's refcount to reach zero, there can't be _any_ userspace mappings to the dirty ring, as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if userspace had a valid mapping for the dirty ring, then the vCPU file and thus the owning VM would still be alive. And so since userspace can't possibly reach the dirty ring, whether or not KVM technically "misses" a push to the dirty ring is irrelevant. |
| CVE-2026-53343 | In the Linux kernel, the following vulnerability has been resolved: ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in __switch_to(). The read uses ldr, but the KASAN shadow address is byte-granular and is not guaranteed to be word aligned. ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to() with an alignment exception before reaching init. Use ldrb for the dummy shadow access. The code only needs to fault in the shadow mapping if the stack shadow is missing, so a byte load is sufficient and matches the granularity of KASAN shadow memory. |
| CVE-2026-53339 | In the Linux kernel, the following vulnerability has been resolved: i2c: qcom-cci: Fix NULL pointer dereference in cci_remove() On all modern platforms Qualcomm CCI controller provides two I2C masters, and on particular boards only one I2C master may be initialized, and in such cases the device unbinding or driver removal causes a NULL pointer dereference, because cci_halt() is called for all two I2C masters, but a completion is initialized only for the single enabled master: % rmmod i2c-qcom-cci Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 <snip> Call trace: __wait_for_common+0x194/0x1a8 (P) wait_for_completion_timeout+0x20/0x2c cci_remove+0xc4/0x138 [i2c_qcom_cci] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci] .... |
| CVE-2026-53337 | In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL pointer dereference in bond_do_ioctl() In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which can return NULL if the requested interface name does not exist. However, the subsequent slave_dbg() call is placed before the NULL check: slave_dev = __dev_get_by_name(net, ifr->ifr_slave); slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here if (!slave_dev) return -ENODEV; The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt, (slave_dev)->name, ...) which unconditionally dereferences slave_dev->name before the NULL check is performed. This results in a NULL pointer dereference kernel oops when a user calls bonding ioctl (e.g. SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave interface name. This is reachable from userspace via the bonding ioctl interface with CAP_NET_ADMIN capability, making it a potential local denial-of-service vector. Fix by moving the slave_dbg() call after the NULL check. |
| CVE-2026-53336 | In the Linux kernel, the following vulnerability has been resolved: nvmem: layouts: onie-tlv: fix hang on unknown types The EEPROM on my board has a vendor specific entry of type 0x41. When stumbling upon that, this driver hangs in an endless loop. Fix it by keep incrementing the offset on unknown entries, so the loop will eventually stop. |
| CVE-2026-53332 | In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture. |
| CVE-2026-53331 | In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock); The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg(). Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed. Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock. |
| CVE-2026-53329 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Use krealloc_array() in dal_vector_reserve() [Why & How] dal_vector_reserve() computes the allocation size as "capacity * vector->struct_size" using uint32_t arithmetic, which can silently wrap to a small value on overflow. This would cause krealloc to return a smaller buffer than expected, leading to heap overflows on subsequent vector appends. Replace krealloc() with krealloc_array() which performs an internal overflow check and returns NULL on wrap, preventing the issue. (cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) |
| CVE-2026-53327 | In the Linux kernel, the following vulnerability has been resolved: debugobjects: Do not fill_pool() if pi_blocked_on On RT enabled kernels, fill_pool() ends up calling rtlock_lock(), which asserts if current::pi_blocked_on is set, because a task can obviously only block on one lock as otherwise the priority inheritenace chain gets corrupted. Prevent this by expanding the conditional to take current::pi_blocked_on into account. |
| CVE-2026-53325 | In the Linux kernel, the following vulnerability has been resolved: agp/amd64: Fix broken error propagation in agp_amd64_probe() A NULL pointer dereference was observed in the AMD64 AGP driver when running in a virtualized environment (e.g. qemu/kvm) without a physical AMD northbridge. The crash occurs in amd64_fetch_size() when attempting to dereference the pointer returned by node_to_amd_nb(0). The root cause of this crash is broken error propagation in agp_amd64_probe(): When no AMD northbridges are found, cache_nbs() correctly returns -ENODEV. However, the probe function erroneously checks the return value against exactly -1, rather than < 0. As a result, the hardware absence error is masked, allowing the driver to improperly proceed with initialization. It eventually calls agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware does not exist, node_to_amd_nb(0) returns NULL, leading to a General Protection Fault (GPF) when accessing its ->misc member. Fix the issue by correcting the error check in agp_amd64_probe() to abort properly when cache_nbs() returns any negative error code. This prevents the driver from erroneously proceeding without hardware, thereby avoiding the subsequent NULL pointer dereference at its source. |
| CVE-2026-53313 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths In dc_dmub_srv_log_diagnostic_data() and dc_dmub_srv_enable_dpia_trace(). Both functions check: if (!dc_dmub_srv || !dc_dmub_srv->dmub) and then call DC_LOG_ERROR() inside that block. DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if dc_dmub_srv is NULL, the logging itself can dereference a NULL pointer and cause a crash. Fix this by splitting the checks. First check if dc_dmub_srv is NULL and return immediately. Then check dc_dmub_srv->dmub and log the error only when dc_dmub_srv is valid. Fixes the below: ../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961) ../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166) |
| CVE-2026-53275 | In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix use-after-free when processing MLD queries When processing an MLD query, a pointer to the multicast group address is retrieved when initially parsing the packet. This pointer is later dereferenced without being reloaded despite the fact that the skb header might have been reallocated following the pskb_may_pull() calls, leading to a use-after-free [1]. Fix by copying the multicast group address when the packet is initially parsed. [1] BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512) Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118 Workqueue: mld mld_query_work Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_address_description.constprop.0 (mm/kasan/report.c:378) print_report (mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) __mld_query_work (net/ipv6/mcast.c:1512) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> [...] Freed by task 118: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566) pskb_expand_head (net/core/skbuff.c:2335) __pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4)) __mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1)) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) |
| CVE-2026-53274 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS A logic flaw in __smc_setsockopt() allows a local unprivileged user to cause a Denial of Service (DoS) by holding the socket lock indefinitely. The function __smc_setsockopt() calls copy_from_sockptr() while holding lock_sock(sk). By passing a userfaultfd-monitored memory page (or FUSE-backed memory on systems where unprivileged userfaultfd is disabled) as the optval, an attacker can halt execution during the copy operation, keeping the lock held. Combined with asynchronous tear-down operations like shutdown(), this exhausts the kernel wq (kworkers) and triggers the hung task watchdog. [ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds. [ 240.123489] Call Trace: [ 240.123501] smc_shutdown+... [ 240.123512] lock_sock_nested+... This patch moves the user-space copy outside the lock_sock() critical section to prevent the issue. |
| CVE-2026-53273 | In the Linux kernel, the following vulnerability has been resolved: tee: optee: prevent use-after-free when the client exits before the supplicant Commit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made the client wait as killable so it can be interrupted during shutdown or after a supplicant crash. This changes the original lifetime expectations: the client task can now terminate while the supplicant is still processing its request. If the client exits first it removes the request from its queue and kfree()s it, while the request ID remains in supp->idr. A subsequent lookup on the supplicant path then dereferences freed memory, leading to a use-after-free. Serialise access to the request with supp->mutex: * Hold supp->mutex in optee_supp_recv() and optee_supp_send() while looking up and touching the request. * Let optee_supp_thrd_req() notice that the client has terminated and signal optee_supp_send() accordingly. With these changes the request cannot be freed while the supplicant still has a reference, eliminating the race. |
| CVE-2026-53270 | In the Linux kernel, the following vulnerability has been resolved: ipvs: clear the svc scheduler ptr early on edit ip_vs_edit_service() while unbinding the old scheduler clears the svc->scheduler ptr after the scheduler module initiates RCU callbacks. This can cause packets to use the old scheduler at the time when svc->sched_data is already freed after RCU grace period. Fix it by clearing the ptr early in ip_vs_unbind_scheduler(), before the done_service method schedules any RCU callbacks. Also, if the new scheduler fails to initialize when replacing the old scheduler, try to restore the old scheduler while still returning the error code. |
| CVE-2026-53269 | In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: add mutex to guard hook reference counting As the synproxy infrastructure register netfilter hooks on-demand when a user adds the first iptables target or nftables expression, if done concurrently they can race each other. Introduce a mutex to serialize the refcount control blocks access from both frontends. While a per namespace mutex might be more efficient, it is not needed for target/expression like SYNPROXY. |
| CVE-2026-53268 | In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack_irc: fix possible out-of-bounds read When parsing fails after we've matched the command string we should bail out instead of trying to match a different command. This helper should be deprecated, given prevalence of TLS I doubt it has any relevance in 2026. |
| CVE-2026-53267 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: bail out on template ct in get eval I noticed this issue while looking at a historic syzbot report [1]. A rule like the one below is enough to trigger the bug: table ip t { chain pre { type filter hook prerouting priority raw; ct zone set 1 ct original saddr 1.2.3.4 accept } } The first expression attaches a per-cpu template ct via nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all zero, nf_ct_l3num(ct) == 0). The next expression then calls nft_ct_get_eval() on the same skb, treats the template as a real ct and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this overflows past struct nft_regs on the kernel stack; with smaller dreg values it silently clobbers adjacent registers. Reject template ct at the eval entry and in nft_ct_get_fast_eval(), mirroring the check nft_ct_set_eval() already has. Additionally, bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple before pkt_to_tuple() fills in only the protocol-relevant leading bytes, so the trailing bytes of tuple->{src,dst}.u3.all are well-defined zero. priv->len is validated at rule load, so the copy size is now bounded by the destination register rather than by an untrusted field on the conntrack. [1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c |
| CVE-2026-53266 (KEV) | In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits(). |
| CVE-2026-53265 | In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: check allocation under invalidate lock commit 2d1f7b65f5de ("dm cache policy smq: fix missing locks in invalidating cache blocks") added mq->lock around the destructive part of smq_invalidate_mapping(), but left the e->allocated check outside the critical section. That leaves a check-then-act race. Two concurrent invalidators can both observe e->allocated as true before either of them takes mq->lock. The first invalidator that acquires the lock removes the entry from the queues and hash table and then calls free_entry(), which clears e->allocated and puts the entry back on the free list. The second invalidator can then acquire mq->lock and continue with the stale result of the unlocked check. This can corrupt the SMQ queues or hash table by deleting an entry that is no longer on those structures. It can also hit the allocation check in free_entry() when the same entry is freed again. Move the allocation check under mq->lock so the predicate and the destructive operations are serialized by the same lock. |
| CVE-2026-53264 | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: use RCU with deferred freeing for action lifecycle When NEWTFILTER and DELFILTER are run concurrently it is possible to create a race with an associated action. Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER: 0: mutex_lock() <-- holds the idr lock 0: rcu_read_lock() 0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR) 0: mutex_unlock() <-- releases the idr lock 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) <-- Action removed from IDR 1: mutex_unlock() <-- mutex released allowing us to delete the action 1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memory This patch fixes the race condition between NEWTFILTER and DELFILTER by adding struct rcu_head to tc_action used in the deferral and introducing a call_rcu() in the delete path to defer the final kfree(). Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu") but also modernization/simplification to directly use kfree_rcu(). Let's illustrate the new restored code path: 0: rcu_read_lock() 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) 1: mutex_unlock() 1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period 0: p = idr_find(idr, index) 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0 1: rcu_read_unlock() <-- release so freeing can run after grace period After CPU1 calls idr_remove(), the object is no longer reachable through the IDR. CPU0's subsequent idr_find() will return NULL, and even if it still held a stale pointer, the immediate kfree() is now deferred until after the RCU grace period, so no UAF can occur. |
| CVE-2026-53263 | In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix off-by-one in multicast context address compression The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses &data[1] as destination and &ipaddr->s6_addr[11] as source, but both should be offset by one: &data[2] and &ipaddr->s6_addr[12] respectively. This off-by-one has two consequences: 1. data[1] is overwritten with s6_addr[11], corrupting the RIID field in the compressed multicast address 2. data[5] is never written, so uninitialized kernel stack memory is transmitted over the network via lowpan_push_hc_data(), leaking kernel stack contents The correct inline data layout must match what the decompression function lowpan_uncompress_multicast_ctx_daddr() expects: data[0..1] = s6_addr[1..2] (flags/scope + RIID) data[2..5] = s6_addr[12..15] (group ID) Also zero-initialize the data array as a defensive measure against similar bugs in the future. |
| CVE-2026-53262 | In the Linux kernel, the following vulnerability has been resolved: l2tp: pppol2tp: hold reference to session in pppol2tp_ioctl() pppol2tp_ioctl() read sock->sk->sk_user_data directly without any locks or reference counting. If a controllable sleep was induced during copy_from_user() (e.g. via a userfaultfd page fault sleep), a concurrent socket close could trigger pppol2tp_session_close() asynchronously. This frees the l2tp_session structure via the l2tp_session_del_work workqueue. Upon resuming, the ioctl thread dereferences the stale session pointer, resulting in a Use-After-Free (UAF). Fix this by securely fetching the session reference using the RCU-safe, refcounted helper pppol2tp_sock_to_session(sk) on entry. This locks the session's refcount across the sleep. We structured the function to exit via standard err breaks, guaranteeing that l2tp_session_put() is cleanly called on all return paths to drop the reference. To preserve existing behavior we validate the session and its magic signature only for the specific L2TP commands that require it. This ensures that generic/unknown ioctls called on an unconnected socket still return -ENOIOCTLCMD and correctly fall back to generic handlers (e.g. in sock_do_ioctl()). |
| CVE-2026-53261 | In the Linux kernel, the following vulnerability has been resolved: devlink: Release nested relation on devlink free devlink relation state is normally released from devl_unregister(), which calls devlink_rel_put(). This misses devlink instances that get a nested relation before registration and then fail probe before devl_register() is reached. That flow can happen for SFs. The child devlink gets linked to its parent before registration, then a later probe error calls devlink_free() directly. Since the instance was never registered, devl_unregister() is not called and devlink->rel is leaked. Release any pending relation from devlink_free() as well. The registered path is unchanged because devl_unregister() already clears devlink->rel before devlink_free() runs. |
| CVE-2026-53256 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind() rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock, but returns the selected listener after dropping that lock without taking a reference. rfcomm_connect_ind() then locks the listener, queues a child socket on it, and may notify it after unlocking it. The buggy scenario involves two paths, with each column showing the order within that path: rfcomm_connect_ind(): listener close: 1. Find parent in 1. close() enters rfcomm_get_sock_by_channel() rfcomm_sock_release(). 2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown() without pinning parent. closes the listener. 3. Call lock_sock(parent) and 3. rfcomm_sock_kill() bt_accept_enqueue(parent, unlinks and puts parent. sk, true). 4. Read parent flags and may 4. parent can be freed. call sk_state_change(). If close wins the race, parent can be freed before rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the deferred-setup callback. Take a reference on the listener before leaving rfcomm_sk_list.lock. After lock_sock() succeeds, recheck that it is still in BT_LISTEN before queueing a child, cache the deferred-setup bit while the parent is locked, and drop the reference after the last parent use. KASAN reported a slab-use-after-free in lock_sock_nested() from rfcomm_connect_ind(), with the freeing stack going through rfcomm_sock_kill() and rfcomm_sock_release(). |
| CVE-2026-53255 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate advertising TLV before type checks tlv_data_is_valid() reads each advertising data field length from data[i], then inspects data[i + 1] for managed EIR types before checking that the current field still fits inside the supplied buffer. A malformed field whose length byte is the last byte of the buffer can therefore make the parser read one byte past the advertising data. KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING request reached that path: BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid() Read of size 1 Call trace: tlv_data_is_valid() add_advertising() hci_mgmt_cmd() hci_sock_sendmsg() Move the existing element-length check before any type-octet inspection so each non-empty element is proven to contain its type byte before the parser looks at data[i + 1]. |
| CVE-2026-53254 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: validate skb length in MCC handlers The RFCOMM MCC handlers cast skb->data to protocol-specific structs without validating skb->len first. A malicious remote device can send truncated MCC frames and trigger out-of-bounds reads in these handlers. Fix this by using skb_pull_data() to validate and access the required data before dereferencing it. rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows 1-byte RPN requests. Handle this by validating only the DLCI byte first, and validating the full struct only when len > 1. |
| CVE-2026-53253 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: reject short frames before parsing A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the packet type byte immediately and, for control packets, reads the control opcode and setup UUID-size byte before proving that those bytes are present. bnep_rx_control() also dereferences the control opcode without rejecting an empty control payload. Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL return gates each dereference. Split the control handler so the frame path can pass an opcode that has already been pulled, and keep the byte-buffer wrapper for extension control payloads. For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the setup payload. struct bnep_setup_conn_req carries destination and source service UUIDs after that byte, each uuid_size bytes, so the parser now documents that tuple explicitly instead of leaving the pull length as an opaque multiplication. Validation reproduced this kernel report: KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790 The buggy address belongs to the object at ffff88800c0f7908 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 1-byte region [ffff88800c0f7908, ffff88800c0f7909) Read of size 1 Call trace: dump_stack_lvl+0xb3/0x140 (?:?) print_address_description+0x57/0x3a0 (?:?) bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306) print_report+0xb9/0x2b0 (?:?) __virt_addr_valid+0x1ba/0x3a0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) kasan_addr_to_slab+0x21/0x60 (?:?) kasan_report+0xe0/0x110 (?:?) process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200) worker_thread+0x65c/0xe40 (?:?) __kthread_parkme+0x184/0x230 (?:?) kthread+0x35e/0x470 (?:?) _raw_spin_unlock_irq+0x28/0x50 (?:?) ret_from_fork+0x586/0x870 (?:?) __switch_to+0x74f/0xdc0 (?:?) ret_from_fork_asm+0x1a/0x30 (?:?) |
| CVE-2026-53252 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix memory leak in error path of hci_alloc_dev() Early failures in Bluetooth HCI UART configuration leak SRCU percpu memory. When device initialization fails before hci_register_dev() completes, the HCI_UNREGISTER flag is never set. As a result, when the device reference count reaches zero, bt_host_release() evaluates this flag as false and falls back to a direct kfree(hdev). Because hci_release_dev() is bypassed, the SRCU struct initialized early in hci_alloc_dev() is never cleaned up, resulting in a leak of percpu memory. Fix the leak by explicitly calling cleanup_srcu_struct() in the fallback (unregistered) branch of bt_host_release() before freeing the device. |
| CVE-2026-53251 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync hci_get_route() returns a reference-counted hci_dev pointer via hci_dev_hold(). The function exits normally or with an error without ever releasing it. |
| CVE-2026-53250 | In the Linux kernel, the following vulnerability has been resolved: xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata() The TX metadata area resides in the UMEM buffer which is memory-mapped and concurrently writable by userspace. In xsk_skb_metadata(), csum_start and csum_offset are read from shared memory for bounds validation, then read again for skb assignment. A malicious userspace application can race to overwrite these values between the two reads, bypassing the bounds check and causing out-of-bounds memory access during checksum computation in the transmit path. Fix this by reading csum_start and csum_offset into local variables once, then using the local copies for both validation and assignment. Note that other metadata fields (flags, launch_time) and the cached csum fields may be mutually inconsistent due to concurrent userspace writes, but this is benign: the only security-critical invariant is that each field's validated value is the same one used, which local caching guarantees. |
| CVE-2026-53249 | In the Linux kernel, the following vulnerability has been resolved: ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options This patch restricts setting Loose Source and Record Route (LSRR) and Strict Source and Record Route (SSRR) IP options to users with CAP_NET_RAW capability. This prevents unprivileged applications from forcing packets to route through attacker-controlled nodes to leak TCP ISN and possibly other protocol information. While LSRR and SSRR are commonly filtered in many network environments, they may still be supported and forwarded along some network paths. RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing IPv4 Options) recommend to drop these options in 4.3 and 4.4. |
| CVE-2026-53245 | In the Linux kernel, the following vulnerability has been resolved: net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr In mrp_pdu_parse_vecattr(), vector attribute events are encoded three per byte and valen tracks the number of events left to process. The parser decrements valen after processing the first and second events from each event byte, but not after processing the third one. When valen is exactly a multiple of three, the loop continues after the last valid event and consumes the next byte as a new event byte, applying a spurious event to the MRP applicant state. Additionally, when valen is zero the parser unconditionally consumes attrlen bytes as FirstValue and advances the offset, even though per IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of zero and no FirstValue or Vector fields. This corrupts the offset for subsequent PDU parsing. Also, when valen exceeds three the loop crosses byte boundaries but the attribute value is not incremented between the last event of one byte and the first event of the next. This causes the first event of the next byte to use the same attribute value as the third event rather than the next consecutive value. Decrement valen after processing the third event, skip FirstValue consumption when valen is zero, and increment the attribute value at the end of each loop iteration. |
| CVE-2026-53242 | In the Linux kernel, the following vulnerability has been resolved: ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams snd_pcm_drain() uses init_waitqueue_entry which does not clear entry.prev/next, and add_wait_queue with a conditional remove_wait_queue that is skipped when to_check is no longer in the group after concurrent UNLINK. The orphaned wait entry remains on the unlinked substream sleep queue. On the next drain iteration, add_wait_queue adds the entry to a new queue while still linked on the old one, corrupting both lists. A subsequent wake_up dereferences NULL at the func pointer (mapped from the spinlock at offset 0 of the misinterpreted wait_queue_head_t), causing a kernel panic. Replace init_waitqueue_entry/add_wait_queue/conditional remove_wait_queue with init_wait_entry/prepare_to_wait/ finish_wait. init_wait_entry clears prev/next via INIT_LIST_HEAD on each iteration and sets autoremove_wake_function which auto-removes the entry on wake-up. finish_wait safely handles both the already-removed and still-queued cases. |
| CVE-2026-53239 | In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx() Fix the race by pruning the bin while still holding xfrm_policy_lock, before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since the lock is already held. The wrapper xfrm_policy_inexact_prune_bin() becomes unused and is removed. Race: CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO) ========================== ========================== xfrm_policy_bysel_ctx(): spin_lock_bh(xfrm_policy_lock) bin = xfrm_policy_inexact_lookup() __xfrm_policy_unlink(pol) spin_unlock_bh(xfrm_policy_lock) xfrm_policy_kill(ret) // wide window, lock not held xfrm_hash_rebuild(): spin_lock_bh(xfrm_policy_lock) __xfrm_policy_inexact_flush(): kfree_rcu(bin) // bin freed spin_unlock_bh(xfrm_policy_lock) xfrm_policy_inexact_prune_bin(bin) // UAF: bin is freed |
| CVE-2026-53238 | In the Linux kernel, the following vulnerability has been resolved: netlabel: validate unlabeled address and mask attribute lengths netlbl_unlabel_addrinfo_get() used the address attribute length to determine whether the attribute data could be read as an IPv4 or IPv6 address, but did not independently validate the corresponding mask attribute length. A crafted Generic Netlink request could therefore provide a valid IPv4/IPv6 address attribute with a shorter mask attribute, which would later be read as a full struct in_addr or struct in6_addr. NLA_BINARY policy lengths are maximum lengths by default, so use NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask attributes. This rejects short attributes during policy validation and also exposes the exact length requirements through policy introspection. |
| CVE-2026-53237 | In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: fix NULL pointer dereference in suspend/resume mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO banks during suspend/resume, but not all banks have PWM functionality. GPIO banks without PWM have mvchip->mvpwm set to NULL. Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer dereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [<c05fd2ac>] lr : [<c05fd2ac>] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54 Add a NULL check for mvchip->mvpwm before calling the PWM suspend/resume functions. |
| CVE-2026-53236 | In the Linux kernel, the following vulnerability has been resolved: tcp: restrict SO_ATTACH_FILTER to priv users This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets to users with CAP_NET_ADMIN capability. This blocks potential side-channel attack where an unprivileged application attaches a filter to leak TCP sequence/acknowledgment numbers. |
| CVE-2026-53232 | In the Linux kernel, the following vulnerability has been resolved: net: phy: clean the sfp upstream if phy probing fails Sashiko reported that we don't call sfp_bus_del_upstream() in the probe failure path, so let's add it, otherwise the sfp-bus is left with a dangling 'upstream' field, that may be used later on during SFP events. This issue existed before the generic phylib sfp support, back when drivers were calling phy_sfp_probe themselves. |
| CVE-2026-53230 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max. |
| CVE-2026-53229 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame() returns false (e.g. XDPSQ is full), the function returns without unmapping the DMA address or freeing the xdp_frame allocated by xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on success, so the completion path cannot recover these entries. With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind: DMA-API: pci 0000:08:00.0: device driver has pending DMA allocations while released from device [count=1116] One of leaked entries details: [device address=0x000000010ffd7028] [size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy] WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180 ... DMA-API: Mapped at: debug_dma_map_phys+0x4b/0xd0 dma_map_phys+0xfd/0x2d0 mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core] mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core] mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core] Add the missing unmap + xdp_return_frame, matching the cleanup already done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch, so no per-frag unmap is needed. |
| CVE-2026-53227 | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix possible kfree_skb of ERR_PTR After the patch in the "Fixes" tag, the allocation of the "reply" skb can happen either before or after locking the ovs_mutex. However, error cleanups still follow the classical reversed order, assuming "reply" is allocated before locking: it is freed after unlocking. If "reply" allocation happens after locking the mutex and it fails, "reply" is left with an ERR_PTR, and execution jumps to the correspondent cleanup stage which will try to free an invalid pointer. Fix this by setting the pointer to NULL after having saved its error value. |
| CVE-2026-53226 | In the Linux kernel, the following vulnerability has been resolved: gpio: rockchip: fix generic IRQ chip leak on remove The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe. However, on driver remove/teardown, the generic chips are not automatically freed when the IRQ domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global gc_list and may later be visited by generic IRQ chip suspend, resume, or shutdown callbacks after the GPIO bank has been removed, potentially resulting in a use-after-free and kernel crash. Fix the resource leak by explicitly calling irq_domain_remove_generic_chips() before removing the IRQ domain in rockchip_gpio_remove(). |
| CVE-2026-53223 | In the Linux kernel, the following vulnerability has been resolved: net: guard timestamp cmsgs to real error queue skbs skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb from sk_error_queue. That assumption is not true for AF_PACKET sockets: outgoing packet taps are also delivered to packet sockets with skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET instead of struct sock_exterr_skb. If such an skb is received with timestamping enabled, the generic timestamp cmsg path can read AF_PACKET control-buffer state as sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop counter overlaps opt_stats. An odd drop count makes the path emit SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear skbs this copies past the linear head and can trigger hardened usercopy or disclose adjacent heap contents. Keep skb_is_err_queue() local to net/socket.c, but make it verify that the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal receive ownership and no longer pass as error-queue skbs, while legitimate sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free ownership. |
| CVE-2026-53221 | In the Linux kernel, the following vulnerability has been resolved: ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup() In vti6_tnl_lookup(), when an exact match for a tunnel fails, the code falls back to searching for wildcard tunnels: - Tunnels matching the packet's local address, with any remote address wildcard remote). - Tunnels matching the packet's remote address, with any local address (wildcard local). However, vti6 stores all these different types of tunnels in the same hash table (ip6n->tnls_r_l) prone to hash collisions. The bug is that the fallback search loops in vti6_tnl_lookup() were missing checks to ensure that the candidate tunnel actually has a wildcard address. |
| CVE-2026-53220 | In the Linux kernel, the following vulnerability has been resolved: netfilter: revalidate bridge ports ebt_redirect_tg() dereferences br_port_get_rcu() return without a NULL check, causing a kernel panic when the bridge port has been removed between the original hook invocation and an NFQUEUE reinject. A mere NULL check isn't sufficient, however. As sashiko review points out userspace can not only remove the port from the bridge, it could also place the device in a different virtual device, e.g. macvlan. If this happens, we must drop the packet, there is no way for us to reinject it into the bridge path. Switch to _upper API, we don't need the bridge port structure. Also, this fix keeps another bug intact: Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER too aggressive, which prevents certain logging features when queueing in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old CONFIG_BRIDGE_NETFILTER cruft is off. Fixes tag is a common ancestor, this was always broken. |
| CVE-2026-53219 | In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: avoid leaking percpu counter pointers The native and compat get-entries paths copy the fixed rule entry header from the kernelized rule blob to userspace before overwriting the entry's counter fields with a sanitized counter snapshot. On SMP kernels, entry->counters.pcnt contains the percpu allocation address used by x_tables rule counters. A caller can provide a userspace buffer that faults during the initial fixed-header copy after pcnt has been copied but before the later sanitized counter copy runs. The syscall then returns -EFAULT while leaving the raw percpu pointer in userspace. Copy only the fixed entry prefix before counters from the kernelized rule blob, then copy the sanitized counter snapshot into the counter field. Apply this ordering to the IPv4, IPv6, and ARP native and compat get-entries implementations so a fault cannot expose the internal percpu counter pointer. |
| CVE-2026-53218 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_exthdr: fix register tracking for F_PRESENT flag nft_exthdr_init() passes user-controlled priv->len to nft_parse_register_store(), which marks that many bytes in the register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT is set, the eval paths write only 1 byte (nft_reg_store8) or 4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4, registers beyond the first are never written, retaining uninitialized stack data from nft_regs. Bail out if userspace requests too much data when F_PRESENT is set. |
| CVE-2026-53217 | In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: sync RX data at the hardware packet offset mvpp2 programs the RX queue packet offset, so hardware writes received data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the unused headroom and misses the same number of bytes at the packet tail. On non-coherent DMA systems this can leave the CPU reading stale cache contents for the end of the received frame. Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range offset so the sync covers the Marvell header and packet data actually written by hardware. |
| CVE-2026-53216 | In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: limit XDP frame size to the RX buffer mvpp2 has short and long BM pools, and short pool buffers can be smaller than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with PAGE_SIZE as frame size. XDP helpers use frame_sz to validate tail growth and to derive the hard end of the data area. Advertising PAGE_SIZE for short buffers can let bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting memory or later tripping skb tailroom checks. Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches the actual buffer backing the packet. |
| CVE-2026-53214 | In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix a potential NPD in cleanup_prefix_route() addrconf_get_prefix_route() can return the fib6_null_entry sentinel entry which has a NULL fib6_table pointer. Therefore, before setting the route's expiration time, check that we are not working with this entry, as otherwise a NPD will be triggered [1]. Note that the other callers of addrconf_get_prefix_route() are not susceptible to this bug: 1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF | RTF_PREFIX_RT' flags which are not set on fib6_null_entry. 2. modify_prefix_route(): Fixed by commit a747e02430df ("ipv6: avoid possible NULL deref in modify_prefix_route()"). 3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for fib6_null_entry and returns an error. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [...] Call Trace: <TASK> __kasan_check_byte (mm/kasan/common.c:573) lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1)) _raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1)) cleanup_prefix_route (net/ipv6/addrconf.c:1280) ipv6_del_addr (net/ipv6/addrconf.c:1342) inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119) inet6_rtm_deladdr (net/ipv6/addrconf.c:4812) rtnetlink_rcv_msg (net/core/rtnetlink.c:6997) netlink_rcv_skb (net/netlink/af_netlink.c:2555) netlink_unicast (net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1899) __sock_sendmsg (net/socket.c:802 (discriminator 4)) ____sys_sendmsg (net/socket.c:2698) ___sys_sendmsg (net/socket.c:2752) __sys_sendmsg (net/socket.c:2784) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| CVE-2026-53213 | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: fix krealloc() memory leak Don't just overwrite the original pointer passed to krealloc() with its return value without checking latter: MEM = krealloc(MEM, SZ, GFP); If krealloc() returns NULL, that erases the pointer to the still allocated memory, hence leaks this memory. Instead, use a temporary variable, check it's not NULL and only then assign it to the original pointer: TMP = krealloc(MEM, SZ, GFP); if (!TMP) return; MEM = TMP; While on it, use krealloc_array(). |
| CVE-2026-53210 | In the Linux kernel, the following vulnerability has been resolved: tee: shm: fix shm leak in register_shm_helper() register_shm_helper() allocates shm before calling iov_iter_npages(). If iov_iter_npages() returns 0, the function jumps to err_ctx_put and leaks shm. This can be triggered by TEE_IOC_SHM_REGISTER with struct tee_ioctl_shm_register_data where length is 0. Jump to err_free_shm instead. |
| CVE-2026-53209 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend Existing advertising instances can already hold the maximum extended advertising payload. When hci_adv_bcast_annoucement() prepends the Broadcast Announcement service data to that payload, the combined data may no longer fit in the temporary buffer used to rebuild the advertising data. Reject that case before copying the existing payload and report the failure through the device log. This keeps the existing advertising data intact and avoids overrunning the temporary buffer. |
| CVE-2026-53208 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR signaling packets up to the channel MTU and dispatches each command without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer within radio range can send a fixed-channel CID 0x0001 packet that is larger than MTUsig and contains many L2CAP_ECHO_REQ commands before pairing. In a real-radio stock-kernel run, one 681-byte signaling packet containing 168 zero-length ECHO_REQ commands made the target transmit 168 ECHO_RSP frames over about 220 ms. Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling packet containing packed ECHO_REQ commands. Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched. The Bluetooth Core spec wording for MTUExceeded says the reject identifier shall match the first request command in the packet, and that packets containing only responses shall be silently discarded. Linux intentionally deviates from that prescription: silently discarding desynchronizes the peer because the remote stack never learns its responses were dropped, and locating the first request command requires walking command headers past MTUsig, i.e. processing bytes from a packet we have already decided is too large to process. We therefore always emit one reject and use the identifier from the first command header, a single fixed-offset byte read. The unrestricted BR/EDR signaling parser and ECHO_REQ response path both trace to the initial git import; no later introducing commit is available for a Fixes tag. |
| CVE-2026-53205 | In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds checks for firmware log indices Add validation that read and write indices in the firmware log buffer are within valid bounds (< data_size) before using them. If out-of-bounds indices are encountered (from firmware), clamp them to safe values instead of proceeding with invalid offsets. This prevents potential out-of-bounds buffer access when firmware supplies invalid log indices. |
| CVE-2026-53202 | In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix signed integer truncation in IPC receive Fix potential buffer overflow where firmware-supplied data_size is cast to signed int before being used in min_t(). Large unsigned values (>= 0x80000000) become negative, causing unsigned wraparound and oversized memcpy operations that can overflow the stack buffer. Change min_t(int, ...) to min() as both values are unsigned and can be handled by min() without explicit cast. |
| CVE-2026-53199 | In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf netvsc_copy_to_send_buf() copies page buffer entries into the VMBus send buffer using phys_to_virt() on the entry PFN. Entries for the RNDIS header and the skb linear data come from kmalloc'd memory and are always in the kernel direct map, but entries for skb fragments reference page cache or user pages, which on 32-bit x86 with CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page phys_to_virt() returns an address outside the direct map and the subsequent memcpy() faults on the transmit softirq path, which is fatal. Map the pages with kmap_local_page() instead, handling two properties of the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries. The copy path only handles packets smaller than the send section size (6144 bytes by default); larger packets take the cp_partial path where only the RNDIS header is copied. So entries here are bounded by the section size and a copy is split at most once on 4K-page systems. On !CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and no mapping work is added. |
| CVE-2026-53198 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on conn->async_requests via setup_async_work(), with cancel_fn = smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock. When the request is cancelled, the worker frees the file_lock with locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never reaches release_async_work() -- the only site that unlinks the work from conn->async_requests and clears cancel_fn/cancel_argv. The work therefore stays matchable on async_requests with a live cancel_fn pointing at the freed file_lock, until connection teardown finally runs release_async_work(). smb2_cancel() fires cancel_fn unconditionally with no state guard, so a second SMB2_CANCEL for the same AsyncId, arriving in that window, re-runs smb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (cancelled branch) ... cache file_lock_cache of size 192 Reproduced on mainline with KASAN by an authenticated SMB client. Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callback cannot be fired a second time. |
| CVE-2026-53196 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in get_manuf_info() get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). [ johan: amend commit message; also check for short descriptors ] |
| CVE-2026-53195 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr() build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space. |
| CVE-2026-53194 | In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied. |
| CVE-2026-53190 | In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix dma_fence refcount leak on error in virtio_gpu_dma_fence_wait() dma_fence_unwrap_for_each() internally calls dma_fence_unwrap_first() which does cursor->chain = dma_fence_get(head), taking an extra reference. On normal loop completion, dma_fence_unwrap_next() releases this via dma_fence_chain_walk() -> dma_fence_put(). When virtio_gpu_do_fence_wait() fails and the function returns early from inside the loop, the cursor->chain reference is never released. This is the only caller in the entire kernel that does an early return inside dma_fence_unwrap_for_each. Add dma_fence_put(itr.chain) before the early return. |
| CVE-2026-53186 | In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: bound SRP_RSP sense copy by the received length srp_process_rsp() copies sense data from rsp->data + resp_data_len, where resp_data_len is the full 32-bit value supplied by the SRP target and is never checked against the number of bytes actually received (wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so at most 96 bytes are copied, but the source offset is not bounded. A malicious or compromised SRP target on the InfiniBand/RoCE fabric that the initiator has logged into can return an SRP_RSP with SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer is allocated at the target-chosen max_ti_iu_len, so the source of the sense copy lands past the bytes actually received; with resp_data_len near 0xFFFFFFFF it is gigabytes past the buffer and the read faults. Copy the sense data only if it has not been truncated, that is, only if the response header, the response data, and the sense region fit within the bytes actually received; otherwise drop the sense and log. The in-tree iSER and NVMe-RDMA receive paths already bound their parse by wc->byte_len; this brings ib_srp into line with them. |
| CVE-2026-53185 | In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_bvec_write_partial() zram_read_page() picks the sync or async backing device read path based on whether the parent bio is NULL. zram_bvec_write_partial() passes its parent bio down, so for ZRAM_WB slots the read is dispatched asynchronously and zram_read_page() returns 0 while the bio is still in flight. The caller then runs memcpy_from_bvec(), zram_write_page() and __free_page() on the buffer, leaving the async read to write into a freed page. zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d ("zram: fix synchronous reads") for the same reason; the write_partial counterpart was missed. |
| CVE-2026-53184 | In the Linux kernel, the following vulnerability has been resolved: udp: clear skb->dev before running a sockmap verdict On the UDP receive path skb->dev is repurposed as dev_scratch (the truesize/state cache set by udp_set_dev_scratch()), through the union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff. When a UDP socket is in a sockmap, sk_data_ready is sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor() (sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq. If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp, bpf_skc_lookup_tcp), bpf_skc_lookup() does: if (skb->dev) caller_net = dev_net(skb->dev); skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net() dereferences it as a struct net_device * and the kernel takes a general protection fault on a non-canonical address in softirq: Oops: general protection fault, probably for non-canonical address 0x1010000800004a0 CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full) RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline] RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047 Call Trace: <IRQ> bpf_prog_4675cb904b7071f8+0x12e/0x14e bpf_prog_run_pin_on_cpu+0xc6/0x1f0 sk_psock_verdict_recv+0x1ba/0x350 udp_read_skb+0x31a/0x370 sk_psock_verdict_data_ready+0x2e3/0x600 __udp_enqueue_schedule_skb+0x4c8/0x650 udpv6_queue_rcv_one_skb+0x3ec/0x740 udp6_unicast_rcv_skb+0x11d/0x140 ip6_protocol_deliver_rcu+0x61e/0x950 ip6_input_finish+0xa9/0x150 NF_HOOK+0x286/0x2f0 ip6_input+0x117/0x220 NF_HOOK+0x286/0x2f0 __netif_receive_skb+0x85/0x200 process_backlog+0x374/0x9a0 __napi_poll+0x4f/0x1c0 net_rx_action+0x3b0/0x770 handle_softirqs+0x15a/0x460 do_softirq+0x57/0x80 </IRQ> The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which skb_set_owner_sk_safe() set just above. |
| CVE-2026-53183 | In the Linux kernel, the following vulnerability has been resolved: mptcp: allow subflow rcv wnd to shrink In MPTCP connection, the `window` field in the TCP header refers to the MPTCP-level rcv_nxt and it's right edge should not move backward. Such constraint is enforced at DSS option generation time. At the same time, the TCP stack ensures independently that the TCP-level rcv wnd right's edge does not move backward. That in turn causes artificial inflating of the MPTCP rcv window when the incoming data is acked at the TCP level and is OoO in the MPTCP sequence space (or lands in the backlog). As a consequence, the incoming traffic can exceed the receiver rcvbuf size even when the sender is not misbehaving. Prevent such scenario forcibly allowing the TCP subflow to shrink the TCP-level rcv wnd regardless of the current netns setting. |
| CVE-2026-53182 | In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject oversized EMA RNR lists nl80211_parse_rnr_elems() stores the parsed element count in a u8-backed cfg80211_rnr_elems::cnt field and uses that count to size the flexible array allocation. Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches 255, before incrementing it again. This keeps the parser aligned with the data structure it fills and matches the existing bound check used by nl80211_parse_mbssid_elems(). |
| CVE-2026-53181 | In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix sk_ack_backlog leak on failed handshake When vmci_transport_recv_connecting_server() returns an error, vmci_transport_recv_listen() calls vsock_remove_pending() but never calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented permanently. Repeated handshake failures (malformed packets, queue pair alloc failure, event subscribe failure) cause sk_ack_backlog to climb toward sk_max_ack_backlog. Once it reaches the limit the listener permanently refuses all new connections with -ECONNREFUSED, a silent denial of service requiring a process restart to recover. The two existing sk_acceptq_removed() calls in af_vsock.c do not cover this path: line 764 checks vsock_is_pending() which returns false after vsock_remove_pending(), and line 1889 is only reached on successful accept(). Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on the error path. |
| CVE-2026-53177 | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer dereference PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs. |
| CVE-2026-53168 | In the Linux kernel, the following vulnerability has been resolved: fuse: reject fuse_notify() pagecache ops on directories The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the FUSE daemon to actively write/read pagecache contents. For directories with FOPEN_CACHE_DIR, the pagecache is used as kernel-internal cache storage, and userspace is not supposed to have direct access to this cache - in particular, fuse_parse_cache() will hit WARN_ON() if the cache contains bogus data. Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than regular files with -EINVAL. |
| CVE-2026-53167 | In the Linux kernel, the following vulnerability has been resolved: fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios can contain uninitialized data. Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already in the page cache and not wait for data from the FUSE daemon, treat !uptodate folios as if they weren't present. This only has security impact on systems that don't enable automatic zero-initialization of all page allocations via CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1. |
| CVE-2026-53163 | In the Linux kernel, the following vulnerability has been resolved: locking/rtmutex: Skip remove_waiter() when waiter is not enqueued syzbot triggered the following splat in remove_waiter() via FUTEX_CMP_REQUEUE_PI: KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f] class_raw_spinlock_constructor remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561 rt_mutex_start_proxy_lock+0x103/0x120 futex_requeue+0x10e4/0x20d0 __x64_sys_futex+0x34f/0x4d0 task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection, leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead of current in remove_waiter()") made this fatal. Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter() upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock() (where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to account for try_to_take_rt_mutex(). |
| CVE-2026-53161 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context There is a race between fastrpc_device_release() and the workqueue that processes DSP responses. When the user closes the file descriptor, fastrpc_device_release() frees the fastrpc_user structure. Concurrently, an in-flight DSP invocation can complete and fastrpc_rpmsg_callback() schedules context cleanup via schedule_work(&ctx->put_work). If the workqueue runs fastrpc_context_free() in parallel with or after fastrpc_device_release() has freed the user structure, it dereferences the freed fastrpc_user. Depending on the state of the context at the time of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to reconstruct the source permission bitmask needed for the qcom_scm_assign_mem() call that returns memory from the DSP VM back to HLOS. 3. fastrpc_free_map() acquires map->fl->lock to safely remove the map node from the fl->maps list. The resulting use-after-free manifests as: pc : fastrpc_buf_free+0x38/0x80 [fastrpc] lr : fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_put_wq+0x78/0xa0 [fastrpc] process_one_work+0x180/0x450 worker_thread+0x26c/0x388 Add kref-based reference counting to fastrpc_user. Have each invoke context take a reference on the user at allocation time and release it when the context is freed. Release the initial reference in fastrpc_device_release() at file close. Move the teardown of the user structure — freeing pending contexts, maps, mmaps, and the channel context reference — into the kref release callback fastrpc_user_free(), so that it runs only when the last reference is dropped, regardless of whether that happens at device close or after the final in-flight context completes. |
| CVE-2026-53160 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free race in fastrpc_map_create fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero) on this unprotected pointer. A concurrent MEM_UNMAP can free the map between the lock release and the kref operation, resulting in a use-after-free on the freed slab object. Restore the take_ref parameter to fastrpc_map_lookup so the reference is acquired atomically under fl->lock before the pointer is exposed to the caller. |
| CVE-2026-53159 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix DMA address corruption due to find_vma misuse fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided pointer and compute a DMA address offset. When the address falls in a gap before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows, corrupting the DMA address sent to the DSP. Replace find_vma() with vma_lookup(), which returns NULL when the address is not contained within any VMA. |
| CVE-2026-53158 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix NULL pointer dereference in rpmsg callback A NULL pointer dereference was observed on Hawi at boot when the DSP sends a glink message before fastrpc_rpmsg_probe() has completed initialization: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178 pc : _raw_spin_lock_irqsave+0x34/0x8c lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] ... Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] qcom_glink_native_rx+0x538/0x6a4 qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem] The faulting address 0x178 corresponds to the lock variable inside struct fastrpc_channel_ctx, confirming that cctx is NULL when fastrpc_rpmsg_callback() attempts to take the spinlock. There are two issues here. First, dev_set_drvdata() is called before spin_lock_init() and idr_init(), leaving a window where the callback can retrieve a valid cctx pointer but operate on an uninitialized spinlock. Second, the rpmsg channel becomes live as soon as the driver is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata() is called at all, resulting in dev_get_drvdata() returning NULL. Fix both issues by moving all cctx initialization ahead of dev_set_drvdata() so the structure is fully initialized before it becomes visible to the callback, and add a NULL check in fastrpc_rpmsg_callback() as a guard against any remaining window. |
| CVE-2026-53157 | In the Linux kernel, the following vulnerability has been resolved: net: phonet: free phonet_device after RCU grace period phonet_device_destroy() removes a phonet_device from the per-net device list with list_del_rcu(), but frees it immediately. RCU readers walking the same list can still hold a pointer to the object after it has been removed, leading to a slab-use-after-free. Use kfree_rcu(), matching the lifetime rule already used by phonet_address_del() for the same object type. |
| CVE-2026-53156 | In the Linux kernel, the following vulnerability has been resolved: nvmem: core: fix use-after-free bugs in error paths Fix several instances of error paths in which we call __nvmem_device_put() - which may end up freeing the underlying memory and other resources - and then keep on using the nvmem structure. Always put the reference to the nvmem device as the last step before returning the error code. |
| CVE-2026-53154 | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: restore reservation on error in hugetlb folio copy paths Two sites in mm/hugetlb.c allocate a hugetlb folio via alloc_hugetlb_folio() (consuming a VMA reservation) and then call copy_user_large_folio(), which became int-returning in commit 1cb9dc4b475c ("mm: hwpoison: support recovery from HugePage copy-on-write faults") and can now fail (e.g. -EHWPOISON on a hwpoisoned source page). On the failure path, folio_put() restores the global hugetlb pool count through free_huge_folio(), but the per-VMA reservation map entry is left marked consumed: - hugetlb_mfill_atomic_pte() resubmission path (UFFDIO_COPY) - copy_hugetlb_page_range() fork-time CoW path when hugetlb_try_dup_anon_rmap() fails (rare: pinned hugetlb anon folio under fork) User-visible effect: on UFFDIO_COPY into a private hugetlb VMA where the resubmission copy fails, the reservation for that address is leaked from the VMA's reserve map. A subsequent fault at the same address takes the no-reservation path, and under hugetlb pool pressure the task is SIGBUSed at an address it had previously reserved. The fork-time CoW path leaks the same way in the child VMA's reserve map, though it requires the much rarer combination of pinned hugetlb anon page + hwpoisoned source. Add the missing restore_reserve_on_error() call before folio_put() on both error paths. |
| CVE-2026-53150 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Reject zero-length property entries in validator tb_property_entry_valid() accepts entries with length == 0 for DIRECTORY, DATA, and TEXT types. A zero-length TEXT entry passes validation but causes an underflow in the null-termination logic: property->value.text[property->length * 4 - 1] = '\0'; When property->length is 0 this writes to offset -1 relative to the allocation. Reject zero-length entries early in the validator since they have no valid representation in the XDomain property protocol. |
| CVE-2026-53149 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Bound root directory content to block size __tb_property_parse_dir() does not check that content_offset + content_len fits within block_len for the root directory case. When rootdir->length equals or exceeds block_len - 2, the entry loop reads past the allocated property block. Add a bounds check after computing content_offset and content_len to reject directories whose content extends past the block. |
| CVE-2026-53148 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Clamp XDomain response data copy to allocation size tb_xdp_properties_request() derives the per-packet copy length from the response header without checking that it fits in the previously allocated data buffer. A malicious peer can set its length field larger than the declared data_length, causing memcpy to write past the kcalloc allocation. Clamp the per-packet copy length so that the cumulative offset never exceeds data_len. |
| CVE-2026-53147 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Validate XDomain request packet size before type cast tb_xdp_handle_request() casts the received packet buffer to protocol-specific structs without verifying that the allocation is large enough for the target type. A peer can send a minimal XDomain packet that passes the generic header length check but is shorter than the struct accessed after the cast, causing out-of- bounds reads from the kmemdup allocation. Plumb the packet length through xdomain_request_work and validate it against the expected struct size before each cast. |
| CVE-2026-53146 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Limit XDomain response copy to actual frame size tb_xdomain_copy() copies req->response_size bytes from the received packet buffer regardless of the actual frame size. When a short response arrives, this reads past the valid frame data in the DMA pool buffer into stale contents from previous transactions. Use the minimum of frame size and expected response size for the copy length. |
| CVE-2026-53144 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL dereference in get_queue_ids() When usr_queue_id_array is NULL and num_queues is non-zero, get_queue_ids() returns NULL. The callers check only IS_ERR() on the return value; since IS_ERR(NULL) == false the check passes, and suspend_queues() calls q_array_invalidate() which immediately dereferences NULL while iterating num_queues times. Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying num_queues > 0 with a zero queue_array_ptr, causing a kernel panic. A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op (q_array_invalidate never executes, and resume_queues already guards all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL) only when num_queues is non-zero and the pointer is absent; both callers already propagate IS_ERR() returns correctly to userspace. (cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) |
| CVE-2026-53143 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11 The v11 MQD manager incorrectly assigned the CP-compute variants of checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow. During CRIU checkpoint of an SDMA queue on Navi3x: - checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer, leaking 1536 bytes of adjacent GTT memory to userspace During CRIU restore: - restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer, corrupting 1536 bytes of adjacent GTT memory (often the ring buffer or neighboring MQDs) This is a copy-paste regression unique to v11. All other ASIC backends (cik, vi, v9, v10, v12) correctly use the SDMA-specific variants. Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly handle the smaller v11_sdma_mqd structure, matching the pattern used in other MQD managers. (cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c) |
| CVE-2026-53140 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix vaddr leak when indirect CSD has zeroed workgroups v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect buffer and the workgroup buffer and is expected to release them before returning. When any of the workgroup counts read from the buffer is zero, the function bailed out early and skipped the cleanup, leaking the vaddr mappings of both BOs. Jump to the cleanup path instead of returning directly, so the mappings are always dropped. |
| CVE-2026-53138 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93) |
| CVE-2026-53137 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size [Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) |
| CVE-2026-53136 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp VBIOS HDMI retimer register count to array size [Why & How] The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9] and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated before use, so a malformed VBIOS can specify values up to 255, causing an out-of-bounds heap write during driver probe. Clamp each register count to the destination array size using min_t() before the copy loops, in both get_integrated_info_v11() and get_integrated_info_v2_1(). (cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69) |
| CVE-2026-53135 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs [Why & How] dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc without checking for NULL. A connector can be connected but not bound to any CRTC (e.g. after hot-plug before the next atomic commit), causing a kernel crash when writing to the sdp_message debugfs node. The function also ignores the user-provided size argument and always passes 36 bytes to copy_from_user(), reading past the user buffer when size < 36. Fix both issues by: - Returning -ENODEV when connector->base.state or state->crtc is NULL - Clamping write_size to min(size, sizeof(data)) (cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300) |
| CVE-2026-53134 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fib: fix stale stack leak via the OIFNAME register For NFT_FIB_RESULT_OIFNAME the destination register is declared with len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail, RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one register via "*dest = 0". The remaining three registers are left as whatever was on the stack in nft_do_chain()'s struct nft_regs, and a downstream expression that loads the register span can leak that uninitialised kernel stack to userspace. The NFTA_FIB_F_PRESENT existence check has the same shape: it is only meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type while the eval stores a single byte via nft_reg_store8(), leaving the rest of the declared span stale. Fix both: - replace the bare "*dest = 0" in the eval with nft_fib_store_result(), which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already used on the other early-return path), and - restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its destination as a single u8, so the marked span matches the one byte the eval writes. |
| CVE-2026-53133 | In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix truncation for block sizes >= 4G When the iommu is used the linearization of the mapping can give a single block that is very large split across multiple SG entries. When __rdma_block_iter_next() reassembles the split SG entries it is overflowing the 32 bit stack values and computed the wrong DMA addresses for blocks after the truncation. Use the right types to hold DMA addresses. |
| CVE-2026-53132 | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix potential unbounded skb queue virtio_transport_inc_rx_pkt() checks vvs->rx_bytes + len > vvs->buf_alloc. virtio_transport_recv_enqueue() skips coalescing for packets with VIRTIO_VSOCK_SEQ_EOM. If fed with packets with len == 0 and VIRTIO_VSOCK_SEQ_EOM, a very large number of packets can be queued because vvs->rx_bytes stays at 0. Fix this by estimating the skb metadata size: (Number of skbs in the queue) * SKB_TRUESIZE(0) |
| CVE-2026-53131 | In the Linux kernel, the following vulnerability has been resolved: netfilter: require Ethernet MAC header before using eth_hdr() `ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and `hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)` after either assuming that the skb is associated with an Ethernet device or checking only that the `ETH_HLEN` bytes at `skb_mac_header(skb)` lie between `skb->head` and `skb->data`. Make these paths first verify that the skb is associated with an Ethernet device, that the MAC header was set, and that it spans at least a full Ethernet header before accessing `eth_hdr(skb)`. |
| CVE-2026-53113 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix memory leaks in beacon template setup The functions ath11k_mac_setup_bcn_tmpl_ema() and ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates but fail to free it when parameter setup returns an error. Since beacon templates must be released during normal execution, they must also be released in the error handling paths to prevent memory leaks. Fix this by using unified exit paths with proper cleanup in the respective error paths. Compile tested only. Issue found using a prototype static analysis tool and code review. |
| CVE-2026-53102 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req() mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to be freed eventually by mt76_mcu_skb_send_msg(). However, currently if an intermediate function fails before sending, the allocated skb is leaked. Specifically, mt76_connac_mcu_sta_wed_update() and mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory leak in the error path. Fix this by explicitly freeing the skb in these error paths. Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on mt7996_mcu_sta_key_tlv error") made a similar change. Compile tested only. Issue found using a prototype static analysis tool and code review. |
| CVE-2026-53090 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix ld_{abs,ind} failure path analysis in subprogs Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types. The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed. This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side. |
| CVE-2026-53089 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in offloaded map/prog info fill When querying info for an offloaded BPF map or program, bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns() obtain the network namespace with get_net(dev_net(offmap->netdev)). However, the associated netdev's netns may be racing with teardown during netns destruction. If the netns refcount has already reached 0, get_net() performs a refcount_t increment on 0, triggering: refcount_t: addition on 0; use-after-free. Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains valid, they cannot prevent the netns refcount from reaching zero. Fix this by using maybe_get_net() instead of get_net(). maybe_get_net() uses refcount_inc_not_zero() and returns NULL if the refcount is already zero, which causes ns_get_path_cb() to fail and the caller to return -ENOENT -- the correct behavior when the netns is being destroyed. |
| CVE-2026-53080 | In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL dereference of "old" filters before change() Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") TC filters are added to a shared block and published to datapath before their ->change() function is called. This is a problem for cls_fw: an invalid filter created with the "old" method can still classify some packets before it is destroyed by the validation logic added by Xiang. Therefore, insisting with repeated runs of the following script: # ip link add dev crash0 type dummy # ip link set dev crash0 up # mausezahn crash0 -c 100000 -P 10 \ > -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q & # sleep 1 # tc qdisc add dev crash0 egress_block 1 clsact # tc filter add block 1 protocol ip prio 1 matchall \ > action skbedit mark 65536 continue # tc filter add block 1 protocol ip prio 2 fw # ip link del dev crash0 can still make fw_classify() hit the WARN_ON() in [2]: WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399 Modules linked in: cls_fw(E) act_skbedit(E) CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014 RIP: 0010:fw_classify+0x244/0x250 [cls_fw] Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202 RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004 RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40 RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0 R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000 R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000 FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0 Call Trace: <TASK> tcf_classify+0x17d/0x5c0 tc_run+0x9d/0x150 __dev_queue_xmit+0x2ab/0x14d0 ip_finish_output2+0x340/0x8f0 ip_output+0xa4/0x250 raw_sendmsg+0x147d/0x14b0 __sys_sendto+0x1cc/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x126/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fca40e822ba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003 RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000 </TASK> irq event stamp: 1045778 hardirqs last enabled at (1045784): [<ffffffff864ec042>] __up_console_sem+0x52/0x60 hardirqs last disabled at (1045789): [<ffffffff864ec027>] __up_console_sem+0x37/0x60 softirqs last enabled at (1045426): [<ffffffff874d48c7>] __alloc_skb+0x207/0x260 softirqs last disabled at (1045434): [<ffffffff874fe8f8>] __dev_queue_xmit+0x78/0x14d0 Then, because of the value in the packet's mark, dereference on 'q->handle' with NULL 'q' occurs: BUG: kernel NULL pointer dereference, address: 0000000000000038 [...] RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw] [...] Skip "old-style" classification on shared blocks, so that the NULL dereference is fixed and WARN_ON() is not hit anymore in the short lifetime of invalid cls_fw "old-style" filters. [1] https://sashiko.dev/#/patchset/2 ---truncated--- |
| CVE-2026-53078 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg, the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the destination register in the !fullsock / !locked_tcp_sock path. Both macros borrow a temporary register to check is_fullsock / is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with a request_sock), dst_reg should be zeroed but is not, leaving the stale ctx pointer: - SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer, leading to stack-out-of-bounds access in helpers like bpf_skc_to_tcp6_sock(). - SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the verifier believes is a SCALAR_VALUE, leaking a kernel pointer. Fix both macros by: - Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the added instruction. - Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register restore in the !fullsock path, placed after the restore because dst_reg == src_reg means we need src_reg intact to read ctx->temp. |
| CVE-2026-53070 | In the Linux kernel, the following vulnerability has been resolved: sctp: disable BH before calling udp_tunnel_xmit_skb() udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to tunnel xmit functions"), on the path: udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit() dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU. Without local_bh_disable(), the context may move between CPUs, which can break the inc/dec pairing. This may lead to incorrect recursion level detection and cause packets to be dropped in ip(6)_tunnel_xmit() or __dev_queue_xmit(). Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths. In my testing, after enabling the SCTP over UDP: # ip net exec ha sysctl -w net.sctp.udp_port=9899 # ip net exec ha sysctl -w net.sctp.encap_port=9899 # ip net exec hb sysctl -w net.sctp.udp_port=9899 # ip net exec hb sysctl -w net.sctp.encap_port=9899 # ip net exec ha iperf3 -s - without this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender [ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver - with this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver |
| CVE-2026-53027 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked() When a compressed or sparse attribute has its clusters frame-aligned, vcn is rounded down to the frame start using cmask, which can result in vcn != vcn0. In this case, vcn and vcn0 may reside in different attribute segments. The code already handles the case where vcn is in a different segment by loading its runs before allocation. However, it fails to load runs for vcn0 when vcn0 resides in a different segment than vcn. This causes run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was never loaded into the in-memory run list, triggering the WARN_ON(1). Fix this by adding a missing check for vcn0 after the existing vcn segment check. If vcn0 falls outside the current segment range [svcn, evcn1), find and load the attribute segment containing vcn0 before performing the run lookup. The following scenario triggers the bug: attr_data_get_block_locked() vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment load runs for vcn segment <- vcn0 segment not loaded! attr_allocate_clusters() <- allocation succeeds run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN WARN_ON(1) <- bug fires here! |
| CVE-2026-53005 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Drop all SCM attributes for SOCKMAP. SOCKMAP can hide inflight fd from AF_UNIX GC. When a socket in SOCKMAP receives skb with inflight fd, sk_psock_verdict_data_ready() looks up the mapped socket and enqueue skb to its psock->ingress_skb. Since neither the old nor the new GC can inspect the psock queue, the hidden skb leaks the inflight sockets. Note that this cannot be detected via kmemleak because inflight sockets are linked to a global list. In addition, SOCKMAP redirect breaks the Tarjan-based GC's assumption that unix_edge.successor is always alive, which is no longer true once skb is redirected, resulting in use-after-free below. [0] Moreover, SOCKMAP does not call scm_stat_del() properly, so unix_show_fdinfo() could report an incorrect fd count. sk_msg_recvmsg() does not support any SCM attributes in the first place. Let's drop all SCM attributes before passing skb to the SOCKMAP layer. [0]: BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) Read of size 8 at addr ffff888125362670 by task kworker/56:1/496 CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events sk_psock_backlog Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379) kasan_report (mm/kasan/report.c:597) unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) unix_destroy_fpl (net/unix/garbage.c:317) unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976) sk_psock_backlog (./include/linux/skbuff.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258) </TASK> Allocated by task 955: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) __kasan_slab_alloc (mm/kasan/common.c:369) kmem_cache_alloc_noprof (mm/slub.c:4539) sk_prot_alloc (net/core/sock.c:2240) sk_alloc (net/core/sock.c:2301) unix_create1 (net/unix/af_unix.c:1099) unix_create (net/unix/af_unix.c:1169) __sock_create (net/socket.c:1606) __sys_socketpair (net/socket.c:1811) __x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860) do_syscall_64 (arch/x86/entry/syscall_64.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 496: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kmem_cache_free (mm/slub.c:6165) __sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384) sk_psock_destroy (./include/net/sock.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258) |
| CVE-2026-52988 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase Publish new hooks in the list into the basechain/flowtable using splice_list_rcu() to ensure netlink dump list traversal via rcu is safe while concurrent ruleset update is going on. |
| CVE-2026-52960 | In the Linux kernel, the following vulnerability has been resolved: ceph: put folios not suitable for writeback The batch holds references to the folios (see `filemap_get_folios`, `folio_batch_release`), so we need to `folio_put` the folios we remove. Tested on v6.18. |
| CVE-2026-52948 | In the Linux kernel, the following vulnerability has been resolved: i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl While fuzzing with Syzkaller, a persistent `schedule_timeout: wrong timeout value` warning was observed, accompanied by SMBus controller state machine corruption. The I2C_TIMEOUT ioctl accepts a user-provided timeout in multiples of 10 ms. The user argument is checked against INT_MAX, but it is subsequently multiplied by 10 before being passed to msecs_to_jiffies(). A malicious user can pass a large value (e.g., 429496729) that passes the `arg > INT_MAX` check but overflows when multiplied by 10. This results in a truncated 32-bit unsigned value that bypasses the internal `(int)m < 0` check in `msecs_to_jiffies()`. The truncated value is then assigned to `client->adapter->timeout` (a signed 32-bit int), which is reinterpreted as a negative number. When passed to wait_for_completion_timeout(), this negative value undergoes sign extension to a 64-bit unsigned long, triggering the `schedule_timeout` warning and causing premature returns. This leaves the SMBus state machine in an unrecoverable state, constituting a local Denial of Service (DoS). Fix this by bounding the user argument to `INT_MAX / 10`. [wsa: move the comment as well] |
| CVE-2026-52947 | In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix refcount saturation and potential UAF in qrtr_port_remove In qrtr_port_remove(), the socket reference count is decremented via __sock_put() before the port is removed from the qrtr_ports XArray and before the RCU grace period elapses. This breaks the fundamental RCU update paradigm. It exposes a race window where a concurrent RCU reader (such as qrtr_reset_ports() or qrtr_port_lookup()) can obtain a pointer to the socket from the XArray, and attempt to call sock_hold() on a socket whose reference count has already dropped to zero. This exact race condition was hit during syzkaller fuzzing, leading to the following refcount saturation warning and a potential Use-After-Free: refcount_t: saturated; leaking memory. WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0 Modules linked in: qrtr(+) bochs drm_shmem_helper ... Call Trace: <TASK> qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr] __qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr] qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr] kernel_bind+0xe4/0x120 net/socket.c:3592 qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr] qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr] do_one_initcall+0xf5/0x5e0 init/main.c:1283 ... </TASK> Fix this by deferring the reference count decrement until after the xa_erase() and the synchronize_rcu() complete. (Note: The v1 of this patch incorrectly replaced __sock_put() with sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove() still hold a reference to the socket, so freeing the socket memory here would lead to a subsequent UAF in the caller. Thus, the __sock_put() is kept, but only repositioned to close the RCU race.) |
| CVE-2026-52945 | In the Linux kernel, the following vulnerability has been resolved: Revert "wireguard: device: enable threaded NAPI" This reverts commit 933466fc50a8e4eb167acbd0d8ec96a078462e9c which is commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e upstream. We have had three independent production user reports in combination with Cilium utilizing WireGuard as encryption underneath that k8s Pod E/W traffic to certain peer nodes fully stalled. The situation appears as follows: - Occurs very rarely but at random times under heavy networking load. - Once the issue triggers the decryption side stops working completely for that WireGuard peer, other peers keep working fine. The stall happens also for newly initiated connections towards that particular WireGuard peer. - Only the decryption side is affected, never the encryption side. - Once it triggers, it never recovers and remains in this state, the CPU/mem on that node looks normal, no leak, busy loop or crash. - bpftrace on the affected system shows that wg_prev_queue_enqueue fails, thus the MAX_QUEUED_PACKETS (1024 skbs!) for the peer's rx_queue is reached. - Also, bpftrace shows that wg_packet_rx_poll for that peer is never called again after reaching this state for that peer. For other peers wg_packet_rx_poll does get called normally. - Commit db9ae3b ("wireguard: device: enable threaded NAPI") switched WireGuard to threaded NAPI by default. The default has not been changed for triggering the issue, neither did CPU hotplugging occur (i.e. 5bd8de2 ("wireguard: queueing: always return valid online CPU in wg_cpumask_choose_online()")). - The issue has been observed with stable kernels of v5.15 as well as v6.1. It was reported to us that v5.10 stable is working fine, and no report on v6.6 stable either (somewhat related discussion in [0] though). - In the WireGuard driver the only material difference between v5.10 stable and v5.15 stable is the switch to threaded NAPI by default. [0] https://lore.kernel.org/netdev/CA+wXwBTT74RErDGAnj98PqS=wvdh8eM1pi4q6tTdExtjnokKqA@mail.gmail.com/ Breakdown of the problem: 1) skbs arriving for decryption are enqueued to the peer->rx_queue in wg_packet_consume_data via wg_queue_enqueue_per_device_and_peer. 2) The latter only moves the skb into the MPSC peer queue if it does not surpass MAX_QUEUED_PACKETS (1024) which is kept track in an atomic counter via wg_prev_queue_enqueue. 3) In case enqueueing was successful, the skb is also queued up in the device queue, round-robin picks a next online CPU, and schedules the decryption worker. 4) The wg_packet_decrypt_worker, once scheduled, picks these up from the queue, decrypts the packets and once done calls into wg_queue_enqueue_per_peer_rx. 5) The latter updates the state to PACKET_STATE_CRYPTED on success and calls napi_schedule on the per peer->napi instance. 6) NAPI then polls via wg_packet_rx_poll. wg_prev_queue_peek checks on the peer->rx_queue. It will wg_prev_queue_dequeue if the queue->peeked skb was not cached yet, or just return the latter otherwise. (wg_prev_queue_drop_peeked later clears the cache.) 7) From an ordering perspective, the peer->rx_queue has skbs in order while the device queue with the per-CPU worker threads from a global ordering PoV can finish the decryption and signal the skb PACKET_STATE_CRYPTED out of order. 8) A situation can be observed that the first packet coming in will be stuck waiting for the decryption worker to be scheduled for a longer time when the system is under pressure. 9) While this is the case, the other CPUs in the meantime finish decryption and call into napi_schedule. 10) Now in wg_packet_rx_poll it picks up the first in-order skb from the peer->rx_queue and sees that its state is still PACKET_STATE_UNCRYPTED. The NAPI poll routine then exits e ---truncated--- |
| CVE-2026-52944 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE FSCTL_SET_SPARSE in fsctl_set_sparse() modifies the file's sparse attribute and saves it through xattr without any permission checks. This exposes two issues: 1) A client on a read-only share can change the sparse attribute on files it opened, even though the share is read-only. Other FSCTL write operations already check test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE), but FSCTL_SET_SPARSE does not. 2) Even on writable shares, clients without FILE_WRITE_DATA or FILE_WRITE_ATTRIBUTES access should not modify the sparse attribute. Similar handle-level checks exist in other functions but are missing here. Add both share-level writable check and per-handle access check. Use goto out on error to avoid leaking file references. |
| CVE-2026-52943 | In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put(). |
| CVE-2026-52942 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_log: validate MAC header was set before dumping it The fallback path of dump_mac_header() guards the MAC header access only with "skb->mac_header != skb->network_header", without checking skb_mac_header_was_set(). When the MAC header is unset, mac_header is 0xffff, so the test passes and skb_mac_header(skb) returns skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads dev->hard_header_len bytes out of bounds into the kernel log. This is reachable via the netdev logger: nf_log_unknown_packet() calls dump_mac_header() unconditionally, and an skb sent through AF_PACKET with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still unset (__dev_queue_xmit(), which would reset it, is bypassed). Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already uses, and replace the open-coded MAC header length test with skb_mac_header_len(). Only skbs with an unset MAC header are affected; valid ones are dumped as before. BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831) Read of size 1 at addr ffff88800ea49d3f by task exploit/148 Call Trace: kasan_report (mm/kasan/report.c:595) dump_mac_header (net/netfilter/nf_log_syslog.c:831) nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963) nf_log_packet (net/netfilter/nf_log.c:260) nft_log_eval (net/netfilter/nft_log.c:60) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307) nf_hook_slow (net/netfilter/core.c:619) nf_hook_direct_egress (net/packet/af_packet.c:257) packet_xmit (net/packet/af_packet.c:280) packet_sendmsg (net/packet/af_packet.c:3114) __sys_sendto (net/socket.c:2265) |
| CVE-2026-52939 | In the Linux kernel, the following vulnerability has been resolved: net/rds: fix NULL deref in rds_ib_send_cqe_handler() on masked atomic completion rds_ib_xmit_atomic() always programs a masked atomic opcode (IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD) for every RDS atomic cmsg. But the completion-side switch in rds_ib_send_unmap_op() only handles the non-masked opcodes, so a masked atomic completion falls through to default and returns rm == NULL while send->s_op is left set. rds_ib_send_cqe_handler() then dereferences the NULL rm via rm->m_final_op, oopsing in softirq context. An unprivileged AF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connection triggers it; on hardware that natively accepts masked atomics (mlx4, mlx5) no extra setup is needed. RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR! Oops: general protection fault [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197] RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282) Call Trace: <IRQ> rds_ib_send_cqe_handler (net/rds/ib_send.c:282) poll_scq (net/rds/ib_cm.c:274) rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294) tasklet_action_common (kernel/softirq.c:943) handle_softirqs (kernel/softirq.c:573) run_ksoftirqd (kernel/softirq.c:479) </IRQ> Kernel panic - not syncing: Fatal exception in interrupt Handle the masked atomic opcodes in the same case as the non-masked ones: they map to the same struct rds_message.atomic union member, so the existing container_of()/rds_ib_send_unmap_atomic() body is correct for them. |
| CVE-2026-52935 | In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: do not reuse an in-progress partial send espintcp keeps a single in-flight transmit in ctx->partial. Before building a new sk_msg, espintcp_sendmsg() first tries to flush that state through espintcp_push_msgs(). For blocking callers, espintcp_push_msgs() may return success even when the previous partial send is still pending. espintcp_sendmsg() would then reinitialize emsg->skmsg and reuse ctx->partial while the old transfer still owns that state. Do not rebuild the send message when ctx->partial is still in progress. If espintcp_push_msgs() returns with emsg->len still set, fail the new send instead of overwriting the live partial state. This is a memory-safety fix: reusing the live partial-send state can leave a stale offset attached to a new sk_msg and lead to an out-of- bounds read in the send path. tcp_sendmsg_locked() already handles waiting for send buffer memory, so the fix here is just to preserve espintcp's one-message-at-a-time transmit state. |
| CVE-2026-52934 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: tvlv: reject oversized TVLV packets batadv_tvlv_container_ogm_append() builds a TVLV packet section from the tvlv.container_list. The total size of this section is computed by batadv_tvlv_container_list_size(), which sums the sizes of all registered containers. The return type and accumulator in batadv_tvlv_container_list_size() were u16. If the accumulated size exceeds U16_MAX, the value wraps around, causing the subsequent allocation in batadv_tvlv_container_ogm_append() to be undersized. The memcpy-style copy that follows would then write beyond the end of the allocated buffer, corrupting kernel memory. Fix this by widening the return type of batadv_tvlv_container_list_size() to size_t. In batadv_tvlv_container_ogm_append(), check the computed length against U16_MAX before proceeding, and bail out as if the allocation had failed when the limit is exceeded. |
| CVE-2026-52930 | In the Linux kernel, the following vulnerability has been resolved: ipc/shm: serialize orphan cleanup with shm_nattch updates shm_destroy_orphaned() walks the shm idr under shm_ids(ns).rwsem, but that does not serialize all fields tested by shm_may_destroy(). In particular, shm_nattch is updated while holding shm_perm.lock, and attach paths can do that without holding the rwsem. Do not decide that an orphaned segment is unused before taking the object lock. Move the shm_may_destroy() check under shm_perm.lock, matching the other destroy paths, and unlock the segment when it no longer qualifies for removal. |
| CVE-2026-52929 | In the Linux kernel, the following vulnerability has been resolved: sctp: stream: fully roll back denied add-stream state When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and then lowers outcnt. That leaves removed stream metadata behind, so a later re-add can reuse a stale ext and hit a null-pointer dereference in the scheduler get path. Fix the rollback by tearing down the removed stream state the same way other stream resizes do. Unschedule the current scheduler state, drop the removed stream ext state with sctp_stream_outq_migrate(), and then reschedule the remaining streams. This keeps scheduler-private RR/FC/PRIO lists consistent while fully rolling back denied outgoing stream additions. |
| CVE-2026-52928 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Reject SIOCATMARK on non-stream sockets SIOCATMARK reports whether the receive queue is at the urgent mark for MSG_OOB. In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets. SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(), so they should not support SIOCATMARK either. Return -EOPNOTSUPP for non-stream sockets before checking the receive queue. |
| CVE-2026-52927 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: fix OOB read in compat_mtw_from_user Luxiao Xu says: The function compat_mtw_from_user() converts ebtables extensions from 32-bit user structures to kernel native structures. However, it lacks proper validation of the user-supplied match_size/target_size. When certain extensions are processed, the kernel-side translation logic may perform memory accesses based on the extension's expected size. If the user provides a size smaller than what the extension requires, it results in an out-of-bounds read as reported by KASAN. This fix introduces a check to ensure match_size is at least as large as the extension's required compatsize. This covers matches, watchers, and targets, while maintaining compatibility with standard targets. AFAIU this is relevant for matches that need to go though match->compat_from_user() call. Those that use plain memcpy with the user-provided size are ok because the caller checks that size vs the start of the next rule entry offset (which itself is checked vs. total size copied from userspace). The ->compat_from_user() callbacks assume they can read compatsize bytes, so they need this extra check. Based on an earlier patch from Luxiao Xu. |
| CVE-2026-52923 | In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted. |
| CVE-2026-52917 | In the Linux kernel, the following vulnerability has been resolved: sctp: diag: reject stale associations in dump_one path The SCTP exact sock_diag lookup can hold a transport reference, block on lock_sock(sk), and then resume after sctp_association_free() has marked the association dead and freed its bind address list. When that happens, inet_assoc_attr_size() and inet_diag_msg_sctpasoc_fill() can still dereference association state that is no longer valid for reporting. In particular, inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a real sctp_sockaddr_entry and trigger an out-of-bounds read from unrelated association memory. Reject the association after taking the socket lock if it has been reaped or detached from the endpoint, and report the lookup as stale. This keeps the exact dump-one path from formatting torn association state. |
| CVE-2026-52913 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: v: stop OGMv2 on disabled interface When a batadv_hard_iface is disabled, its mesh_iface pointer is set to NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via batadv_v_ogm_queue_on_if() for interfaces that have since lost their mesh_iface association. This results in a NULL pointer dereference when batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the now NULL hard_iface->mesh_iface to retrieve the batadv_priv. It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was called. |
| CVE-2026-52910 | In the Linux kernel, the following vulnerability has been resolved: bpf: Free reuseport cBPF prog after RCU grace period. Eulgyu Kim reported the splat below with a repro. [0] The repro sets up a UDP reuseport group with a cBPF prog and replaces it with a new one while another thread is sending a UDP packet to the group. The reuseport prog is freed by sk_reuseport_prog_free(). bpf_prog_put() is called for "e"BPF prog to destruct through multiple stages while cBPF prog is freed immediately by bpf_release_orig_filter() and bpf_prog_free(). If a reuseport prog is detached from the setsockopt() path (reuseport_attach_prog() or reuseport_detach_prog()), sk_reuseport_prog_free() is called without waiting for RCU readers to complete, resulting in various bugs. Let's defer freeing the reuseport cBPF prog after one RCU grace period. Note "e"BPF prog is safe as is unless the fast path starts to touch fields destroyed in bpf_prog_put_deferred() and __bpf_prog_put_noref(). [0]: BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 Read of size 4 at addr ffffc9000051e004 by task slowme/10208 CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495 __udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723 __udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752 __udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6181 [inline] __netif_receive_skb net/core/dev.c:6294 [inline] process_backlog+0xaa4/0x1960 net/core/dev.c:6645 __napi_poll+0xae/0x340 net/core/dev.c:7709 napi_poll net/core/dev.c:7772 [inline] net_rx_action+0x5d7/0xf50 net/core/dev.c:7929 handle_softirqs+0x22b/0x870 kernel/softirq.c:622 do_softirq+0x76/0xd0 kernel/softirq.c:523 </IRQ> <TASK> __local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip_output+0x29f/0x450 net/ipv4/ip_output.c:438 ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508 udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195 udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] __sys_sendto+0x554/0x680 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x415a2d Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003 RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010 R10: 0000000000000000 R11: ---truncated--- |
| CVE-2026-52909 | In the Linux kernel, the following vulnerability has been resolved: ip6_vti: set netns_immutable on the fallback device. john1988 and Noam Rathaus reported that vti6_init_net() does not set the netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0). Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel) correctly set this flag during their fallback device initialization to prevent them from being moved to another network namespace. |
| CVE-2026-52908 | In the Linux kernel, the following vulnerability has been resolved: RDMA: During rereg_mr ensure that REREG_ACCESS is compatible If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be re-evaluated to ensure it is properly pinned as RW. Since the umem is hidden inside each driver's mr struct add a ib_umem_check_rereg() function that each driver has to call before processing IB_MR_REREG_ACCESS. mlx4 has to retain its duplicate ib_access_writable check because it implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items in place sequentially while the MR is live, so it will continue to not support this combination. |
| CVE-2026-47021 | Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 8u491, 8u491-perf, 11.0.31, 17.0.19, 21.0.11, 25.0.3, 26.0.1; Oracle GraalVM for JDK: 17.0.19 and 21.0.11; Oracle GraalVM Enterprise Edition: 21.3.18. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| CVE-2026-47010 | Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: ImageIO). Supported versions that are affected are Oracle Java SE: 8u491, 8u491-perf, 11.0.31, 17.0.19, 21.0.11, 25.0.3, 26.0.1; Oracle GraalVM for JDK: 17.0.19 and 21.0.11; Oracle GraalVM Enterprise Edition: 21.3.18. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| CVE-2026-46968 | Vulnerability in Oracle Java SE (component: JSSE). Supported versions that are affected are Oracle Java SE: 8u491, 8u491-perf, 11.0.31, 17.0.19, 21.0.11, 25.0.3, 26.0.1; Oracle GraalVM for JDK: 17.0.19 and 21.0.11; Oracle GraalVM Enterprise Edition: 21.3.18. Difficult to exploit vulnerability allows unauthenticated attacker with network access via TLS to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Java SE accessible data. Note: This vulnerability can only be exploited by supplying data to APIs in the specified Component without using Untrusted Java Web Start applications or Untrusted Java applets, such as through a web service. CVSS 3.1 Base Score 5.9 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N). |
| CVE-2026-46322 | In the Linux kernel, the following vulnerability has been resolved: tun: free page on build_skb failure in tun_xdp_one() When build_skb() fails in tun_xdp_one(), the function sets ret to -ENOMEM and jumps to the out label, which returns without freeing the page that vhost_net_build_xdp() allocated for the frame. As with the short-frame rejection path, tun_sendmsg() discards the per-buffer error and still returns total_len, so vhost_tx_batch() takes the success path and never frees the page. Each build_skb() failure in a batch leaks one page-frag chunk. Free the page before taking the error path, matching the put_page() the other error exits of tun_xdp_one() already perform. |
| CVE-2026-46321 | In the Linux kernel, the following vulnerability has been resolved: tun: free page on short-frame rejection in tun_xdp_one() tun_xdp_one() returns -EINVAL on a frame shorter than ETH_HLEN without freeing the page that vhost_net_build_xdp() allocated for it. tun_sendmsg() discards that -EINVAL and still returns total_len, so vhost_tx_batch() takes the success path and never frees the page; each short frame in a batch leaks one page-frag chunk. A local process that can open /dev/net/tun and /dev/vhost-net can hit this path: it attaches a tun/tap device as the vhost-net backend and feeds TX descriptors whose length minus the virtio-net header is below ETH_HLEN. Each kick leaks the page-frag chunks for that batch, and a tight submission loop exhausts host memory and triggers an OOM panic. Free the page before returning -EINVAL, matching the XDP-program error path in the same function. |
| CVE-2026-46320 | In the Linux kernel, the following vulnerability has been resolved: tap: free page on error paths in tap_get_user_xdp() tap_get_user_xdp() rejects a frame shorter than ETH_HLEN with -EINVAL, and returns -ENOMEM when build_skb() fails. Both paths jump to the err label without freeing the page that vhost_net_build_xdp() allocated for the frame. tap_sendmsg() discards the per-buffer return value and always returns 0, so vhost_tx_batch() takes the success path and never frees the page; each rejected frame in a batch leaks one page-frag chunk. Free the page on both error paths, before the skb is built. This is the tap counterpart of the same leak in tun_xdp_one(). |
| CVE-2026-46252 | In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix locking in regulator_resolve_supply() error path If late enabling of a supply regulator fails in regulator_resolve_supply(), the code currently triggers a lockdep warning: WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596 ... Call trace: _regulator_put+0x80/0xa0 (P) regulator_resolve_supply+0x7cc/0xbe0 regulator_register_resolve_supply+0x28/0xb8 as the regulator_list_mutex must be held when calling _regulator_put(). To solve this, simply switch to using regulator_put(). While at it, we should also make sure that no concurrent access happens to our rdev while we clear out the supply pointer. Add appropriate locking to ensure that. While the code in question will be removed altogether in a follow-up commit, I believe it is still beneficial to have this corrected before removal for future reference. |
| CVE-2026-46203 | In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: fix unclocked access on unbind Make sure that the controller is runtime resumed before disabling it during driver unbind to avoid an unclocked register access. This issue was flagged by Sashiko when reviewing a controller deregistration fix. |
| CVE-2026-45963 | In the Linux kernel, the following vulnerability has been resolved: ASoC: nau8821: Cancel delayed work on component remove Attempting to unload the driver while a jack detection work is pending would likely crash the kernel when it is eventually scheduled for execution: [ 1984.896308] BUG: unable to handle page fault for address: ffffffffc10c2a20 [...] [ 1984.896388] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ 1984.896396] Workqueue: events nau8821_jdet_work [snd_soc_nau8821] [ 1984.896414] RIP: 0010:__mutex_lock+0x9f/0x11d0 [...] [ 1984.896504] Call Trace: [ 1984.896511] <TASK> [ 1984.896524] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896572] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896596] snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896622] nau8821_jdet_work+0xeb/0x1e0 [snd_soc_nau8821] [ 1984.896636] process_one_work+0x211/0x590 [ 1984.896649] ? srso_return_thunk+0x5/0x5f [ 1984.896670] worker_thread+0x1cd/0x3a0 Cancel unscheduled jdet_work or wait for its execution to finish before the component driver gets removed. |
| CVE-2026-45944 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down context entry When tearing down a context entry, the current implementation zeros the entire 128-bit entry using multiple 64-bit writes. This creates a window where the hardware can fetch a "torn" entry — where some fields are already zeroed while the 'Present' bit is still set — leading to unpredictable behavior or spurious faults. While x86 provides strong write ordering, the compiler may reorder writes to the two 64-bit halves of the context entry. Even without compiler reordering, the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Align with the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the context entry first to signal the transition of ownership from hardware to software. 2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU. 3. Perform the required cache and context-cache invalidation to ensure hardware no longer has cached references to the entry. 4. Fully zero out the entry only after the invalidation is complete. Also, add a dma_wmb() to context_set_present() to ensure the entry is fully initialized before the 'Present' bit becomes visible. |
| CVE-2026-45930 | In the Linux kernel, the following vulnerability has been resolved: net: mctp: ensure our nlmsg responses are initialised Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from DEVCORE Research Team working with Trend Micro Zero Day Initiative report that a RTM_GETNEIGH will return uninitalised data in the pad bytes of the ndmsg data. Ensure we're initialising the netlink data to zero, in the link, addr and neigh response messages. |
| CVE-2026-45901 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: revert commit_mutex usage in reset path It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set' rule run at the same time. Previous patches made it safe to run individual reset handlers concurrently so commit_mutex is no longer required to prevent this. |
| CVE-2026-45897 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_counter: serialize reset with spinlock Add a global static spinlock to serialize counter fetch+reset operations, preventing concurrent dump-and-reset from underrunning values. The lock is taken before fetching the total so that two parallel resets cannot both read the same counter values and then both subtract them. A global lock is used for simplicity since resets are infrequent. If this becomes a bottleneck, it can be replaced with a per-net lock later. |
| CVE-2026-45850 | In the Linux kernel, the following vulnerability has been resolved: ipvs: skip ipv6 extension headers for csum checks Protocol checksum validation fails for IPv6 if there are extension headers before the protocol header. iph->len already contains its offset, so use it to fix the problem. |
| CVE-2026-43474 | In the Linux kernel, the following vulnerability has been resolved: fs: init flags_valid before calling vfs_fileattr_get syzbot reported a uninit-value bug in [1]. Similar to the "*get" context where the kernel's internal file_kattr structure is initialized before calling vfs_fileattr_get(), we should use the same mechanism when using fa. [1] BUG: KMSAN: uninit-value in fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 vfs_fileattr_get fs/file_attr.c:94 [inline] __do_sys_file_getattr fs/file_attr.c:416 [inline] Local variable fa.i created at: __do_sys_file_getattr fs/file_attr.c:380 [inline] __se_sys_file_getattr+0x8c/0xbd0 fs/file_attr.c:372 |
| CVE-2026-43400 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in signal ioctl Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. (cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5) |
| CVE-2026-43398 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in wait ioctl Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. v2: squash in Srini's fix (cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476) |
| CVE-2026-43344 | In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using uncore_pcibus_to_dieid(), which retrieves topology from the UBOX GIDNIDMAP register and works regardless of whether NUMA is enabled in Linux. This requires snbep_pci2phy_map_init() to be added in spr_uncore_pci_init(). Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where NUMA is expected to be enabled. |
| CVE-2026-43331 | In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Disable KCOV instrumentation after load_segments() The load_segments() function changes segment registers, invalidating GS base (which KCOV relies on for per-cpu data). When CONFIG_KCOV is enabled, any subsequent instrumented C code call (e.g. native_gdt_invalidate()) begins crashing the kernel in an endless loop. To reproduce the problem, it's sufficient to do kexec on a KCOV-instrumented kernel: $ kexec -l /boot/otherKernel $ kexec -e The real-world context for this problem is enabling crash dump collection in syzkaller. For this, the tool loads a panic kernel before fuzzing and then calls makedumpfile after the panic. This workflow requires both CONFIG_KEXEC and CONFIG_KCOV to be enabled simultaneously. Adding safeguards directly to the KCOV fast-path (__sanitizer_cov_trace_pc()) is also undesirable as it would introduce an extra performance overhead. Disabling instrumentation for the individual functions would be too fragile, so disable KCOV instrumentation for the entire machine_kexec_64.c and physaddr.c. If coverage-guided fuzzing ever needs these components in the future, other approaches should be considered. The problem is not relevant for 32 bit kernels as CONFIG_KCOV is not supported there. [ bp: Space out comment for better readability. ] |
| CVE-2026-43311 | In the Linux kernel, the following vulnerability has been resolved: soc/tegra: pmc: Fix unsafe generic_handle_irq() call Currently, when resuming from system suspend on Tegra platforms, the following warning is observed: WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666 Call trace: handle_irq_desc+0x20/0x58 (P) tegra186_pmc_wake_syscore_resume+0xe4/0x15c syscore_resume+0x3c/0xb8 suspend_devices_and_enter+0x510/0x540 pm_suspend+0x16c/0x1d8 The warning occurs because generic_handle_irq() is being called from a non-interrupt context which is considered as unsafe. Fix this warning by deferring generic_handle_irq() call to an IRQ work which gets executed in hard IRQ context where generic_handle_irq() can be called safely. When PREEMPT_RT kernels are used, regular IRQ work (initialized with init_irq_work) is deferred to run in per-CPU kthreads in preemptible context rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARD variant so that with PREEMPT_RT kernels, the IRQ work is processed in hardirq context instead of being deferred to a thread which is required for calling generic_handle_irq(). On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD() execute in IRQ context, so this change has no functional impact for standard kernel configurations. [treding@nvidia.com: miscellaneous cleanups] |
| CVE-2026-43306 | In the Linux kernel, the following vulnerability has been resolved: bpf: crypto: Use the correct destructor kfunc type With CONFIG_CFI enabled, the kernel strictly enforces that indirect function calls use a function pointer type that matches the target function. I ran into the following type mismatch when running BPF self-tests: CFI failure at bpf_obj_free_fields+0x190/0x238 (target: bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc) Internal error: Oops - CFI: 00000000f2008228 [#1] SMP ... As bpf_crypto_ctx_release() is also used in BPF programs and using a void pointer as the argument would make the verifier unhappy, add a simple stub function with the correct type and register it as the destructor kfunc instead. |
| CVE-2026-43305 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix mismatched unlock for DMUB HW lock in HWSS fast path [Why] The evaluation for whether we need to use the DMUB HW lock isn't the same as whether we need to unlock which results in a hang when the fast path is used for ASIC without FAMS support. [How] Store a flag that indicates whether we should use the lock and use that same flag to specify whether unlocking is needed. |
| CVE-2026-43303 | In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: clear page->private in free_pages_prepare() Several subsystems (slub, shmem, ttm, etc.) use page->private but don't clear it before freeing pages. When these pages are later allocated as high-order pages and split via split_page(), tail pages retain stale page->private values. This causes a use-after-free in the swap subsystem. The swap code uses page->private to track swap count continuations, assuming freshly allocated pages have page->private == 0. When stale values are present, swap_count_continued() incorrectly assumes the continuation list is valid and iterates over uninitialized page->lru containing LIST_POISON values, causing a crash: KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107] RIP: 0010:__do_sys_swapoff+0x1151/0x1860 Fix this by clearing page->private in free_pages_prepare(), ensuring all freed pages have clean state regardless of previous use. |
| CVE-2026-43292 | In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: prevent RCU stalls in kasan_release_vmalloc_node When CONFIG_PAGE_OWNER is enabled, freeing KASAN shadow pages during vmalloc cleanup triggers expensive stack unwinding that acquires RCU read locks. Processing a large purge_list without rescheduling can cause the task to hold CPU for extended periods (10+ seconds), leading to RCU stalls and potential OOM conditions. The issue manifests in purge_vmap_node() -> kasan_release_vmalloc_node() where iterating through hundreds or thousands of vmap_area entries and freeing their associated shadow pages causes: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P6229/1:b..l ... task:kworker/0:17 state:R running task stack:28840 pid:6229 ... kasan_release_vmalloc_node+0x1ba/0xad0 mm/vmalloc.c:2299 purge_vmap_node+0x1ba/0xad0 mm/vmalloc.c:2299 Each call to kasan_release_vmalloc() can free many pages, and with page_owner tracking, each free triggers save_stack() which performs stack unwinding under RCU read lock. Without yielding, this creates an unbounded RCU critical section. Add periodic cond_resched() calls within the loop to allow: - RCU grace periods to complete - Other tasks to run - Scheduler to preempt when needed The fix uses need_resched() for immediate response under load, with a batch count of 32 as a guaranteed upper bound to prevent worst-case stalls even under light load. |
| CVE-2026-43267 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix potential zero beacon interval in beacon tracking During fuzz testing, it was discovered that bss_conf->beacon_int might be zero, which could result in a division by zero error in subsequent calculations. Set a default value of 100 TU if the interval is zero to ensure stability. |
| CVE-2026-43243 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add signal type check for dcn401 get_phyd32clk_src Trying to access link enc on a dpia link will cause a crash otherwise |
| CVE-2026-43240 | In the Linux kernel, the following vulnerability has been resolved: x86/kexec: add a sanity check on previous kernel's ima kexec buffer When the second-stage kernel is booted via kexec with a limiting command line such as "mem=<size>", the physical range that contains the carried over IMA measurement list may fall outside the truncated RAM leading to a kernel panic. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) – not-present page Other architectures already validate the range with page_is_ram(), as done in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") do a similar check on x86. Without carrying the measurement list across kexec, the attestation would fail. |
| CVE-2026-43228 | In the Linux kernel, the following vulnerability has been resolved: hfs: Replace BUG_ON with error handling for CNID count checks In a06ec283e125 next_id, folder_count, and file_count in the super block info were expanded to 64 bits, and BUG_ONs were added to detect overflow. This triggered an error reported by syzbot: if the MDB is corrupted, the BUG_ON is triggered. This patch replaces this mechanism with proper error handling and resolves the syzbot reported bug. Singed-off-by: Jori Koolstra <jkoolstra@xs4all.nl> |
| CVE-2026-43219 | In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Fix potential unregister of netdev that has not been registered yet If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly. |
| CVE-2026-43216 | In the Linux kernel, the following vulnerability has been resolved: net: Drop the lock in skb_may_tx_timestamp() skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must not be taken in IRQ context, only softirq is okay. A few drivers receive the timestamp via a dedicated interrupt and complete the TX timestamp from that handler. This will lead to a deadlock if the lock is already write-locked on the same CPU. Taking the lock can be avoided. The socket (pointed by the skb) will remain valid until the skb is released. The ->sk_socket and ->file member will be set to NULL once the user closes the socket which may happen before the timestamp arrives. If we happen to observe the pointer while the socket is closing but before the pointer is set to NULL then we may use it because both pointer (and the file's cred member) are RCU freed. Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a matching WRITE_ONCE() where the pointer are cleared. |
| CVE-2026-43195 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate user queue size constraints Add validation to ensure user queue sizes meet hardware requirements: - Size must be a power of two for efficient ring buffer wrapping - Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations This prevents invalid configurations that could lead to GPU faults or unexpected behavior. |
| CVE-2026-43165 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin When calling of_parse_phandle_with_args(), the caller is responsible to call of_node_put() to release the reference of device node. In nct7363_present_pwm_fanin, it does not release the reference, causing a resource leak. |
| CVE-2026-43131 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix null pointer dereference issue If SMU is disabled, during RAS initialization, there will be null pointer dereference issue here. |
| CVE-2026-43116 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ensure safe access to master conntrack Holding reference on the expectation is not sufficient, the master conntrack object can just go away, making exp->master invalid. To access exp->master safely: - Grab the nf_conntrack_expect_lock, this gets serialized with clean_from_lists() which also holds this lock when the master conntrack goes away. - Hold reference on master conntrack via nf_conntrack_find_get(). Not so easy since the master tuple to look up for the master conntrack is not available in the existing problematic paths. This patch goes for extending the nf_conntrack_expect_lock section to address this issue for simplicity, in the cases that are described below this is just slightly extending the lock section. The add expectation command already holds a reference to the master conntrack from ctnetlink_create_expect(). However, the delete expectation command needs to grab the spinlock before looking up for the expectation. Expand the existing spinlock section to address this to cover the expectation lookup. Note that, the nf_ct_expect_iterate_net() calls already grabs the spinlock while iterating over the expectation table, which is correct. The get expectation command needs to grab the spinlock to ensure master conntrack does not go away. This also expands the existing spinlock section to cover the expectation lookup too. I needed to move the netlink skb allocation out of the spinlock to keep it GFP_KERNEL. For the expectation events, the IPEXP_DESTROY event is already delivered under the spinlock, just move the delivery of IPEXP_NEW under the spinlock too because the master conntrack event cache is reached through exp->master. While at it, add lockdep notations to help identify what codepaths need to grab the spinlock. |
| CVE-2026-43045 | In the Linux kernel, the following vulnerability has been resolved: mshv: Fix error handling in mshv_region_pin The current error handling has two issues: First, pin_user_pages_fast() can return a short pin count (less than requested but greater than zero) when it cannot pin all requested pages. This is treated as success, leading to partially pinned regions being used, which causes memory corruption. Second, when an error occurs mid-loop, already pinned pages from the current batch are not properly accounted for before calling mshv_region_invalidate_pages(), causing a page reference leak. Treat short pins as errors and fix partial batch accounting before cleanup. |
| CVE-2026-43021 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails When hci_cmd_sync_queue_once() returns with error, the destroy callback will not be called. Fix leaking references / memory on these failures. |
| CVE-2026-43010 | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable kprobe_multi programs at attach time kprobe.multi programs run in atomic/RCU context and cannot sleep. However, bpf_kprobe_multi_link_attach() did not validate whether the program being attached had the sleepable flag set, allowing sleepable helpers such as bpf_copy_from_user() to be invoked from a non-sleepable context. This causes a "sleeping function called from invalid context" splat: BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 0 Fix this by rejecting sleepable programs early in bpf_kprobe_multi_link_attach(), before any further processing. |
| CVE-2026-31663 | In the Linux kernel, the following vulnerability has been resolved: xfrm: hold dev ref until after transport_finish NF_HOOK After async crypto completes, xfrm_input_resume() calls dev_put() immediately on re-entry before the skb reaches transport_finish. The skb->dev pointer is then used inside NF_HOOK and its okfn, which can race with device teardown. Remove the dev_put from the async resumption entry and instead drop the reference after the NF_HOOK call in transport_finish, using a saved device pointer since NF_HOOK may consume the skb. This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip the okfn. For non-transport exits (decaps, gro, drop) and secondary async return points, release the reference inline when async is set. |
| CVE-2026-31614 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix off-by-8 bounds check in check_wsl_eas() The bounds check uses (u8 *)ea + nlen + 1 + vlen as the end of the EA name and value, but ea_data sits at offset sizeof(struct smb2_file_full_ea_info) = 8 from ea, not at offset 0. The strncmp() later reads ea->ea_data[0..nlen-1] and the value bytes follow at ea_data[nlen+1..nlen+vlen], so the actual end is ea->ea_data + nlen + 1 + vlen. Isn't pointer math fun? The earlier check (u8 *)ea > end - sizeof(*ea) only guarantees the 8-byte header is in bounds, but since the last EA is placed within 8 bytes of the end of the response, the name and value bytes are read past the end of iov. Fix this mess all up by using ea->ea_data as the base for the bounds check. An "untrusted" server can use this to leak up to 8 bytes of kernel heap into the EA name comparison and influence which WSL xattr the data is interpreted as. |
| CVE-2026-31461 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix drm_edid leak in amdgpu_dm [WHAT] When a sink is connected, aconnector->drm_edid was overwritten without freeing the previous allocation, causing a memory leak on resume. [HOW] Free the previous drm_edid before updating it. (cherry picked from commit 52024a94e7111366141cfc5d888b2ef011f879e5) |
| CVE-2026-27456 | util-linux is a random collection of Linux utilities. Prior to version 2.41.4, a TOCTOU (Time-of-Check-Time-of-Use) vulnerability has been identified in the SUID binary /usr/bin/mount from util-linux. The mount binary, when setting up loop devices, validates the source file path with user privileges via fork() + setuid() + realpath(), but subsequently re-canonicalizes and opens it with root privileges (euid=0) without verifying that the path has not been replaced between both operations. Neither O_NOFOLLOW, nor inode comparison, nor post-open fstat() are employed. This allows a local unprivileged user to replace the source file with a symlink pointing to any root-owned file or device during the race window, causing the SUID binary to open and mount it as root. Exploitation requires an /etc/fstab entry with user,loop options whose path points to a directory where the attacker has write permission, and that /usr/bin/mount has the SUID bit set (the default configuration on virtually all Linux distributions). The impact is unauthorized read access to root-protected files and block devices, including backup images, disk volumes, and any file containing a valid filesystem. This issue has been patched in version 2.41.4. |
| CVE-2026-27171 | zlib before 1.3.2 allows CPU consumption via crc32_combine64 and crc32_combine_gen64 because x2nmodp can do right shifts within a loop that has no termination condition. |
| CVE-2026-23346 | In the Linux kernel, the following vulnerability has been resolved: arm64: io: Extract user memory type in ioremap_prot() The only caller of ioremap_prot() outside of the generic ioremap() implementation is generic_access_phys(), which passes a 'pgprot_t' value determined from the user mapping of the target 'pfn' being accessed by the kernel. On arm64, the 'pgprot_t' contains all of the non-address bits from the pte, including the permission controls, and so we end up returning a new user mapping from ioremap_prot() which faults when accessed from the kernel on systems with PAN: | Unable to handle kernel read from unreadable memory at virtual address ffff80008ea89000 | ... | Call trace: | __memcpy_fromio+0x80/0xf8 | generic_access_phys+0x20c/0x2b8 | __access_remote_vm+0x46c/0x5b8 | access_remote_vm+0x18/0x30 | environ_read+0x238/0x3e8 | vfs_read+0xe4/0x2b0 | ksys_read+0xcc/0x178 | __arm64_sys_read+0x4c/0x68 Extract only the memory type from the user 'pgprot_t' in ioremap_prot() and assert that we're being passed a user mapping, to protect us against any changes in future that may require additional handling. To avoid falsely flagging users of ioremap(), provide our own ioremap() macro which simply wraps __ioremap_prot(). |
| CVE-2026-23259 | In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: free potentially allocated iovec on cache put failure If a read/write request goes through io_req_rw_cleanup() and has an allocated iovec attached and fails to put to the rw_cache, then it may end up with an unaccounted iovec pointer. Have io_rw_recycle() return whether it recycled the request or not, and use that to gauge whether to free a potential iovec or not. |
| CVE-2026-23201 | In the Linux kernel, the following vulnerability has been resolved: ceph: fix oops due to invalid pointer for kfree() in parse_longname() This fixes a kernel oops when reading ceph snapshot directories (.snap), for example by simply running `ls /mnt/my_ceph/.snap`. The variable str is guarded by __free(kfree), but advanced by one for skipping the initial '_' in snapshot names. Thus, kfree() is called with an invalid pointer. This patch removes the need for advancing the pointer so kfree() is called with correct memory pointer. Steps to reproduce: 1. Create snapshots on a cephfs volume (I've 63 snaps in my testcase) 2. Add cephfs mount to fstab $ echo "samba-fileserver@.files=/volumes/datapool/stuff/3461082b-ecc9-4e82-8549-3fd2590d3fb6 /mnt/test/stuff ceph acl,noatime,_netdev 0 0" >> /etc/fstab 3. Reboot the system $ systemctl reboot 4. Check if it's really mounted $ mount | grep stuff 5. List snapshots (expected 63 snapshots on my system) $ ls /mnt/test/stuff/.snap Now ls hangs forever and the kernel log shows the oops. |
| CVE-2026-23196 | In the Linux kernel, the following vulnerability has been resolved: HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer Add DMA buffer readiness check before reading DMA buffer to avoid unexpected NULL pointer accessing. |
| CVE-2026-23181 | In the Linux kernel, the following vulnerability has been resolved: btrfs: sync read disk super and set block size When the user performs a btrfs mount, the block device is not set correctly. The user sets the block size of the block device to 0x4000 by executing the BLKBSZSET command. Since the block size change also changes the mapping->flags value, this further affects the result of the mapping_min_folio_order() calculation. Let's analyze the following two scenarios: Scenario 1: Without executing the BLKBSZSET command, the block size is 0x1000, and mapping_min_folio_order() returns 0; Scenario 2: After executing the BLKBSZSET command, the block size is 0x4000, and mapping_min_folio_order() returns 2. do_read_cache_folio() allocates a folio before the BLKBSZSET command is executed. This results in the allocated folio having an order value of 0. Later, after BLKBSZSET is executed, the block size increases to 0x4000, and the mapping_min_folio_order() calculation result becomes 2. This leads to two undesirable consequences: 1. filemap_add_folio() triggers a VM_BUG_ON_FOLIO(folio_order(folio) < mapping_min_folio_order(mapping)) assertion. 2. The syzbot report [1] shows a null pointer dereference in create_empty_buffers() due to a buffer head allocation failure. Synchronization should be established based on the inode between the BLKBSZSET command and read cache page to prevent inconsistencies in block size or mapping flags before and after folio allocation. [1] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:create_empty_buffers+0x4d/0x480 fs/buffer.c:1694 Call Trace: folio_create_buffers+0x109/0x150 fs/buffer.c:1802 block_read_full_folio+0x14c/0x850 fs/buffer.c:2403 filemap_read_folio+0xc8/0x2a0 mm/filemap.c:2496 do_read_cache_folio+0x266/0x5c0 mm/filemap.c:4096 do_read_cache_page mm/filemap.c:4162 [inline] read_cache_page_gfp+0x29/0x120 mm/filemap.c:4195 btrfs_read_disk_super+0x192/0x500 fs/btrfs/volumes.c:1367 |
| CVE-2026-23137 | In the Linux kernel, the following vulnerability has been resolved: of: unittest: Fix memory leak in unittest_data_add() In unittest_data_add(), if of_resolve_phandles() fails, the allocated unittest_data is not freed, leading to a memory leak. Fix this by using scope-based cleanup helper __free(kfree) for automatic resource cleanup. This ensures unittest_data is automatically freed when it goes out of scope in error paths. For the success path, use retain_and_null_ptr() to transfer ownership of the memory to the device tree and prevent double freeing. |
| CVE-2026-13757 | A flaw was found in p11-kit. The RPC message attribute parsing functions p11_rpc_message_get_attribute() and p11_rpc_message_get_attribute_array_value() form a mutually-recursive call chain with no recursion depth limit when processing nested CKA_WRAP_TEMPLATE, CKA_UNWRAP_TEMPLATE, and CKA_DERIVE_TEMPLATE attributes. An unauthenticated attacker with local access to the p11-kit RPC Unix domain socket can send a specially crafted request with deeply nested template attributes, causing stack exhaustion and crashing the p11-kit server process and its dependent services. |
| CVE-2026-6390 | A flaw was found in GNU nano's multi-buffer error message handling. When a user opens multiple files at startup and one triggers an ALERT-level error, a specially crafted filename containing printf format specifiers can be reinterpreted. This format string vulnerability may allow an attacker to achieve stack information disclosure, cause a denial of service (crash), or potentially perform arbitrary memory writes. |
| CVE-2025-71302 | In the Linux kernel, the following vulnerability has been resolved: drm/panthor: fix for dma-fence safe access rules Commit 506aa8b02a8d6 ("dma-fence: Add safe access helpers and document the rules") details the dma-fence safe access rules. The most common culprit is that drm_sched_fence_get_timeline_name may race with group_free_queue. |
| CVE-2025-71300 | In the Linux kernel, the following vulnerability has been resolved: Revert "arm64: zynqmp: Add an OP-TEE node to the device tree" This reverts commit 06d22ed6b6635b17551f386b50bb5aaff9b75fbe. OP-TEE logic in U-Boot automatically injects a reserved-memory node along with optee firmware node to kernel device tree. The injection logic is dependent on that there is no manually defined optee node. Having the node in zynqmp.dtsi effectively breaks OP-TEE's insertion of the reserved-memory node, causing memory access violations during runtime. |
| CVE-2025-71299 | In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: Parse DT for flashes with the rest of the DT parsing The recent refactoring of where runtime PM is enabled done in commit f1eb4e792bb1 ("spi: spi-cadence-quadspi: Enable pm runtime earlier to avoid imbalance") made the fact that when we do a pm_runtime_disable() in the error paths of probe() we can trigger a runtime disable which in turn results in duplicate clock disables. This is particularly likely to happen when there is missing or broken DT description for the flashes attached to the controller. Early on in the probe function we do a pm_runtime_get_noresume() since the probe function leaves the device in a powered up state but in the error path we can't assume that PM is enabled so we also manually disable everything, including clocks. This means that when runtime PM is active both it and the probe function release the same reference to the main clock for the IP, triggering warnings from the clock subsystem: [ 8.693719] clk:75:7 already disabled [ 8.693791] WARNING: CPU: 1 PID: 185 at /usr/src/kernel/drivers/clk/clk.c:1188 clk_core_disable+0xa0/0xb ... [ 8.694261] clk_core_disable+0xa0/0xb4 (P) [ 8.694272] clk_disable+0x38/0x60 [ 8.694283] cqspi_probe+0x7c8/0xc5c [spi_cadence_quadspi] [ 8.694309] platform_probe+0x5c/0xa4 Dealing with this issue properly is complicated by the fact that we don't know if runtime PM is active so can't tell if it will disable the clocks or not. We can, however, sidestep the issue for the flash descriptions by moving their parsing to when we parse the controller properties which also save us doing a bunch of setup which can never be used so let's do that. |
| CVE-2025-71293 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/ras: Move ras data alloc before bad page check In the rare event if eeprom has only invalid address entries, allocation is skipped, this causes following NULL pointer issue [ 547.103445] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 547.118897] #PF: supervisor read access in kernel mode [ 547.130292] #PF: error_code(0x0000) - not-present page [ 547.141689] PGD 124757067 P4D 0 [ 547.148842] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 547.158504] CPU: 49 PID: 8167 Comm: cat Tainted: G OE 6.8.0-38-generic #38-Ubuntu [ 547.177998] Hardware name: Supermicro AS -8126GS-TNMR/H14DSG-OD, BIOS 1.7 09/12/2025 [ 547.195178] RIP: 0010:amdgpu_ras_sysfs_badpages_read+0x2f2/0x5d0 [amdgpu] [ 547.210375] Code: e8 63 78 82 c0 45 31 d2 45 3b 75 08 48 8b 45 a0 73 44 44 89 f1 48 8b 7d 88 48 89 ca 48 c1 e2 05 48 29 ca 49 8b 4d 00 48 01 d1 <48> 83 79 10 00 74 17 49 63 f2 48 8b 49 08 41 83 c2 01 48 8d 34 76 [ 547.252045] RSP: 0018:ffa0000067287ac0 EFLAGS: 00010246 [ 547.263636] RAX: ff11000167c28130 RBX: ff11000127600000 RCX: 0000000000000000 [ 547.279467] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ff11000125b1c800 [ 547.295298] RBP: ffa0000067287b50 R08: 0000000000000000 R09: 0000000000000000 [ 547.311129] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 547.326959] R13: ff11000217b1de00 R14: 0000000000000000 R15: 0000000000000092 [ 547.342790] FS: 0000746e59d14740(0000) GS:ff11017dfda80000(0000) knlGS:0000000000000000 [ 547.360744] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 547.373489] CR2: 0000000000000010 CR3: 000000019585e001 CR4: 0000000000f71ef0 [ 547.389321] PKRU: 55555554 [ 547.395316] Call Trace: [ 547.400737] <TASK> [ 547.405386] ? show_regs+0x6d/0x80 [ 547.412929] ? __die+0x24/0x80 [ 547.419697] ? page_fault_oops+0x99/0x1b0 [ 547.428588] ? do_user_addr_fault+0x2ee/0x6b0 [ 547.438249] ? exc_page_fault+0x83/0x1b0 [ 547.446949] ? asm_exc_page_fault+0x27/0x30 [ 547.456225] ? amdgpu_ras_sysfs_badpages_read+0x2f2/0x5d0 [amdgpu] [ 547.470040] ? mas_wr_modify+0xcd/0x140 [ 547.478548] sysfs_kf_bin_read+0x63/0xb0 [ 547.487248] kernfs_file_read_iter+0xa1/0x190 [ 547.496909] kernfs_fop_read_iter+0x25/0x40 [ 547.506182] vfs_read+0x255/0x390 This also result in space left assigned to negative values. Moving data alloc call before bad page check resolves both the issue. |
| CVE-2025-71290 | In the Linux kernel, the following vulnerability has been resolved: misc: ti_fpc202: fix a potential memory leak in probe function Use for_each_child_of_node_scoped() to simplify the code and ensure the device node reference is automatically released when the loop scope ends. |
| CVE-2025-71223 | In the Linux kernel, the following vulnerability has been resolved: smb/server: fix refcount leak in smb2_open() When ksmbd_vfs_getattr() fails, the reference count of ksmbd_file must be released. |
| CVE-2025-71204 | In the Linux kernel, the following vulnerability has been resolved: smb/server: fix refcount leak in parse_durable_handle_context() When the command is a replay operation and -ENOEXEC is returned, the refcount of ksmbd_file must be released. |
| CVE-2025-71158 | In the Linux kernel, the following vulnerability has been resolved: gpio: mpsse: ensure worker is torn down When an IRQ worker is running, unplugging the device would cause a crash. The sealevel hardware this driver was written for was not hotpluggable, so I never realized it. This change uses a spinlock to protect a list of workers, which it tears down on disconnect. |
| CVE-2025-71115 | In the Linux kernel, the following vulnerability has been resolved: um: init cpu_tasks[] earlier This is currently done in uml_finishsetup(), but e.g. with KCOV enabled we'll crash because some init code can call into e.g. memparse(), which has coverage annotations, and then the checks in check_kcov_mode() crash because current is NULL. Simply initialize the cpu_tasks[] array statically, which fixes the crash. For the later SMP work, it seems to have not really caused any problems yet, but initialize all of the entries anyway. |
| CVE-2025-68768 | In the Linux kernel, the following vulnerability has been resolved: inet: frags: flush pending skbs in fqdir_pre_exit() We have been seeing occasional deadlocks on pernet_ops_rwsem since September in NIPA. The stuck task was usually modprobe (often loading a driver like ipvlan), trying to take the lock as a Writer. lockdep does not track readers for rwsems so the read wasn't obvious from the reports. On closer inspection the Reader holding the lock was conntrack looping forever in nf_conntrack_cleanup_net_list(). Based on past experience with occasional NIPA crashes I looked thru the tests which run before the crash and noticed that the crash follows ip_defrag.sh. An immediate red flag. Scouring thru (de)fragmentation queues reveals skbs sitting around, holding conntrack references. The problem is that since conntrack depends on nf_defrag_ipv6, nf_defrag_ipv6 will load first. Since nf_defrag_ipv6 loads first its netns exit hooks run _after_ conntrack's netns exit hook. Flush all fragment queue SKBs during fqdir_pre_exit() to release conntrack references before conntrack cleanup runs. Also flush the queues in timer expiry handlers when they discover fqdir->dead is set, in case packet sneaks in while we're running the pre_exit flush. The commit under Fixes is not exactly the culprit, but I think previously the timer firing would eventually unblock the spinning conntrack. |
| CVE-2025-68333 | In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix possible deadlock in the deferred_irq_workfn() For PREEMPT_RT=y kernels, the deferred_irq_workfn() is executed in the per-cpu irq_work/* task context and not disable-irq, if the rq returned by container_of() is current CPU's rq, the following scenarios may occur: lock(&rq->__lock); <Interrupt> lock(&rq->__lock); This commit use IRQ_WORK_INIT_HARD() to replace init_irq_work() to initialize rq->scx.deferred_irq_work, make the deferred_irq_workfn() is always invoked in hard-irq context. |
| CVE-2025-68318 | In the Linux kernel, the following vulnerability has been resolved: clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL The AXI crossbar of TH1520 has no proper timeout handling, which means gating AXI clocks can easily lead to bus timeout and thus system hang. Set all AXI clock gates to CLK_IS_CRITICAL. All these clock gates are ungated by default on system reset. In addition, convert all current CLK_IGNORE_UNUSED usage to CLK_IS_CRITICAL to prevent unwanted clock gating. |
| CVE-2025-68317 | In the Linux kernel, the following vulnerability has been resolved: io_uring/zctx: check chained notif contexts Send zc only links ubuf_info for requests coming from the same context. There are some ambiguous syz reports, so let's check the assumption on notification completion. |
| CVE-2025-68309 | In the Linux kernel, the following vulnerability has been resolved: PCI/AER: Fix NULL pointer access by aer_info The kzalloc(GFP_KERNEL) may return NULL, so all accesses to aer_info->xxx will result in kernel panic. Fix it. |
| CVE-2025-68296 | In the Linux kernel, the following vulnerability has been resolved: drm, fbcon, vga_switcheroo: Avoid race condition in fbcon setup Protect vga_switcheroo_client_fb_set() with console lock. Avoids OOB access in fbcon_remap_all(). Without holding the console lock the call races with switching outputs. VGA switcheroo calls fbcon_remap_all() when switching clients. The fbcon function uses struct fb_info.node, which is set by register_framebuffer(). As the fb-helper code currently sets up VGA switcheroo before registering the framebuffer, the value of node is -1 and therefore not a legal value. For example, fbcon uses the value within set_con2fb_map() [1] as an index into an array. Moving vga_switcheroo_client_fb_set() after register_framebuffer() can result in VGA switching that does not switch fbcon correctly. Therefore move vga_switcheroo_client_fb_set() under fbcon_fb_registered(), which already holds the console lock. Fbdev calls fbcon_fb_registered() from within register_framebuffer(). Serializes the helper with VGA switcheroo's call to fbcon_remap_all(). Although vga_switcheroo_client_fb_set() takes an instance of struct fb_info as parameter, it really only needs the contained fbcon state. Moving the call to fbcon initialization is therefore cleaner than before. Only amdgpu, i915, nouveau and radeon support vga_switcheroo. For all other drivers, this change does nothing. |
| CVE-2025-68281 | In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list "struct sdca_control" declares "values" field as integer array. But the memory allocated to it is of char array. This causes crash for sdca_parse_function API. This patch addresses the issue by allocating correct data size. |
| CVE-2025-68196 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Cache streams targeting link when performing LT automation [WHY] Last LT automation update can cause crash by referencing current_state and calling into dc_update_planes_and_stream which may clobber current_state. [HOW] Cache relevant stream pointers and iterate through them instead of relying on the current_state. |
| CVE-2025-68193 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Add devm release action to safely tear down CT When a buffer object (BO) is allocated with the XE_BO_FLAG_GGTT_INVALIDATE flag, the driver initiates TLB invalidation requests via the CTB mechanism while releasing the BO. However a premature release of the CTB BO can lead to system crashes, as observed in: Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:h2g_write+0x2f3/0x7c0 [xe] Call Trace: guc_ct_send_locked+0x8b/0x670 [xe] xe_guc_ct_send_locked+0x19/0x60 [xe] send_tlb_invalidation+0xb4/0x460 [xe] xe_gt_tlb_invalidation_ggtt+0x15e/0x2e0 [xe] ggtt_invalidate_gt_tlb.part.0+0x16/0x90 [xe] ggtt_node_remove+0x110/0x140 [xe] xe_ggtt_node_remove+0x40/0xa0 [xe] xe_ggtt_remove_bo+0x87/0x250 [xe] Introduce a devm-managed release action during xe_guc_ct_init() and xe_guc_ct_init_post_hwconfig() to ensure proper CTB disablement before resource deallocation, preventing the use-after-free scenario. |
| CVE-2025-40362 | In the Linux kernel, the following vulnerability has been resolved: ceph: fix multifs mds auth caps issue The mds auth caps check should also validate the fsname along with the associated caps. Not doing so would result in applying the mds auth caps of one fs on to the other fs in a multifs ceph cluster. The bug causes multiple issues w.r.t user authentication, following is one such example. Steps to Reproduce (on vstart cluster): 1. Create two file systems in a cluster, say 'fsname1' and 'fsname2' 2. Authorize read only permission to the user 'client.usr' on fs 'fsname1' $ceph fs authorize fsname1 client.usr / r 3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2' $ceph fs authorize fsname2 client.usr / rw 4. Update the keyring $ceph auth get client.usr >> ./keyring With above permssions for the user 'client.usr', following is the expectation. a. The 'client.usr' should be able to only read the contents and not allowed to create or delete files on file system 'fsname1'. b. The 'client.usr' should be able to read/write on file system 'fsname2'. But, with this bug, the 'client.usr' is allowed to read/write on file system 'fsname1'. See below. 5. Mount the file system 'fsname1' with the user 'client.usr' $sudo bin/mount.ceph usr@.fsname1=/ /kmnt_fsname1_usr/ 6. Try creating a file on file system 'fsname1' with user 'client.usr'. This should fail but passes with this bug. $touch /kmnt_fsname1_usr/file1 7. Mount the file system 'fsname1' with the user 'client.admin' and create a file. $sudo bin/mount.ceph admin@.fsname1=/ /kmnt_fsname1_admin $echo "data" > /kmnt_fsname1_admin/admin_file1 8. Try removing an existing file on file system 'fsname1' with the user 'client.usr'. This shoudn't succeed but succeeds with the bug. $rm -f /kmnt_fsname1_usr/admin_file1 For more information, please take a look at the corresponding mds/fuse patch and tests added by looking into the tracker mentioned below. v2: Fix a possible null dereference in doutc v3: Don't store fsname from mdsmap, validate against ceph_mount_options's fsname and use it v4: Code refactor, better warning message and fix possible compiler warning [ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ] |
| CVE-2025-40356 | In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix DMA-API usage Use DMA-API dma_map_single() call for getting the DMA address of the transfer buffer instead of hacking with virt_to_phys(). This fixes the following DMA-API debug warning: ------------[ cut here ]------------ DMA-API: rockchip-sfc fe300000.spi: device driver tries to sync DMA memory it has not allocated [device address=0x000000000cf70000] [size=288 bytes] WARNING: kernel/dma/debug.c:1106 at check_sync+0x1d8/0x690, CPU#2: systemd-udevd/151 Modules linked in: ... Hardware name: Hardkernel ODROID-M1 (DT) pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : check_sync+0x1d8/0x690 lr : check_sync+0x1d8/0x690 .. Call trace: check_sync+0x1d8/0x690 (P) debug_dma_sync_single_for_cpu+0x84/0x8c __dma_sync_single_for_cpu+0x88/0x234 rockchip_sfc_exec_mem_op+0x4a0/0x798 [spi_rockchip_sfc] spi_mem_exec_op+0x408/0x498 spi_nor_read_data+0x170/0x184 spi_nor_read_sfdp+0x74/0xe4 spi_nor_parse_sfdp+0x120/0x11f0 spi_nor_sfdp_init_params_deprecated+0x3c/0x8c spi_nor_scan+0x690/0xf88 spi_nor_probe+0xe4/0x304 spi_mem_probe+0x6c/0xa8 spi_probe+0x94/0xd4 really_probe+0xbc/0x298 ... |
| CVE-2025-40336 | In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: fix hmm_pfn_to_map_order() usage Handle the case where the hmm range partially covers a huge page (like 2M), otherwise we can potentially end up doing something nasty like mapping memory which is outside the range, and maybe not even mapped by the mm. Fix is based on the xe userptr code, which in a future patch will directly use gpusvm, so needs alignment here. v2: - Add kernel-doc (Matt B) - s/fls/ilog2/ (Thomas) |
| CVE-2025-40335 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate userq input args This will help on validating the userq input args, and rejecting for the invalid userq request at the IOCTLs first place. |
| CVE-2025-40334 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate userq buffer virtual address and size It needs to validate the userq object virtual address to determine whether it is residented in a valid vm mapping. |
| CVE-2025-40332 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mmap write lock not release If mmap write lock is taken while draining retry fault, mmap write lock is not released because svm_range_restore_pages calls mmap_read_unlock then returns. This causes deadlock and system hangs later because mmap read or write lock cannot be taken. Downgrade mmap write lock to read lock if draining retry fault fix this bug. |
| CVE-2025-40217 | In the Linux kernel, the following vulnerability has been resolved: pidfs: validate extensible ioctls Validate extensible ioctls stricter than we do now. |
| CVE-2025-40210 | In the Linux kernel, the following vulnerability has been resolved: Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND" I've found that pynfs COMP6 now leaves the connection or lease in a strange state, which causes CLOSE9 to hang indefinitely. I've dug into it a little, but I haven't been able to root-cause it yet. However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"). Tianshuo Han also reports a potential vulnerability when decoding an NFSv4 COMPOUND. An attacker can place an arbitrarily large op count in the COMPOUND header, which results in: [ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0 when NFSD attempts to allocate the COMPOUND op array. Let's restore the operation-per-COMPOUND limit, but increased to 200 for now. |
| CVE-2025-40208 | In the Linux kernel, the following vulnerability has been resolved: media: iris: fix module removal if firmware download failed Fix remove if firmware failed to load: qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2 qcom-iris aa00000.video-codec: firmware download failed qcom-iris aa00000.video-codec: core init failed then: $ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind Triggers: genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ video_cc_mvs0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ video_cc_mvs0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ gcc_video_axi0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ------------[ cut here ]------------ gcc_video_axi0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- Skip deinit if initialization never succeeded. |
| CVE-2025-40195 | In the Linux kernel, the following vulnerability has been resolved: mount: handle NULL values in mnt_ns_release() When calling in listmount() mnt_ns_release() may be passed a NULL pointer. Handle that case gracefully. |
| CVE-2025-40168 | In the Linux kernel, the following vulnerability has been resolved: smc: Use __sk_dst_get() and dst_dev_rcu() in smc_clc_prfx_match(). smc_clc_prfx_match() is called from smc_listen_work() and not under RCU nor RTNL. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dst_dev_rcu(). Note that the returned value of smc_clc_prfx_match() is not used in the caller. |
| CVE-2025-40158 | In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU in ip6_output() Use RCU in ip6_output() in order to use dst_dev_rcu() to prevent possible UAF. We can remove rcu_read_lock()/rcu_read_unlock() pairs from ip6_finish_output2(). |
| CVE-2025-40139 | In the Linux kernel, the following vulnerability has been resolved: smc: Use __sk_dst_get() and dst_dev_rcu() in in smc_clc_prfx_set(). smc_clc_prfx_set() is called during connect() and not under RCU nor RTNL. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dev_dst_rcu() under rcu_read_lock() after kernel_getsockname(). Note that the returned value of smc_clc_prfx_set() is not used in the caller. While at it, we change the 1st arg of smc_clc_prfx_set[46]_rcu() not to touch dst there. |
| CVE-2025-40102 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Prevent access to vCPU events before init Another day, another syzkaller bug. KVM erroneously allows userspace to pend vCPU events for a vCPU that hasn't been initialized yet, leading to KVM interpreting a bunch of uninitialized garbage for routing / injecting the exception. In one case the injection code and the hyp disagree on whether the vCPU has a 32bit EL1 and put the vCPU into an illegal mode for AArch64, tripping the BUG() in exception_target_el() during the next injection: kernel BUG at arch/arm64/kvm/inject_fault.c:40! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : exception_target_el+0x88/0x8c lr : pend_serror_exception+0x18/0x13c sp : ffff800082f03a10 x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000 x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000 x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004 x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20 Call trace: exception_target_el+0x88/0x8c (P) kvm_inject_serror_esr+0x40/0x3b4 __kvm_arm_vcpu_set_events+0xf0/0x100 kvm_arch_vcpu_ioctl+0x180/0x9d4 kvm_vcpu_ioctl+0x60c/0x9f4 __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000) Reject the ioctls outright as no sane VMM would call these before KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been thrown away by the eventual reset of the vCPU's state. |
| CVE-2025-40098 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_get_acpi_mute_state() Return value of a function acpi_evaluate_dsm() is dereferenced without checking for NULL, but it is usually checked for this function. acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returns acpi_status other than ACPI_SUCCESS, so add a check to prevent the crach. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2025-40097 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix missing pointer check in hda_component_manager_init function The __component_match_add function may assign the 'matchptr' pointer the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced. The call stack leading to the error looks like this: hda_component_manager_init |-> component_match_add |-> component_match_add_release |-> __component_match_add ( ... ,**matchptr, ... ) |-> *matchptr = ERR_PTR(-ENOMEM); // assign |-> component_master_add_with_match( ... match) |-> component_match_realloc(match, match->num); // dereference Add IS_ERR() check to prevent the crash. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| CVE-2025-40074 | In the Linux kernel, the following vulnerability has been resolved: ipv4: start using dst_dev_rcu() Change icmpv4_xrlim_allow(), ip_defrag() to prevent possible UAF. Change ipmr_prepare_xmit(), ipmr_queue_fwd_xmit(), ip_mr_output(), ipv4_neigh_lookup() to use lockdep enabled dst_dev_rcu(). |
| CVE-2025-40073 | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Do not validate SSPP when it is not ready Current code will validate current plane and previous plane to confirm they can share a SSPP with multi-rect mode. The SSPP is already allocated for previous plane, while current plane is not associated with any SSPP yet. Null pointer is referenced when validating the SSPP of current plane. Skip SSPP validation for current plane. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000888ac3000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 4 UID: 0 PID: 1891 Comm: modetest Tainted: G S 6.15.0-rc2-g3ee3f6e1202e #335 PREEMPT Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: SM8650 EV1 rev1 4slam 2et (DT) pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : dpu_plane_is_multirect_capable+0x68/0x90 lr : dpu_assign_plane_resources+0x288/0x410 sp : ffff800093dcb770 x29: ffff800093dcb770 x28: 0000000000002000 x27: ffff000817c6c000 x26: ffff000806b46368 x25: ffff0008013f6080 x24: ffff00080cbf4800 x23: ffff000810842680 x22: ffff0008013f1080 x21: ffff00080cc86080 x20: ffff000806b463b0 x19: ffff00080cbf5a00 x18: 00000000ffffffff x17: 707a5f657a696c61 x16: 0000000000000003 x15: 0000000000002200 x14: 00000000ffffffff x13: 00aaaaaa00aaaaaa x12: 0000000000000000 x11: ffff000817c6e2b8 x10: 0000000000000000 x9 : ffff80008106a950 x8 : ffff00080cbf48f4 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000438 x3 : 0000000000000438 x2 : ffff800082e245e0 x1 : 0000000000000008 x0 : 0000000000000000 Call trace: dpu_plane_is_multirect_capable+0x68/0x90 (P) dpu_crtc_atomic_check+0x5bc/0x650 drm_atomic_helper_check_planes+0x13c/0x220 drm_atomic_helper_check+0x58/0xb8 msm_atomic_check+0xd8/0xf0 drm_atomic_check_only+0x4a8/0x968 drm_atomic_commit+0x50/0xd8 drm_atomic_helper_update_plane+0x140/0x188 __setplane_atomic+0xfc/0x148 drm_mode_setplane+0x164/0x378 drm_ioctl_kernel+0xc0/0x140 drm_ioctl+0x20c/0x500 __arm64_sys_ioctl+0xbc/0xf8 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x48/0xf8 do_el0_svc+0x28/0x40 el0_svc+0x30/0xd0 el0t_64_sync_handler+0x144/0x168 el0t_64_sync+0x198/0x1a0 Code: b9402021 370fffc1 f9401441 3707ff81 (f94010a1) ---[ end trace 0000000000000000 ]--- Patchwork: https://patchwork.freedesktop.org/patch/669224/ |
| CVE-2025-40064 | In the Linux kernel, the following vulnerability has been resolved: smc: Fix use-after-free in __pnet_find_base_ndev(). syzbot reported use-after-free of net_device in __pnet_find_base_ndev(), which was called during connect(). [0] smc_pnet_find_ism_resource() fetches sk_dst_get(sk)->dev and passes down to pnet_find_base_ndev(), where RTNL is held. Then, UAF happened at __pnet_find_base_ndev() when the dev is first used. This means dev had already been freed before acquiring RTNL in pnet_find_base_ndev(). While dev is going away, dst->dev could be swapped with blackhole_netdev, and the dev's refcnt by dst will be released. We must hold dev's refcnt before calling smc_pnet_find_ism_resource(). Also, smc_pnet_find_roce_resource() has the same problem. Let's use __sk_dst_get() and dst_dev_rcu() in the two functions. [0]: BUG: KASAN: use-after-free in __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926 Read of size 1 at addr ffff888036bac33a by task syz.0.3632/18609 CPU: 1 UID: 0 PID: 18609 Comm: syz.0.3632 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926 pnet_find_base_ndev net/smc/smc_pnet.c:946 [inline] smc_pnet_find_ism_by_pnetid net/smc/smc_pnet.c:1103 [inline] smc_pnet_find_ism_resource+0xef/0x390 net/smc/smc_pnet.c:1154 smc_find_ism_device net/smc/af_smc.c:1030 [inline] smc_find_proposal_devices net/smc/af_smc.c:1115 [inline] __smc_connect+0x372/0x1890 net/smc/af_smc.c:1545 smc_connect+0x877/0xd90 net/smc/af_smc.c:1715 __sys_connect_file net/socket.c:2086 [inline] __sys_connect+0x313/0x440 net/socket.c:2105 __do_sys_connect net/socket.c:2111 [inline] __se_sys_connect net/socket.c:2108 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2108 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f47cbf8eba9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f47ccdb1038 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00007f47cc1d5fa0 RCX: 00007f47cbf8eba9 RDX: 0000000000000010 RSI: 0000200000000280 RDI: 000000000000000b RBP: 00007f47cc011e19 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f47cc1d6038 R14: 00007f47cc1d5fa0 R15: 00007ffc512f8aa8 </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888036bacd00 pfn:0x36bac flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000000 ffffea0001243d08 ffff8880b863fdc0 0000000000000000 raw: ffff888036bacd00 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 2, migratetype Unmovable, gfp_mask 0x446dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOWARN|__GFP_RETRY_MAYFAIL|__GFP_COMP), pid 16741, tgid 16741 (syz-executor), ts 343313197788, free_ts 380670750466 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1851 prep_new_page mm/page_alloc.c:1859 [inline] get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3858 __alloc_frozen_pages_noprof+0x181/0x370 mm/page_alloc.c:5148 alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2416 ___kmalloc_large_node+0x5f/0x1b0 mm/slub.c:4317 __kmalloc_large_node_noprof+0x18/0x90 mm/slub.c:4348 __do_kmalloc_node mm/slub.c:4364 [inline] __kvmalloc_node ---truncated--- |
| CVE-2025-40054 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix UAF issue in f2fs_merge_page_bio() As JY reported in bugzilla [1], Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : [0xffffffe51d249484] f2fs_is_cp_guaranteed+0x70/0x98 lr : [0xffffffe51d24adbc] f2fs_merge_page_bio+0x520/0x6d4 CPU: 3 UID: 0 PID: 6790 Comm: kworker/u16:3 Tainted: P B W OE 6.12.30-android16-5-maybe-dirty-4k #1 5f7701c9cbf727d1eebe77c89bbbeb3371e895e5 Tainted: [P]=PROPRIETARY_MODULE, [B]=BAD_PAGE, [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Workqueue: writeback wb_workfn (flush-254:49) Call trace: f2fs_is_cp_guaranteed+0x70/0x98 f2fs_inplace_write_data+0x174/0x2f4 f2fs_do_write_data_page+0x214/0x81c f2fs_write_single_data_page+0x28c/0x764 f2fs_write_data_pages+0x78c/0xce4 do_writepages+0xe8/0x2fc __writeback_single_inode+0x4c/0x4b4 writeback_sb_inodes+0x314/0x540 __writeback_inodes_wb+0xa4/0xf4 wb_writeback+0x160/0x448 wb_workfn+0x2f0/0x5dc process_scheduled_works+0x1c8/0x458 worker_thread+0x334/0x3f0 kthread+0x118/0x1ac ret_from_fork+0x10/0x20 [1] https://bugzilla.kernel.org/show_bug.cgi?id=220575 The panic was caused by UAF issue w/ below race condition: kworker - writepages - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_inplace_write_data - f2fs_merge_page_bio - add_inu_page : cache page #1 into bio & cache bio in io->bio_list - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_inplace_write_data - f2fs_merge_page_bio - add_inu_page : cache page #2 into bio which is linked in io->bio_list write - f2fs_write_begin : write page #1 - f2fs_folio_wait_writeback - f2fs_submit_merged_ipu_write - f2fs_submit_write_bio : submit bio which inclues page #1 and #2 software IRQ - f2fs_write_end_io - fscrypt_free_bounce_page : freed bounced page which belongs to page #2 - inc_page_count( , WB_DATA_TYPE(data_folio), false) : data_folio points to fio->encrypted_page the bounced page can be freed before accessing it in f2fs_is_cp_guarantee() It can reproduce w/ below testcase: Run below script in shell #1: for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \ -c "pwrite 0 32k" -c "fdatasync" Run below script in shell #2: for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \ -c "pwrite 0 32k" -c "fdatasync" So, in f2fs_merge_page_bio(), let's avoid using fio->encrypted_page after commit page into internal ipu cache. |
| CVE-2025-40014 | In the Linux kernel, the following vulnerability has been resolved: objtool, spi: amd: Fix out-of-bounds stack access in amd_set_spi_freq() If speed_hz < AMD_SPI_MIN_HZ, amd_set_spi_freq() iterates over the entire amd_spi_freq array without breaking out early, causing 'i' to go beyond the array bounds. Fix that by stopping the loop when it gets to the last entry, so the low speed_hz value gets clamped up to AMD_SPI_MIN_HZ. Fixes the following warning with an UBSAN kernel: drivers/spi/spi-amd.o: error: objtool: amd_set_spi_freq() falls through to next function amd_spi_set_opcode() |
| CVE-2025-40012 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix warning in smc_rx_splice() when calling get_page() smc_lo_register_dmb() allocates DMB buffers with kzalloc(), which are later passed to get_page() in smc_rx_splice(). Since kmalloc memory is not page-backed, this triggers WARN_ON_ONCE() in get_page() and prevents holding a refcount on the buffer. This can lead to use-after-free if the memory is released before splice_to_pipe() completes. Use folio_alloc() instead, ensuring DMBs are page-backed and safe for get_page(). WARNING: CPU: 18 PID: 12152 at ./include/linux/mm.h:1330 smc_rx_splice+0xaf8/0xe20 [smc] CPU: 18 UID: 0 PID: 12152 Comm: smcapp Kdump: loaded Not tainted 6.17.0-rc3-11705-g9cf4672ecfee #10 NONE Hardware name: IBM 3931 A01 704 (z/VM 7.4.0) Krnl PSW : 0704e00180000000 000793161032696c (smc_rx_splice+0xafc/0xe20 [smc]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000000 001cee80007d3001 00077400000000f8 0000000000000005 0000000000000001 001cee80007d3006 0007740000001000 001c000000000000 000000009b0c99e0 0000000000001000 001c0000000000f8 001c000000000000 000003ffcc6f7c88 0007740003e98000 0007931600000005 000792969b2ff7b8 Krnl Code: 0007931610326960: af000000 mc 0,0 0007931610326964: a7f4ff43 brc 15,00079316103267ea #0007931610326968: af000000 mc 0,0 >000793161032696c: a7f4ff3f brc 15,00079316103267ea 0007931610326970: e320f1000004 lg %r2,256(%r15) 0007931610326976: c0e53fd1b5f5 brasl %r14,000793168fd5d560 000793161032697c: a7f4fbb5 brc 15,00079316103260e6 0007931610326980: b904002b lgr %r2,%r11 Call Trace: smc_rx_splice+0xafc/0xe20 [smc] smc_rx_splice+0x756/0xe20 [smc]) smc_rx_recvmsg+0xa74/0xe00 [smc] smc_splice_read+0x1ce/0x3b0 [smc] sock_splice_read+0xa2/0xf0 do_splice_read+0x198/0x240 splice_file_to_pipe+0x7e/0x110 do_splice+0x59e/0xde0 __do_splice+0x11a/0x2d0 __s390x_sys_splice+0x140/0x1f0 __do_syscall+0x122/0x280 system_call+0x6e/0x90 Last Breaking-Event-Address: smc_rx_splice+0x960/0xe20 [smc] ---[ end trace 0000000000000000 ]--- |
| CVE-2025-39925 | In the Linux kernel, the following vulnerability has been resolved: can: j1939: implement NETDEV_UNREGISTER notification handler syzbot is reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 problem, for j1939 protocol did not have NETDEV_UNREGISTER notification handler for undoing changes made by j1939_sk_bind(). Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") expects that a call to j1939_priv_put() can be unconditionally delayed until j1939_sk_sock_destruct() is called. But we need to call j1939_priv_put() against an extra ref held by j1939_sk_bind() call (as a part of undoing changes made by j1939_sk_bind()) as soon as NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct() is called via j1939_sk_release()). Otherwise, the extra ref on "struct j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from dropping the usage count to 1; making it impossible for unregister_netdevice() to continue. [mkl: remove space in front of label] |
| CVE-2025-39908 | In the Linux kernel, the following vulnerability has been resolved: net: dev_ioctl: take ops lock in hwtstamp lower paths ndo hwtstamp callbacks are expected to run under the per-device ops lock. Make the lower get/set paths consistent with the rest of ndo invocations. Kernel log: WARNING: CPU: 13 PID: 51364 at ./include/net/netdev_lock.h:70 __netdev_update_features+0x4bd/0xe60 ... RIP: 0010:__netdev_update_features+0x4bd/0xe60 ... Call Trace: <TASK> netdev_update_features+0x1f/0x60 mlx5_hwtstamp_set+0x181/0x290 [mlx5_core] mlx5e_hwtstamp_set+0x19/0x30 [mlx5_core] dev_set_hwtstamp_phylib+0x9f/0x220 dev_set_hwtstamp_phylib+0x9f/0x220 dev_set_hwtstamp+0x13d/0x240 dev_ioctl+0x12f/0x4b0 sock_ioctl+0x171/0x370 __x64_sys_ioctl+0x3f7/0x900 ? __sys_setsockopt+0x69/0xb0 do_syscall_64+0x6f/0x2e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... </TASK> .... ---[ end trace 0000000000000000 ]--- Note that the mlx5_hwtstamp_set and mlx5e_hwtstamp_set functions shown in the trace come from an in progress patch converting the legacy ioctl to ndo_hwtstamp_get/set and are not present in mainline. |
| CVE-2025-39905 | In the Linux kernel, the following vulnerability has been resolved: net: phylink: add lock for serializing concurrent pl->phydev writes with resolver Currently phylink_resolve() protects itself against concurrent phylink_bringup_phy() or phylink_disconnect_phy() calls which modify pl->phydev by relying on pl->state_mutex. The problem is that in phylink_resolve(), pl->state_mutex is in a lock inversion state with pl->phydev->lock. So pl->phydev->lock needs to be acquired prior to pl->state_mutex. But that requires dereferencing pl->phydev in the first place, and without pl->state_mutex, that is racy. Hence the reason for the extra lock. Currently it is redundant, but it will serve a functional purpose once mutex_lock(&phy->lock) will be moved outside of the mutex_lock(&pl->state_mutex) section. Another alternative considered would have been to let phylink_resolve() acquire the rtnl_mutex, which is also held when phylink_bringup_phy() and phylink_disconnect_phy() are called. But since phylink_disconnect_phy() runs under rtnl_lock(), it would deadlock with phylink_resolve() when calling flush_work(&pl->resolve). Additionally, it would have been undesirable because it would have unnecessarily blocked many other call paths as well in the entire kernel, so the smaller-scoped lock was preferred. |
| CVE-2025-39884 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix subvolume deletion lockup caused by inodes xarray race There is a race condition between inode eviction and inode caching that can cause a live struct btrfs_inode to be missing from the root->inodes xarray. Specifically, there is a window during evict() between the inode being unhashed and deleted from the xarray. If btrfs_iget() is called for the same inode in that window, it will be recreated and inserted into the xarray, but then eviction will delete the new entry, leaving nothing in the xarray: Thread 1 Thread 2 --------------------------------------------------------------- evict() remove_inode_hash() btrfs_iget_path() btrfs_iget_locked() btrfs_read_locked_inode() btrfs_add_inode_to_root() destroy_inode() btrfs_destroy_inode() btrfs_del_inode_from_root() __xa_erase In turn, this can cause issues for subvolume deletion. Specifically, if an inode is in this lost state, and all other inodes are evicted, then btrfs_del_inode_from_root() will call btrfs_add_dead_root() prematurely. If the lost inode has a delayed_node attached to it, then when btrfs_clean_one_deleted_snapshot() calls btrfs_kill_all_delayed_nodes(), it will loop forever because the delayed_nodes xarray will never become empty (unless memory pressure forces the inode out). We saw this manifest as soft lockups in production. Fix it by only deleting the xarray entry if it matches the given inode (using __xa_cmpxchg()). |
| CVE-2025-39833 | In the Linux kernel, the following vulnerability has been resolved: mISDN: hfcpci: Fix warning when deleting uninitialized timer With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update. |
| CVE-2025-39771 | In the Linux kernel, the following vulnerability has been resolved: regulator: pca9450: Use devm_register_sys_off_handler With module test, there is error dump: ------------[ cut here ]------------ notifier callback pca9450_i2c_restart_handler already registered WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88, CPU#0: kworker/u16:3/50 Call trace: notifier_chain_register+0x5c/0x88 (P) atomic_notifier_chain_register+0x30/0x58 register_restart_handler+0x1c/0x28 pca9450_i2c_probe+0x418/0x538 i2c_device_probe+0x220/0x3d0 really_probe+0x114/0x410 __driver_probe_device+0xa0/0x150 driver_probe_device+0x40/0x114 __device_attach_driver+0xd4/0x12c So use devm_register_sys_off_handler to let kernel handle the resource free to avoid kernel dump. |
| CVE-2025-39745 | In the Linux kernel, the following vulnerability has been resolved: rcutorture: Fix rcutorture_one_extend_check() splat in RT kernels For built with CONFIG_PREEMPT_RT=y kernels, running rcutorture tests resulted in the following splat: [ 68.797425] rcutorture_one_extend_check during change: Current 0x1 To add 0x1 To remove 0x0 preempt_count() 0x0 [ 68.797533] WARNING: CPU: 2 PID: 512 at kernel/rcu/rcutorture.c:1993 rcutorture_one_extend_check+0x419/0x560 [rcutorture] [ 68.797601] Call Trace: [ 68.797602] <TASK> [ 68.797619] ? lockdep_softirqs_off+0xa5/0x160 [ 68.797631] rcutorture_one_extend+0x18e/0xcc0 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797646] ? local_clock+0x19/0x40 [ 68.797659] rcu_torture_one_read+0xf0/0x280 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797678] ? __pfx_rcu_torture_one_read+0x10/0x10 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797804] ? __pfx_rcu_torture_timer+0x10/0x10 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797815] rcu-torture: rcu_torture_reader task started [ 68.797824] rcu-torture: Creating rcu_torture_reader task [ 68.797824] rcu_torture_reader+0x238/0x580 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797836] ? kvm_sched_clock_read+0x15/0x30 Disable BH does not change the SOFTIRQ corresponding bits in preempt_count() for RT kernels, this commit therefore use softirq_count() to check the if BH is disabled. |
| CVE-2025-38621 | In the Linux kernel, the following vulnerability has been resolved: md: make rdev_addable usable for rcu mode Our testcase trigger panic: BUG: kernel NULL pointer dereference, address: 00000000000000e0 ... Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 85 Comm: kworker/2:1 Not tainted 6.16.0+ #94 PREEMPT(none) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Workqueue: md_misc md_start_sync RIP: 0010:rdev_addable+0x4d/0xf0 ... Call Trace: <TASK> md_start_sync+0x329/0x480 process_one_work+0x226/0x6d0 worker_thread+0x19e/0x340 kthread+0x10f/0x250 ret_from_fork+0x14d/0x180 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: raid10 CR2: 00000000000000e0 ---[ end trace 0000000000000000 ]--- RIP: 0010:rdev_addable+0x4d/0xf0 md_spares_need_change in md_start_sync will call rdev_addable which protected by rcu_read_lock/rcu_read_unlock. This rcu context will help protect rdev won't be released, but rdev->mddev will be set to NULL before we call synchronize_rcu in md_kick_rdev_from_array. Fix this by using READ_ONCE and check does rdev->mddev still alive. |
| CVE-2025-38565 | In the Linux kernel, the following vulnerability has been resolved: perf/core: Exit early on perf_mmap() fail When perf_mmap() fails to allocate a buffer, it still invokes the event_mapped() callback of the related event. On X86 this might increase the perf_rdpmc_allowed reference counter. But nothing undoes this as perf_mmap_close() is never called in this case, which causes another reference count leak. Return early on failure to prevent that. |
| CVE-2025-38563 | In the Linux kernel, the following vulnerability has been resolved: perf/core: Prevent VMA split of buffer mappings The perf mmap code is careful about mmap()'ing the user page with the ringbuffer and additionally the auxiliary buffer, when the event supports it. Once the first mapping is established, subsequent mapping have to use the same offset and the same size in both cases. The reference counting for the ringbuffer and the auxiliary buffer depends on this being correct. Though perf does not prevent that a related mapping is split via mmap(2), munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls, which take reference counts, but then the subsequent perf_mmap_close() calls are not longer fulfilling the offset and size checks. This leads to reference count leaks. As perf already has the requirement for subsequent mappings to match the initial mapping, the obvious consequence is that VMA splits, caused by resizing of a mapping or partial unmapping, have to be prevented. Implement the vm_operations_struct::may_split() callback and return unconditionally -EINVAL. That ensures that the mapping offsets and sizes cannot be changed after the fact. Remapping to a different fixed address with the same size is still possible as it takes the references for the new mapping and drops those of the old mapping. |
| CVE-2025-38440 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race between DIM disable and net_dim() There's a race between disabling DIM and NAPI callbacks using the dim pointer on the RQ or SQ. If NAPI checks the DIM state bit and sees it still set, it assumes `rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after that check, the pointer might already be set to NULL, leading to a NULL pointer dereference in net_dim(). Fix this by calling `synchronize_net()` before freeing the DIM context. This ensures all in-progress NAPI callbacks are finished before the pointer is cleared. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:net_dim+0x23/0x190 ... Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? common_interrupt+0xf/0xa0 ? sysvec_call_function_single+0xb/0x90 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? net_dim+0x23/0x190 ? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core] ? sysvec_apic_timer_interrupt+0xb/0x90 mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core] mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core] ? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core] busy_poll_stop+0xa2/0x200 ? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core] ? mlx5e_trigger_irq+0x130/0x130 [mlx5_core] __napi_busy_loop+0x345/0x3b0 ? sysvec_call_function_single+0xb/0x90 ? asm_sysvec_call_function_single+0x16/0x20 ? sysvec_apic_timer_interrupt+0xb/0x90 ? pcpu_free_area+0x1e4/0x2e0 napi_busy_loop+0x11/0x20 xsk_recvmsg+0x10c/0x130 sock_recvmsg+0x44/0x70 __sys_recvfrom+0xbc/0x130 ? __schedule+0x398/0x890 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... ---[ end trace 0000000000000000 ]--- ... ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- |
| CVE-2025-38340 | In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test KASAN reported out of bounds access - cs_dsp_mock_bin_add_name_or_info(), because the source string length was rounded up to the allocation size. |
| CVE-2025-38330 | In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test (ctl cache) KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets(). The code uses mock_coeff_template.length_bytes (4 bytes) for register value allocations. But later, this length is set to 8 bytes which causes test code failures. As fix, just remove the lenght override, keeping the original value 4 for all operations. |
| CVE-2025-38329 | In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test (wmfw info) KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(), because the source string length was rounded up to the allocation size. |
| CVE-2025-38237 | In the Linux kernel, the following vulnerability has been resolved: media: platform: exynos4-is: Add hardware sync wait to fimc_is_hw_change_mode() In fimc_is_hw_change_mode(), the function changes camera modes without waiting for hardware completion, risking corrupted data or system hangs if subsequent operations proceed before the hardware is ready. Add fimc_is_hw_wait_intmsr0_intmsd0() after mode configuration, ensuring hardware state synchronization and stable interrupt handling. |
| CVE-2025-38206 | In the Linux kernel, the following vulnerability has been resolved: exfat: fix double free in delayed_free The double free could happen in the following path. exfat_create_upcase_table() exfat_create_upcase_table() : return error exfat_free_upcase_table() : free ->vol_utbl exfat_load_default_upcase_table : return error exfat_kill_sb() delayed_free() exfat_free_upcase_table() <--------- double free This patch set ->vol_util as NULL after freeing it. |
| CVE-2025-38205 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid divide by zero by initializing dummy pitch to 1 [Why] If the dummy values in `populate_dummy_dml_surface_cfg()` aren't updated then they can lead to a divide by zero in downstream callers like CalculateVMAndRowBytes() [How] Initialize dummy value to a value to avoid divide by zero. |
| CVE-2025-38204 | In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds read in add_missing_indices stbl is s8 but it must contain offsets into slot which can go from 0 to 127. Added a bound check for that error and return -EIO if the check fails. Also make jfs_readdir return with error if add_missing_indices returns with an error. |
| CVE-2025-38203 | In the Linux kernel, the following vulnerability has been resolved: jfs: Fix null-ptr-deref in jfs_ioc_trim [ Syzkaller Report ] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000087: 0000 [#1 KASAN: null-ptr-deref in range [0x0000000000000438-0x000000000000043f] CPU: 2 UID: 0 PID: 10614 Comm: syz-executor.0 Not tainted 6.13.0-rc6-gfbfd64d25c7a-dirty #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-30ms RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x61/0xb0 ? die_addr+0xb1/0xe0 ? exc_general_protection+0x333/0x510 ? asm_exc_general_protection+0x26/0x30 ? jfs_ioc_trim+0x34b/0x8f0 jfs_ioctl+0x3c8/0x4f0 ? __pfx_jfs_ioctl+0x10/0x10 ? __pfx_jfs_ioctl+0x10/0x10 __se_sys_ioctl+0x269/0x350 ? __pfx___se_sys_ioctl+0x10/0x10 ? do_syscall_64+0xfb/0x210 do_syscall_64+0xee/0x210 ? syscall_exit_to_user_mode+0x1e0/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe51f4903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d RSP: 002b:00007fe5202250c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fe51f5cbf80 RCX: 00007fe51f4903ad RDX: 0000000020000680 RSI: 00000000c0185879 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe520225640 R13: 000000000000000e R14: 00007fe51f44fca0 R15: 00007fe52021d000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Kernel panic - not syncing: Fatal exception [ Analysis ] We believe that we have found a concurrency bug in the `fs/jfs` module that results in a null pointer dereference. There is a closely related issue which has been fixed: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234 ... but, unfortunately, the accepted patch appears to still be susceptible to a null pointer dereference under some interleavings. To trigger the bug, we think that `JFS_SBI(ipbmap->i_sb)->bmap` is set to NULL in `dbFreeBits` and then dereferenced in `jfs_ioc_trim`. This bug manifests quite rarely under normal circumstances, but is triggereable from a syz-program. |
| CVE-2025-38187 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in r535_gsp_rpc_push() The RPC container is released after being passed to r535_gsp_rpc_send(). When sending the initial fragment of a large RPC and passing the caller's RPC container, the container will be freed prematurely. Subsequent attempts to send remaining fragments will therefore result in a use-after-free. Allocate a temporary RPC container for holding the initial fragment of a large RPC when sending. Free the caller's container when all fragments are successfully sent. [ Rebase onto Blackwell changes. - Danilo ] |
| CVE-2025-38168 | In the Linux kernel, the following vulnerability has been resolved: perf: arm-ni: Unregister PMUs on probe failure When a resource allocation fails in one clock domain of an NI device, we need to properly roll back all previously registered perf PMUs in other clock domains of the same device. Otherwise, it can lead to kernel panics. Calling arm_ni_init+0x0/0xff8 [arm_ni] @ 2374 arm-ni ARMHCB70:00: Failed to request PMU region 0x1f3c13000 arm-ni ARMHCB70:00: probe with driver arm-ni failed with error -16 list_add corruption: next->prev should be prev (fffffd01e9698a18), but was 0000000000000000. (next=ffff10001a0decc8). pstate: 6340009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : list_add_valid_or_report+0x7c/0xb8 lr : list_add_valid_or_report+0x7c/0xb8 Call trace: __list_add_valid_or_report+0x7c/0xb8 perf_pmu_register+0x22c/0x3a0 arm_ni_probe+0x554/0x70c [arm_ni] platform_probe+0x70/0xe8 really_probe+0xc6/0x4d8 driver_probe_device+0x48/0x170 __driver_attach+0x8e/0x1c0 bus_for_each_dev+0x64/0xf0 driver_add+0x138/0x260 bus_add_driver+0x68/0x138 __platform_driver_register+0x2c/0x40 arm_ni_init+0x14/0x2a [arm_ni] do_init_module+0x36/0x298 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops - BUG: Fatal exception SMP: stopping secondary CPUs |
| CVE-2025-38092 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: use list_first_entry_or_null for opinfo_get_list() The list_first_entry() macro never returns NULL. If the list is empty then it returns an invalid pointer. Use list_first_entry_or_null() to check if the list is empty. |
| CVE-2025-38070 | In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: Add NULL check in sma1307_setting_loaded() All varibale allocated by kzalloc and devm_kzalloc could be NULL. Multiple pointer checks and their cleanup are added. This issue is found by our static analysis tool |
| CVE-2025-38069 | In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Fix double free that causes kernel to oops Fix a kernel oops found while testing the stm32_pcie Endpoint driver with handling of PERST# deassertion: During EP initialization, pci_epf_test_alloc_space() allocates all BARs, which are further freed if epc_set_bar() fails (for instance, due to no free inbound window). However, when pci_epc_set_bar() fails, the error path: pci_epc_set_bar() -> pci_epf_free_space() does not clear the previous assignment to epf_test->reg[bar]. Then, if the host reboots, the PERST# deassertion restarts the BAR allocation sequence with the same allocation failure (no free inbound window), creating a double free situation since epf_test->reg[bar] was deallocated and is still non-NULL. Thus, make sure that pci_epf_alloc_space() and pci_epf_free_space() invocations are symmetric, and as such, set epf_test->reg[bar] to NULL when memory is freed. [kwilczynski: commit log] |
| CVE-2025-38047 | In the Linux kernel, the following vulnerability has been resolved: x86/fred: Fix system hang during S4 resume with FRED enabled Upon a wakeup from S4, the restore kernel starts and initializes the FRED MSRs as needed from its perspective. It then loads a hibernation image, including the image kernel, and attempts to load image pages directly into their original page frames used before hibernation unless those frames are currently in use. Once all pages are moved to their original locations, it jumps to a "trampoline" page in the image kernel. At this point, the image kernel takes control, but the FRED MSRs still contain values set by the restore kernel, which may differ from those set by the image kernel before hibernation. Therefore, the image kernel must ensure the FRED MSRs have the same values as before hibernation. Since these values depend only on the location of the kernel text and data, they can be recomputed from scratch. |
| CVE-2025-38033 | In the Linux kernel, the following vulnerability has been resolved: x86/Kconfig: make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88 Calling core::fmt::write() from rust code while FineIBT is enabled results in a kernel panic: [ 4614.199779] kernel BUG at arch/x86/kernel/cet.c:132! [ 4614.205343] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 4614.211781] CPU: 2 UID: 0 PID: 6057 Comm: dmabuf_dump Tainted: G U O 6.12.17-android16-0-g6ab38c534a43 #1 9da040f27673ec3945e23b998a0f8bd64c846599 [ 4614.227832] Tainted: [U]=USER, [O]=OOT_MODULE [ 4614.241247] RIP: 0010:do_kernel_cp_fault+0xea/0xf0 ... [ 4614.398144] RIP: 0010:_RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x0/0x20 [ 4614.407792] Code: 48 f7 df 48 0f 48 f9 48 89 f2 89 c6 5d e9 18 fd ff ff 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 41 81 ea 14 61 af 2c 74 03 0f 0b 90 <66> 0f 1f 00 55 48 89 e5 48 89 f2 48 8b 3f be 01 00 00 00 5d e9 e7 [ 4614.428775] RSP: 0018:ffffb95acfa4ba68 EFLAGS: 00010246 [ 4614.434609] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000 [ 4614.442587] RDX: 0000000000000007 RSI: ffffb95acfa4ba70 RDI: ffffb95acfa4bc88 [ 4614.450557] RBP: ffffb95acfa4bae0 R08: ffff0a00ffffff05 R09: 0000000000000070 [ 4614.458527] R10: 0000000000000000 R11: ffffffffab67eaf0 R12: ffffb95acfa4bcc8 [ 4614.466493] R13: ffffffffac5d50f0 R14: 0000000000000000 R15: 0000000000000000 [ 4614.474473] ? __cfi__RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x10/0x10 [ 4614.484118] ? _RNvNtCs3o2tGsuHyou_4core3fmt5write+0x1d2/0x250 This happens because core::fmt::write() calls core::fmt::rt::Argument::fmt(), which currently has CFI disabled: library/core/src/fmt/rt.rs: 171 // FIXME: Transmuting formatter in new and indirectly branching to/calling 172 // it here is an explicit CFI violation. 173 #[allow(inline_no_sanitize)] 174 #[no_sanitize(cfi, kcfi)] 175 #[inline] 176 pub(super) unsafe fn fmt(&self, f: &mut Formatter<'_>) -> Result { This causes a Control Protection exception, because FineIBT has sealed off the original function's endbr64. This makes rust currently incompatible with FineIBT. Add a Kconfig dependency that prevents FineIBT from getting turned on by default if rust is enabled. [ Rust 1.88.0 (scheduled for 2025-06-26) should have this fixed [1], and thus we relaxed the condition with Rust >= 1.88. When `objtool` lands checking for this with e.g. [2], the plan is to ideally run that in upstream Rust's CI to prevent regressions early [3], since we do not control `core`'s source code. Alice tested the Rust PR backported to an older compiler. Peter would like that Rust provides a stable `core` which can be pulled into the kernel: "Relying on that much out of tree code is 'unfortunate'". - Miguel ] [ Reduced splat. - Miguel ] |
| CVE-2025-37877 | In the Linux kernel, the following vulnerability has been resolved: iommu: Clear iommu-dma ops on cleanup If iommu_device_register() encounters an error, it can end up tearing down already-configured groups and default domains, however this currently still leaves devices hooked up to iommu-dma (and even historically the behaviour in this area was at best inconsistent across architectures/drivers...) Although in the case that an IOMMU is present whose driver has failed to probe, users cannot necessarily expect DMA to work anyway, it's still arguable that we should do our best to put things back as if the IOMMU driver was never there at all, and certainly the potential for crashing in iommu-dma itself is undesirable. Make sure we clean up the dev->dma_iommu flag along with everything else. |
| CVE-2025-37855 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Guard Possible Null Pointer Dereference [WHY] In some situations, dc->res_pool may be null. [HOW] Check if pointer is null before dereference. |
| CVE-2025-37833 | In the Linux kernel, the following vulnerability has been resolved: net/niu: Niu requires MSIX ENTRY_DATA fields touch before entry reads Fix niu_try_msix() to not cause a fatal trap on sparc systems. Set PCI_DEV_FLAGS_MSIX_TOUCH_ENTRY_DATA_FIRST on the struct pci_dev to work around a bug in the hardware or firmware. For each vector entry in the msix table, niu chips will cause a fatal trap if any registers in that entry are read before that entries' ENTRY_DATA register is written to. Testing indicates writes to other registers are not sufficient to prevent the fatal trap, however the value does not appear to matter. This only needs to happen once after power up, so simply rebooting into a kernel lacking this fix will NOT cause the trap. NON-RESUMABLE ERROR: Reporting on cpu 64 NON-RESUMABLE ERROR: TPC [0x00000000005f6900] <msix_prepare_msi_desc+0x90/0xa0> NON-RESUMABLE ERROR: RAW [4010000000000016:00000e37f93e32ff:0000000202000080:ffffffffffffffff NON-RESUMABLE ERROR: 0000000800000000:0000000000000000:0000000000000000:0000000000000000] NON-RESUMABLE ERROR: handle [0x4010000000000016] stick [0x00000e37f93e32ff] NON-RESUMABLE ERROR: type [precise nonresumable] NON-RESUMABLE ERROR: attrs [0x02000080] < ASI sp-faulted priv > NON-RESUMABLE ERROR: raddr [0xffffffffffffffff] NON-RESUMABLE ERROR: insn effective address [0x000000c50020000c] NON-RESUMABLE ERROR: size [0x8] NON-RESUMABLE ERROR: asi [0x00] CPU: 64 UID: 0 PID: 745 Comm: kworker/64:1 Not tainted 6.11.5 #63 Workqueue: events work_for_cpu_fn TSTATE: 0000000011001602 TPC: 00000000005f6900 TNPC: 00000000005f6904 Y: 00000000 Not tainted TPC: <msix_prepare_msi_desc+0x90/0xa0> g0: 00000000000002e9 g1: 000000000000000c g2: 000000c50020000c g3: 0000000000000100 g4: ffff8000470307c0 g5: ffff800fec5be000 g6: ffff800047a08000 g7: 0000000000000000 o0: ffff800014feb000 o1: ffff800047a0b620 o2: 0000000000000011 o3: ffff800047a0b620 o4: 0000000000000080 o5: 0000000000000011 sp: ffff800047a0ad51 ret_pc: 00000000005f7128 RPC: <__pci_enable_msix_range+0x3cc/0x460> l0: 000000000000000d l1: 000000000000c01f l2: ffff800014feb0a8 l3: 0000000000000020 l4: 000000000000c000 l5: 0000000000000001 l6: 0000000020000000 l7: ffff800047a0b734 i0: ffff800014feb000 i1: ffff800047a0b730 i2: 0000000000000001 i3: 000000000000000d i4: 0000000000000000 i5: 0000000000000000 i6: ffff800047a0ae81 i7: 00000000101888b0 I7: <niu_try_msix.constprop.0+0xc0/0x130 [niu]> Call Trace: [<00000000101888b0>] niu_try_msix.constprop.0+0xc0/0x130 [niu] [<000000001018f840>] niu_get_invariants+0x183c/0x207c [niu] [<00000000101902fc>] niu_pci_init_one+0x27c/0x2fc [niu] [<00000000005ef3e4>] local_pci_probe+0x28/0x74 [<0000000000469240>] work_for_cpu_fn+0x8/0x1c [<000000000046b008>] process_scheduled_works+0x144/0x210 [<000000000046b518>] worker_thread+0x13c/0x1c0 [<00000000004710e0>] kthread+0xb8/0xc8 [<00000000004060c8>] ret_from_fork+0x1c/0x2c [<0000000000000000>] 0x0 Kernel panic - not syncing: Non-resumable error. |
| CVE-2025-37807 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kmemleak warning for percpu hashmap Vlad Poenaru reported the following kmemleak issue: unreferenced object 0x606fd7c44ac8 (size 32): backtrace (crc 0): pcpu_alloc_noprof+0x730/0xeb0 bpf_map_alloc_percpu+0x69/0xc0 prealloc_init+0x9d/0x1b0 htab_map_alloc+0x363/0x510 map_create+0x215/0x3a0 __sys_bpf+0x16b/0x3e0 __x64_sys_bpf+0x18/0x20 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Further investigation shows the reason is due to not 8-byte aligned store of percpu pointer in htab_elem_set_ptr(): *(void __percpu **)(l->key + key_size) = pptr; Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size is 4, that means pptr is stored in a location which is 4 byte aligned but not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based on 8 byte stride, so it won't detect above pptr, hence reporting the memory leak. In htab_map_alloc(), we already have htab->elem_size = sizeof(struct htab_elem) + round_up(htab->map.key_size, 8); if (percpu) htab->elem_size += sizeof(void *); else htab->elem_size += round_up(htab->map.value_size, 8); So storing pptr with 8-byte alignment won't cause any problem and can fix kmemleak too. The issue can be reproduced with bpf selftest as well: 1. Enable CONFIG_DEBUG_KMEMLEAK config 2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c. The purpose is to keep map available so kmemleak can be detected. 3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported. |
| CVE-2025-23131 | In the Linux kernel, the following vulnerability has been resolved: dlm: prevent NPD when writing a positive value to event_done do_uevent returns the value written to event_done. In case it is a positive value, new_lockspace would undo all the work, and lockspace would not be set. __dlm_new_lockspace, however, would treat that positive value as a success due to commit 8511a2728ab8 ("dlm: fix use count with multiple joins"). Down the line, device_create_lockspace would pass that NULL lockspace to dlm_find_lockspace_local, leading to a NULL pointer dereference. Treating such positive values as successes prevents the problem. Given this has been broken for so long, this is unlikely to break userspace expectations. |
| CVE-2025-22127 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadloop in prepare_compress_overwrite() Jan Prusakowski reported a kernel hang issue as below: When running xfstests on linux-next kernel (6.14.0-rc3, 6.12) I encountered a problem in generic/475 test where fsstress process gets blocked in __f2fs_write_data_pages() and the test hangs. The options I used are: MKFS_OPTIONS -- -O compression -O extra_attr -O project_quota -O quota /dev/vdc MOUNT_OPTIONS -- -o acl,user_xattr -o discard,compress_extension=* /dev/vdc /vdc INFO: task kworker/u8:0:11 blocked for more than 122 seconds. Not tainted 6.14.0-rc3-xfstests-lockdep #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:0 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208160 flags:0x00004000 Workqueue: writeback wb_workfn (flush-253:0) Call Trace: <TASK> __schedule+0x309/0x8e0 schedule+0x3a/0x100 schedule_preempt_disabled+0x15/0x30 __mutex_lock+0x59a/0xdb0 __f2fs_write_data_pages+0x3ac/0x400 do_writepages+0xe8/0x290 __writeback_single_inode+0x5c/0x360 writeback_sb_inodes+0x22f/0x570 wb_writeback+0xb0/0x410 wb_do_writeback+0x47/0x2f0 wb_workfn+0x5a/0x1c0 process_one_work+0x223/0x5b0 worker_thread+0x1d5/0x3c0 kthread+0xfd/0x230 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> The root cause is: once generic/475 starts toload error table to dm device, f2fs_prepare_compress_overwrite() will loop reading compressed cluster pages due to IO error, meanwhile it has held .writepages lock, it can block all other writeback tasks. Let's fix this issue w/ below changes: - add f2fs_handle_page_eio() in prepare_compress_overwrite() to detect IO error. - detect cp_error earler in f2fs_read_multi_pages(). |
| CVE-2025-22108 | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Mask the bd_cnt field in the TX BD properly The bd_cnt field in the TX BD specifies the total number of BDs for the TX packet. The bd_cnt field has 5 bits and the maximum number supported is 32 with the value 0. CONFIG_MAX_SKB_FRAGS can be modified and the total number of SKB fragments can approach or exceed the maximum supported by the chip. Add a macro to properly mask the bd_cnt field so that the value 32 will be properly masked and set to 0 in the bd_cnd field. Without this patch, the out-of-range bd_cnt value will corrupt the TX BD and may cause TX timeout. The next patch will check for values exceeding 32. |
| CVE-2025-22104 | In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Use kernel helpers for hex dumps Previously, when the driver was printing hex dumps, the buffer was cast to an 8 byte long and printed using string formatters. If the buffer size was not a multiple of 8 then a read buffer overflow was possible. Therefore, create a new ibmvnic function that loops over a buffer and calls hex_dump_to_buffer instead. This patch address KASAN reports like the one below: ibmvnic 30000003 env3: Login Buffer: ibmvnic 30000003 env3: 01000000af000000 <...> ibmvnic 30000003 env3: 2e6d62692e736261 ibmvnic 30000003 env3: 65050003006d6f63 ================================================================== BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic] Read of size 8 at addr c0000001331a9aa8 by task ip/17681 <...> Allocated by task 17681: <...> ibmvnic_login+0x2f0/0xffc [ibmvnic] ibmvnic_open+0x148/0x308 [ibmvnic] __dev_open+0x1ac/0x304 <...> The buggy address is located 168 bytes inside of allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf) <...> ================================================================= ibmvnic 30000003 env3: 000000000033766e |
| CVE-2025-22077 | In the Linux kernel, the following vulnerability has been resolved: Revert "smb: client: fix TCP timers deadlock after rmmod" This reverts commit e9f2517a3e18a54a3943c098d2226b245d488801. Commit e9f2517a3e18 ("smb: client: fix TCP timers deadlock after rmmod") is intended to fix a null-ptr-deref in LOCKDEP, which is mentioned as CVE-2024-54680, but is actually did not fix anything; The issue can be reproduced on top of it. [0] Also, it reverted the change by commit ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.") and introduced a real issue by reviving the kernel TCP socket. When a reconnect happens for a CIFS connection, the socket state transitions to FIN_WAIT_1. Then, inet_csk_clear_xmit_timers_sync() in tcp_close() stops all timers for the socket. If an incoming FIN packet is lost, the socket will stay at FIN_WAIT_1 forever, and such sockets could be leaked up to net.ipv4.tcp_max_orphans. Usually, FIN can be retransmitted by the peer, but if the peer aborts the connection, the issue comes into reality. I warned about this privately by pointing out the exact report [1], but the bogus fix was finally merged. So, we should not stop the timers to finally kill the connection on our side in that case, meaning we must not use a kernel socket for TCP whose sk->sk_net_refcnt is 0. The kernel socket does not have a reference to its netns to make it possible to tear down netns without cleaning up every resource in it. For example, tunnel devices use a UDP socket internally, but we can destroy netns without removing such devices and let it complete during exit. Otherwise, netns would be leaked when the last application died. However, this is problematic for TCP sockets because TCP has timers to close the connection gracefully even after the socket is close()d. The lifetime of the socket and its netns is different from the lifetime of the underlying connection. If the socket user does not maintain the netns lifetime, the timer could be fired after the socket is close()d and its netns is freed up, resulting in use-after-free. Actually, we have seen so many similar issues and converted such sockets to have a reference to netns. That's why I converted the CIFS client socket to have a reference to netns (sk->sk_net_refcnt == 1), which is somehow mentioned as out-of-scope of CIFS and technically wrong in e9f2517a3e18, but **is in-scope and right fix**. Regarding the LOCKDEP issue, we can prevent the module unload by bumping the module refcount when switching the LOCKDDEP key in sock_lock_init_class_and_name(). [2] For a while, let's revert the bogus fix. Note that now we can use sk_net_refcnt_upgrade() for the socket conversion, but I'll do so later separately to make backport easy. |
| CVE-2025-21985 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bound accesses [WHAT & HOW] hpo_stream_to_link_encoder_mapping has size MAX_HPO_DP2_ENCODERS(=4), but location can have size up to 6. As a result, it is necessary to check location against MAX_HPO_DP2_ENCODERS. Similiarly, disp_cfg_stream_location can be used as an array index which should be 0..5, so the ASSERT's conditions should be less without equal. |
| CVE-2025-21819 | In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd/display: Use HW lock mgr for PSR1" This reverts commit a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1") Because it may cause system hang while connect with two edp panel. |
| CVE-2025-21817 | In the Linux kernel, the following vulnerability has been resolved: block: mark GFP_NOIO around sysfs ->store() sysfs ->store is called with queue freezed, meantime we have several ->store() callbacks(update_nr_requests, wbt, scheduler) to allocate memory with GFP_KERNEL which may run into direct reclaim code path, then potential deadlock can be caused. Fix the issue by marking NOIO around sysfs ->store() |
| CVE-2025-21730 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid to init mgnt_entry list twice when WoWLAN failed If WoWLAN failed in resume flow, the rtw89_ops_add_interface() triggered without removing the interface first. Then the mgnt_entry list init again, causing the list_empty() check in rtw89_chanctx_ops_assign_vif() useless, and list_add_tail() again. Therefore, we have added a check to prevent double adding of the list. rtw89_8852ce 0000:01:00.0: failed to check wow status disabled rtw89_8852ce 0000:01:00.0: wow: failed to check disable fw ready rtw89_8852ce 0000:01:00.0: wow: failed to swap to normal fw rtw89_8852ce 0000:01:00.0: failed to disable wow rtw89_8852ce 0000:01:00.0: failed to resume for wow -110 rtw89_8852ce 0000:01:00.0: MAC has already powered on i2c_hid_acpi i2c-ILTK0001:00: PM: acpi_subsys_resume+0x0/0x60 returned 0 after 284705 usecs list_add corruption. prev->next should be next (ffff9d9719d82228), but was ffff9d9719f96030. (prev=ffff9d9719f96030). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:34! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 6918 Comm: kworker/u8:19 Tainted: G U O Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.514.0 03/25/2024 Workqueue: events_unbound async_run_entry_fn RIP: 0010:__list_add_valid_or_report+0x9f/0xb0 Code: e8 56 89 ff ff 0f 0b 48 c7 c7 3e fc e0 96 48 89 c6 e8 45 89 ff ... RSP: 0018:ffffa51b42bbbaf0 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff9d9719d82ab0 RCX: 13acb86e047a4400 RDX: 3fffffffffffffff RSI: 0000000000000000 RDI: 00000000ffffdfff RBP: ffffa51b42bbbb28 R08: ffffffff9768e250 R09: 0000000000001fff R10: ffffffff9765e250 R11: 0000000000005ffd R12: ffff9d9719f95c40 R13: ffff9d9719f95be8 R14: ffff9d97081bfd78 R15: ffff9d9719d82060 FS: 0000000000000000(0000) GS:ffff9d9a6fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007e7d029a4060 CR3: 0000000345e38000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? die+0xaa/0xd0 ? do_trap+0x9f/0x170 ? __list_add_valid_or_report+0x9f/0xb0 ? __list_add_valid_or_report+0x9f/0xb0 ? handle_invalid_op+0x69/0x90 ? __list_add_valid_or_report+0x9f/0xb0 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? __list_add_valid_or_report+0x9f/0xb0 rtw89_chanctx_ops_assign_vif+0x1f9/0x210 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1] ? __mutex_unlock_slowpath+0xa0/0xf0 rtw89_ops_assign_vif_chanctx+0x4b/0x90 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1] drv_assign_vif_chanctx+0xa7/0x1f0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6] ieee80211_reconfig+0x9cb/0x17b0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] ? dev_printk_emit+0x51/0x70 ? _dev_info+0x6e/0x90 wiphy_resume+0x89/0x180 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] dpm_run_callback+0x37/0x1e0 device_resume+0x26d/0x4b0 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x29/0xd0 worker_thread+0x397/0x970 kthread+0xed/0x110 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> |
| CVE-2025-21687 | In the Linux kernel, the following vulnerability has been resolved: vfio/platform: check the bounds of read/write syscalls count and offset are passed from user space and not checked, only offset is capped to 40 bits, which can be used to read/write out of bounds of the device. |
| CVE-2024-58095 | In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before txBeginAnon() call Added a read-only check before calling `txBeginAnon` in `extAlloc` and `extRecord`. This prevents modification attempts on a read-only mounted filesystem, avoiding potential errors or crashes. Call trace: txBeginAnon+0xac/0x154 extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78 jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248 __block_write_begin_int+0x580/0x166c fs/buffer.c:2128 __block_write_begin fs/buffer.c:2177 [inline] block_write_begin+0x98/0x11c fs/buffer.c:2236 jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299 |
| CVE-2024-58094 | In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before truncation in jfs_truncate_nolock() Added a check for "read-only" mode in the `jfs_truncate_nolock` function to avoid errors related to writing to a read-only filesystem. Call stack: block_write_begin() { jfs_write_failed() { jfs_truncate() { jfs_truncate_nolock() { txEnd() { ... log = JFS_SBI(tblk->sb)->log; // (log == NULL) If the `isReadOnly(ip)` condition is triggered in `jfs_truncate_nolock`, the function execution will stop, and no further data modification will occur. Instead, the `xtTruncate` function will be called with the "COMMIT_WMAP" flag, preventing modifications in "read-only" mode. |
| CVE-2024-57950 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize denominator defaults to 1 [WHAT & HOW] Variables, used as denominators and maybe not assigned to other values, should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported by Coverity. (cherry picked from commit e2c4c6c10542ccfe4a0830bb6c9fd5b177b7bbb7) |
| CVE-2024-57875 | In the Linux kernel, the following vulnerability has been resolved: block: RCU protect disk->conv_zones_bitmap Ensure that a disk revalidation changing the conventional zones bitmap of a disk does not cause invalid memory references when using the disk_zone_is_conv() helper by RCU protecting the disk->conv_zones_bitmap pointer. disk_zone_is_conv() is modified to operate under the RCU read lock and the function disk_set_conv_zones_bitmap() is added to update a disk conv_zones_bitmap pointer using rcu_replace_pointer() with the disk zone_wplugs_lock spinlock held. disk_free_zone_resources() is modified to call disk_update_zone_resources() with a NULL bitmap pointer to free the disk conv_zones_bitmap. disk_set_conv_zones_bitmap() is also used in disk_update_zone_resources() to set the new (revalidated) bitmap and free the old one. |
| CVE-2024-57852 | In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: smc: Handle missing SCM device Commit ca61d6836e6f ("firmware: qcom: scm: fix a NULL-pointer dereference") makes it explicit that qcom_scm_get_tzmem_pool() can return NULL, therefore its users should handle this. |
| CVE-2024-56788 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: oa_tc6: fix tx skb race condition between reference pointers There are two skb pointers to manage tx skb's enqueued from n/w stack. waiting_tx_skb pointer points to the tx skb which needs to be processed and ongoing_tx_skb pointer points to the tx skb which is being processed. SPI thread prepares the tx data chunks from the tx skb pointed by the ongoing_tx_skb pointer. When the tx skb pointed by the ongoing_tx_skb is processed, the tx skb pointed by the waiting_tx_skb is assigned to ongoing_tx_skb and the waiting_tx_skb pointer is assigned with NULL. Whenever there is a new tx skb from n/w stack, it will be assigned to waiting_tx_skb pointer if it is NULL. Enqueuing and processing of a tx skb handled in two different threads. Consider a scenario where the SPI thread processed an ongoing_tx_skb and it moves next tx skb from waiting_tx_skb pointer to ongoing_tx_skb pointer without doing any NULL check. At this time, if the waiting_tx_skb pointer is NULL then ongoing_tx_skb pointer is also assigned with NULL. After that, if a new tx skb is assigned to waiting_tx_skb pointer by the n/w stack and there is a chance to overwrite the tx skb pointer with NULL in the SPI thread. Finally one of the tx skb will be left as unhandled, resulting packet missing and memory leak. - Consider the below scenario where the TXC reported from the previous transfer is 10 and ongoing_tx_skb holds an tx ethernet frame which can be transported in 20 TXCs and waiting_tx_skb is still NULL. tx_credits = 10; /* 21 are filled in the previous transfer */ ongoing_tx_skb = 20; waiting_tx_skb = NULL; /* Still NULL */ - So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true. - After oa_tc6_prepare_spi_tx_buf_for_tx_skbs() ongoing_tx_skb = 10; waiting_tx_skb = NULL; /* Still NULL */ - Perform SPI transfer. - Process SPI rx buffer to get the TXC from footers. - Now let's assume previously filled 21 TXCs are freed so we are good to transport the next remaining 10 tx chunks from ongoing_tx_skb. tx_credits = 21; ongoing_tx_skb = 10; waiting_tx_skb = NULL; - So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true again. - In the oa_tc6_prepare_spi_tx_buf_for_tx_skbs() ongoing_tx_skb = NULL; waiting_tx_skb = NULL; - Now the below bad case might happen, Thread1 (oa_tc6_start_xmit) Thread2 (oa_tc6_spi_thread_handler) --------------------------- ----------------------------------- - if waiting_tx_skb is NULL - if ongoing_tx_skb is NULL - ongoing_tx_skb = waiting_tx_skb - waiting_tx_skb = skb - waiting_tx_skb = NULL ... - ongoing_tx_skb = NULL - if waiting_tx_skb is NULL - waiting_tx_skb = skb To overcome the above issue, protect the moving of tx skb reference from waiting_tx_skb pointer to ongoing_tx_skb pointer and assigning new tx skb to waiting_tx_skb pointer, so that the other thread can't access the waiting_tx_skb pointer until the current thread completes moving the tx skb reference safely. |
| CVE-2024-56671 | In the Linux kernel, the following vulnerability has been resolved: gpio: graniterapids: Fix vGPIO driver crash Move setting irq_chip.name from probe() function to the initialization of "irq_chip" struct in order to fix vGPIO driver crash during bootup. Crash was caused by unauthorized modification of irq_chip.name field where irq_chip struct was initialized as const. This behavior is a consequence of suboptimal implementation of gpio_irq_chip_set_chip(), which should be changed to avoid casting away const qualifier. Crash log: BUG: unable to handle page fault for address: ffffffffc0ba81c0 /#PF: supervisor write access in kernel mode /#PF: error_code(0x0003) - permissions violation CPU: 33 UID: 0 PID: 1075 Comm: systemd-udevd Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 #1 Hardware name: Intel Corporation Kaseyville RP/Kaseyville RP, BIOS KVLDCRB1.PGS.0026.D73.2410081258 10/08/2024 RIP: 0010:gnr_gpio_probe+0x171/0x220 [gpio_graniterapids] |
| CVE-2024-56639 | In the Linux kernel, the following vulnerability has been resolved: net: hsr: must allocate more bytes for RedBox support Blamed commit forgot to change hsr_init_skb() to allocate larger skb for RedBox case. Indeed, send_hsr_supervision_frame() will add two additional components (struct hsr_sup_tlv and struct hsr_sup_payload) syzbot reported the following crash: skbuff: skb_over_panic: text:ffffffff8afd4b0a len:34 put:6 head:ffff88802ad29e00 data:ffff88802ad29f22 tail:0x144 end:0x140 dev:gretap0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 2 UID: 0 PID: 7611 Comm: syz-executor Not tainted 6.12.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:skb_panic+0x157/0x1d0 net/core/skbuff.c:206 Code: b6 04 01 84 c0 74 04 3c 03 7e 21 8b 4b 70 41 56 45 89 e8 48 c7 c7 a0 7d 9b 8c 41 57 56 48 89 ee 52 4c 89 e2 e8 9a 76 79 f8 90 <0f> 0b 4c 89 4c 24 10 48 89 54 24 08 48 89 34 24 e8 94 76 fb f8 4c RSP: 0018:ffffc90000858ab8 EFLAGS: 00010282 RAX: 0000000000000087 RBX: ffff8880598c08c0 RCX: ffffffff816d3e69 RDX: 0000000000000000 RSI: ffffffff816de786 RDI: 0000000000000005 RBP: ffffffff8c9b91c0 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000302 R11: ffffffff961cc1d0 R12: ffffffff8afd4b0a R13: 0000000000000006 R14: ffff88804b938130 R15: 0000000000000140 FS: 000055558a3d6500(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1295974ff8 CR3: 000000002ab6e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> skb_over_panic net/core/skbuff.c:211 [inline] skb_put+0x174/0x1b0 net/core/skbuff.c:2617 send_hsr_supervision_frame+0x6fa/0x9e0 net/hsr/hsr_device.c:342 hsr_proxy_announce+0x1a3/0x4a0 net/hsr/hsr_device.c:436 call_timer_fn+0x1a0/0x610 kernel/time/timer.c:1794 expire_timers kernel/time/timer.c:1845 [inline] __run_timers+0x6e8/0x930 kernel/time/timer.c:2419 __run_timer_base kernel/time/timer.c:2430 [inline] __run_timer_base kernel/time/timer.c:2423 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2439 run_timer_softirq+0x1a/0x40 kernel/time/timer.c:2449 handle_softirqs+0x213/0x8f0 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu kernel/softirq.c:637 [inline] irq_exit_rcu+0xbb/0x120 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049 </IRQ> |
| CVE-2024-56552 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc_submit: fix race around suspend_pending Currently in some testcases we can trigger: xe 0000:03:00.0: [drm] Assertion `exec_queue_destroyed(q)` failed! .... WARNING: CPU: 18 PID: 2640 at drivers/gpu/drm/xe/xe_guc_submit.c:1826 xe_guc_sched_done_handler+0xa54/0xef0 [xe] xe 0000:03:00.0: [drm] *ERROR* GT1: DEREGISTER_DONE: Unexpected engine state 0x00a1, guc_id=57 Looking at a snippet of corresponding ftrace for this GuC id we can see: 162.673311: xe_sched_msg_add: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3 162.673317: xe_sched_msg_recv: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3 162.673319: xe_exec_queue_scheduling_disable: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0 162.674089: xe_exec_queue_kill: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0 162.674108: xe_exec_queue_close: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0 162.674488: xe_exec_queue_scheduling_done: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0 162.678452: xe_exec_queue_deregister: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa1, flags=0x0 It looks like we try to suspend the queue (opcode=3), setting suspend_pending and triggering a disable_scheduling. The user then closes the queue. However the close will also forcefully signal the suspend fence after killing the queue, later when the G2H response for disable_scheduling comes back we have now cleared suspend_pending when signalling the suspend fence, so the disable_scheduling now incorrectly tries to also deregister the queue. This leads to warnings since the queue has yet to even be marked for destruction. We also seem to trigger errors later with trying to double unregister the same queue. To fix this tweak the ordering when handling the response to ensure we don't race with a disable_scheduling that didn't actually intend to perform an unregister. The destruction path should now also correctly wait for any pending_disable before marking as destroyed. (cherry picked from commit f161809b362f027b6d72bd998e47f8f0bad60a2e) |
| CVE-2024-56368 | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix overflow in __rb_map_vma An overflow occurred when performing the following calculation: nr_pages = ((nr_subbufs + 1) << subbuf_order) - pgoff; Add a check before the calculation to avoid this problem. syzbot reported this as a slab-out-of-bounds in __rb_map_vma: BUG: KASAN: slab-out-of-bounds in __rb_map_vma+0x9ab/0xae0 kernel/trace/ring_buffer.c:7058 Read of size 8 at addr ffff8880767dd2b8 by task syz-executor187/5836 CPU: 0 UID: 0 PID: 5836 Comm: syz-executor187 Not tainted 6.13.0-rc2-syzkaller-00159-gf932fb9b4074 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xc3/0x620 mm/kasan/report.c:489 kasan_report+0xd9/0x110 mm/kasan/report.c:602 __rb_map_vma+0x9ab/0xae0 kernel/trace/ring_buffer.c:7058 ring_buffer_map+0x56e/0x9b0 kernel/trace/ring_buffer.c:7138 tracing_buffers_mmap+0xa6/0x120 kernel/trace/trace.c:8482 call_mmap include/linux/fs.h:2183 [inline] mmap_file mm/internal.h:124 [inline] __mmap_new_file_vma mm/vma.c:2291 [inline] __mmap_new_vma mm/vma.c:2355 [inline] __mmap_region+0x1786/0x2670 mm/vma.c:2456 mmap_region+0x127/0x320 mm/mmap.c:1348 do_mmap+0xc00/0xfc0 mm/mmap.c:496 vm_mmap_pgoff+0x1ba/0x360 mm/util.c:580 ksys_mmap_pgoff+0x32c/0x5c0 mm/mmap.c:542 __do_sys_mmap arch/x86/kernel/sys_x86_64.c:89 [inline] __se_sys_mmap arch/x86/kernel/sys_x86_64.c:82 [inline] __x64_sys_mmap+0x125/0x190 arch/x86/kernel/sys_x86_64.c:82 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The reproducer for this bug is: ------------------------8<------------------------- #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <asm/types.h> #include <sys/mman.h> int main(int argc, char **argv) { int page_size = getpagesize(); int fd; void *meta; system("echo 1 > /sys/kernel/tracing/buffer_size_kb"); fd = open("/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw", O_RDONLY); meta = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, page_size * 5); } ------------------------>8------------------------- |
| CVE-2024-53056 | In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy() In mtk_crtc_create(), if the call to mbox_request_channel() fails then we set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation, we do not call cmdq_pkt_create(). During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan" is NULL first before calling cmdq_pkt_destroy(). Calling cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and it will result in a NULL pointer dereference. |
| CVE-2024-52560 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Mark inode as bad as soon as error detected in mi_enum_attr() Extended the `mi_enum_attr()` function interface with an additional parameter, `struct ntfs_inode *ni`, to allow marking the inode as bad as soon as an error is detected. |
| CVE-2024-50034 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC Eric report a panic on IPPROTO_SMC, and give the facts that when INET_PROTOSW_ICSK was set, icsk->icsk_sync_mss must be set too. Bug: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000005 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000001195d1000 [0000000000000000] pgd=0800000109c46003, p4d=0800000109c46003, pud=0000000000000000 Internal error: Oops: 0000000086000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 UID: 0 PID: 8037 Comm: syz.3.265 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : cipso_v4_sock_setattr+0x2a8/0x3c0 net/ipv4/cipso_ipv4.c:1910 sp : ffff80009b887a90 x29: ffff80009b887aa0 x28: ffff80008db94050 x27: 0000000000000000 x26: 1fffe0001aa6f5b3 x25: dfff800000000000 x24: ffff0000db75da00 x23: 0000000000000000 x22: ffff0000d8b78518 x21: 0000000000000000 x20: ffff0000d537ad80 x19: ffff0000d8b78000 x18: 1fffe000366d79ee x17: ffff8000800614a8 x16: ffff800080569b84 x15: 0000000000000001 x14: 000000008b336894 x13: 00000000cd96feaa x12: 0000000000000003 x11: 0000000000040000 x10: 00000000000020a3 x9 : 1fffe0001b16f0f1 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000002 x1 : 0000000000000000 x0 : ffff0000d8b78000 Call trace: 0x0 netlbl_sock_setattr+0x2e4/0x338 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa4/0x154 security/smack/smack_lsm.c:2593 smack_socket_post_create+0xa8/0x14c security/smack/smack_lsm.c:2973 security_socket_post_create+0x94/0xd4 security/security.c:4425 __sock_create+0x4c8/0x884 net/socket.c:1587 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x134/0x340 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __arm64_sys_socket+0x7c/0x94 net/socket.c:1718 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- This patch add a toy implementation that performs a simple return to prevent such panic. This is because MSS can be set in sock_create_kern or smc_setsockopt, similar to how it's done in AF_SMC. However, for AF_SMC, there is currently no way to synchronize MSS within __sys_connect_file. This toy implementation lays the groundwork for us to support such feature for IPPROTO_SMC in the future. |
| CVE-2024-49904 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add list empty check to avoid null pointer issue Add list empty check to avoid null pointer issues in some corner cases. - list_for_each_entry_safe() |
| CVE-2024-46820 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: remove irq disabling in vcn 5 suspend We do not directly enable/disable VCN IRQ in vcn 5.0.0. And we do not handle the IRQ state as well. So the calls to disable IRQ and set state are removed. This effectively gets rid of the warining of "WARN_ON(!amdgpu_irq_enabled(adev, src, type))" in amdgpu_irq_put(). |
| CVE-2024-46748 | In the Linux kernel, the following vulnerability has been resolved: cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT Set the maximum size of a subrequest that writes to cachefiles to be MAX_RW_COUNT so that we don't overrun the maximum write we can make to the backing filesystem. |
| CVE-2024-43844 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: wow: fix GTK offload H2C skbuff issue We mistakenly put skb too large and that may exceed skb->end. Therefore, we fix it. skbuff: skb_over_panic: text:ffffffffc09e9a9d len:416 put:204 head:ffff8fba04eca780 data:ffff8fba04eca7e0 tail:0x200 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 4747 Comm: kworker/u4:44 Tainted: G O 6.6.30-02659-gc18865c4dfbd #1 86547039b47e46935493f615ee31d0b2d711d35e Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.262.0 03/18/2021 Workqueue: events_unbound async_run_entry_fn RIP: 0010:skb_panic+0x5d/0x60 Code: c6 63 8b 8f bb 4c 0f 45 f6 48 c7 c7 4d 89 8b bb 48 89 ce 44 89 d1 41 56 53 41 53 ff b0 c8 00 00 00 e8 27 5f 23 00 48 83 c4 20 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 RSP: 0018:ffffaa700144bad0 EFLAGS: 00010282 RAX: 0000000000000089 RBX: 0000000000000140 RCX: 14432c5aad26c900 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: 0000000000000001 RBP: ffffaa700144bae0 R08: 0000000000000000 R09: ffffaa700144b920 R10: 00000000ffffdfff R11: ffffffffbc28fbc0 R12: ffff8fba4e57a010 R13: 0000000000000000 R14: ffffffffbb8f8b63 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8fba7bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007999c4ad1000 CR3: 000000015503a000 CR4: 0000000000350ee0 Call Trace: <TASK> ? __die_body+0x1f/0x70 ? die+0x3d/0x60 ? do_trap+0xa4/0x110 ? skb_panic+0x5d/0x60 ? do_error_trap+0x6d/0x90 ? skb_panic+0x5d/0x60 ? handle_invalid_op+0x30/0x40 ? skb_panic+0x5d/0x60 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? skb_panic+0x5d/0x60 skb_put+0x49/0x50 rtw89_fw_h2c_wow_gtk_ofld+0xbd/0x220 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5] rtw89_wow_resume+0x31f/0x540 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5] rtw89_ops_resume+0x2b/0xa0 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5] ieee80211_reconfig+0x84/0x13e0 [mac80211 818a894e3b77da6298269c59ed7cdff065a4ed52] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] ? dev_printk_emit+0x51/0x70 ? _dev_info+0x6e/0x90 ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] wiphy_resume+0x89/0x180 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] dpm_run_callback+0x3c/0x140 device_resume+0x1f9/0x3c0 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x29/0xd0 process_scheduled_works+0x1d8/0x3d0 worker_thread+0x1fc/0x2f0 kthread+0xed/0x110 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Modules linked in: ccm 8021q r8153_ecm cdc_ether usbnet r8152 mii dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc uinput rfcomm cmac algif_hash rtw89_8922ae(O) algif_skcipher rtw89_8922a(O) af_alg rtw89_pci(O) rtw89_core(O) btusb(O) snd_soc_sst_bxt_da7219_max98357a btbcm(O) snd_soc_hdac_hdmi btintel(O) snd_soc_intel_hda_dsp_common snd_sof_probes btrtl(O) btmtk(O) snd_hda_codec_hdmi snd_soc_dmic uvcvideo videobuf2_vmalloc uvc videobuf2_memops videobuf2_v4l2 videobuf2_common snd_sof_pci_intel_apl snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_intel_hda soundwire_intel soundwire_generic_allocation snd_sof_intel_hda_mlink soundwire_cadence snd_sof_pci snd_sof_xtensa_dsp mac80211 snd_soc_acpi_intel_match snd_soc_acpi snd_sof snd_sof_utils soundwire_bus snd_soc_max98357a snd_soc_avs snd_soc_hda_codec snd_hda_ext_core snd_intel_dspcfg snd_intel_sdw_acpi snd_soc_da7219 snd_hda_codec snd_hwdep snd_hda_core veth ip6table_nat xt_MASQUERADE xt_cgroup fuse bluetooth ecdh_generic cfg80211 ecc gsmi: Log Shutdown ---truncated--- |
| CVE-2024-42125 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fw: scan offload prohibit all 6 GHz channel if no 6 GHz sband We have some policy via BIOS to block uses of 6 GHz. In this case, 6 GHz sband will be NULL even if it is WiFi 7 chip. So, add NULL handling here to avoid crash. |
| CVE-2024-39293 | In the Linux kernel, the following vulnerability has been resolved: Revert "xsk: Support redirect to any socket bound to the same umem" This reverts commit 2863d665ea41282379f108e4da6c8a2366ba66db. This patch introduced a potential kernel crash when multiple napi instances redirect to the same AF_XDP socket. By removing the queue_index check, it is possible for multiple napi instances to access the Rx ring at the same time, which will result in a corrupted ring state which can lead to a crash when flushing the rings in __xsk_flush(). This can happen when the linked list of sockets to flush gets corrupted by concurrent accesses. A quick and small fix is not possible, so let us revert this for now. |
| CVE-2024-2236 | A timing-based side-channel flaw was found in libgcrypt's RSA implementation. This issue may allow a remote attacker to initiate a Bleichenbacher-style attack, which can lead to the decryption of RSA ciphertexts. |
| CVE-2023-20585 | Insufficient checks of the RMP on host buffer access in IOMMU may allow an attacker with privileges and a compromised hypervisor to trigger an out of bounds condition without RMP checks, resulting in a potential loss of confidential guest integrity. |
| CVE-2023-4010 | Rejected reason: Rejected because the CVE description attributes a vulnerability to a non-existent Linux kernel function (usb_giveback_urb()) and the reported issue cannot be mapped to any valid codebase. |
| CVE-2022-50332 | In the Linux kernel, the following vulnerability has been resolved: video/aperture: Call sysfb_disable() before removing PCI devices Call sysfb_disable() from aperture_remove_conflicting_pci_devices() before removing PCI devices. Without, simpledrm can still bind to simple-framebuffer devices after the hardware driver has taken over the hardware. Both drivers interfere with each other and results are undefined. Reported modesetting errors [1] are shown below. ---- snap ---- rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 7 jiffies s: 165 root: 0x2000/. rcu: blocking rcu_node structures (internal RCU debug): Task dump for CPU 13: task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x00000008 Call Trace: <TASK> ? commit_tail+0xd7/0x130 ? drm_atomic_helper_commit+0x126/0x150 ? drm_atomic_commit+0xa4/0xe0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c ? drm_atomic_helper_dirtyfb+0x19e/0x280 ? drm_mode_dirtyfb_ioctl+0x10f/0x1e0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? drm_ioctl_kernel+0xc4/0x150 ? drm_ioctl+0x246/0x3f0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? __x64_sys_ioctl+0x91/0xd0 ? do_syscall_64+0x60/0xd0 ? entry_SYSCALL_64_after_hwframe+0x4b/0xb5 </TASK> ... rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 30 jiffies s: 169 root: 0x2000/. rcu: blocking rcu_node structures (internal RCU debug): Task dump for CPU 13: task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x0000400e Call Trace: <TASK> ? memcpy_toio+0x76/0xc0 ? memcpy_toio+0x1b/0xc0 ? drm_fb_memcpy_toio+0x76/0xb0 ? drm_fb_blit_toio+0x75/0x2b0 ? simpledrm_simple_display_pipe_update+0x132/0x150 ? drm_atomic_helper_commit_planes+0xb6/0x230 ? drm_atomic_helper_commit_tail+0x44/0x80 ? commit_tail+0xd7/0x130 ? drm_atomic_helper_commit+0x126/0x150 ? drm_atomic_commit+0xa4/0xe0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c ? drm_atomic_helper_dirtyfb+0x19e/0x280 ? drm_mode_dirtyfb_ioctl+0x10f/0x1e0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? drm_ioctl_kernel+0xc4/0x150 ? drm_ioctl+0x246/0x3f0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? __x64_sys_ioctl+0x91/0xd0 ? do_syscall_64+0x60/0xd0 ? entry_SYSCALL_64_after_hwframe+0x4b/0xb5 </TASK> The problem was added by commit 5e0137612430 ("video/aperture: Disable and unregister sysfb devices via aperture helpers") to v6.0.3 and does not exist in the mainline branch. The mainline commit 5e0137612430 ("video/aperture: Disable and unregister sysfb devices via aperture helpers") has been backported from v6.0-rc1 to stable v6.0.3 from a larger patch series [2] that reworks fbdev framebuffer ownership. The backport misses a change to aperture_remove_conflicting_pci_devices(). Mainline itself is fine, because the function does not exist there as a result of the patch series. Instead of backporting the whole series, fix the additional function. |
| CVE-2015-8553 | Xen allows guest OS users to obtain sensitive information from uninitialized locations in host OS kernel memory by not enabling memory and I/O decoding control bits. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-0777. |
