Install and Configure MySQL for Cloudera Software

You can install a MySQL database for use with Cloudera Manager and other components that require a database.

To use a MySQL database, follow these procedures. For information on compatible versions of the MySQL database, see Database Requirements.

Before you begin

Ensure that the MySQL DB is configured with the InnoDB engine by running the following command from the MySQL shell:
mysql> show table status;

Installing the MySQL Server

  1. Install the MySQL database:
    OS Command
    RHEL

    MySQL is no longer included with RHEL. You must download the repository from the MySQL site and install it directly. You can use the following commands to install MySQL. For more information, visit the MySQL website.

    wget <URL to MySQL RPM>
    sudo rpm -ivh <filename>.rpm
    sudo yum update
    sudo yum install mysql-server
    sudo systemctl start mysqld
    SLES
    sudo zypper install mysql libmysqlclient_r17
    Ubuntu
    sudo apt-get install mysql-server

Configuring and Starting the MySQL Server

  1. Stop the MySQL server if it is running.
    OS Command
    RHEL 7 compatible, SLES, and Ubuntu
    sudo systemctl stop mysqld
  2. Move old InnoDB log files /var/lib/mysql/ib_logfile0 and /var/lib/mysql/ib_logfile1 out of /var/lib/mysql/ to a backup location.
  3. Determine the location of the option file, my.cnf (/etc/my.cnf by default).
  4. Update my.cnf so that it conforms to the following requirements:
    • To prevent deadlocks, set the isolation level to READ-COMMITTED.
    • Configure the InnoDB engine.
    • The default settings in the MySQL installations in most distributions use conservative buffer sizes and memory usage. Cloudera Management Service roles need high write throughput because they might insert many records in the database. Cloudera recommends that you set the innodb_flush_method property to O_DIRECT.
    • Set the max_connections property according to the size of your cluster:
      • Fewer than 50 hosts - You can store more than one database (for example, both the Cloudera Manager Server and Reports Manager) on the same host. If you do this, you should:
        • Put each database on its own physical disk for best performance. You can do this by manually setting up symbolic links or running multiple database instances (each instance uses a different data directory path).
        • Allow 100 maximum connections for each database and then add 50 extra connections. For example, for two databases, set the maximum connections to 250. If you store four databases on one host (the databases for Cloudera Manager Server, Hue, Reports Manager, and Hive metastore), set the maximum connections to 450.
      • More than 50 hosts - Do not store more than one database on the same host. Use a separate host for each database/host pair. The hosts do not need to be reserved exclusively for databases, but each database should be on a separate host.
    • If the cluster has more than 1000 hosts, set the max_allowed_packet property to 16M. Without this setting, the cluster may fail to start due to the following exception: com.mysql.jdbc.PacketTooBigException.
    • Binary logging is not a requirement for Cloudera Manager installations. Binary logging provides benefits such as MySQL replication or point-in-time incremental recovery after database restore. Examples of this configuration follow. For more information, see The Binary Log.
    Here is an option file with Cloudera recommended settings:
    [mysqld]
    datadir=/var/lib/mysql
    socket=/var/lib/mysql/mysql.sock
    transaction-isolation = READ-COMMITTED
    # Disabling symbolic-links is recommended to prevent assorted security risks;
    # to do so, uncomment this line:
    symbolic-links = 0
    
    key_buffer_size = 32M
    max_allowed_packet = 16M
    thread_stack = 256K
    thread_cache_size = 64
    
    # The following 3 parameters only apply to MySQL version 5.7 and lower:
    query_cache_limit = 8M
    query_cache_size = 64M
    query_cache_type = 1
    
    max_connections = 550
    #expire_logs_days = 10
    #max_binlog_size = 100M
    
    #log_bin should be on a disk with enough free space.
    #Replace '/var/lib/mysql/mysql_binary_log' with an appropriate path for your
    #system and chown the specified folder to the mysql user.
    log_bin=/var/lib/mysql/mysql_binary_log
    
    #In later versions of MySQL, if you enable the binary log and do not set
    #a server_id, MySQL will not start. The server_id must be unique within
    #the replicating group.
    server_id=1
    
    binlog_format = mixed
    
    read_buffer_size = 2M
    read_rnd_buffer_size = 16M
    sort_buffer_size = 8M
    join_buffer_size = 8M
    
    # InnoDB settings
    innodb_file_per_table = 1
    innodb_flush_log_at_trx_commit  = 2
    innodb_log_buffer_size = 64M
    innodb_buffer_pool_size = 4G
    innodb_thread_concurrency = 8
    innodb_flush_method = O_DIRECT
    innodb_log_file_size = 512M
    
    [mysqld_safe]
    log-error=/var/log/mysqld.log
    pid-file=/var/run/mysqld/mysqld.pid
    
    sql_mode=STRICT_ALL_TABLES
  5. If you are using MySQL version 8, remove the following three parameters from the options file:
    query_cache_limit = 8M
    query_cache_size = 64M
    query_cache_type = 1
  6. If AppArmor is running on the host where MySQL is installed, you might need to configure AppArmor to allow MySQL to write to the binary.
  7. Ensure the MySQL server starts at boot:
    OS Command
    RHEL 7 compatible, SLES, and Ubuntu
    sudo systemctl enable mysqld
  8. Start the MySQL server:
    OS Command
    RHEL 7 compatible, SLES, and Ubuntu
    sudo systemctl start mysqld
  9. Run /usr/bin/mysql_secure_installation to set the MySQL root password and other security-related settings. In a new installation, the root password is blank. Press the Enter key when you're prompted for the root password. For the rest of the prompts, enter the responses listed below in bold:
    sudo /usr/bin/mysql_secure_installation
    [...]
    Enter current password for root (enter for none):
    OK, successfully used password, moving on...
    [...]
    Set root password? [Y/n] Y
    New password:
    Re-enter new password:
    Remove anonymous users? [Y/n] Y
    [...]
    Disallow root login remotely? [Y/n] N
    [...]
    Remove test database and access to it [Y/n] Y
    [...]
    Reload privilege tables now? [Y/n] Y
    All done!

Installing the MySQL JDBC Driver

Install the JDBC driver on the Cloudera Manager Server host, as well as any other hosts running services that require database access.

Cloudera recommends that you consolidate all roles that require databases on a limited number of hosts, and install the driver on those hosts. Locating all such roles on the same hosts is recommended but not required. Make sure to install the JDBC driver on each host running roles that access the database.
OS Command
RHEL
  1. Download the MySQL JDBC driver from http://www.mysql.com/downloads/connector/j/5.1.html (in .tar.gz format). As of the time of writing, you can download version 5.1.48 using wget as follows:
    wget https://dev.mysql.com/get/Downloads/Connector-J/mysql-connector-java-5.1.48.tar.gz
  2. Extract the JDBC driver JAR file from the downloaded file. For example:
    tar zxvf mysql-connector-java-5.1.48.tar.gz
  3. Copy the JDBC driver, renamed, to /usr/share/java/. If the target directory does not yet exist, create it. For example:
    sudo mkdir -p /usr/share/java/
    cd mysql-connector-java-5.1.48
    sudo cp mysql-connector-java-5.1.48-bin.jar /usr/share/java/mysql-connector-java.jar
SLES
sudo zypper install mysql-connector-java
Ubuntu
sudo apt-get install libmysql-java

Installing the MySQL client

CDP uses Python version 3.8. To use MySQL as a backend database for Hue, you must install the MySQL client and other required dependencies on all the Hue hosts based on your operating system.

  1. SSH into the Hue host as a root user.
  2. Download the MySQL yum repository as follows:
    curl -sSLO https://dev.mysql.com/get/mysql80-community-release-el7-5.noarch.rpm
  3. Install the package as follows:
    rpm -ivh mysql80-community-release-el7-5.noarch.rpm
  4. Install the required dependencies as follows:
    yum install mysql-devel
    yum install -y xmlsec1  xmlsec1-openssl
    For MySQL version 8.0.27, add the mysql-community-client-8.0.25 client package as follows:
    yum install mysql-community-client-8.0.25
  5. Add the path where you installed the MySQL client and packages to the PATH environment variable as follows:
    export PATH=/usr/local/bin:$PATH
  6. Install the MySQL client as follows:
    pip3.8 install mysqlclient
  1. SSH into the Hue host as a root user.
  2. Download the MySQL yum repository as follows:
    curl -sSLO https://dev.mysql.com/get/mysql80-community-release-el7-5.noarch.rpm
  3. Install the package as follows:
    rpm -ivh mysql80-community-release-el7-5.noarch.rpm
  4. Install the required dependencies as follows:
    yum install mysql-devel
    yum install -y xmlsec1  xmlsec1-openssl
  5. Add the path where you installed the MySQL client and packages to the PATH environment variable as follows:
    export PATH=/usr/local/bin:$PATH
  6. Install the MySQL client as follows:
    pip3.8 install mysqlclient
  1. SSH into the Hue host as a root user.
  2. Install the required packages and dependencies as follows:
    zypper install libmysqlclient-devel
    zypper install xmlsec1
    zypper install xmlsec1-devel
    zypper install xmlsec1-openssl-devel
  3. Add the path where you installed the packages to the PATH environment variable as follows:
    export PATH=/usr/local/bin:$PATH
  4. Install the MySQL client as follows:
    pip3.8 install mysqlclient
  1. SSH into the Hue host as a root user.
  2. Install the required packages and dependencies as follows:
    apt-get install libmysqlclient-dev
    apt-get install -y xmlsec1
    apt-get install libxmlsec1-openssl
  3. Add the path where you installed the packages to the PATH environment variable as follows:
    export PATH=/usr/local/bin:$PATH
  4. Install the MySQL client as follows:
    pip3.8 install mysqlclient

Creating Databases for Cloudera Software

Services that require databases

Create databases and service accounts for components that require databases:

  • Cloudera Manager Server
  • Cloudera Management Service roles:
    • Reports Manager
  • Data Analytics Studio (DAS) Supported with PostgreSQL only.
  • Hue
  • Each Hive metastore
  • Oozie
  • Data Analytics Studio
  • Schema Registry
  • Streams Messaging Manager

Steps

  1. Log in as the root user, or another user with privileges to create database and grant privileges:
    mysql -u root -p
    Enter password:
  2. Create databases for each service deployed in the cluster using the following commands. You can use any value you want for the <database>, <user>, and <password> parameters. The Databases for Cloudera Software table, below lists the default names provided in the Cloudera Manager configuration settings, but you are not required to use them.

    Configure all databases to use the utf8 character set.

    Include the character set for each database when you run the CREATE DATABASE statements described below.

    CREATE DATABASE <database> DEFAULT CHARACTER SET utf8 DEFAULT COLLATE utf8_general_ci;
    Query OK, 1 row affected (0.00 sec)

    Create USER by following the steps in this topic: CREATE USER Statement.

    GRANT ALL ON <database>.* TO '<user>'@'%' IDENTIFIED BY '<password>';
    Query OK, 0 rows affected (0.00 sec)
    Table 1. Databases for Cloudera Software
    Service Database User
    Cloudera Manager Server scm scm
    Reports Manager rman rman
    Ranger RHEL/CentOS/Ubuntu ranger rangeradmin
    Ranger KMS RHEL/CentOS ranger rangerkms
    Hue hue hue
    Hive Metastore Server hive hive
    Oozie oozie oozie
    Data Analytics Studio (DAS) Supported with PostgreSQL only. das das
    Schema Registry schemaregistry schemaregistry
    Streams Messaging Manager smm smm
  3. Confirm that you have created all of the databases:
    SHOW DATABASES;
    You can also confirm the privilege grants for a given user by running:
    SHOW GRANTS FOR '<user>'@'%';
  4. Record the values you enter for database names, usernames, and passwords. The Cloudera Manager installation wizard requires this information to correctly connect to these databases.

Next Steps