Configuring the Hive Metastore for CDH

The Hive metastore service stores the metadata for Hive tables and partitions in a relational database, and provides clients (including Hive) access to this information using the metastore service API. This page explains deployment options and provides instructions for setting up a database in a recommended configuration.

Metastore Deployment Modes

Embedded Mode

Cloudera recommends using this mode for experimental purposes only.


Embedded mode is the default metastore deployment mode for CDH. In this mode, the metastore uses a Derby database, and both the database and the metastore service are embedded in the main HiveServer process. Both are started for you when you start the HiveServer process. This mode requires the least amount of effort to configure, but it can support only one active user at a time and is not certified for production use.

Local Mode



In Local mode, the Hive metastore service runs in the same process as the main HiveServer process, but the metastore database runs in a separate process, and can be on a separate host. The embedded metastore service communicates with the metastore database over JDBC.

Remote Mode

Cloudera recommends that you use this mode.


In Remote mode, the Hive metastore service runs in its own JVM process. HiveServer2, HCatalog, Impala, and other processes communicate with it using the Thrift network API (configured using the hive.metastore.uris property). The metastore service communicates with the metastore database over JDBC (configured using the javax.jdo.option.ConnectionURL property). The database, the HiveServer process, and the metastore service can all be on the same host, but running the HiveServer process on a separate host provides better availability and scalability.

The main advantage of Remote mode over Local mode is that Remote mode does not require the administrator to share JDBC login information for the metastore database with each Hive user. HCatalog requires this mode.

Supported Metastore Databases

For up-to-date information, see CDH and Cloudera Manager Supported Databases. Cloudera strongly encourages you to use MySQL because it is the most popular with the rest of the Hive user community, and, hence, receives more testing than the other options. For installation information, see:

In addition to the above supported databases, CDH also supports using MariaDB. For information about installing and configuring MariaDB for CDH, see Install and Configure MariaDB for Cloudera Software.

Metastore Memory and Hardware Requirements

Component Java Heap CPU Disk
HiveServer 2 Single Connection 4 GB Minimum 4 dedicated cores

Minimum 1 disk

This disk is required for the following:

  • HiveServer2 log files
  • stdout and stderr output files
  • Configuration files
  • Operation logs stored in the operation_logs_dir directory, which is configurable
  • Any temporary files that might be created by local map tasks under the /tmp directory
2-10 connections 4-6 GB
11-20 connections 6-12 GB
21-40 connections 12-16 GB
41 to 80 connections 16-24 GB

Cloudera recommends splitting HiveServer2 into multiple instances and load balancing them once you start allocating more than 16 GB to HiveServer2. The objective is to adjust the size to reduce the impact of Java garbage collection on active processing by the service.

Set this value using the Java Heap Size of HiveServer2 in Bytes Hive configuration property.

For more information, see Tuning Hive in CDH.

Hive Metastore Single Connection 4 GB Minimum 4 dedicated cores

Minimum 1 disk

This disk is required so that the Hive metastore can store the following artifacts:

  • Logs
  • Configuration files
  • Backend database that is used to store metadata if the database server is also hosted on the same node
2-10 connections 4-10 GB
11-20 connections 10-12 GB
21-40 connections 12-16 GB
41 to 80 connections 16-24 GB

Set this value using the Java Heap Size of Hive Metastore Server in Bytes Hive configuration property.

For more information, see Tuning Hive in CDH.

Beeline CLI Minimum: 2 GB N/A N/A

For information on configuring heap for Hive metaStore, as well as HiveServer2 and Hive clients, see Configuring Heap Size and Garbage Collection.

Configuring the Metastore Database

This section describes how to configure Hive to use a remote database, with examples for MySQL, PostgreSQL, and Oracle.

The configuration properties for the Hive metastore are documented in the Hive Metastore Administration documentation on the Apache wiki.

Configuring a Remote MySQL Database for the Hive Metastore

Cloudera recommends you configure a database for the metastore on one or more remote servers that reside on a host or hosts separate from the HiveServer1 or HiveServer2 process. MySQL is the most popular database to use. Use the following steps to configure a remote metastore. If you are planning to use a cloud service database, such as Amazon Relational Database Service (RDS), see How To Set Up a Shared Amazon RDS as Your Hive Metastore for CDH for information about how to set up a shared Amazon RDS as your Hive metastore.
  1. Install and start MySQL if you have not already done so
    To install MySQL on a RHEL system:
    $ sudo yum install mysql-server
    To install MySQL on a SLES system:
    $ sudo zypper install mysql
    $ sudo zypper install libmysqlclient_r17
    To install MySQL on a Debian/Ubuntu system:
    $ sudo apt-get install mysql-server
    After using the command to install MySQL, you may need to respond to prompts to confirm that you do want to complete the installation. After installation completes, start the mysql daemon.
    On RHEL systems
    $ sudo service mysqld start
    On SLES and Debian/Ubuntu systems
    $ sudo service mysql start
  2. Configure the MySQL service and connector

    Before you can run the Hive metastore with a remote MySQL database, you must configure a connector to the remote MySQL database, set up the initial database schema, and configure the MySQL user account for the Hive user.

    To install the MySQL connector on a RHEL 6 system:

    On the Hive metastore server host, install mysql-connector-java and symbolically link the file into the /usr/lib/hive/lib/ directory.

    $ sudo yum install mysql-connector-java
    $ ln -s /usr/share/java/mysql-connector-java.jar /usr/lib/hive/lib/mysql-connector-java.jar

    To install the MySQL connector on a RHEL 5 system:

    Download the MySQL JDBC driver from http://www.mysql.com/downloads/connector/j/5.1.html. You will need to sign up for an account if you do not already have one, and log in, before you can download it. Then copy it to the /usr/lib/hive/lib/ directory. For example:

    $ sudo cp mysql-connector-java-version/mysql-connector-java-version-bin.jar /usr/lib/hive/lib/

    To install the MySQL connector on a SLES system:

    On the Hive metastore server host, install mysql-connector-java and symbolically link the file into the /usr/lib/hive/lib/ directory.

    $ sudo zypper install mysql-connector-java
    $ ln -s /usr/share/java/mysql-connector-java.jar /usr/lib/hive/lib/mysql-connector-java.jar

    To install the MySQL connector on a Debian/Ubuntu system:

    On the Hive metastore server host, install mysql-connector-java and symbolically link the file into the /usr/lib/hive/lib/ directory.

    $ sudo apt-get install libmysql-java
    $ ln -s /usr/share/java/libmysql-java.jar /usr/lib/hive/lib/libmysql-java.jar

    Configure MySQL to use a strong password and to start at boot. Note that in the following procedure, your current root password is blank. Press the Enter key when you're prompted for the root password.

    To set the MySQL root password:

    $ sudo /usr/bin/mysql_secure_installation
    [...]
    Enter current password for root (enter for none):
    OK, successfully used password, moving on...
    [...]
    Set root password? [Y/n] y
    New password:
    Re-enter new password:
    Remove anonymous users? [Y/n] Y
    [...]
    Disallow root login remotely? [Y/n] N
    [...]
    Remove test database and access to it [Y/n] Y
    [...]
    Reload privilege tables now? [Y/n] Y
    All done!

    To make sure the MySQL server starts at boot:

    • On RHEL systems:
    $ sudo /sbin/chkconfig mysqld on
    $ sudo /sbin/chkconfig --list mysqld
    mysqld          0:off   1:off   2:on    3:on    4:on    5:on    6:off
    • On SLES systems:
    $ sudo chkconfig --add mysql
    • On Debian/Ubuntu systems:
    $ sudo chkconfig mysql on
  3. Create the database and user

    The instructions in this section assume you are using Remote mode, and that the MySQL database is installed on a separate host from the metastore service, which is running on a host named metastorehost in the example.

    Create the initial database schema. Cloudera recommends using the Hive schema tool to do this.

    If for some reason you decide not to use the schema tool, you can use the hive-schema-n.n.n.mysql.sql file instead; that file is located in the /usr/lib/hive/scripts/metastore/upgrade/mysql/ directory. (n.n.n is the current Hive version, for example 1.1.0.) Proceed as follows if you decide to use hive-schema-n.n.n.mysql.sql.

    Example using hive-schema-n.n.nmysql.sql

    $ mysql -u root -p
    Enter password:
    mysql> CREATE DATABASE metastore;
    mysql> USE metastore;
    mysql> SOURCE /usr/lib/hive/scripts/metastore/upgrade/mysql/hive-schema-n.n.n.mysql.sql;

    You also need a MySQL user account for Hive to use to access the metastore. It is very important to prevent this user account from creating or altering tables in the metastore database schema.

    Example

    mysql> CREATE USER 'hive'@'metastorehost' IDENTIFIED BY 'mypassword';
    ...
    mysql> REVOKE ALL PRIVILEGES, GRANT OPTION FROM 'hive'@'metastorehost';
    mysql> GRANT ALL PRIVILEGES ON metastore.* TO 'hive'@'metastorehost';
    mysql> FLUSH PRIVILEGES;
    mysql> quit;
  4. Configure the metastore service to communicate with the MySQL database

    This step shows the configuration properties you need to set in hive-site.xml (/usr/lib/hive/conf/hive-site.xml) to configure the metastore service to communicate with the MySQL database, and provides sample settings. Though you can use the same hive-site.xml on all hosts (client, metastore, HiveServer), hive.metastore.uris is the only property that must be configured on all of them; the others are used only on the metastore host.

    Given a MySQL database running on myhost and the user account hive with the password mypassword, set the configuration as follows (overwriting any existing values).

    <property>
      <name>javax.jdo.option.ConnectionURL</name>
      <value>jdbc:mysql://myhost/metastore</value>
      <description>the URL of the MySQL database</description>
    </property>
    
    <property>
      <name>javax.jdo.option.ConnectionDriverName</name>
      <value>com.mysql.jdbc.Driver</value>
    </property>
    
    <property>
      <name>javax.jdo.option.ConnectionUserName</name>
      <value>hive</value>
    </property>
    
    <property>
      <name>javax.jdo.option.ConnectionPassword</name>
      <value>mypassword</value>
    </property>
    
    <property>
      <name>datanucleus.autoCreateSchema</name>
      <value>false</value>
    </property>
    
    <property>
      <name>datanucleus.fixedDatastore</name>
      <value>true</value>
    </property>
    
    <property>
      <name>datanucleus.autoStartMechanism</name> 
      <value>SchemaTable</value>
    </property> 
    
    <property>
      <name>hive.metastore.uris</name>
      <value>thrift://<n.n.n.n>:9083</value>
      <description>IP address (or fully-qualified domain name) and port of the metastore host</description>
    </property>
    
    <property>
    <name>hive.metastore.schema.verification</name>
    <value>true</value>
    </property>

Configuring a Remote PostgreSQL Database for the Hive Metastore

Before you can run the Hive metastore with a remote PostgreSQL database, you must configure a connector to the remote PostgreSQL database, set up the initial database schema, and configure the PostgreSQL user account for the Hive user.
  1. Install and start PostgreSQL if you have not already done so

    To install PostgreSQL on a RHEL system:

    $ sudo yum install postgresql-server

    To install PostgreSQL on a SLES system:

    $ sudo zypper install postgresql-server

    To install PostgreSQL on a Debian/Ubuntu system:

    $ sudo apt-get install postgresql

    After using the command to install PostgreSQL, you may need to respond to prompts to confirm that you do want to complete the installation. In order to finish installation on RHEL compatible systems, you need to initialize the database. Please note that this operation is not needed on Ubuntu and SLES systems as it's done automatically on first start:

    To initialize database files on RHEL compatible systems

    $ sudo service postgresql initdb

    To ensure that your PostgreSQL server will be accessible over the network, you need to do some additional configuration.

    First you need to edit the postgresql.conf file. Set the listen_addresses property to *, to make sure that the PostgreSQL server starts listening on all your network interfaces. Also make sure that the standard_conforming_strings property is set to off.

    You can check that you have the correct values as follows:

    On Red-Hat-compatible systems:

    $ sudo cat /var/lib/pgsql/data/postgresql.conf  | grep -e listen -e standard_conforming_strings
    listen_addresses = '*'
    standard_conforming_strings = off

    On SLES systems:

    $ sudo cat /var/lib/pgsql/data/postgresql.conf  | grep -e listen -e standard_conforming_strings
    listen_addresses = '*'
    standard_conforming_strings = off

    On Ubuntu and Debian systems:

    $ cat /etc/postgresql/9.1/main/postgresql.conf | grep -e listen -e standard_conforming_strings
    listen_addresses = '*'
    standard_conforming_strings = off

    You also need to configure authentication for your network in pg_hba.conf. You need to make sure that the PostgreSQL user that you will create later in this procedure will have access to the server from a remote host. To do this, add a new line into pg_hba.con that has the following information:

    host    <database>         <user>         <network address>         <mask>               md5

    The following example allows all users to connect from all hosts to all your databases:

    host    all         all         0.0.0.0         0.0.0.0               md5

    After completing the installation and configuration, you can start the database server:

    Start PostgreSQL Server

    $ sudo service postgresql start

    Use chkconfig utility to ensure that your PostgreSQL server will start at a boot time. For example:

    chkconfig postgresql on

    You can use the chkconfig utility to verify that PostgreSQL server will be started at boot time, for example:

    chkconfig --list postgresql
  2. Install the PostgreSQL JDBC driver

    Before you can run the Hive metastore with a remote PostgreSQL database, you must configure a JDBC driver to the remote PostgreSQL database, set up the initial database schema, and configure the PostgreSQL user account for the Hive user.

    To install the PostgreSQL JDBC Driver on a RHEL 6 system:

    On the Hive metastore server host, install postgresql-jdbc package and create symbolic link to the /usr/lib/hive/lib/ directory. For example:

    $ sudo yum install postgresql-jdbc
    $ ln -s /usr/share/java/postgresql-jdbc.jar /usr/lib/hive/lib/postgresql-jdbc.jar

    To install the PostgreSQL connector on a RHEL 5 system:

    You need to manually download the PostgreSQL connector from http://jdbc.postgresql.org/download.html and move it to the /usr/lib/hive/lib/ directory. For example:

    $ wget http://jdbc.postgresql.org/download/postgresql-9.2-1002.jdbc4.jar
    $ mv postgresql-9.2-1002.jdbc4.jar /usr/lib/hive/lib/

    To install the PostgreSQL JDBC Driver on a SLES system:

    On the Hive metastore server host, install postgresql-jdbc and symbolically link the file into the /usr/lib/hive/lib/ directory.

    $ sudo zypper install postgresql-jdbc
    $ ln -s /usr/share/java/postgresql-jdbc.jar
    /usr/lib/hive/lib/postgresql-jdbc.jar

    To install the PostgreSQL JDBC Driver on a Debian/Ubuntu system:

    On the Hive metastore server host, install libpostgresql-jdbc-java and symbolically link the file into the /usr/lib/hive/lib/ directory.

    $ sudo apt-get install libpostgresql-jdbc-java
    $ ln -s /usr/share/java/postgresql-jdbc4.jar /usr/lib/hive/lib/postgresql-jdbc4.jar
  3. Create the metastore database and user account

    Proceed as in the following example, using the appropriate script in /usr/lib/hive/scripts/metastore/upgrade/postgres/ n.n.n is the current Hive version, for example 1.1.0:

    $ sudo -u postgres psql
    postgres=# CREATE USER hiveuser WITH PASSWORD 'mypassword';
    postgres=# CREATE DATABASE metastore;
    postgres=# \c metastore;
    You are now connected to database 'metastore'.
    postgres=# \i /usr/lib/hive/scripts/metastore/upgrade/postgres/hive-schema-n.n.n.postgres.sql
    SET
    SET
    ...
    Now you need to grant permission for all metastore tables to user hiveuser. PostgreSQL does not have statements to grant the permissions for all tables at once; you'll need to grant the permissions one table at a time. You could automate the task with the following SQL script:
    bash# sudo -u postgres psql
    metastore=# \c metastore
    metastore=# \pset tuples_only on
    metastore=# \o /tmp/grant-privs
    metastore=#   SELECT 'GRANT SELECT,INSERT,UPDATE,DELETE ON "'  || schemaname || '". "' ||tablename ||'" TO hiveuser ;'
    metastore-#   FROM pg_tables
    metastore-#   WHERE tableowner = CURRENT_USER and schemaname = 'public';
    metastore=# \o
    metastore=# \pset tuples_only off
    metastore=# \i /tmp/grant-privs

    You can verify the connection from the machine where you'll be running the metastore service as follows:

    psql -h myhost -U hiveuser -d metastore
    metastore=#
  4. Configure the metastore service to communicate with the PostgreSQL database

    This step shows the configuration properties you need to set in hive-site.xml (/usr/lib/hive/conf/hive-site.xml) to configure the metastore service to communicate with the PostgreSQL database. Though you can use the same hive-site.xml on all hosts (client, metastore, HiveServer), hive.metastore.uris is the only property that must be configured on all of them; the others are used only on the metastore host.

    Given a PostgreSQL database running on host myhost under the user account hive with the password mypassword, you would set configuration properties as follows.

    <property>
      <name>javax.jdo.option.ConnectionURL</name>
      <value>jdbc:postgresql://myhost/metastore</value>
    </property>
     
    <property>
      <name>javax.jdo.option.ConnectionDriverName</name>
      <value>org.postgresql.Driver</value>
    </property>
     
    <property>
      <name>javax.jdo.option.ConnectionUserName</name>
      <value>hiveuser</value>
    </property>
     
    <property>
      <name>javax.jdo.option.ConnectionPassword</name>
      <value>mypassword</value>
    </property>
     
    <property>
      <name>datanucleus.autoCreateSchema</name>
      <value>false</value>
    </property>
    
    <property>
      <name>hive.metastore.uris</name>
      <value>thrift://<n.n.n.n>:9083</value>
      <description>IP address (or fully-qualified domain name) and port of the metastore host</description>
    </property>
    
    <property>
    <name>hive.metastore.schema.verification</name>
    <value>true</value>
    </property>
  5. Test connectivity to the metastore
    $ hive –e “show tables;”

Configuring a Remote Oracle Database for the Hive Metastore

Before you can run the Hive metastore with a remote Oracle database, you must configure a connector to the remote Oracle database, set up the initial database schema, and configure the Oracle user account for the Hive user.

  1. Install and start Oracle

    The Oracle database is not part of any Linux distribution and must be purchased, downloaded and installed separately. You can use the Express edition, which can be downloaded free from the Oracle website.

  2. Install the Oracle JDBC Driver

    You must download the Oracle JDBC Driver from the Oracle website and put the JDBC JAR file into the /usr/lib/hive/lib/ directory. For example, the version 6 JAR file is named ojdbc6.jar. To download the JDBC driver, visit the Oracle JDBC and UCP Downloads page, and click on the link for your Oracle Database version. Download the ojdbc6.jar file (or ojdbc8.jar, for Oracle Database 12.2).

    sudo mv ojdbc<version_number>.jar /usr/lib/hive/lib/
  3. Create the metastore database and user account

    Connect to your Oracle database as an administrator and create the user that will use the Hive metastore.

    $ sqlplus "sys as sysdba"
    SQL> create user hiveuser identified by mypassword;
    SQL> grant connect to hiveuser;
    SQL> grant all privileges to hiveuser;

    Connect as the newly created hiveuser user and load the initial schema, as in the following example. Use the appropriate script for the current release (for example hive-schema-1.1.0.oracle.sql) in /usr/lib/hive/scripts/metastore/upgrade/oracle/ :

    $ sqlplus hiveuser
    SQL> @/usr/lib/hive/scripts/metastore/upgrade/oracle/hive-schema-n.n.n.oracle.sql

    Connect back as an administrator and remove the power privileges from user hiveuser. Then grant limited access to all the tables:

    $ sqlplus "sys as sysdba"
    SQL> revoke all privileges from hiveuser;
    SQL> BEGIN
      2     FOR R IN (SELECT owner, table_name FROM all_tables WHERE owner='HIVEUSER') LOOP
      3        EXECUTE IMMEDIATE 'grant  SELECT,INSERT,UPDATE,DELETE on '||R.owner||'.'||R.table_name||' to hiveuser';
      4     END LOOP;
      5  END;
      6  
      7  /
  4. Configure the metastore service to Communicate with the Oracle Database

    This step shows the configuration properties you need to set in hive-site.xml (/usr/lib/hive/conf/hive-site.xml) to configure the metastore service to communicate with the Oracle database, and provides sample settings. Though you can use the same hive-site.xml on all hosts (client, metastore, HiveServer), hive.metastore.uris is the only property that must be configured on all of them; the others are used only on the metastore host.

    Example

    Given an Oracle database running on myhost and the user account hiveuser with the password mypassword, set the configuration as follows (overwriting any existing values):

    <property>
      <name>javax.jdo.option.ConnectionURL</name>
      <value>jdbc:oracle:thin:@//myhost/xe</value>
    </property>
     
    <property>
      <name>javax.jdo.option.ConnectionDriverName</name>
      <value>oracle.jdbc.OracleDriver</value>
    </property>
     
    <property>
      <name>javax.jdo.option.ConnectionUserName</name>
      <value>hiveuser</value>
    </property>
     
    <property>
      <name>javax.jdo.option.ConnectionPassword</name>
      <value>mypassword</value>
    </property>
     
    <property>
      <name>datanucleus.autoCreateSchema</name>
      <value>false</value>
    </property>
     
    <property>
      <name>datanucleus.fixedDatastore</name>
      <value>true</value>
    </property>
     
    <property>
      <name>hive.metastore.uris</name>
      <value>thrift://<n.n.n.n>:9083</value>
      <description>IP address (or fully-qualified domain name) and port of the metastore host</description>
    </property>
    
    <property>
    <name>hive.metastore.schema.verification</name>
    <value>true</value>
    </property>