Using Impala through a Proxy for High Availability
For most clusters that have multiple users and production availability requirements, you might set up a proxy server to relay requests to and from Impala.
Currently, the Impala statestore mechanism does not include such proxying and load-balancing features. Set up a software package of your choice to perform these functions.
Overview of Proxy Usage and Load Balancing for Impala
Using a load-balancing proxy server for Impala has the following advantages:
- Applications connect to a single well-known host and port, rather than keeping track of the hosts where the impalad daemon is running.
- If any host running the impalad daemon becomes unavailable, application connection requests still succeed because you always connect to the proxy server rather than a specific host running the impalad daemon.
- The coordinator node for each Impala query potentially requires more memory and CPU cycles than the other nodes that process the query. The proxy server can schedule queries so that each connection uses a different coordinator node. This load-balancing technique lets the Impala nodes share this additional work, rather than concentrating it on a single machine.
The following setup steps are a general outline that apply to any load-balancing proxy software:
- Select and download a load-balancing proxy software or other load-balancing hardware appliance. It should only need to be installed and configured on a single host, typically on an edge node. Pick a host other than the DataNodes where impalad is running, because the intention is to protect against the possibility of one or more of these DataNodes becoming unavailable.
- Configure the load balancer (typically by editing a configuration file). In particular:
Set up a port that the load balancer will listen on to relay Impala requests back and forth.
See Choosing the Load-Balancing Algorithm for load balancing algorithm options.
For Kerberized clusters, follow the instructions in Special Proxy Considerations for Clusters Using Kerberos.
- If you are using Hue or JDBC-based applications, you typically set up load balancing for both ports 21000 and 21050, because these client applications connect through port 21050 while the impala-shell command connects through port 21000. See Ports Used by Impala for when to use port 21000, 21050, or another value depending on what type of connections you are load balancing.
- Run the load-balancing proxy server, pointing it at the configuration file that you set up.
- On systems managed by Cloudera Manager, on the page Impala Daemons Load Balancer field. Specify the address of the load balancer in host:port format. This setting lets Cloudera Manager route all appropriate Impala-related operations through the proxy server. , specify a value for the
- For any scripts, jobs, or configuration settings for applications that formerly connected to a specific datanode to run Impala SQL statements, change the connection information (such as the -i option in impala-shell) to point to the load balancer instead.
Choosing the Load-Balancing Algorithm
Load-balancing software offers a number of algorithms to distribute requests. Each algorithm has its own characteristics that make it suitable in some situations but not others.
Connects sessions to the coordinator with the fewest connections, to balance the load evenly. Typically used for workloads consisting of many independent, short-running queries. In configurations with only a few client machines, this setting can avoid having all requests go to only a small set of coordinators.
- Recommended for Impala with F5.
- Source IP Persistence
- Sessions from the same IP address always go to the same coordinator. A good choice for Impala workloads containing a mix of queries and DDL statements, such as CREATE TABLE and ALTER TABLE. Because the metadata changes from a DDL statement take time to propagate across the cluster, prefer to use the Source IP Persistence algorithm in this case. If you are unable to choose Source IP Persistence, run the DDL and subsequent queries that depend on the results of the DDL through the same session, for example by running impala-shell -f script_file to submit several statements through a single session.
- Required for setting up high availability with Hue. See Configure Hive and Impala for High Availability for configuring high availability with Hue.
- Distributes connections to all coordinator nodes. Typically not recommended for Impala.
You might need to perform benchmarks and load testing to determine which setting is optimal for your use case. Always set up using two load-balancing algorithms: Source IP Persistence for Hue and Leastconn for others.
Special Proxy Considerations for Clusters Using Kerberos
In a cluster using Kerberos, applications check host credentials to verify that the host they are connecting to is the same one that is actually processing the request, to prevent man-in-the-middle attacks.
Once you enable a proxy server in a Kerberized cluster, users will not be able to connect to individual impala daemons directly from impala-shell.
To clarify that the load-balancing proxy server is legitimate, perform these extra Kerberos setup steps:
- This section assumes you are starting with a Kerberos-enabled cluster. See Enabling Kerberos Authentication for Impala for instructions for setting up Impala with Kerberos. See the CDH Security Guide for general steps to set up Kerberos.
- Choose the host you will use for the proxy server. Based on the Kerberos setup procedure, it should already have an entry impala/proxy_host@realm in its keytab. If not, go back over the initial Kerberos configuration steps for the keytab on each host running the impalad daemon.
- For a cluster managed by Cloudera Manager (5.1 or higher), fill in the Impala configuration setting Impala Daemons Load Balancer with the appropriate host:port combination. Then restart the Impala service. For systems using a recent level of Cloudera Manager, this is all the configuration you need; you can skip the remaining steps in this procedure.
- On systems not managed by Cloudera Manager, or systems using Cloudera Manager earlier than 5.1:
- Copy the keytab file from the proxy host to all other hosts in the cluster that run the impalad daemon. (For optimal performance, impalad should be running on all DataNodes in the cluster.) Put the keytab file in a secure location on each of these other hosts.
- Add an entry impala/actual_hostname@realm to the keytab on each host running the impalad daemon.
- For each impalad node, merge the existing keytab with the proxy’s keytab using ktutil, producing a new keytab file. For example:
$ ktutil ktutil: read_kt proxy.keytab ktutil: read_kt impala.keytab ktutil: write_kt proxy_impala.keytab ktutil: quit
- Make sure that the impala user has permission to read this merged keytab file.
- Change some configuration settings for each host in the cluster that participates in the load balancing. Follow the appropriate steps depending on whether you use Cloudera Manager or
- In the impalad option definition, or the advanced configuration snippet, add:
--principal=impala/proxy_host@realm --be_principal=impala/actual_host@realm --keytab_file=path_to_merged_keytab
- On a cluster managed by Cloudera Manager, create a role group to set the configuration values from the preceding step on a per-host basis.
- On a cluster not managed by Cloudera Manager, see Modifying Impala Startup Options for the procedure to modify the startup options.
- In the impalad option definition, or the advanced configuration snippet, add:
- Restart Impala to make the changes take effect. Follow the appropriate steps depending on whether you use Cloudera Manager or not:
- On a cluster managed by Cloudera Manager, restart the Impala service.
- On a cluster not managed by Cloudera Manager, restart the impalad daemons on all hosts in the cluster, as well as the statestored and catalogd daemons.
Special Proxy Considerations for TLS/SSL Enabled Clusters
When TLS/SSL is enabled for Impala, the client application, whether impala-shell, Hue, or something else, expects the certificate common name (CN) to match the hostname that it is connected to. With no load balancing proxy server, the hostname and certificate CN are both that of the impalad instance. However, with a proxy server, the certificate presented by the impalad instance does not match the load balancing proxy server hostname. If you try to load-balance a TLS/SSL-enabled Impala installation without additional configuration, you see a certificate mismatch error when a client attempts to connect to the load balancing proxy host.
If you plan to use Auto-TLS, your load balancer must perform TLS/SSL re-establishment or TLS/SSL offload.
You can configure a proxy server in several ways to load balance TLS/SSL enabled Impala:
- TLS/SSL Bridging
- In this configuration, the proxy server presents a TLS/SSL certificate to the client, decrypts the client request, then re-encrypts the request before sending it to the backend impalad. The client and server certificates can be managed separately. The request or resulting payload is encrypted in transit at all times.
- TLS/SSL Passthrough
- In this configuration, traffic passes through to the backend impalad instance with no interaction from the load balancing proxy server. Traffic is still encrypted end-to-end.
- The same server certificate, utilizing either wildcard or Subject Alternate Name (SAN), must be installed on each impalad instance.
- TLS/SSL Offload
- In this configuration, all traffic is decrypted on the load balancing proxy server, and traffic between the backend impalad instances is unencrypted. This configuration presumes that cluster hosts reside on a trusted network and only external client-facing communication need to be encrypted in-transit.
If you plan to use Auto-TLS, your load balancer must perform TLS/SSL bridging or TLS/SSL offload.
Refer to your load balancer documentation for the steps to set up Impala and the load balancer using one of the options above.
For information specifically about using Impala with the F5 BIG-IP load balancer with TLS/SSL enabled, see Impala HA with F5 BIG-IP.
Example of Configuring HAProxy Load Balancer for Impala
If you are not already using a load-balancing proxy, you can experiment with HAProxy a free, open source load balancer.
This example shows how you might install and configure that load balancer on a Red Hat Enterprise Linux system.
Install the load balancer: yum install haproxy
Set up the configuration file: /etc/haproxy/haproxy.cfg. See the following section for a sample configuration file.
Run the load balancer (on a single host, preferably one not running impalad):
/usr/sbin/haproxy –f /etc/haproxy/haproxy.cfg
In impala-shell, JDBC applications, or ODBC applications, connect to the listener port of the proxy host, rather than port 21000 or 21050 on a host actually running impalad. The sample configuration file sets haproxy to listen on port 25003, therefore you would send all requests to haproxy_host:25003.
This is the sample haproxy.cfg used in this example:
global # To have these messages end up in /var/log/haproxy.log you will # need to: # # 1) configure syslog to accept network log events. This is done # by adding the '-r' option to the SYSLOGD_OPTIONS in # /etc/sysconfig/syslog # # 2) configure local2 events to go to the /var/log/haproxy.log # file. A line like the following can be added to # /etc/sysconfig/syslog # # local2.* /var/log/haproxy.log # log 127.0.0.1 local0 log 127.0.0.1 local1 notice chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon # turn on stats unix socket #stats socket /var/lib/haproxy/stats #--------------------------------------------------------------------- # common defaults that all the 'listen' and 'backend' sections will # use if not designated in their block # # You might need to adjust timing values to prevent timeouts. # # The timeout values should be dependant on how you use the cluster # and how long your queries run. #--------------------------------------------------------------------- defaults mode http log global option httplog option dontlognull option http-server-close option forwardfor except 127.0.0.0/8 option redispatch retries 3 maxconn 3000 timeout connect 5000 timeout client 3600s timeout server 3600s # # This sets up the admin page for HA Proxy at port 25002. # listen stats :25002 balance mode http stats enable stats auth username:password # This is the setup for Impala. Impala client connect to load_balancer_host:25003. # HAProxy will balance connections among the list of servers listed below. # The list of Impalad is listening at port 21000 for beeswax (impala-shell) or original ODBC driver. # For JDBC or ODBC version 2.x driver, use port 21050 instead of 21000. listen impala :25003 mode tcp option tcplog balance leastconn server symbolic_name_1 impala-host-1.example.com:21000 check server symbolic_name_2 impala-host-2.example.com:21000 check server symbolic_name_3 impala-host-3.example.com:21000 check server symbolic_name_4 impala-host-4.example.com:21000 check # Setup for Hue or other JDBC-enabled applications. # In particular, Hue requires sticky sessions. # The application connects to load_balancer_host:21051, and HAProxy balances # connections to the associated hosts, where Impala listens for JDBC # requests on port 21050. listen impalajdbc :21051 mode tcp option tcplog balance source server symbolic_name_5 impala-host-1.example.com:21050 check server symbolic_name_6 impala-host-2.example.com:21050 check server symbolic_name_7 impala-host-3.example.com:21050 check server symbolic_name_8 impala-host-4.example.com:21050 check