Install DPDK

Install the required dependencies.

yum -y install "@Development tools"
yum -y install pciutils net-tools glib2 glib2-devel git
yum -y install kernel kernel-devel kernel-headers

Decide where DPDK will be installed.
```
export DPDK_HOME=/usr/local/dpdk/
```

Download, build, and install DPDK.

wget http://fast.dpdk.org/rel/dpdk-16.11.1.tar.xz -O - | tar -xJ
cd dpdk-stable-16.11.1/
make config install T=x86_64-native-linuxapp-gcc DESTDIR=$DPDK_HOME

Find the PCI address of the ethernet device that you plan on using to capture network packets. In the following example we plan on binding enp9s0f0 which has a PCI address of 09:00.0.
```
$ lspci | grep "VIC Ethernet"
09:00.0 Ethernet controller: Cisco Systems Inc VIC Ethernet NIC (rev a2)
0a:00.0 Ethernet controller: Cisco Systems Inc VIC Ethernet NIC (rev a2)
```
Bind the device. Replace the device name and PCI address with what is appropriate for your environment.
```
ifdown enp9s0f0
modprobe uio_pci_generic
$DPDK_HOME/sbin/dpdk-devbind --bind=uio_pci_generic "09:00.0"
```

Ensure that the device was bound. It should be shown as a 'network device using DPDK-compatible driver.'

$ dpdk-devbind --status
Network devices using DPDK-compatible driver
============================================
0000:09:00.0 'VIC Ethernet NIC' drv=uio_pci_generic unused=enic
Network devices using kernel driver
===================================
0000:01:00.0 'I350 Gigabit Network Connection' if=eno1 drv=igb unused=uio_pci_generic

​Install DPDK

Install DPDK