May 5, 2023

This release of the Cloudera Data Warehouse (CDW) service on CDP Public Cloud has the following known issues:

New known Issues in this release

TSB 2023-684: Automatic metadata synchronization across multiple Impala Virtual Warehouses (in CDW Public Cloud) may encounter an exception: The Cloudera Data Warehouse (CDW) Public Cloud 2023.0.14.0 (DWX-1.6.3) version incorporated a feature for performing automatic metadata synchronization across multiple Apache Impala (Impala) Virtual Warehouses. The feature is enabled by default, and relies on the Hive MetaStore events. When a certain sequence of Data Definition Language (DDL) SQL commands are executed as described below, users may encounter a java.lang.NullPointerException (NPE). The exception causes the event processor to stop processing other metadata operations.
If a CREATE TABLE command (not CREATE TABLE AS SELECT) is followed immediately (approximately within 1 second interval) by INVALIDATE METADATA or REFRESH TABLE command on the same table (either on the same Virtual Warehouse or on a different one), there is a possibility that the second command will not find the table in the catalog cache of a peer Virtual Warehouse and generate an NPE.
Knowledge article: For the latest update on this issue see the corresponding Knowledge article: TSB 2023-684: Automatic metadata synchronization across multiple Impala Virtual Warehouses (in CDW Public Cloud) may encounter an exception

Enabling a private CDW environment in Azure Kubernetes Service is unstable: Cloudera rolled back the General Availability (GA) status and support for deploying a private CDW environment in Azure using AKS until a solution for the issue is available.
When working together with Microsoft Azure (Azure), a networking issue has been identified at Azure Software Definition Layer (SDN) that impacts the use of CDW private environments while using the Azure Kubernetes Service (AKS). This issue is highly unpredictable and may cause timeouts during Cloudera Data Warehouse (CDW) environment activation, Virtual Warehouse creation, Virtual Warehouse modification, and/or during start and stop operations in CDW.; The following users are affected: CDW users on Azure who are activating a private CDW environment by selecting the Private CDW option on the User Interface (UI) or using CDP Command Line Interface (CLI) enablePrivateAks option for the dw sub-command create-cluster operation within the --aws-options group.; Activation can fail with a timeout issue, and other operation related actions may be interrupted.

Certain CDW versions cannot upgrade to EKS 1.22: AWS environments activated in version 1.4.1-b86 (released June, 22, 2022) or earlier are not supported for upgrade to EKS 1.22 due to incompatibility of some components with EKS 1.22. To determine the activation version your pre-existing environment, in the Data Warehouse service, expand Environments. In Environments, search for and locate the environment that you want to view. Click Edit. In Environment Details, you see the CDW version.

DWX-15473 Reactivating the AWS environment in CDW fails

When activating the AWS environment in CDW, the usage monitor can fail due to a problem connecting to prometheus. The connection problem can be caused by a restrictive AWS account policy. The follow error message occurs:

User: arn:aws:sts::OBFUSCATED:assumed-role/env-OBFUSCATED-dwx-stack-NodeInstanceRole-OBFUSCATED/i-OBFUSCATED is not authorized to perform: elasticfilesystem:TagResource on the specified resource

Workaround: After reactivating the CDW Environment, navigate to associated Cloudformation template for CDW, click Resources. Select NodeInstanceRole, and then select efs inline policy. Replace the JSON policy with the policy on the kubernetes-sigs github site.

DWX-15395 Hive compaction fails in Azure

When RAZ is enabled in Cloudera Data Warehouse Azure environment, Hive compaction fails and returns an error message something like this:

ErrorMessage = FAILED: HiveAccessControlException Permission denied: user [ed64e526-a445-4945-9ed6-2eaf9560ff08] does not have [READ] privilege on [[abfs:

Workaround:

1) In the CDW UI, in Overview, select a Hive Virtual Warehouse, and click Edit.

2) In Details, click CONFIGURATIONS > HiveServer2. 3) Select hive-site from the drop-down list, and search for metastore.compactor.run.as.user.

4) If the metastore.compactor.run.as.user key does not appear, click + and add it.

5) In Value, enter your Microsoft managed identity, and save the change.

Restart the Virtual Warehouse.

DWX-15246 Missing entries in subnet selection during CDW environment activation: The subnet selection during environment activation might not display any, or all, of the subnets registered in the environment.; Workaround: Carefully review the list of subnets you can select during activation. If subnets you want are not visible, enter the subnet-ids manually into the list, and then activate the environment.

DWX-15214 DWX-15176 Hue frontend may become stuck in CrashLoopBackoff on CDW running on Azure

The Hue frontend for Apache Impala (Impala) and Apache Hive (Hive) Virtual Warehouses created in Cloudera Data Warehouse (CDW) can be stuck in a CrashLoopBackoff state on Microsoft Azure (Azure) platform, making it impossible to reach the Virtual Warehouse through Hue. In this case, the following error message is displayed:

kubelet Error: failed to create containerd task: failed to create shim task: OCI runtime create failed: runc create failed: unable to start container process: exec: “run_httpd.sh”: cannot run executable found relative to current directory: unknown

This issue affects all CDW releases before 1.6.3 (released May 5, 2023)running on CDP Public Cloud on Azure.

The following users are affected:

CDW Azure users using Hue in Impala and Hive Virtual Warehouses in environments earlier than version 1.6.3 if they upgrade the node image
CDW Azure users creating a new CDW environment with a Hue version earlier than 2023.0.14.0 (released May 5, 2023) during Hive or Impala Virtual Warehouse creation

Workaround: Upgrade the Virtual Warehouses to 1.6.3 and choose Hue version 2023.0.14.0.

Do not choose Hue versions older than 2023.0.14.0 when creating a Virtual Warehouse in environments of version 1.6.3.

DWX-15016 Impala query failure when using Catalog high availability (HA): Impala queries could fail with InconsistentMetadataFetchException when using HA feature in CDW. This happens when leader election failover for Impala Catalog Service happens due to a transient network error.; Workaround: Disable Catalog HA. In CDW, edit your Virtual Warehouse, and turn off Enable Impala Catalog Server HA.

DWX-14452 Parquet table query might fail

Querying a table stored in Parquet from Hive might fail with the following exception message: java.lang.RuntimeException: java.lang.StackOverflowError. This problem can occur when the IN predicate has 243 values or more, and a small stack (-Xss = 256k) is configured for Hive in CDW.

Workaround: Change the value of the Xss in the JVM args to use the default value (1Mb) as follows: Select Edit from the Options menu of your Virtual Warehouse. Click Configurations > Query Executor > and select env.

In the third line shown below, change the value of LLAP_DAEMON_OPTS from -Xss256k to -Xss1M, and then click Apply Changes:

FROM:

-Dorg.wildfly.openssl.path=/usr/lib64 -Dzookeeper.sasl.client=false -Djdk.tls.disabledAlgorithms=SSLv3,GCM -Dhttp.maxConnections=12 -Xms24G -Xmx48G -Xss256k ...

TO:

... -Xss1M ...

DWX-15090: CSRF error intermittently seen in the Hue Job Browser

You may intermittently see the “403 - CSRF” error on the Hue web interface as well as in the Hue logs after running Hive queries from Hue.

Reload the browser or start a new Hue session.

DWX-15171 Error after disabling SSO.: Disabling SSO for Impala Virtual Warehouse can cause an error.; To reproduce this issue 1) Create an Impala Virtual Warehouse having SSO enabled. 2) Edit the Virtual Warehouse to disable SSO.
The coordinator crashes.

DWX-15151 Runtime error after activating an environment

Activating an environment having a public load balancer can cause a 2083 runtime error

To reproduce this problem 1) Create a data lake. 2) Activate an enviroment having a public load balancer deployment type and subnets in three different availability zones. The following error can occur:

RuntimeErr with ErrCode=2083 (cause: 0 'coredns' replica(s) are ready) Error Code : undefined

DWX-15145 Environment validation popup error after activating an environment: Activating an environment having a public load balancer can cause an environment validatation popup error.; To reproduce this problem 1) Create a data lake. 2) Activate an enviroment having a public load balancer deployment type and subnets in three different availability zones. A environment validation popup can occur even through subnets are in different availability zones. Several differnt popups can occur, including the following one:

DWX-15144 Virtual Warehouse naming restrictions: You cannot create a Virtual Warehouse having the same name as another Virtual Warehouse even if the like-named Virtual Warehouses are in different environments. You can create a Database Catalog having the same name as another Database Catalog if the Database Catalogs are in different environments.

DWX-15115 Error displayed after clicking on hyperlink below Hue table browser: In Hue, below the table browser, clicking the hyperlink to a location causes an HTTP 500 error because the file browser is not enabled for environments that are not Ranger authorized (RAZ).

DWX-15114 Incorrect Database Catalog status indication incorrect after an upgrade: After a Database Catalog upgrade, if the Databus producer crashes, the default Database Catalog does not indicate the error. The Database Catalog status instead indicates "running". After a Database Catalog upgrade, if the Databus producer crashes, a non-default (custom) Database Catalog, indicates the correct error status.

DWX-15112 Enterprise Data Warehouse database configuration problems after a Helm-related rollback: If a Helm rollback fails due to an incorrect Enterprise Data Warehouse database configuration, the Virtual Warehouse and Database Catalog roll back to a previous configuration. The incorrect Enterprise Data Warehouse configuration persists, and can affect subsequent edit, upgrade, and rebuild operations on the rolled-back Virtual Warehouse or Database Catalog.

DWX-15110 Misaligned dialog in the UI: The Create Virtual Warehouse dialog is not aligned properly when no Virtual Warehouses are running.

DWX-15064 Hive Virtual Warehouse stops but appears healthy: Due to an istio-proxy problem, the query coordinator can unexpectedly enter a not ready state instead of the expected error-state. Subsequently, the Hive Virtual Warehouse stops when reaching the autosuspend timeout without indicating a problem.

DWX-15014 Loading airports table in demo data fails: This issue occurs only when using a non-default Database Catalog. A invalid path error message occurs when using the load command to load the demo data airports table in Iceberg, ORC, or Parquet format.

DWX-14992 Cosmetic UI problem with Enable DAS link: In Azure environments, no gap appears between the previous text box and Enable DAS.

DWX-14970 Cosmetic UI problem with Virtual Warehouse start label: The start labels of the Impala Virtual Warehouse and Hive Virtual Warehouse are inconsistent with regard to upper- and lower-case.

DWX-14968 Connection termination error in Impala queries tab after Hue inactivity: To reproduce the problem: 1) In the Impala job browser, navigate to Impala queries. 2) Wait for a few minutes.; After a few minutes of inactivity, the follow error is displayed:; Workaround: Refresh the page, or alternatively start a new session.

DWX-14927 Hue fails to list Iceberg snapshots

Hue does not recognize the Iceberg history queries from Hive to list table snapshots. For example, Hue indicates an error at the . before history when you run the following query.

select * from <db_name>.<table_name>.history

Delay in listing queries in Impala Queries in the Job browser: Listing an Impala query in the Job browser can take an inordinate amount of time.

DWX-14923 After JWT authentication, ttempting to connect the Impyla client using a user name or password should cause an error: Using a JWT token, you can connect to a Virtual Warehouse as the user who generated the token.; If you connect with the JWT token, and then pass a user name or password from Impyla to the Virtual Warehouse, the connection arguments are silently ignored. Such an action should indicate that it is illegal to specify user or password when using JWT authentication.

DWX-14874 No indication that there are no Virtual Warehouses running: When no Data Visualization instance is running, you see "Currently no environments connected to Data Visualization cluster". The same indicator should be displayed when no Virtual Warehouses are running.

DWX-14610 Upgrade icon indicates the Database Catalog is the latest version, but might be incorrect for a few seconds: The cluster fetches data regularly in particular time intervals, or when an action is triggered. Inbetween this time interval, which is very brief, the cluster might not be updated, but will be refreshed in a few seconds.
CDPD-54376: Clicking the home button on the File Browser page redirects to HDFS user directory: When you are previewing a file on any supported filesystem, such as S3 or ABFS, and you click on the Home button, you are redirected to the HDFS user home directory instead of the user home directory on the said filesystem.; None.

Carried over from the previous release: General

DWX-13103 Cloudera Data Warehouse environment activation problem: When CDW environments are activated, a race condition can occur between the prometheus pod and istiod pod. The prometheus pod can be set up without an istio-proxy container, causing communication failures to/from prometheus to any other pods in the Kubernetes cluster. Data Warehouse prometheus-related functionalities, such as autoscaling, stop working. Grafana dashboards, which get metrics from prometheus, are not populated.; Workaround: Restart the prometheus pod so that it gets the istio-proxy container.

DWX-6619 Browser auto-close not working on some browsers after token-Based authentication for accessing CDW: The Firefox and Edge browser window does not close automatically after successful authentication.
DWX-9774 Database Catalog or Virtual Warehouse image version problem: Background: In Cloudera Data Warehouse 2021.0.3-b27 - 2021.0.5-b36, you can choose any supported image version when you create a Database Catalog or Virtual Warehouse, assuming you have the CDW_VERSIONED_DEPLOY entitlement.; Problem: In Cloudera Data Warehouse 2021.0.6-b96, you can choose an image version other than 2021.0.6-b96 when you create a Database Catalog or Virtual Warehouse only if you use an existing environment. An existing environment is one you created in 2021.0.3-b27 - 2021.0.5-b36.; Workaround: In 2021.0.6-b96, use an environment you created before this release to choose an image version other than 2021.0.6-b96 when you create a Database Catalog or Virtual Warehouse.
DWX-5742: Upgrading multiple Hive and Impala Virtual Warehouses or Database Catalogs at the same time fails: Problem: Upgrading multiple Hive and Impala Virtual Warehouses or Database Catalogs at the same time fails.; Workaround: If you need to upgrade or create multiple Hive and Impala Virtual Warehouses or Database Catalogs, perform the upgrade or creation sequentially one at a time.

Carried over from the previous release: AWS

DWX-14409 Starting a Virtual Warehouse in an AWS environments in the Asia-Pacific Southeast region fails: When you upgrade the Virtual Warehouse in this release and start it, a timing issue causes failure.; Workaround: Continue using the previous release 1.5.1-b110 (released Nov 22, 2022). Do not upgrade to 1.6.1-b282 (released Feb 7, 2023). Delay upgrading your Virtual Warehouse until the next release of CDW.

AWS availability zone inventory issue

In this release, you can select a preferred availability zone when you create a Virtual Warehouse; however, AWS might not be able to provide enough compute instances of the type that Cloudera Data Warehouse needs.

Workaround: If you experience this AWS issue, try recreating the Virtual Warehouse and choosing a different availability zone.

DWX-7613: CloudFormation stack creation using AWS CLI broken for CDW Reduced Permissions Mode

Problem: If you use the AWS CLI to create a CloudFormation stack to activate an AWS environment for use in Reduced Permissions Mode, it fails and returns the following error:

An error occurred (ValidationError) when calling the CreateStack
       operation: Parameters: [SdxDDBTableName] must have values

The default value of SdxDDBTableName is not being set. If you create the CloudFormation stack using the AWS Console, there is no problem.

Workaround: If you must use the AWS CLI, edit the CloudFormation stack template file as follows:

SdxDDBTableName:
       Description: DynamoDB table name for the SDX S3 file listings, created through S3Guard
       Type: String
       Default: " "

Then rerun the CloudFormation stack creation command using the AWS CLI.

ENGESC-8271: Helm 2 to Helm 3 migration fails on AWS environments where the overlay network feature is in use and namespaces are stuck in a terminating state

Problem: While using the overlay network feature for AWS environments and after attempting to migrate an AWS environment from Helm 2 to Helm 3, the migration process fails.

Workaround: Run the following kubectl command to determine whether you have any namespaces stuck in a terminating state:

kubectl get ns

Then contact Cloudera Technical Support to report and get help on this issue.

DWX-6970: Tags do not get applied in existing CDW environments

Problem: You may see the following error while trying to apply tags to Virtual Warehouses in an existing CDW environment:

An error occurred (UnauthorizedOperation)
       when calling the CreateTags operation: You are not authorized to perform this
       operation

and Compute node tagging was unsuccessful. This happens because the ec2:CreateTags privilege is missing from your AWS cluster-autoscaler inline policy for the NodeInstanceRole role.

Workaround: Add the ec2:CreateTags privilege to the cluster-autoscaler inline policy as follows:

Log into the AWS IAM console at https://console.aws.amazon.com/iam/.
In the navigation panel, choose Roles.
Search the list of roles for NodeInstanceRole.
Click Permissions.
Select cluster-autoscaler and click Edit policy.

Add the ec2:CreateTags line in the Actions section after the ec2:DescribeLaunchTemplateVersions line as shown:

"Version": "2012-10-17",
          "Statement": [
          {
          "Action": [
          "autoscaling:DescribeAutoScalingGroups",
          "autoscaling:DescribeAutoScalingInstances",
          "autoscaling:DescribeTags",
          "autoscaling:DescribeLaunchConfigurations",
          "autoscaling:SetDesiredCapacity",
          "autoscaling:TerminateInstanceInAutoScalingGroup",
          "ec2:DescribeLaunchTemplateVersions",
          "ec2:CreateTags"
          ],

Save changes.

Carried over from the previous release: Azure

Workloads from earlier CDW versions cannot be deployed on new Azure environments: Because new environments are provisioned automatically to use Azure Kubernetes Service (AKS) 1.22, deprecated APIs used in workloads of earlier versions are not supported in this version 2022.0.9.0-120 (released August 4, 2022). This issue affects you only if you have the CDW_VERSIONED_DEPLOY entitlement.; Workaround: Create new workloads. Workloads in Database Catalogs, Hive, Impala, Hue, Data Visualization, and are incompatible with AKS 1.22.

Incorrect diagnostic bundle location

Problem:The path you see to the diagnostic bundle is wrong when you create a Virtual Warehouse, collect a diagnostic bundle of log files for troubleshooting, and click

Edit > Diagnostic Bundle. Your storage account name is missing from the beginning of the path.

Workaround:To find your diagnostic bundle, add your storage account name to the beginning of the path, for example:

my-storage-account-name/log-files/clusters/my-env/my-warehouse-xx-yy/warehouse/debug-artifacts/hive/compute-zz-mvvf/compute-zz-mvvf-0926210111-0927090111-01234.zip

To get your storage account name, in Cloudera Management Console, click Environments, select your environment, and scroll down to Logs Storage and Audits. The first part of the path is your storage account name.

Changed environment credentials not propagated to AKS

Problem: When you change the credentials of a running cloud environment using the Management Console, the changes are not automatically propagated to the corresponding active Cloudera Data Warehouse (CDW) environment. As a result, the Azure Kubernetes Service (AKS) uses old credentials and may not function as expected resulting in inaccessible Hive or Impala Virtual Warehouses.

Workaround: To resolve this issue, you must manually synchronize the changes with the CDW AKS resources. To synchronize the updated credentials, see Update AKS cluster with new service principal credentials in the Azure product documentation.

Carried over from the previous release: Database Catalog

Non-default Database Catalogs created with several earlier CDW versions fails

This issue affects you only if you meet the following conditions:

You have a versioned CDW deployment and the multi default DBC entitlement.
You are using this release of CDW version 2022.0.9.0-120 (released August 4, 2022).
You added Database Catalogs (not the automatically generated default Database Catalog) using either one of these CDW versions:
- 2022.0.8.0-89 (released June, 22, 2022)
- 2022-0.7.1-2 (released May 10, 2022)

Do not attempt to upgrade the Database Catalog you created with these earlier releases. The Database Catalog will fail. Your existing Database Catalog created with the earlier release works fine with CDW Runtime. Recreating your existing Database Catalog updates CDW Runtime for 2022.0.9.0-120 (released August 4, 2022).

DWX-7349: In reduced permissions mode, default Database Catalog name does not include the environment name

Problem:

When you activate an AWS environment in reduced permissions mode, the default Database Catalog name does not include the environment name:

This does not cause collisions because each Database Catalog named "default" is associated with a different environment. For more information about reduced permissions mode, see Reduced permissions mode for AWS environments.

Workaround: None available.

DWX-6167: Maximum connections reached when creating multiple Database Catalogs

Problem:After creating 17 Database Catalogs on one AWS environment, Virtual Warehouses failed to start.

Workaround: Limit the number of Database Catalogs created on one environment to 5. This applies to both AWS and Azure environments.

Carried over from the previous release: Hive Virtual Warehouse

Diagnostic bundle download fails

After upgrading to version 1.4.3 (released September 15, 2022), downloading the diagnostic bundle for the Hive Virtual Warehouse results in an error. New environments do not have this problem. The problem is caused by missing permissions to access Kubernetes resources. Version 1.4.3 adds a requirement for the role-based access control (rbac) permissions to download the diagnostic bundle.

Workaround: Add the missing rbac permissions as follows:

1) Create the following file:

apiVersion: rbac.authorization.k8s.io/v1
       kind: ClusterRole
       metadata:
       name: diagnostic-data-generator-role-monitor
       rules:
       - apiGroups:
       - ""
       resources:
       - configmaps
       - events
       - pods
       - persistentvolumeclaims
       - nodes
       verbs:
       - get
       - list
       - apiGroups:
       - apps
       resources:
       - deployments
       - statefulsets
       verbs:
       - get
       - list
       - apiGroups:
       - "edws.cloudera.com"
       resources:
       - computes
       verbs:
       - get
       - list

2) Run the following command to apply the permissions:

kubectl apply -f <filename>

CDPD-40730 Parquet change can cause incompatibility: Parquet files written by the parquet-mr library in this version of CDW, where the schema contains a timestamp with no UTC conversion will not be compatible with older versions of Parquet readers. The effect is that the older versions will still consider these timestamps as they would require UTC conversions and will thus end up with a wrong result. You can encounter this problem only when you write Parquet-based tables using Hive, and tables have the non-default configuration hive.parquet.write.int64.timestamp=true.

DWX-5926: Cloning an existing Hive Virtual Warehouse fails

Problem: If you have an existing Hive Virtual Warehouse that you clone by selecting Clone from the drop-down menu, the cloning process fails. This does not apply to creating a new Hive Virtual Warehouse.

Workaround: Make the following configuration change to resolve this issue:

In the Hive Virtual Warehouse tile, click the edit icon. This launches the Virtual Warehouse details page.
In the details page for the Virtual Warehouse, click the Configurations tab.
Click the Hiveserver2 sub-tab.
Select hive-site from the configuration file drop-down list menu.
Search for the configuration property hive.metastore.sasl.enabled.
Set the hive.metastore.sasl.enabled configuration property to true.
note
If the hive.metastore.sasl.enabled configuration property is already set to true, delete the setting and re-enter it.
Click Apply in the upper right corner of the page to save the configuration.
Click the Actions menu and select Clone to clone the Hive Virtual Warehouse:

DWX-2690: Older versions of Beeline return SSLPeerUnverifiedException when submitting a query

Problem: When submitting queries to Virtual Warehouses that use Hive, older Beeline clients return an SSLPeerUnverifiedException error:

javax.net.ssl.SSLPeerUnverifiedException: Host name ‘ec2-18-219-32-183.us-east-2.compute.amazonaws.com’ does not
       match the certificate subject provided by the peer (CN=*.env-c25dsw.dwx.cloudera.site) (state=08S01,code=0)

Workaround: Only use Beeline clients from CDP Runtime version 7.0.1.0 or later.

Carried over from the previous release: Hue Query Editor

IMPALA-11447 Selecting certain complex types in Hue crashes Impala

Queries that have structs/arrays in the select list crash Impala if initiated by Hue.

Workaround: Do not select structs/arrays in Hue.

DWX-8460: Unable to delete, move, or rename directories within the S3 bucket from Hue

Problem: You may not be able to rename, move, or delete directories within your S3 bucket from the Hue web interface. This is because of an underlying issue, which will be fixed in a future release.

Workaround: You can move, rename, or delete a directory using the HDFS commands as follows:

SSH into your CDP environment host.
To delete a directory within your S3 bucket, run the following command:
```
hdfs dfs -rm -r [***COMPLETE-PATH-TO-S3-BUCKET***]/[***DIRECTORY-NAME***]
```

To rename a folder, create a new directory and run the following command to move files from the source directory to the target directory:

hdfs dfs -mkdir [***DIRECTORY-NAME***]

hdfs dfs -mv [***COMPLETE-PATH-TO-S3-BUCKET***]/[***SOURCE-DIRECTORY***] [***COMPLETE-PATH-TO-S3-BUCKET***]/[***TARGET-DIRECTORY***]

DWX-6674: Hue connection fails on cloned Impala Virtual Warehouses after upgrading: Problem: If you clone an Impala Virtual Warehouse from a recently upgraded Impala Virtual Warehouse, and then try to connect to Hue, the connection fails.; Workaround: Create a new Impala Virtual Warehouse and do not clone from a recently upgraded warehouse. Then the connection to Hue from the new Impala Virtual Warehouse succeeds.
DWX-5650: Hue only makes the first user a superuser for all Virtual Warehouses within a Data Catalog: Problem: Hue marks the user that logs in to Hue from a Virtual Warehouse for the first time as the Hue superuser. But if multiple Virtual Warehouses are connected to a single Data Catalog, then the first user that logs in to any one of the Virtual Warehouses within that Data Catalog is the Hue superuser.
For example, consider that a Data Catalog DC-1 has two Virtual Warehouses VW-1 and VW-2. If a user named John logs in to Hue from VW-1 first, then he becomes the Hue superuser for all the Virtual Warehouses within DC-1. At this time, if Amy logs in to Hue from VW-2, Hue does not make her a superuser within VW-2.; None.

Iceberg

DWX-14163 Limitations reading Iceberg tables in Avro file format from Impala: The Avro, Impala, and Iceberg specifications describe some limitations related to Avro, and those limitations exist in CDP. In addition to these, the DECIMAL type is not supported in this release.

DWX-14286 Loading data to Iceberg error

Using LOAD DATA INPATH from an Impala Virtual Warehouse to load data to an Iceberg table on S3/ADLS when hidden files (files that are prefixed with . or _) are in the path can lead to unexpected query failures. For example:

AnalysisException: INPATH contains unsupported LOAD format, file '
            s3a://dwx-testdata/impala/sql_test/tests/load_data_inpath/runtime_data/0690a6fa9bfb11ed920c164053429bec/load_data_test/A/impala_data/impala_alltypessmall_data/alltypessmall_parquet_iceberg/year=2009/month=1/.hiddenfileforloaddatatest
            ' has 'This' magic string.

DEX-7946 Data loss during migration of a Hive table to Iceberg

In this release, by default the table property 'external.table.purge' is set to true, which deletes the table data and metadata if you drop the table during migration from Hive to Iceberg.

Workarounds: Either one of the following workarounds prevents data loss during table migration:

Set the table property 'external.table.purge'='FALSE'.
Do not drop a table during migration from Hive to Iceberg.

DWX-13733 Timeout issue querying Iceberg tables from Hive

A timeout issue can cause the query to fail.

Workaround: Add the following configuration to hadoop-core-site for the Database Catalog and the Virtual Warehouse.

fs.s3.maxConnections=1000
fs.s3a.connection.maximum=1000

Restart the Database Catalog and Virtual Warehouse.

DWX-13062 Hive-26507 Converting a Hive table having CHAR or VARCHAR columns to Iceberg causes an exception: CHAR and VARCHAR data can be shorter than the length specified by the data type. Remaining characters are padded with spaces. Data is converted to a string in Iceberg. This process can yield incorrect results when you query the converted Iceberg table.; Workaround: Change columns from CHAR or VARCHAR to string types before converting the Hive table to Iceberg.

DWX-13276 Multiple inserts into tables having different formats can cause a deadlock.

Under the following conditions, a deadlock can occur:

You run a query to insert data into multiple tables comprised of at least one Iceberg table and at least one non-Iceberg table.
The STAT task locking feature is turned on (default = on).

Workarounds: Perform either one of the following workarounds:

Run separate queries to insert data into only one table at a time.

Turn off STAT task locking as follows:

set iceberg.hive.request-lock-on-stats-task=false;

Carried over from the previous release: Impala Virtual Warehouse

IMPALA-11045 Impala Virtual Warehouses might produce an error when querying transactional (ACID) table even after you enabled the automatic metadata refresh (version DWX 1.1.2-b2008): Problem: Impala doesn't open a transaction for select queries, so you might get a FileNotFound error after compaction even though you refreshed the metadata automatically.; Workaround: Run the INVALIDATE METADATA statement on the transactional (ACID) table to refresh the metadata. This fixes the problem until the next compaction occurs. For information about running this statement, see INVALIDATE METADATA statement.

Impala Virtual Warehouses might produce an error when querying transactional (ACID) tables (DWX 1.1.2-b1949 or earlier)

Problem: If you are querying transactional (ACID) tables with an Impala Virtual Warehouse and compaction is run on the compacting Hive Virtual Warehouse, the query might fail. The compacting process deletes files and the Impala Virtual Warehouse might not be aware of the deletion. Then when the Impala Virtual Warehouse attempts to read the deleted file, an error can occur. This situation occurs randomly.

Workaround: Run the INVALIDATE METADATA statement on the transactional (ACID) table to refresh the metadata. This fixes the problem until the next compaction occurs. For information about running this statement, see INVALIDATE METADATA statement.

Do not use the start/stop icons in Impala Virtual Warehouses version 7.2.2.0-106 or earlier

Problem: If you use the stop/start icons in Impala Virtual Warehouses version 7.2.2.0-106 or earlier, it might render the Virtual Warehouse unusable and make it necessary for you to re-create it.

Workaround: Do not use the stop/start icons in these older Virtual Warehouses. Instead, these older versions automatically suspend and resume the Impala executors depending on the absence or presence of queries, making manual start or stop unnecessary.

DWX-6674: Hue connection fails on cloned Impala Virtual Warehouses after upgrading

Problem: If you clone an Impala Virtual Warehouse from a recently upgraded Impala Virtual Warehouse, and then try to connect to Hue, the connection fails.

Workaround: Create a new Impala Virtual Warehouse and do not clone from a recently upgraded warehouse. Then the connection to Hue from the new Impala Virtual Warehouse succeeds.

DWX-5841: Virtual Warehouse endpoints are now restricted to TLS 1.2

Problem: TLS 1.0 and 1.1 are no longer considered secure, so now Virtual Warehouse endpoints must be secured with TLS 1.2 or later, and then the environment that the Virtual Warehouse uses must be reactivated in CDW. This includes both Hive and Impala Virtual Warehouses. To reactivate the environment in the CDW UI:

Deactivate the environment. See Deactivating AWS environments or Deactivating Azure environments.
Activate the environment. See Activating AWS environments or Activating Azure environments

Workaround: If environment reactivation is not possible, you can perform manual steps using the kubectl command line tool to pick up the TLS 1.2 endpoint change. Open a terminal window on a system where the kubectl command line tool is installed, log in, and run the following commands:

kubectl edit svc nginx-service -n <cluster-name>
       
       # Add the following under the metadata.annotations field
       service.beta.kubernetes.io/aws-load-balancer-ssl-negotiation-policy: "ELBSecurityPolicy-TLS-1-2-2017-01"
       
       # Save and quit the editor, and then run the following command to check your changes.
       
       kubectl get svc nginx-service -n <cluster-name> -o yaml
       
       # Make sure that the annotation you added is present.

DWX-5276: Upgrading an older version of an Impala Virtual Warehouse can result in error state

Problem: If you upgrade an older version of an Impala Virtual Warehouse (DWX 1.1.1.1-4) to the latest version, the Virtual Warehouse can get into an Updating or Error state.

Workaround: none

DWX-3914: Collect Diagnostic Bundle option does not work on older environments

The Collect Diagnostic Bundle menu option in Impala Virtual Warehouses does not work for older environments:

Data caching:

This feature is limited to 200 GB per executor, multiplied by the total number of executors.

Sessions with Impala continue to run for 15 minutes after the connection is disconnected.

When a connection to Impala is disconnected, the session continues to run for 15 minutes so the user or client can reconnect to the same session again by presenting the session_token. After 15 minutes, the client must re-authenticate to Impala to establish a new connection.