Setting Cloudera Director Properties

This topic lists the configuration properties recognized by Cloudera Director. Upon installation, these properties are pre-configured with reasonable default values, and you can run either client or server versions without specifying any of them. However, you might want to customize one or more properties, depending on your environment and the Cloudera Director features you want to use.

Setting Configuration Properties

The Cloudera Director command line provides the simplest way to specify a configuration property. For example:

./bin/cloudera-director bootstrap aws.simple.conf \
--lp.pipeline.retry.maxWaitBetweenAttempts=60

./bin/cloudera-director-server --lp.security.disabled=false

For users upgrading Cloudera Director

If you modified the application.properties file in Cloudera Director, the result of an upgrade depends on the version of Linux you are using:

RHEL and CentOS - When new properties are introduced in Cloudera Director, they are added to application.properties.rpmnew. The original application.properties file functions as before and is not overwritten with the new Cloudera Director version properties. You do not need to copy the new properties from application.properties.rpmnew to the old application.properties file.
Ubuntu - The modified Cloudera Director application.properties file is backed up to a file named application.properties.dpkg-old. The original application.properties file is then overwritten by the new application.properties file containing new Cloudera Director properties. After upgrading, copy your changes from application.properties.dpkg-old to the new application.properties file.

All the new properties are commented, and they all use valid defaults, so you do not necessarily need to merge the two properties files. But you must merge the two files if you want to modify one of the newly introduced properties.

See

Property Types

Type	Description
boolean	Either true or false
char	Single character
directory	Valid directory path
enum	Fixed set of string values; a list of each enumeration’s values is provided following the main property table below
enum list	Comma-separated list of enums
file	Valid file path
int	Integer (32-bit)
long	Long integer (64-bit)
string	Ordinary character string
time unit	Enumeration of time units: DAYS, HOURS, MICROSECONDS, MILLISECONDS, MINUTES, NANOSECONDS, SECONDS

Properties

Property	Description
lp.access.logging.config.file	File for Cloudera Director server access log. Type: string Default: none; must be set if `lp.access.logging.enabled` is `true`.
lp.access.logging.enabled	Enable Cloudera Director server access logging. Type: boolean Default: false
lp.bootstrap.agents. maxNumberOfInstallAttempts	Maximum number of times to retry installing Cloudera Manager agent. Use -1 for unlimited. Type: int Default: -1
lp.bootstrap.parallelBatchSize	Parallelism for allocating and setting up cluster instances when bootstrapping a cluster. Type: int Default: 20
lp.bootstrap.parcels. distributeMaxConcurrentUploads	Maximum concurrent uploads of parcels across cluster. Type: int Default: 5
lp.bootstrap.parcels. distributeRateLimitKBs	Maximum rate of parcel upload, in KB/s. Type: int Default: 256000
lp.bootstrap.resume.policy	Action to take when resuming a previous bootstrap. Use RESTART to start from scratch. Use RESUME to resume from last known state. Use INTERACTIVE to prompt to ask. Type: enum Valid values: RESTART \| RESUME \| INTERACTIVE Default: INTERACTIVE
lp.cache.health.expirationMultiplier	Multiplier applied to polling rate to find health cache expiration duration; negative = disable health polling. Type: int Default: 2
lp.cache.health. numberOfCacheExecutionThreads	Number of threads used to poll for service and cluster health. Type: int Default: 5
lp.cache.health. pollingRateInMilliseconds	Rate at which service and cluster health is polled, in milliseconds. Type: long Default: 30000
lp.cleanup.databases. intervalBetweenAttemptsInMs	Wait time between attempts to destroy external databases, in milliseconds. Type: long Default: 60000
lp.cleanup.databases. maxNumberOfDeleteAttempts	Maximum number of times to retry destroying external databases; -1 = unlimited. Type: int Default: 5
lp.cloud.databaseServers. allocate.timeoutInMinutes	Time to wait for allocated database server instances to begin running to have ports available. Type: int Default: 20
lp.cloud.databaseServers. destroy.timeoutInMinutes	Time to wait for terminated database server instances to stop running to have ports no longer available. Type: int Default: 20
lp.cloud.instances.allocate. numberOfRetriesOnConnectionError	Number of times to retry connecting to newly allocated instances over SSH. Type: int Default: 3
lp.cloud.instances.allocate. parallelBatchSize	Parallelism for waiting for SSH to become available on newly allocated instances. Type: int Default: 20
lp.cloud.instances.allocate. timeBetweenConnectionRetriesInSeconds	Time to wait between attempts to connect to newly allocated instances over SSH. Type: int Default: 1
lp.cloud.instances.allocate. timeoutInMinutes	Time to wait for allocated instances to begin running to have SSH ports available. Type: int Default: 20
lp.cloud.instances.terminate. timeoutInMinutes	Time to wait for terminated instances to stop running. Type: int Default: 20
lp.debug. collectDiagnosticDataOnFailure	Collect Cloudera Manager diagnostic data on unrecoverable bootstrap failure. Type: boolean Default: true
lp.debug. createDiagnosticDataDownloadDirectory	Create the download directory for Cloudera Manager diagnostic data if it does not already exist. Type: boolean Default: true
lp.debug. diagnosticDataDownloadDirectory	Destination directory for downloaded Cloudera Manager diagnostic data. Type: string Default: /tmp
lp.debug.downloadDiagnosticData	Download Cloudera Manager diagnostic data once it has been collected. Type: boolean Default: true
lp.debug. dumpClouderaManagerLogsOnFailure	Dump Cloudera Manager log entries into the Director logs on unrecoverable bootstrap failure. Type: boolean Default: false
lp.debug. dumpClusterLogsOnFailure	Dump cluster service logs, standard output, or standard error into the Cloudera Director logs on unrecoverable bootstrap failure. Type: boolean Default: false
lp.encryption.twoWayCipher	Cipher used to encrypt data. Possible values: `desede` - Triple DES `passthrough` - No encryption `transitional` - Changing encryption Type: string Default: desede
lp.encryption.twoWayCipherConfig	The configuration string for the chosen cipher. Type: string Default: `ZGVmYXVsdGRpcmVjdG9yZGVzZWRla2V5` Important: Cloudera recommends that you configure a different triple DES key. A warning appears in the server log if the default key is detected.
lp.metrics.durationUnits	Time units for reporting durations in metrics. Type: time unit Valid values: DAYS \| HOURS \| MICROSECONDS \| MILLISECONDS \| MINUTES \| NANOSECONDS \| SECONDS Default: MILLISECONDS
lp.metrics.enabled	Enable metrics gathering Type: boolean Default: false
lp.metrics.location	Directory for storing metrics reports. Type: directory Default: $LOG_DIR/metrics
lp.metrics.rateUnits	Time units for reporting rates in metrics. Type: time unit Valid values: DAYS \| HOURS \| MICROSECONDS \| MILLISECONDS \| MINUTES \| NANOSECONDS \| SECONDS Default: SECONDS
lp.metrics.reportingRate	Frequency of metrics reporting, in minutes. Type: long Default: 1
lp.pipeline.retry. maxNumberOfAttempts	Maximum number of times to retry failed pipeline jobs; -1 = unlimited. Type: int Default: -1 for client, 16 for server
lp.pipeline.retry. maxWaitBetweenAttempts	Maximum wait time between pipeline retry attempts, in seconds. Type: int Default: 45
lp.proxy.http.domain	NT domain for HTTP proxy authentication; none = no domain. Type: string Default: none
lp.proxy.http.host	HTTP proxy host; none = no proxy. Type: string Default: none
lp.proxy.http.password	HTTP proxy password; none = no password. Type: string Default: none
lp.proxy.http.port	HTTP proxy port; -1 = no proxy. Type: int Default: -1
lp.proxy.http.preemptiveBasicProxyAuth	Whether to preemptively authenticate to HTTP proxy. Type: boolean Default: false
lp.proxy.http.username	HTTP proxy username; none = no username. Type: string Default: none
lp.proxy.http.workstation	Originating workstation in NT domain for HTTP proxy authentication; none = no workstation. Type: string Default: none
lp.remote.hostAndPort	Host and port of remote Cloudera Director server. Type: string Default: localhost:7189
lp.remote.password	Remote Cloudera Director server password (client only). Type: string Default:
lp.remote.username	Remote Cloudera Director server username (client only). Type: string Default: none
lp.remote.terminate.assumeYes	Whether to skip prompting user to confirm termination for client terminate-remote command. Type: boolean Default: false
lp.security.enabled	Whether to enable Cloudera Director server security (server only). Type: boolean Default: true
lp.security.userSource	Source for user account information (server only). Type: enum Default: internal
lp.ssh.connectTimeoutInSeconds	SSH connection timeout. Type: int Default: 30
lp.ssh.heartbeatIntervalInSeconds	SSH heartbeat interval. Type: int Default: 45
lp.ssh.readTimeoutInSeconds	SSH read timeout. Type: int Default: 30
lp.task.evictionRate	Rate of execution of database eviction, in milliseconds. Type: long Default: 600000
lp.terminate.assumeYes	Whether to skip prompting user to confirm termination for client terminate command. Type: boolean Default: false
lp.terminate.deployment. clouderaManagerServerStopWaitTimeInMs	Time to wait for Cloudera Manager to stop when terminating a deployment, in milliseconds. Type: long Default: 300000
lp.terminate.deployment. timeBetweenConnectionRetriesInMs	Time to wait between checks for whether Cloudera Manager has been terminated. Type: int Default: 10000
lp.update.parallelBatchSize	Parallelism for allocating and setting up cluster instances when bootstrapping a cluster. Type: int Default: 20
lp.update.redeployClientConfigs. numberOfRetries	Maximum number of times to retry deploying Cloudera Manager client configurations; -1 = unlimited. Type: int Default: 5
lp.update.redeployClientConfigs. sleepAfterFailureInSeconds	Wait time between attempts to deploy Cloudera Manager client configurations, in seconds. Type: int Default: 10
lp.update.restartCluster. numberOfRetries	Maximum number of times to retry a Cloudera Manager rolling restart; -1 = unlimited. Type: int Default: 5
lp.update.restartCluster. rollingRestartSlaveBatchSize	Number of instances with Cloudera Manager worker roles to restart at a time. Type: int Default: 20
lp.update.restartCluster. rollingRestartSlaveFailCountThreshold	Threshold for number of worker host batches that are allowed to fail to restart before the entire command is considered failed (advanced use only). Type: int Default: 0
lp.update.restartCluster. rollingRestartSleepSeconds	Number of seconds to sleep between restarts of Cloudera Manager worker host batches. Type: int Default: 0
lp.update.restartCluster. sleepAfterFailureInSeconds	Wait time between attempts to perform a Cloudera Manager rolling restart, in seconds. Type: int Default: 10
lp.validate.dumpTemplates	Whether to output validated configuration data as JSON. Type: boolean Default: false
lp.webapp.anonymousUsageDataAllowed	Allow Cloudera Director to send anonymous usage information to help Cloudera improve the product. Type: boolean Default: true
lp.webapp.documentationType	Whether Cloudera Director opens the latest help from the Cloudera web site (online) or locally installed help (embedded). Type: enumerated string {ONLINE, EMBEDDED} Default: ONLINE
port	Cloudera Director server port (server only). Type: int Default: 7189
server.sessionTimeout	Cloudera Director server session timeout (server only). Type: int Default: 18000

Categories: Cloudera Manager | Configuring | Director | Properties | All Categories

Defining External Databases

Setting Cloudera Manager Configurations