Cloudera Management Service

Displaying the Cloudera Management Service Status

1. Do one of the following:
   • Select Clusters > Cloudera Management Service > Cloudera Management Service.
   • On the Home > Status tab, in Cloudera Management Service table, click the Cloudera Management Service link.

Starting the Cloudera Management Service

Minimum Required Role: Cluster Administrator (also provided by Full Administrator)

1. Do one of the following:
   • 1. Select Clusters > Cloudera Management Service > Cloudera Management Service.
     2. Select Actions > Start.
   • 1. On the Home > Status tab, click to the right of Cloudera Management Service and select Start.
2. Click Start to confirm. The Command Details window shows the progress of starting the roles.
3. When Command completed with n/n successful subcommands appears, the task is complete. Click Close.

Stopping the Cloudera Management Service

Minimum Required Role: Cluster Administrator (also provided by Full Administrator)

1. Do one of the following:
   • 1. Select Clusters > Cloudera Management Service > Cloudera Management Service.
     2. Select Actions > Stop.
   • 1. On the Home > Status tab, click to the right of Cloudera Management Service and select Stop.
2. Click Stop to confirm. The Command Details window shows the progress of stopping the roles.
3. When Command completed with n/n successful subcommands appears, the task is complete. Click Close.

Restarting the Cloudera Management Service

Minimum Required Role: Cluster Administrator (also provided by Full Administrator)

1. Do one of the following:
   • 1. Select Clusters > Cloudera Management Service > Cloudera Management Service.
     2. Select Actions > Restart.
   • On the Home > Status tab, click to the right of Cloudera Management Service and select Restart.
2. Click Restart to confirm. The Command Details window shows the progress of stopping and then starting the roles.
3. When Command completed with n/n successful subcommands appears, the task is complete. Click Close.

Starting and Stopping Cloudera Management Service Roles

Minimum Required Role: Navigator Administrator (also provided by Full Administrator)

1. Do one of the following:
   • Select Clusters > Cloudera Management Service > Cloudera Management Service.
   • On the Home > Status tab, in Cloudera Management Service table, click the Cloudera Management Service link.
2. Click the Instances tab.
3. Check the checkbox next to a role.
4. Do one of the following depending on your user role:

   • Minimum Required Role: Full Administrator

     Choose and action:
     • Select Actions for Selected > Start and click Start to confirm.
     • Select Actions for Selected > Stop and click Stop to confirm.

   • Minimum Required Role: Navigator Administrator (also provided by Full Administrator)

     1. Click a Cloudera Navigator Audit Server or Cloudera Navigator Metadata Server link.
     2. Choose an action:
        • Select Actions > Start this XXX and click Start this XXX to confirm, where XXX is the role name.
        • Select Actions > Stop this XXX and click Stop this XXX to confirm, where XXX is the role name.

Configuring Management Service Database Limits

Minimum Required Role: Cluster Administrator (also provided by Full Administrator)

Each Cloudera Management Service role maintains a database for retaining the data it monitors. These databases (as well as the log files maintained by these services) can grow quite large. For example, the Activity Monitor maintains data at the service level, the activity level (MapReduce jobs and aggregate activities), and at the task attempt level. Limits on these data sets are configured when you create the management services, but you can modify these parameters through the Configuration settings in the Cloudera Manager Admin Console. For example, the Event Server lets you set a total number of events to store, and Activity Monitor gives you "purge" settings (also in hours) for the data it stores.

There are also settings for the logs that these various services create. You can throttle how big the logs are allowed to get and how many previous logs to retain.

1. Do one of the following:
   • Select Clusters > Cloudera Management Service > Cloudera Management Service.
   • On the Home > Status tab, in Cloudera Management Service table, click the Cloudera Management Service link.
2. Click the Configuration tab.
3. Select Scope and then one of the following.
   • Activity Monitor - the Purge or Expiration period properties are found in the top-level settings for the role.
   • Host Monitor - see Data Storage for Monitoring Data.
   • Service Monitor
4. Select Category > Log Files to view log file size properties.
5. Edit the appropriate properties.

   If more than one role group applies to this configuration, edit the value for the appropriate role group. See Modifying Configuration Properties Using Cloudera Manager.

6. Click Save Changes.

Adding Cloudera Navigator Roles

Minimum Required Role: Navigator Administrator (also provided by Full Administrator)

1. Do one of the following:
   • Select Clusters > Cloudera Management Service > Cloudera Management Service.
   • On the Home > Status tab, in Cloudera Management Service table, click the Cloudera Management Service link.
2. Click the Instances tab.
3. Click the Add Role Instances button. The Customize Role Assignments page displays.
4. Assign the Navigator role to a host.
   1. Customize the assignment of role instances to hosts. The wizard evaluates the hardware configurations of the hosts to determine the best hosts for each role. The wizard assigns all worker roles to the same set of hosts to which the HDFS DataNode role is assigned. You can reassign role instances if necessary.

      Click a field below a role to display a dialog box containing a list of hosts. If you click a field containing multiple hosts, you can also select All Hosts to assign the role to all hosts, or Custom to display the pageable hosts dialog box.

      The following shortcuts for specifying hostname patterns are supported:

      • Range of hostnames (without the domain portion)

        Range Definition	Matching Hosts
        10.1.1.[1-4]	10.1.1.1, 10.1.1.2, 10.1.1.3, 10.1.1.4
        host[1-3].company.com	host1.company.com, host2.company.com, host3.company.com
        host[07-10].company.com	host07.company.com, host08.company.com, host09.company.com, host10.company.com

      • IP addresses
      • Rack name

      Click the View By Host button for an overview of the role assignment by hostname ranges.

5. When you are satisfied with the assignments, click Continue.
6. Choose the database type:
   • Keep the default setting of Use Embedded Database to have Cloudera Manager create and configure required databases. Record the auto-generated passwords.
     
     
     
     
   • Select Use Custom Databases to specify external database host, enter the database type, database name, username, and password for the database that you created when you set up the database.
   • If you are adding the Oozie service, you can change your Oozie configuration to control when data is purged in order to improve performance, cut down on database disk usage, improve upgrade performance, or to keep the history for a longer period of time. See Configuring Oozie Data Purge Settings Using Cloudera Manager.
7. Click Test Connection to confirm that Cloudera Manager can communicate with the database using the information you have supplied. If the test succeeds in all cases, click Continue; otherwise, check and correct the information you have provided for the database and then try the test again. (For some servers, if you are using the embedded database, you will see a message saying the database will be created at a later step in the installation process.)

   The Cluster Setup Review Changes screen displays.

8. Click Finish.

Deleting Cloudera Navigator Roles

Minimum Required Role: Navigator Administrator (also provided by Full Administrator)

1. Do one of the following:
   • Select Clusters > Cloudera Management Service > Cloudera Management Service.
   • On the Home > Status tab, in Cloudera Management Service table, click the Cloudera Management Service link.
2. Click the Instances tab.
3. Check the checkboxes next to the Navigator Audit Server and Navigator Metadata Server roles.
4. Do one of the following depending on your role:

   • Minimum Required Role: Full Administrator

     1. Check the checkboxes next to the Navigator Audit Server and Navigator Metadata Server roles.
     2. Select Actions for Selected > Stop and click Stop to confirm.

   • Minimum Required Role: Navigator Administrator (also provided by Full Administrator)

     1. Click the Navigator Audit Server role link.
     2. Select Actions > Stop this Navigator Audit Server and click Stop this Navigator Audit Server to confirm.
     3. Click the Navigator Metadata Server role link.
     4. Select Actions > Stop this Navigator Metadata Server and click Stop this Navigator Metadata Server to confirm.
5. Check the checkboxes next to the Navigator Audit Server and Navigator Metadata Server roles.
6. Select Actions for Selected > Delete. Click Delete to confirm the deletion.