Client/Server

Client/Server mode relies on a long-running Certificate Authority (CA) to issue certificates. The CA can be stopped when you're not bringing nodes online.

Server

CA server mode is invoked by running ./bin/tls-toolkit.sh server or bin\tls-toolkit.sh server.

Usage

To show help:
./bin/tls-toolkit.sh server -h

The following are available options:

  • -a,--keyAlgorithm <arg> Algorithm to use for generated keys (default: RSA)

  • --configJsonIn <arg> The place to read configuration info from (defaults to the value of configJson), implies useConfigJson if set (default: configJson value)

  • -d,--days <arg> Number of days issued certificate should be valid for (default: 825)

  • -D,--dn <arg> The dn to use for the CA certificate (default: CN=YOUR_CA_HOSTNAME,OU=NIFI)

  • -f,--configJson <arg> The place to write configuration info (default: config.json)

  • -F,--useConfigJson Flag specifying that all configuration is read from configJson to facilitate automated use (otherwise configJson will only be written to)

  • -g,--differentKeyAndKeystorePasswords Use different generated password for the key and the keystore

  • -h,--help Print help and exit

  • -k,--keySize <arg> Number of bits for generated keys (default: 2048)

  • -p,--PORT <arg> The port for the Certificate Authority to listen on (default: 8443)

  • -s,--signingAlgorithm <arg> Algorithm to use for signing certificates (default: SHA256WITHRSA)

  • -T,--keyStoreType <arg> The type of keystores to generate (default: jks)

  • -t,--token <arg> The token to use to prevent MITM (required and must be same as one used by clients)

Client

The client can be used to request new Certificates from the CA. The client utility generates a keypair and Certificate Signing Request (CSR) and sends the CSR to the Certificate Authority. CA client mode is invoked by running ./bin/tls-toolkit.sh client or bin\tls-toolkit.sh client.

#usage-10Usage

To show help:

./bin/tls-toolkit.sh client -h

The following are available options:

  • -a,--keyAlgorithm <arg> Algorithm to use for generated keys (default: RSA)

  • -c,--certificateAuthorityHostname <arg> Hostname of NiFi Certificate Authority (default: localhost)

  • -C,--certificateDirectory <arg> The directory to write the CA certificate (default: .)

  • --configJsonIn <arg> The place to read configuration info from, implies useConfigJson if set (default: configJson value)

  • -D,--dn <arg> The DN to use for the client certificate (default: CN=<localhost name>,OU=NIFI) (this is auto-populated by the tool)

  • -f,--configJson <arg> The place to write configuration info (default: config.json)

  • -F,--useConfigJson Flag specifying that all configuration is read from configJson to facilitate automated use (otherwise configJson will only be written to)

  • -g,--differentKeyAndKeystorePasswords Use different generated password for the key and the keystore

  • -h,--help Print help and exit

  • -k,--keySize <arg> Number of bits for generated keys (default: 2048)

  • -p,--PORT <arg> The port to use to communicate with the Certificate Authority (default: 8443)

  • --subjectAlternativeNames <arg> Comma-separated list of domains to use as Subject Alternative Names in the certificate

  • -T,--keyStoreType <arg> The type of keystores to generate (default: jks)

  • -t,--token <arg> The token to use to prevent MITM (required and must be same as one used by CA)

After running the client you will have the CA's certificate, a keystore, a truststore, and a config.json with information about them as well as their passwords.

For a client certificate that can be easily imported into the browser, specify: -T PKCS12.