Install and Configure MariaDB for Cloudera Software
To use a MariaDB database, follow these procedures. For information on compatible versions of MariaDB, see Database Requirements.
Installing MariaDB Server
- Install MariaDB server:
OS Command RHEL compatible
sudo yum install mariadb-server
sudo apt-get install mariadb-serverIf these commands do not work, you might need to add a repository or use a different
yum installcommand, particularly on RHEL 6 compatible operating systems. For more assistance, see the following topics on the MariaDB website:
Configuring and Starting the MariaDB Server
- Stop the MariaDB server if it is running:
OS Command RHEL 7 Compatible
sudo systemctl stop mariadb
sudo service mariadb stop
- If they exist, move old InnoDB log files
/var/lib/mysql/to a backup location.
- Determine the location of the option file,
my.cnfso that it conforms to the following requirements:
- To prevent deadlocks, set the isolation level to
- The default settings in the MariaDB installations in most
distributions use conservative buffer sizes and memory usage.
Cloudera Management Service roles need high write throughput
because they might insert many records in the database. Cloudera
recommends that you set the
- Set the
max_connectionsproperty according to the size of your cluster:
- Fewer than 50 hosts - You can store more than one database
(for example, both the Activity Monitor and Service Monitor)
on the same host. If you do this, you should:
- Put each database on its own storage volume.
- Allow 100 maximum connections for each database and then add 50 extra connections. For example, for two databases, set the maximum connections to 250. If you store five databases on one host (the databases for Cloudera Manager Server, Reports Manager, and Hive metastore), set the maximum connections to 550.
- More than 50 hosts - Do not store more than one database on the same host. Use a separate host for each database/host pair. The hosts do not need to be reserved exclusively for databases, but each database should be on a separate host.
- Fewer than 50 hosts - You can store more than one database (for example, both the Activity Monitor and Service Monitor) on the same host. If you do this, you should:
- If the cluster has more than 1000 hosts, set
16M. Without this setting, the cluster may fail to start due to the following exception:
- Although binary logging is not a requirement for Cloudera Manager installations, it provides benefits such as MariaDB replication or point-in-time incremental recovery after a database restore. The provided example configuration enables the binary log. For more information, see The Binary Log.
Here is an option file with Cloudera recommended settings:
[mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock transaction-isolation = READ-COMMITTED # Disabling symbolic-links is recommended to prevent assorted security risks; # to do so, uncomment this line: symbolic-links = 0 # Settings user and group are ignored when systemd is used. # If you need to run mysqld under a different user or group, # customize your systemd unit file for mariadb according to the # instructions in http://fedoraproject.org/wiki/Systemd key_buffer = 16M key_buffer_size = 32M max_allowed_packet = 32M thread_stack = 256K thread_cache_size = 64 query_cache_limit = 8M query_cache_size = 64M query_cache_type = 1 max_connections = 550 #expire_logs_days = 10 #max_binlog_size = 100M #log_bin should be on a disk with enough free space. #Replace '/var/lib/mysql/mysql_binary_log' with an appropriate path for your #system and chown the specified folder to the mysql user. log_bin=/var/lib/mysql/mysql_binary_log #In later versions of MariaDB, if you enable the binary log and do not set #a server_id, MariaDB will not start. The server_id must be unique within #the replicating group. server_id=1 binlog_format = mixed read_buffer_size = 2M read_rnd_buffer_size = 16M sort_buffer_size = 8M join_buffer_size = 8M # InnoDB settings innodb_file_per_table = 1 innodb_flush_log_at_trx_commit = 2 innodb_log_buffer_size = 64M innodb_buffer_pool_size = 4G innodb_thread_concurrency = 8 innodb_flush_method = O_DIRECT innodb_log_file_size = 512M [mysqld_safe] log-error=/var/log/mariadb/mariadb.log pid-file=/var/run/mariadb/mariadb.pid # # include all files from the config directory # !includedir /etc/my.cnf.d
- To prevent deadlocks, set the isolation level to
- If AppArmor is running on the host where MariaDB is installed, you might need to configure AppArmor to allow MariaDB to write to the binary.
- Ensure the MariaDB server starts at boot:
OS Command RHEL 7 compatible
sudo systemctl enable mariadb
sudo chkconfig mariadb on
- Start the MariaDB server:
OS Command RHEL 7 Compatible
sudo systemctl start mysqld
sudo service mysql start
/usr/bin/mysql_secure_installationto set the MariaDB root password and other security-related settings. In a new installation, the
rootpassword is blank. Press the Enter key when you're prompted for the root password. For the rest of the prompts, enter the responses listed below in bold:
[...] Enter current password for root (enter for none): OK, successfully used password, moving on... [...] Set root password? [Y/n] Y New password: Re-enter new password: [...] Remove anonymous users? [Y/n] Y [...] Disallow root login remotely? [Y/n] N [...] Remove test database and access to it [Y/n] Y [...] Reload privilege tables now? [Y/n] Y [...] All done! If you've completed all of the above steps, your MariaDB installation should now be secure. Thanks for using MariaDB!
Installing the MySQL JDBC Driver for MariaDB
The MariaDB JDBC driver is not supported. Follow the steps in this section to install and use the MySQL JDBC driver instead.
Install the JDBC driver on the Cloudera Manager Server host, as well as any other hosts running services that require database access.
Creating Databases for Cloudera Software
- Cloudera Manager Server
- Cloudera Management Service roles:
- Reports Manager
- Data Analytics Studio (DAS) Supported with PostgreSQL only.
- Each Hive metastore
- Data Analytics Studio
- Schema Registry
- Streams Messaging Manager
- Log in as the
rootuser, or another user with privileges to create database and grant privileges:
mysql -u root -p
- Create databases for each service deployed
in the cluster using the following commands. You can use any value
you want for the <database>,
<user>, and <password>
parameters. The Databases for Cloudera Software table, below
lists the default names provided in the Cloudera Manager
configuration settings, but you are not required to use
Configure all databases to use the
Include the character set for each database when you run the
CREATE DATABASEstatements described below.
CREATE DATABASE <database> DEFAULT CHARACTER SET utf8 DEFAULT COLLATE utf8_general_ci;
Query OK, 1 row affected (0.00 sec)
GRANT ALL ON <database>.* TO '<user>'@'%' IDENTIFIED BY '<password>';
Query OK, 0 rows affected (0.00 sec)
Table 1. Databases for Cloudera Software Service Database User Cloudera Manager Server scm scm Reports Manager rman rman Hue hue hue Hive Metastore Server metastore hive Oozie oozie oozie Data Analytics Studio (DAS) Supported with PostgreSQL only. das das Schema Registry schemaregistry schemaregistry Streams Messaging Manager smm smm
- Confirm that you have created all of the
SHOW DATABASES;You can also confirm the privilege grants for a given user by running:
SHOW GRANTS FOR '<user>'@'%';
- Record the values you enter for database names, usernames, and passwords. The Cloudera Manager installation wizard requires this information to correctly connect to these databases.
- If you plan to use Apache Ranger, see the following topic for instructions on creating and configuring the Ranger database. See Configuring a Ranger or Ranger KMS Database: MySQL/MariaDB.
- If you plan to use Schema Registry or Streams Messaging Manager, see the following topic for instructions on configuring the database: Configuring the Database for Streaming Components
- After you install and configure PostgreSQL databases for Cloudera software, continue to Step 5: Set up the Cloudera Manager Database to configure a database for Cloudera Manager.