Known Issues in Apache Impala

Learn about the known issues in Impala, the impact or changes to the functionality, and the workaround.

CDPD-28431: Intermittent errors could be potentially encountered when Impala UI is accessed from multiple Knox nodes.
You must use a single Knox node to access Impala UI.
DOCS-10174: To access impala api calls via knox and if knox have customized kerberos principal name with default service user name, then configuration "authorized_proxy_user_config" from Clusters->impala->configuration should have below as one of the comma separated list of values <knox_custom_kerberos_principal_name>=*"
Where <knox_custom_kerberos_principal_name> is the value of the Kerberos Principal in the Knox service. Select Clusters>Knox>Configuration and search for Kerberos Principal to display this value..
DOCS-10038: If you are querying transactional (ACID) tables with an Impala Virtual Warehouse and compaction is run on the compacting Hive Virtual Warehouse, the query might fail. The compacting process deletes files and the Impala Virtual Warehouse might now be aware of the deletion. Then when the Impala Virtual Warehouse attempts to read the deleted file, an error can occur. This situation occurs randomly.
CDPD-21828: Multiple permission assignment through grant is not working
DOCS-8397: The KB article ERROR: "AnalysisException: No matching function with signature: mask(FLOAT)" when Impala jobs fail with No matching function with signature: mask(FLOAT) describes the behavior when we configure masking on tables via Ranger. It works for Hive, it breaks queries in some scenarios for Impala.
The use-case of masking tables via Ranger might be a case driver. We have an existing case for this already under 737048.
HADOOP-15720: Queries stuck on failed HDFS calls and not timing out
In Impala 3.2 and higher, if the following error appears multiple times in a short duration while running a query, it would mean that the connection between the impalad and the HDFS NameNode is in a bad state.
"hdfsOpenFile() for <filename> at backend <hostname:port> failed to finish before the <hdfs_operation_timeout_sec> second timeout " 
In Impala 3.1 and lower, the same issue would cause Impala to wait for a long time or not respond without showing the above error message.
Restart the impalad.
IMPALA-532: Impala should tolerate bad locale settings
If the LC_* environment variables specify an unsupported locale, Impala does not start.
Add LC_ALL="C" to the environment settings for both the Impala daemon and the Statestore daemon.
IMPALA-5605: Configuration to prevent crashes caused by thread resource limits
Impala could encounter a serious error due to resource usage under very high concurrency. The error message is similar to:

F0629 08:20:02.956413 29088] LLVM hit fatal error: Unable to allocate section memory!
terminate called after throwing an instance of 'boost::exception_detail::clone_impl<boost::exception_detail::error_info_injector<boost::thread_resource_error> >'

To prevent such errors, configure each host running an impalad daemon with the following settings:

            echo 2000000 > /proc/sys/kernel/threads-max
            echo 2000000 > /proc/sys/kernel/pid_max
            echo 8000000 > /proc/sys/vm/max_map_count
Add the following lines in /etc/security/limits.conf:

            impala soft nproc 262144
            impala hard nproc 262144
Avro Scanner fails to parse some schemas
The default value in Avro schema must match type of first union type, e.g. if the default value is null, then the first type in the UNION must be "null".
Swap the order of the fields in the schema specification. For example, use ["null", "string"] instead of ["string", "null"]. Note that the files written with the problematic schema must be rewritten with the new schema because Avro files have embedded schemas.
IMPALA-691: Process mem limit does not account for the JVM's memory usage
Some memory allocated by the JVM used internally by Impala is not counted against the memory limit for the impalad daemon.
To monitor overall memory usage, use the top command, or add the memory figures in the Impala web UI /memz tab to JVM memory usage shown on the /metrics tab.
IMPALA-9350: Ranger audit logs for applying column masking policies missing
Impala is not producing these logs.
IMPALA-1024: Impala BE cannot parse Avro schema that contains a trailing semi-colon
If an Avro table has a schema definition with a trailing semicolon, Impala encounters an error when the table is queried.
Remove trailing semicolon from the Avro schema.
IMPALA-1652: Incorrect results with basic predicate on CHAR typed column
When comparing a CHAR column value to a string literal, the literal value is not blank-padded and so the comparison might fail when it should match.
Use the RPAD() function to blank-pad literals compared with CHAR columns to the expected length.
IMPALA-1821: Casting scenarios with invalid/inconsistent results
Using a CAST() function to convert large literal values to smaller types, or to convert special values such as NaN or Inf, produces values not consistent with other database systems. This could lead to unexpected results from queries.
IMPALA-2005: A failed CTAS does not drop the table if the insert fails
If a CREATE TABLE AS SELECT operation successfully creates the target table but an error occurs while querying the source table or copying the data, the new table is left behind rather than being dropped.
Drop the new table manually after a failed CREATE TABLE AS SELECT
IMPALA-2422: % escaping does not work correctly when occurs at the end in a LIKE clause
If the final character in the RHS argument of a LIKE operator is an escaped \% character, it does not match a % final character of the LHS argument.
IMPALA-2603: Crash: impala::Coordinator::ValidateCollectionSlots
A query could encounter a serious error if includes multiple nested levels of INNER JOIN clauses involving subqueries.
IMPALA-3094: Incorrect result due to constant evaluation in query with outer join
An OUTER JOIN query could omit some expected result rows due to a constant such as FALSE in another join clause. For example:

explain SELECT 1 FROM alltypestiny a1
  INNER JOIN alltypesagg a2 ON a1.smallint_col = a2.year AND false
  RIGHT JOIN alltypes a3 ON a1.year = a1.bigint_col;
| Explain String                                          |
| Estimated Per-Host Requirements: Memory=1.00KB VCores=1 |
|                                                         |
| 00:EMPTYSET                                             |

IMPALA-3509: Breakpad minidumps can be very large when the thread count is high
The size of the breakpad minidump files grows linearly with the number of threads. By default, each thread adds 8 KB to the minidump size. Minidump files could consume significant disk space when the daemons have a high number of threads.
Add -\-minidump_size_limit_hint_kb=size to set a soft upper limit on the size of each minidump file. If the minidump file would exceed that limit, Impala reduces the amount of information for each thread from 8 KB to 2 KB. (Full thread information is captured for the first 20 threads, then 2 KB per thread after that.) The minidump file can still grow larger than the "hinted" size. For example, if you have 10,000 threads, the minidump file can be more than 20 MB.
IMPALA-4978: Impala requires FQDN from hostname command on Kerberized clusters
The method Impala uses to retrieve the host name while constructing the Kerberos principal is the gethostname() system call. This function might not always return the fully qualified domain name, depending on the network configuration. If the daemons cannot determine the FQDN, Impala does not start on a Kerberized cluster.
Test if a host is affected by checking whether the output of the hostname command includes the FQDN. On hosts where hostname, only returns the short name, pass the command-line flag ‑‑hostname=fully_qualified_domain_name in the startup options of all Impala-related daemons.
IMPALA-6671: Metadata operations block read-only operations on unrelated tables
Metadata operations that change the state of a table, like COMPUTE STATS or ALTER RECOVER PARTITIONS, may delay metadata propagation of unrelated unloaded tables triggered by statements like DESCRIBE or SELECT queries.
IMPALA-7072: Impala does not support Heimdal Kerberos
OPSAPS-46641: A single parameter exists in Cloudera Manager for specifying the Impala Daemon Load Balancer. Because BDR and Hue need to use different ports when connecting to the load balancer, it is not possible to configure the load balancer value so that BDR and Hue will work correctly in the same cluster.
The workaround is to use the load balancer configuration either without a port specification, or with the Beeswax port: this will configure BDR. To configure Hue use the "Hue Server Advanced Configuration Snippet (Safety Valve) for impalad_flags" to specify the the load balancer address with the HiveServer2 port.
Some of the unresolved issues include:
  • IMPALA-6841
  • HADOOP-15720
  • IMPALA-635